Man made synthetic multifilament yarn, polypropylene, polyester, narrow fab, hosiery tape and dog belt using polypropylene polymer, polypropylene in all colors and denier range with qualities like crimp yarn, textured yarn, crimp twisted yarn, poy & fdy.Manufacturing
Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis with a rotation angle of 0 �°~90 �°. When the rotation angle reaches 90 �°, the valve is fully open. The butterfly valve is simple in structure, small in volume and light in weight, and only consists of a few parts. Moreover, the valve can be quickly opened and closed only by rotating 90 �°, which is simple to operate. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two sealing types: elastic seal and metal seal. For elastic sealing valves, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. The valve with metal seal is generally longer than the valve with elastic seal, but it is difficult to achieve complete sealing. The metal seal can adapt to higher working temperature, while the elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used for flow control, the main thing is to correctly select the size and type of the valve. The structure principle of butterfly valve is especially suitable for making large diameter valves. Butterfly valves are not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also used in the cooling water system of thermal power plants. There are two kinds of butterfly valves commonly used: wafer type butterfly valve and flange type butterfly valve. Wafer type butterfly valve uses stud bolts to connect the valve between two pipe flanges. Flange type butterfly valve has flanges on the valve, and bolts are used to connect the flanges on both ends of the valve to the pipe flanges.
Our popular adult diaper making machine is a top choice for efficient production. With full servo technology and a PLC control system, this machine offers precision and control. It operates through a user-friendly touch screen interface, making it easy to manage. Configuration: Product structure: Leg cuff N.W,Top sheet N.W,Fluff core(with SAP) Side Tape,ELastic waistband,Frontal tape,Back sheet. Product size: M: 680*450 L: 800*650 XL: 950*760 Control system: PLC control system,operating on the touch screen,man-machine interface Tension system: Leg cuff N.W,Top sheet N.W,elastic waistband,upper & down tissue,back sheet are A & B shaft active unwinding by Inverter motor. Drive system: Timing belt and flat belt are imported products,and all the key parts are imported bearings. Safety system: It has safety device on the operating side,matched with urgent stop switch,high audio fan uses sound insulation or silencer.
Model V222TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1000(736)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 191 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,830
Model V180TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 820(603)/2,300 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 187 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,630
Model V222TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 720(530)/1,800 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 129 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,750
Model V180TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 650(478)/2,100 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 141 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,550
Model V158TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 680(500)/2,300 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 10.89 Compression ratio 14.6 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 130 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,435
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Model V158TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 480(353)/1,800 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 8.52 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 85 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Ultra-lightweight, just over 7 lbs. Seriously protective, with Aeroflex foam that is resilient and minimizes force transferred to baby by absorbing and diffusing the energy. Adjustable headrest. No re-thread 5-point adjustable harness. Merino wool insert, exclusive to Bugaboo for optimal climate control and temperature regulation of baby. Sun canopy features an extendable Smart Shade, mesh peek-a-boo window, and UPF 50+ protection. Magnetic buckle holder. Ergonomic carry handle. 4-position recline base with clear guides for use as baby grows. Recline base features locking steel stability leg for improved vehicle fit, open belt path for easier installation, and a 4-position recline in the base. Belt path for rides without the use of a base. Compatible only with Bugaboo strollers: Donkey, Fox, Butterfly, Lynx, Bee, Ant, and Cameleon 3/3+*. Removable and washable Oeko-Tex certified fabrics. Good Housekeeping Parenting Award Winner. Meets security standard FMVSS 213. 2-year warranty.
