The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products. Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy. Counter with mechanical readout (SU) Working principle of Flow Meter OGM-25/40 The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries. Advantages of Oval Gear Flow Meter Compact structure Easy maintenance Easy to read and operate mechanical display Flexible installation Low pressure drop
Offer Especially for the Buyer. The prices exclusively CIF UREA has been recognized for its quality by local and international producers, 1. Product Name: UREA N46 Quantity: Minimum 10,000 MT-Maximum 500,000 MT Trial / Monthly Shipment GRADE PRILLED UREA Price - $420 Gross / $380 Net per MT GRANULAR UREA Price - $410 Gross / $370 Net per MT 2. Product Name: DI-AMMONIUM PHOSPHATE (DAP) Quantity: Minimum 10,000 MT Maximum 500,000 MT Trial / Monthly Shipment GRADE ALL GRADES Price - $470 Gross / $430 Net per MT 3. Product Name: NPK Quantity: Minimum 10,000 MT-Maximum 500,000 MT Trial / Monthly Shipment GRADE ALL GRADES Price - $440 Gross / $400 Net per MT Origin: Georgia/Kazakhstan Specification & Grade: Standard Export Quality and Grade Inspection: Ciq, Sgs or Equivalent Performance Bond: (Pb) 2% Performance Bond (Pb) in Favor of Buyer Payment Term: T/t, Mt 103, Sblc Mt760 & Dlc Mt700 Contract Term: Trial Shipment + Contract With Rolls & Extension Shipment & Delivery Method: Cif via Vessel to Buyers Destination/discharge Port. Other Products Available: Fuel Oil,naphtha,liquefied Natural Gas (Lng), Liquefied Petroleum Gas (Lpg) Liquefied Natural Gas (Lng) Crude Oil, Aviation Kerosene Turbine, Fuel, diesel Fuel, bitumen, gasoline Octanes, base Oil, Ethanol, methanol, petroleum Coke. FERTILIZER Urea N - NPK - DAP. Thank You For Your Interest In Our Products If You Are Interested In Any Product We Will Send You The Procedure.
TO: END BUYER SOFT CORPORATE OFFER - CIF Offer Especially for the Buyer. Product Name: GASOLINE OCTANES Quantity: Minimum 50,000 Mt Maximum 500,000 Mt Trial / Monthly Shipment GRADE 87 OCTANES Price - $320 Gross / $280 Net per MT 89 OCTANES Price - $310 Gross / $270 Net per MT 91 OCTANES Price - $340 Gross / $300 Net per MT 93 OCTANES Price - $370 Gross / $330 Net per MT 95 OCTANES Price - $350 Gross / $310 Net per MT 97 OCTANES Price - $360 Gross / $320 Net per MT Zaor/sco - Validity Limited To: End Buyer Soft Corporate Offer - Cif We, in Name of the Seller, ******** Refinery, Hereby Issue This So Corporate Offer (Sco) for All Petroleum Products We Supply for Immediate Delivery on a Cif Basis: Details / Information Origin: Georgia/kazakhstan Specification & Grade: Standard Export Quality and Grade Inspection: Ciq, Sgs or Equivalent Performance Bond: (Pb) 2% Performance Bond (Pb) in Favor of Buyer Payment Term: T/t, Mt 103, Sblc Mt760 & Dlc Mt700 Contract Term: Trial Shipment + Contract With Rolls & Extension Shipment & Delivery Method: Cif via Vessel to Buyer Destination/discharge Port. Other Products Available: Fuel Oil,naphtha,liquefied Natural Gas (Lng), Liquefied Petroleum Gas (Lpg) Liquefied Natural Gas (Lng) Crude Oil,aviation Kerosene Turbine, Fuel,diesel Fuel,bitumen,gasoline Octanes,base Oil, Ethanol,methanol,petroleum Coke.
Offer Especially for the Buyer. Product Name: Bitumen Quantity: Minimum 50,000 Mt Maximum 500,000 Mt Trial / Monthly Shipment Grade Bitumen 30/40 Price - $300 Gross / $260 Net Per Mt Bitumen 40/50 Price - $320 Gross / $280 Net Per Mt Bitumen 50/70 Price - $340 Gross / $300 Net Per Mt Bitumen 60/70 Price - $370 Gross / $330 Net Per Mt Bitumen 80/100 Price - $360 Gross / $320 Net Per Mt Bitumen 100/120 Price - $330 Gross / $290 Net Per Mt Viscosity Grade-10 (Vg-10) Price - $280 Gross / $240 Net Per Mt Viscosity Grade-20 (Vg-20) Price - $300 Gross / $260 Net Per Mt Viscosity Grade-30 (Vg-30) Price - $290 Gross / $250 Net Per Mt Viscosity Grade-40 (Vg-40) Price - $320 Gross / $280 Net Per Mt Zaor/sco - Validity Limited To: End Buyer Soft Corporate Offer - Cif We, in Name of the Seller, ******** Refinery, Hereby Issue This Soô??? Corporate Offer (Sco) for All Petroleum Products We Supply for Immediate Delivery on a Cif Basis: Details / Information Origin: Georgia/kazakhstan Specification & Grade: Standard Export Quality and Grade Inspection: Ciq, Sgs or Equivalent Performance Bond: (Pb) 2% Performance Bond (Pb) in Favor of Buyer Payment Term: T/t, Mt 103, Sblc Mt760 & Dlc Mt700 Contract Term: Trial Shipment + Contract With Rolls & Extension Shipment & Delivery Method: Cif via Vessel to Buyerâ??s Destination/discharge Port. Other Products Available: Fuel Oil,naphtha,liquefied Natural Gas (Lng), Liquefied Petroleum Gas (Lpg) Liquefied Natural Gas (Lng) Crude Oil,aviation Kerosene Turbine, Fuel,diesel Fuel,bitumen,gasoline Octanes,base Oil, Ethanol,methanol,petroleum Coke.
Ultra en590 diesel, jp54, jet a1, d2 diesel d6, ago, petcoke .
A 20-ton diesel forklift is a type of heavy-duty industrial forklift that is powered by a diesel engine and is capable of lifting loads weighing up to 20 tons. These forklifts are typically used in manufacturing, construction, and other industries that require the movement of large, heavy loads. They are known for their durability and power and often feature advanced features such as four-wheel drive, automatic transmission, and a variety of attachments to make them suitable for a wide range of applications. Due to the high power and heavy loads, they can handle they are required to be operated by trained and certified personnel. Features 1)Drive axle and braking system: The drive axle with a fully enclosed wet brake is adopted. The axle is an oil-cooled, hydraulically controlled handbrake. The axle housing has high strength and large bearing capacity, and at the same time fully considers the stress effect caused by the impact load of the vehicle under various complex and harsh working conditions, which is safe and has a long service life. The brake flushing system is equipped with a buzzer alarm for insufficient brake pressure, and protection devices such as the gearbox disengagement (indicator light) when braking. 2) Steering axle: The horizontal cylinder-type steering axle is used. Under working conditions, the forklift has sufficient steering force to control the steering of the forklift, so that the yaw and steering resistance of the wheels are small. The steering trapezoid design is reasonable, which can reduce tire wear. 3)Mast and frame: The wide-view gantry is used, which has high strength and rigidity, and will not deform under complex and harsh working conditions, prolonging the service life of the gantry and providing drivers with a good vision. The surface of the gantry rollers is specially treated for long-term anti-wear properties. 4)Cab: The cab is spacious and bright, with a wide field of vision. The inner seat and joystick are designed according to the ergonomic theory, and the operation is easy, flexible and comfortable. Weight-adjustable air pressure shock absorbers are installed under the seat. Combination instrument, beautiful appearance, small size, including steering column and steering wheel, and the steering wheel can be adjusted back and forth to provide spacious space for operation, inspection and maintenance. The standard air-conditioning system creates a comfortable working environment for the operator, and the standard reversing image provides the operator with a safe and standardized use environment. Learn more