About this item Recommended for babies from 7 to 25lbs. Hands Free: The baby carrier allows you to move around freely while keeping your little one close. A versatile way to carry baby and explore with baby, both comfortably and ergonomically Ergonomic: The well-padded head support helps keep baby head in an upright position. An extra butt support cushion offers your baby the all-day comfort Back Relief: Extra widened Padded shoulder straps, and extra widened supportive waist belt will greatly reduce stress toward your back Customized Fit: Both shoulder straps, and waist belt are adjustable to fit a wide range of body types Comfy & Supportive: The infant carrier is made of premium fabric, to keep you and your baby comfy in all seasons while ensuring a close fit and supportive feeling Certified Safe: All materials used are free from harmful chemicals and comply with CPC and CCPSA standards
Features may include: HIGH OUTPUT SERIES The Evinrude E-TEC H.O. series are performance engines to the max. Each engine is tuned for extra power and speed. If you like pushing limits in horsepower, speed and torque, then consider our High Output Series. AUTO-STORAGE The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a fourâ??stroke outboard. Extend the life of your outboard and your boating season
The 600i Jaw Crusher continues Tesabs focus on quality, durability, and productivity. With heavy duty cheekplate design, 40â?³ wide jaw and user-friendly control panel with excellent machine diagnostics, the Tesab 600i provides contractors with a highly portable option while meeting all production expectations. At 2.5 metres wide, its ideal for applications that require a high degree of mobility. CAPACITYENGINE 225 HP (167 KW) CAPACITYWEIGHT 34,600KG C/W MAGNET AND DIRT BELT CAPACITYCRUSHING CHAMBER 1016MM X 610MM CAPACITYPRODUCTION RATE* UP TO 225 TPH DOWNLOAD FULL TECH SPEC
Jacquard elastics, named after the pioneering French inventor Joseph Marie Jacquard, epitomize a fusion of functionality and style in the textile realm. Employing a specialized weaving technique, these elastics weave intricate patterns and designs directly into their material, offering a textured and decorative allure. From simple geometrics to elaborate motifs like florals and paisleys, the versatility of jacquard elastics knows few bounds. Widely embraced across the garment industry, they grace various apparel and accessories, including lingerie, waistbands, belts, and suspenders. Their customizable nature allows designers and manufacturers to tailor patterns to meet specific preferences, ensuring both aesthetic appeal and practicality in a diverse array of garments and accessories.
LUBENZ ONYX TRUNCK PISTON EO series is a range of high performance 30 TBN marine diesel engine oils formulated with premium quality base stocks and high performance additive detergent technology to ensure optimum performance and protection for trunk piston engines. They are designed to operate efficiently in severe residual-fuelled medium-speed diesel applications found in marine and stationary power industries. These TPEOs provide outstanding residual fuel compatibility and excellent engine cleanliness, especially in crankcase, camshaft areas, ring belt and piston under crowns operating under severe conditions. for more information, please contact us.
We have a special project to collect second hand clothing in japan where items are properly packed and shipped to us in the most hygienic and sealed so all products we received are 50% semi-used and 50% almost brand new. Our capacity is 50ton per month at price of 2.8usd/kg. i.e. in 1kg you can have 4 Tshirts or 6 shirts, etc. One container can have 26ton of clothing and for 1 full container order we also insert 20% bags, belts, watches..any brand will go.
Funcation: 1. Â High speed: It can cut 100~120 cut per minute. (50mm long) Â 2. Tolerance: +/- 0.5% of cutting length 3. Cutting type: Cutting is neat due to using a cold cutter which is durable. 4. Automatic operation: It works automatically only by setting length and quantity 5. Automatic stopper: It stops automatically if materials run out during operation 6. Memory: Set-length, set quantity & set speed will not be erased even if power off & on 7. Application: Belt loop, soft tube, string, plastic zipper, elastic band, small webbing, etc.
Machine Details:- Applied with the timing belt for connecting upper shaft and lower shaft, so even in high speed running, the machine is still running smoothly and noiselessly. Simply adjusted the adjusting rod could change the feeding volume of feed dog easily. The presser foot bar mechanism with special function of automatic lifting, so the machine is very suitable for curve picot-stitching. The uniform and beautiful picot stitch seams, ensured the high quality products. High efficiency and wide usability for blouse, shirt, dress, necktie, towel, handkerchief, tablecloth, sheet etc.
Machine Details:- Applied with the timing belt for connecting upper shaft and lower shaft, so even in high speed running, the machine is still running smoothly and noiselessly. Simply adjusted the adjusting rod could change the feeding volume of feed dog easily. The presser foot bar mechanism with special function of automatic lifting, so the machine is very suitable for curve picot-stitching. The uniform and beautiful picot stitch seams, ensured the high quality products. High efficiency and wide usability for blouse, shirt, dress, necktie, towel, handkerchief, tablecloth, sheet etc.