A 20 ton diesel forklift is a type of heavy-duty industrial forklift that is powered by a diesel engine and is capable of lifting loads weighing up to 20 tons. These forklifts are typically used in manufacturing, construction, and other industries that require the movement of large, heavy loads. They are known for their durability and power, and often feature advanced features such as four-wheel drive, automatic transmission, and a variety of attachments to make them suitable for a wide range of applications. Due to the high power and heavy loads, they can handle they are required to be operated by trained and certified personnel. Features 1. Drive axle and braking system: The drive axle with a fully enclosed wet brake is adopted. The axle is an oil-cooled, hydraulically controlled handbrake. The axle housing has high strength and large bearing capacity, and at the same time fully considers the stress effect caused by the impact load of the vehicle under various complex and harsh working conditions, which is safe and has a long service life. The brake flushing system is equipped with a buzzer alarm for insufficient brake pressure, and protection devices such as the gearbox disengagement (indicator light) when braking. 2. Steering axle: The horizontal cylinder-type steering axle is used. Under working conditions, the forklift has sufficient steering force to control the steering of the forklift, so that the yaw and steering resistance of the wheels are small. The steering trapezoid design is reasonable, which can reduce tire wear. 3. Mast and frame: The wide-view gantry is used, which has high strength and rigidity, and will not deform under complex and harsh working conditions, prolonging the service life of the gantry and providing drivers with a good vision. The surface of the gantry rollers is specially treated for long-term anti-wear properties. 4.Cab: The cab is spacious and bright, with a wide field of vision. The inner seat and joystick are designed according to the ergonomic theory, and the operation is easy, flexible and comfortable. Weight-adjustable air pressure shock absorbers are installed under the seat. Combination instrument, beautiful appearance, small size, including steering column and steering wheel, and the steering wheel can be adjusted back and forth to provide spacious space for operation, inspection and maintenance. The standard air-conditioning system creates a comfortable working environment for the operator, and the standard reversing image provides the operator with a safe and standardized use environment.
EXPLANATION: It is small in size, large in function, very easy to carry and use, you can easily transfer to your tractor and vehicles in the field, in the garden, in the garage, with tankers and barrels. It is made of durable and high quality material with its aluminum body structure. Thanks to the durable and high quality intermediate button, the stop and start commands are in the hands of the user and provide great convenience. DZY - 12 Volt B�°G Submersible Liquid Transfer Pump; With its extremely useful, portable, water - resistant structure, it provides better performance, transfer, pressure increase and convenience. Level DC pumps, in cases where AC (220 volts) electrical connection is not available or operation is required in different areas, allow easy connection to vehicle batteries with its 3 meter cable and battery clips, and become your biggest assistant in your liquid transfer processes. Our pumps are guaranteed against manufacturing faults and you should receive your pump in working condition. It is not guaranteed against usage errors. In case of user - induced errors, repair, maintenance and repair services are provided according to the user's request. USAGE AREAS: Diesel transfer to your vehicles irrigation Aquarium filling and emptying Suitable for filling or emptying caravans and boats Tractor Harvester work machines, truck, trailer, caravan Fishing boats, dinghy etc. diesel in vehicles 0 - 10 oil, water Etc. It is used in filling, discharging and evacuation processes of liquid substances. INSTRUCTIONS FOR USE: Prevent leaking and air intake by using hose clamps on hose connections. Run for a maximum of 45 minutes and rest for 15 minutes without interruption. The pressure height is 3 meters from the ground. Do not run dry and idle. Never use in flammable and combustible materials such as gasoline, thinner, acid! Use 12 volt DZY pumps in 12V accumulators, use 24 volt DZY pumps in 24V accumulators! The 12 volt DZY submersible pump works on accumulators between 18 - 200 amps. The 24 volt DZY submersible pumps works on accumulators between 36 - 400 amps. TECHNICIAL SPECIFICATIONS: Voltaj: 12 V DC Kullan�±m Alanlar�±: Mazot, su, s�±v�± aktarma Rekor kal�±nl�±�?�±: 19 mm Litre/ Dk: 20 - 25 LT. Amper: Max. 2 Amper Kablo Boyu: 3 metre Airlik: 540 Gr Sirekli Ialima: 45 - 60 Dakika Dinlendirme: 15 - 20 Dakika Basin y kseklik: 4 Metre Uzunluk / ap: 20cm/ 50mm
Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
Garments, Non Perishables Food Items, Paper Products, Processed Food Items, Ceramics, Engineering Goods, Light Diesel Oil..
PRESSURE HOSE WITH TEXTILE FRAME GOST 18698-79 GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances. GOST 18698-79 GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances. The industry produces hoses with different inner diameters, which determine the performance of transporting a gas or liquid medium. Main varieties In accordance with GOST 18698-79, reinforced pressure hoses are divided into groups: �? â?? intended for the transportation of petroleum products and motor fuel (gasoline, diesel fuel and kerosene). Permissible temperature of mineral-based oils being pumped is -35...+100, and other liquids -35...+70. Used for transporting technical water without mechanical impurities, aqueous solutions of acids and alkalis (the share of the active substance is not more than 20%). It is possible to work when the flow is heated up to +50. Products are not used for pumping nitric acid, which destroys rubber walls. Intended for transportation of water heated up to +100. PAR 1 and PAR 2 - designed for pumping saturated water vapor at a temperature of +143C and +175C, respectively. Used to supply air with abrasive mechanical particles, for example, in power systems for sandblasting equipment. Pumping of weak aqueous mixtures of alkalis or acids is allowed. The operating temperature is in the range -35...+50. Additional differences In accordance with the GOST 18698-79 standard, the products have 3 versions for different external conditions. The industry offers products for temperate, tropical and cold climates. When selecting products, the temperature of the ambient air (for outdoor installation) and the transported medium are taken into account. The standard provides for the release of hoses that can withstand gas or liquid pressure of 6.3, 10, 16 and 20 atm. The company has a stock of hoses of the main standard sizes. In the absence of the required quantity of products, the delivery time is from 5 to 10 working days, necessary for the production of the required batch of rubber-reinforced hoses. In the absence of the desired item in the catalog, you should submit a request by e-mail or phone to calculate the delivery time and price of rubber products. Rubber hoses Class "(I)" - Gasoline, kerosene, petroleum-based mineral oils Rubber sleeves Class "" - Antistatic gasoline, kerosene, petroleum-based mineral oils Rubber sleeves Class "B(II)" - Industrial water
The metering fuel nozzle LLY-25 series is a combination of horizontal screw-wing flow meter and fuel gun. It is a meter instrument used to measure the volume flow rate of liquid (petrol, diesel, engine oil, hydraulic oil, etc.) flowing through the pipeline. In virtue of reliable performance, this metering fuel nozzle LLY-25 is suitable for filling petrol and other light oil products. Metering fuel nozzle LLY-25 is used for on-farm accounting, both in stationary installations and in ground-based refueling and pumping facilities. It is used as a pistol for refueling in small settlements at gas stations of a local scale. Technical Parameter â??Conditional pass â?? 25 mm â??Working pressure â?? 1 MPa â??Permissible error: �±1% â??Min.flow â?? 25 L/min â??Max flow â?? 120 L/min â??Division price â?? 1 L â??Max. set dose â?? 9999 L â??Operating temperature from -20 to +50 Working Principle Having roller pointers for a one-time count of the amount of liquid, the gun with a counter serves to count the amount of fuel that has passed through it. Roller disposable pointer crane LLY has a device for setting the readings to zero. Accounting for the amount of liquid that has passed through the counter gun is based on counting the number of revolutions of the drive screw inside the fuel dispenser gun. The flow of the measured fuel, entering the meter and passing through the volume meter, loses part of the pressure to create a torque that causes the screws to rotate. The measurement of the amount of liquid by a pistol with a counter occurs due to the periodic cutting off of certain volumes of it contained in the cavities between the cylindrical bores of the holder and the screws. This device is a combination of the simplest fuel dispenser gun and fuel meter, the accuracy and performance of which are inferior to industrial designs. Pressing the lever opens the valve, fuel flows through the gun. When the faucet lever is released, the valve closes under the action of a spring, blocking the flow of liquid. The adjusting screw is intended for equipment calibration. The drain pipe of the dispensing gun with a counter is used to direct the liquid into the container when refueling.
Boxcooler is a heat-exchange cooling system especially designed for the marine commercial ships. This system does not need outboard secondary cooling water line. Therefore, there is no need to use cooling water pumps, filters, valve parts, pipelines and other parts that require maintenance. Compared to other solutions, boxcoolers are less prone to corrosion and attachment to marine life. It is also energy-saving. In a conventional cooling water system, a 15 kW secondary pumps consume about 3 liters of oil per hour. Boxcoolers can save 15,000 liters of oil based on an average 5000hours running time per year. Box coolers are best suited for operation in areas with ice, mud, sands or pollution. In fact, the box cooler is maintenance-free, so its operating cost is lower than any other cooling system. Boxcooler may be placed either athwart ship or along ship. They are obviously very compact and suitable for river water and brackish water. With a coating they are also suitable for seawater. Standard delivery includes a welding edge which makes drilling or tapping of holes unnecessary. The interior is demountable if the top equals the empty waterline. TUF boxcoolers are suitable for various ships like tug-boats, Dredgers, Engineering ships, Cargo ships, Ferry boats, fishing vessel, fish Well boat, hydrographic survey vessel, dredger, drag boat, motor barges, platform supply vessel PSV , ice breakers, ferries, reefers, cargo freighters, Refrigerator ships, Barges, Transport ships, Supply ships, Icebreakers, Oil tankers and etc. They are compact in design and well coated with Anti-corrosive thermal spray phenolic resin (for salty-water- going vessels). For areas where there is a potential for biological contamination, special anti-fouling system is a good solution. The Impressed Current Anti-fouling System ( ICAF ) is a very effective biofouling method. The pure copper anode is mounted below the box cooler in the sea chest. A constant current is applied between the anode and the hull (mass) to dissolve the copper in the seawater. These copper ions create a continuous toxic environment that prevents precipitation. There are ME (main engine) HT High temperature and LT Low temperature boxcooler, DG (diesel generator) boxcooler, RP boxcoolers and etc. Our boxcoolers are approved by LR, DNV-GL, KR, ABS, CCS, NK, RINA, BV, RMRS (RS) We can provide the life circle service for your products and take full responsibility to your orders.
Product INFORMATION ----------------------------------------------------------------------------------- Product: AUTOMOTIVE GAS OIL (AGO) Origin: RUSIA, KAZAKHSTAN, CHINA Delivery Terms: CIF ANY SAFE WORLD PORT (ASWP) Trail Quantity: 30,000 METRIC TONS Price: USD$450 PER METRIC TON Payment terms: DLC(MT700), SBLC(MT760), MT103(TT WIRING) TRANSFER SPECIFICATIONS ------------------------------------------------------------------------------------- PARAMETER TEST METHOD IP/ASTM LIMITS Specific Gravity 15/15 deg C 160 / D1298 0.820min, 0.870 max Distillation: Recovered @ 357 deg C (% Vol. EBP deg.) 123 / D86 90 min, 385 max Color (ASTM) D 150000 3 max Flash Point (deg. C) 34 / D93 66 Total Sulphur ( % wt) x-ray 0.3 max Copper Corrosion (3 hr @ 100 deg. C) 154 / D130 No. 1 Strip max Kinematic Viscosity @ 38 deg. C (Cst) 71 / D445 1.6 5.5 Cloud Point (deg. C) 219 / D2500 4.4 max Carbon residue (% wt.) D189 0.15 max Acidity (inorganic acid) Nil Total Acid Number (mg KOH/gm) 139 / D974 0.50 max Ash Content (% wt.) 4 / D482 0.01 max Sediment (% wt.) 53 / D473 0.01 max Water by Distillation 74 / D95 0.05% max Diesel Index IP 21 47 min
Feed Hammer Mill / Feed Hammer Crusher / Hammer Mill for Feed / Feed Flour Mill Hammer Mill Crusher / Hammer Mill Grinder / Grain Grinder / Powder Crusher / Flour Hammer Mill Crusher� / Hammer Type Grinding Mill / Corn Cob Crusher Product Description: Features of hammer mill crusher: 1.� Compact structure, small size, light weight; with steel structure. 2.Safety and reliable: special device to stop the feeding knife accidents. 3.� Support various power devices: electric motor, diesel engine, and tractor. 4.High quality steel Blades, super wear resistant. 5.Adjustable output sizes: accordingly by manual method. 6.Better feeding device: new design feeding roller added before pressing roller. This crushing and mixing machine, set self-priming, crushing, mixing as one, mainly crushing both forestry and agricultural material, brittle and fibrous material. After the raw materials are fully mixed and crushed, the composition ratio is uniform and the nutrition is balanced, Reduce picky eating of poultry and livestock. It is suitable for mixing and crushing of livestock feed such as pigs, cattle, horses, rabbits, chickens, fish, etc. It is applicable to individual farmers, small feed farms, feed companies, grain and oil processing plants, wineries, breweries, chemical plants, pharmaceutical plants, etc. Production line:
Feed Hammer Mill / Feed Hammer Crusher / Hammer Mill for Feed / Feed Flour Mill Hammer Mill Crusher / Hammer Mill Grinder / Grain Grinder / Powder Crusher / Flour Hammer Mill Crusher� / Hammer Type Grinding Mill / Corn Cob Crusher Product Description: Features of hammer mill crusher: 1.� Compact structure, small size, light weight; with steel structure. 2.Safety and reliable: special device to stop the feeding knife accidents. 3.� Support various power devices: electric motor, diesel engine, and tractor. 4.High quality steel Blades, super wear resistant. 5.Adjustable output sizes: accordingly by manual method. 6.Better feeding device: new design feeding roller added before pressing roller. This crushing and mixing machine, set self-priming, crushing, mixing as one, mainly crushing both forestry and agricultural material, brittle and fibrous material. After the raw materials are fully mixed and crushed, the composition ratio is uniform and the nutrition is balanced, Reduce picky eating of poultry and livestock. It is suitable for mixing and crushing of livestock feed such as pigs, cattle, horses, rabbits, chickens, fish, etc. It is applicable to individual farmers, small feed farms, feed companies, grain and oil processing plants, wineries, breweries, chemical plants, pharmaceutical plants, etc. Production line: Other Information: Our company is mainly engaged in the development and manufacturing of agricultural machinery, food machinery, feed machinery, wood machinery, coal machinery and other machinery.
QAP can supply gaskets of all types - metal layer, metal-elastomer and metal-soft material - individually matched to the requirements of each particular engine.Cylinder-head gaskets have a crucial role to play in the advancement of engine technology, particularly with respect to high-performance diesel engines and petrol engines with direct injection. In an internal combustion engine, a head gasket provides the seal between the engine block and cylinder head(s). Its purpose is to seal the combustion gases within the cylinders and to avoid coolant or engine oil leaking into the cylinders. Leaks in the head gasket can cause poor engine running and/or overheating. We are specialists in the design and manufacture of high performance cylinder head gaskets, sealings for the automotive engines..Our company production goods cater for cars, motorcycles trucks and stationary engines, with most of our focus on high performance and vintage/veteran cars. Although we regularly produce our products for John Deere, Mercedes-Benz, BMW, Audi, Volkswagen, Ford, Volvo ,Toyota,Honda,Mazda,Nissan,Hyundai,Kia and so on., we can cater for any make of engine. So whether your need is for commonly-produced gaskets, or something completely out of the ordinary, we can help you. We also list some items OE number we have developed and sealing in the markets as follows: 026103383K 11141A78B01-00 032103383N 10169200 26191PT 12611196 55562233 11621732969 18407530606 ME013536 35852 1107400 028129589B 14040100 056103609B 14024000 11214-20030 1L2Z6584AA 11213-20020 11213-0H010 12637683
Product Description: 1.Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2..Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. the chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
1. Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2. Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. The chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm
