Key Specifications / Features Name: India Red Granite Supplier Size: 600 X 300mm, 300 X 300mm, 600 X 600mm, etc. Finish: polished, honed, etc. Thickness: 15mm, 18mm, 20mm Thickness tolerance: +-1mm Polishing degree: above 90 degrees Application: wall or floor decoration Package: fumigated wooden crates normally Further understanding is the first step to cooperation,please visit our website at http://www.hangmaostone.com to abtain more information. Others sizes and application Available size 1)slabs: 2600up X 1600up X 20/30mm 2)Small slabs (strips): 600/700/800/900mm X 1800up X 20/30mm, etc. 3)Cut-to-size: 300 X 300mm, 600 X 600mm, 300 X 600mm, 300 X 900mm, 1200 X 600mm, etc. 4) Step: 100-150 X 30-35 X 2/3cm 5) Riser: 100-150 X 15-20 X 2cm 6)Tile: 12 Inch X 12 Inch X 3/8 Inch, 18 Inch X 18 Inch X 1/2 Inch or other sizes Packing Seaworthy wooden packages with IPPC stamp Big slabs 20mm: 10-12 pcs (about 50-60 m2) per bundle 30mm: 7-8 pcs (about 35-40 m2) per bundle Loading quantity in one 20ft container (27 tons) 1)20mm big slabs: 430-450 m2 2)30mm big slabs: 270-300 m2 3)cut-to-size: 450-500 m2 in 20mm, 300-330 m2 in
Key Specifications / Features Product name: Kashmir White Granite Model number: HMI-G001 Size: 600 X 300mm, 300 X 300mm, 600 X 600mm, etc. Finish: polished, honed, etc. Thickness: 15mm, 18mm, 20mm Thickness tolerance: +-1mm Polishing degree: above 90 degrees Application: wall or floor decoration Package: fumigated wooden crates normally Further understanding is the first step to cooperation,please visit our website at http://www.hangmaostone.com to abtain more information. Others sizes and application Available size 1)Slabs: 2600up X 1600up X 20/30mm 2)Small slabs (strips): 600/700/800/900mm X 1800up X 20/30mm, etc. 3)Cut-to-size: 300 X 300mm, 600 X 600mm, 300 X 600mm, 300 X 900mm, 1200 X 600mm, etc. 4) Step: 100-150 X 30-35 X 2/3cm 5) Riser: 100-150 X 15-20 X 2cm 6)Tile:12 Inch X 12 Inch X 3/8 Inch,18 Inch X 18 Inch X 1/2 Inch or other sizes Packing Seaworthy wooden packages with IPPC stamp Big slabs 20mm: 10-12 pcs (about 50-60 m2) per bundle 30mm: 7-8 pcs (about 35-40 m2) per bundle Loading quantity in one 20ft container (27 tons) 1) 20mm big slabs: 430-450 m2 2)30mm big slabs: 270-300 m2 3)cut-to-size: 450-500 m2 in 20mm, 300-330 m2 in
Key Specifications / Features Product name: Travertine Marble Item number: HMI-MT003 Size: 600x300mm, 300x300mm, 600x600mm, etc. Finish: polished, honed, tumbled, etc. Thickness: 15mm, 18mm, 20mm Thickness tolerance: +-1mm Polishing degree: above 90 degree Application: wall or floor decoration Package: fumigated wooden crates normally Further understanding is the first step to cooperation,please visit our website at http://www.hangmaostone.com to abtain more information. Others sizes and application Available size 1)slabs: 2600up X 1600up X 20/30mm 2)Small slabs (strips): 600/700/800/900mm X 1800up X 20/30mm, etc. 3)Cut-to-size: 300 X 300mm, 600 X 600mm, 300 X 600mm, 300 X 900mm, 1200 X 600mm, etc. 4) Step: 100-150 X 30-35 X 2/3cm 5) Riser: 100-150 X 15-20 X 2cm 6)Tile: 12 Inch X 12 Inch X 3/8 Inch, 18 Inch X 18 Inch X 1/2 Inch or other sizes Packing Seaworthy wooden packages with IPPC stamp Big slabs 20mm: 10-12 pcs (about 50-60 m2) per bundle 30mm: 7-8 pcs (about 35-40 m2) per bundle Loading quantity in one 20ft container (27 tons) 1)20mm big slabs: 430-450 m2 2)30mm big slabs: 270-300 m2 3)cut-to-size: 450-500 m2 in 20mm, 300-330 m2 in
Specification Details: 1) 1541 Chemical Component Analysis(%): C: 0.36-0.44; Mn: 1.35-1.65; P: < 0.040; S: < 0.050; 2) Monthly Capacity: 6000 tons. 3) Delivery Condition: BKS condition, Annealed(A), Bright Annealing, Normalized(N), Stress Relief Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 4) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end 5) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 6) Relevant Test: ASTM A519-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test, magnetic particle testing; 7) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 8) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 9) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc; 10) Applications: Automobile and Bearing Industry, Drill or oil industry, Mechanical and Structral Purpose, Hydraulic and Petrochemical Purpose, etc.
Product Description Product Name Smart led bathroom mirror Light Color White light color&warm light color&double light color Mirror Material 5mm silver mirror with waterproof LED light strips,with optional functional switch Size 600 800, 700 900, 750 1000, 750 1200, 800 1300, 900 1500mm (or customized size) Application hotel bathroom decoration; washing/toliet; house, hotel, school, hospital , apartment, etc. Lens Environmental protection mirror safety and explosion-proof treatment. Defog PET degogging film, power 160-180w, natural aging 20 years Light color 6000-6500 white, 3000-3200 warm white Switch type Touch Sensor Button Installation methods Wall mounted and embeded Voltage AC110-240,50 60Hz Warranty 3 years guarantee after delivery Packing details Coner protection PE foam protection 5 layers corrugated carton honey comb carton Advantages 1. Steel mirror safety explosion-proof 2. Copper-free high definition environmental mirror 3. Intelligent touch, one touch defogging with time display, bluetooth speaker 4. Special anti-corrosion mirror treatment 5. Low energy consumption, long life 6. Damage consumption 7. Fast delivery time 8. Accept customized services, any shape you want can have
Quick DetailsPlace of Origin:Zhejiang,China (Mainland)Brand Name:OEMModel Number:PT-10HType:High Pressure GunApplication:Paint Spray GunCup Volume:10L/Qt, 2.65 Gal.Max working pressure:43.5 psi (3 bar)Air hose connection:1/4" NPTLiquid hose connection:3/8" NPTPaint tank/pot:10L/Qt manual/hand mixing air pressure quality paint/pot tank PT-10HPackaging & DeliveryPackaging Details:Sea worthy cartonDelivery Time: Shipped in 7 days after paymentProduct DescriptionProduct ApplicationBig capacity tank perfect for big area spraying such as wall, floor, assembly line, garages, body shop, ship yard etc.10L/Qt, 2.65 Gal. manual/hand stir HVLP air pressure quality paint pot PT-10HMax Operating Pressure43.5 psi (3 bar)Paint Capacity10 Liter/Qt,2.65 Gal.Air hose connection1/4"Liquid hose connection3/8"Stir typemanual/handInner tankS.S inner tankMain Features1)� Complete with paint tank(10 lier)/qt,2.65 Gal., manual stirring pole, paint exit tube, air pressure gauge, air regulator, safety valve, pressure release valve, fluid outlet valve(2pcs), air inelt&outlet, S.S inner tank air hose, paint hose(avaiable with longer ones) and 4 castors.2) Actuated by manual/hand3) One -piece format seamless steel body4) S.S inner is easy to replace the paint5) Large lid clasp&gasket makes good sealing and stability during operating6) Air safety valve and pressure regulator. for safety7) Mounted on castors for easy manoeuvrability8) Carry hook, paint strirrer and assembly spanner includedDetailed ImagesOur ServicePacking & Delivery
Colorful Multifunctional Auto Sanitizing Dispenser For School Hygiene Automatic Hand Sanitizer Dispenser System has filed a patented invention named Modular Designed Sanitizer Dispenser, which equipped with exchangeable drop, spray & foam nozzle. To save time and labor cost, all parts including the digital controlling box, refill (nozzle and container), backboard and plate could be easily replaced without any tools. We are concentrated on hand hygiene, the multi-functional dispensers for drop / spray / foam 3 in 1 new system can meet different requirement in cleaning market. Hands-free system stops the spread of germs. Product Details: Model no.: DT 1200 Material: ABS Plastic Capacity: 1200 ml Function(optional): Drop, Spray & Foam Sensor distance: 6-12 cm Droplet(adjustable): 1.5 ml / 2.0 ml / 2.5 ml/ 3.5ml (Gel) Unit size: 13.5 * 12.5 * 31.0 cm Unit weight: 0.75 kg Power: 6 pcs â??Câ?? batteries or AC 110 v ~ 220 v Battery life: At least 100,000 Dispensing Cycles(DC) Features: 1. Smart intelligent electronics skill being adopted ensure sits high performance. No contact, to effectively prevent cross-infection of bacteria, prevent human damage & waste. 2. Because of advanced pump fit to all kinds of liquid can be applicable, like shampoo, liquid soap, sanitizer, etc. 3. Power consumption is very low, battery life reaches more than 100,000 cycles. 4. Flashing LED indicates low battery. 5. There is a device for protect from stealing off. 6. Primary application: school, commercial center, health care, institutions, hospitals, office, hotel, food factory & etc. Additional information: Capacity: 1200 ML Color: Blue, Green, Red, Customized Dispenser: Alcohol Spray Dispenser, Disinfectant Dispenser, Gel Dispenser,Lotion Dispenser Dispenser Type: Touch-Free Dispenser Installation Type: Wall Mount Dispenser Main Material: Plastic
Analogical 5 Step Wall Mount Dental Microscope - Inclinable Binocular Tubes Technical Specifications: Binoculars:- Binocular Tubes : 0 To 180 Deg. Inclinable Binoculars Magnification System:- Magnifications : 5 Step [ 4x, 6x, 10x, 16x & 25x ] Eye Pieces Eye Pieces : 10x W.f. Magnification Ranges:- Objective Lens : F=200mm Field Of View : 50mm Ipd Adjustment : 55mm To 75mm Focusing:- Fine Focusing : Manual Fine Focusing By Knob Video Imaging With Dslr Camera Optical Head Having Beam Splitter With Dslr Adapter, Which Can Be Use With Canon Dslr Camera, For Photo & Video Recording. Illumination:- Illumination : 15v/150w Twin Halogen Lamps With 100% Coaxial Through The Lenses Focused Fiber Optics Light Guide 1.5 Meter, Bright Light More Than 80,000 Lux, Maximum At Standard Condition Field Of Illumination : 70mm Microscope Arm : Arm : Counter Balanced Pantographic Arm With 320 Degree Rotation. Vertical Range Of Counter Balanced Arm : 250mm To 300mm Stand Type:- Floor Stand : Mobile Floor Stand On Caster Wheels For Easy Handling And Absolute Stability. Base : 600mm X 500mm (Approx) Height : 1500mm (Approx.) Weight : 65kg (Approx.) Power Voltage :- Power : Ac 220v, 50/60hz. (110v On Request) Accessories Included :- 1. Beam Splitter With Dslr Adapter 2. Dslr Camera (Canon) 3. Led Monitor Terms & Conditions:- 1) Listed Price Is Inclusive Of Shipping Cost. 2) Item Shall Be Dispatched After The Receipt Of Full Payment. 3) Parcel Shall Be Dispatched Through Dhl Courier. Delivery Time Will Be 7 To 10 Days Approx After Dispatch. 5) Import Duty & Taxes At The Destination (If Any), Shall Be Paid By The Buyer. Therefore Kindly Check The Rates Of Custom Duties At Your End. *if You Are A Company, Please Check All The Required Documents For Import With You. For Brazil Buyer We Need Their Cpf Numbers To Be Mentioned In The Invoice. Address Confirmation: Buyers Are Requested To Confirm Their Correct & Complete Shipping Address With The Working Telephone Numbers, For The Sharp Delivery The Parcel On Time.
Fog Formula 2 PCS fog formula in one container Fog Container Quantity 2 PCS fog container,1 time ejection Refill Easily replaced and refilled Fog Made Formula Solid food-grade Protection Area 80m3 closed area Fog Generator Cold smoke technology Time of Duration 30-45 minutes Startup Mode Support button switch,Remote controller,Remote monitoring center Power Source DC12V,3A Startup Time 1 second Full of Fog Time 5 seconds Power consumption 18w Dimensions 168*101mm Color Silver,grey,black Weight 1.7kg Casing Aluminium Working Temperature -10°C~50°C Operating Humidity -10%~85% Installation Bracket Wall Mounting Why Choose Us: Global-First solid dry fog with food-grade,cold smoke technology,environmently friendly,no any harmless to humans and animal;it will not affect clothing,furnishings and electrical equipment surrounding. Fog formula container easing replaced and refilled. Non-corrosive,non-residue,and biodegradable,ultra-low power consumption. Protects property at least 45 minutes after intrusion. Support multiple startup modes,seamless integration with existing electronic alarm systems. Easy to install,maintenance free. Passed the toxicology test of the PLA(People's Liberation Army) institute of disease prevention and control,and passed the product quality test of the ministry of public security safety. Aplication: 2PCS fog container,1 time use,which can fill 80m3 area in 5-8 seconds. 1 second spray dense fog. 3 seconds protect key area. 5-8 seconds completely filled with 80m3. Our security fog system are installed for customers as network alarm operation business:jewelry stores,luxury stores,chain stores,supermarket,server rooms,bank,ATM's. It will reduce on-site visibility to zero and actively prevent burglary/robbery in seconds in case of emergency.
Fog Formula 2 PCS fog formula in one container Fog Container Quantity 2 PCS fog container,1 time ejection Refill Easily replaced and refilled Fog Made Formula Solid food-grade Protection Area 80m3 closed area Fog Generator Cold smoke technology Time of Duration 30-45 minutes Startup Mode Support button switch,Remote controller,Remote monitoring center Power Source DC12V,3A Startup Time 1 second Full of Fog Time 5 seconds Power consumption 18w Dimensions 168*101mm Color Silver,grey,black Weight 1.7kg Casing Aluminium Working Temperature -10°C~50°C Operating Humidity -10%~85% Installation Bracket Wall Mounting Why Choose Us: Global-First solid dry fog with food-grade,cold smoke technology,environmently friendly,no any harmless to humans and animal;it will not affect clothing,furnishings and electrical equipment surrounding. Fog formula container easing replaced and refilled. Non-corrosive,non-residue,and biodegradable,ultra-low power consumption. Protects property at least 45 minutes after intrusion. Support multiple startup modes,seamless integration with existing electronic alarm systems. Easy to install,maintenance free. Passed the toxicology test of the PLA(People's Liberation Army) institute of disease prevention and control,and passed the product quality test of the ministry of public security safety. Aplication: 2PCS fog container,1 time use,which can fill 80m3 area in 5-8 seconds. 1 second spray dense fog. 3 seconds protect key area. 5-8 seconds completely filled with 80m3. Our security fog system are installed for customers as network alarm operation business:jewelry stores,luxury stores,chain stores,supermarket,server rooms,bank,ATM's. It will reduce on-site visibility to zero and actively prevent burglary/robbery in seconds in case of emergency.
Product introduction for busbar powered motorized transfer trolley The kinds of motorized transfer trolley is powered by busbar. The sliding line is usually installed between two rails or one side. The slider takes AC 380V from the sliding line to provide the motor through the electric control cabinet system. , to achieve the motorized transfer trolley to forward, back, start, stop and other operations. The power supply mode is as follows: a trench is opened on the side of the rail, a safety wire is installed in the trench, and a cover plate is laid on the trench. When the motorized transfer trolley is in operation, the cover is lifted by a flap device mounted on the flat cart, and the slider power is used to supply power to the motorized transfer trolley, and the motorized transfer trolley is automatically returned to the ground through the rear cover plate. Performance characteristics for busbar powered motorized transfer trolley The installation method of the trolley rails in this series is not fixed, and can be installed in the track or on one side of the trench or on the nearest wall according to the site layout. Suitable for medium and long distance, frequent start and stop, work environment with high work intensity. Usage and maintenance for busbar powered motorized transfer trolley During the use of the sliding wire, it should be taken to keep it free from foreign matter in the sliding wire. If there is any foreign matter, it should be cleaned in time to avoid poor contact and affect the use of the motorized transfer trolley. If you find that the cable insulation is damaged during use, replace the cable with new one.
Drywall anchor screws is one piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads.It is available in both engineered nylon and zamac alloy for use with either a No.6 or No.8 screws in 3/8" to 1" wallboard.The drywall anchor screws is formed from engineered nylon for use with No.6 screw in 3/8"to 5/8" wallboard.Application:1�First,we neeed to use electric drill to drill specific size of the hole2�Second,putting zinc-alloy speed anchors in the hole.3�Finally,using a screw driver to tighten screw into the expansion tube unitil the specified location.Features: 1. Ideal for mounting electrical fixtures ,fastening drapery supports,installing phone systems,miscellaneous hardware,etc2. Packaged and offered with and without screw. Installation: 1. Insert wither No.2 or No.3 Phillips driver bit into the recess of the zamac alloy anchor head.Use a manual screwdriver or a low rpm battery powered electric screw gun.2. Push the anchor into the surface of the wallboard until the two cutting bladed penetrate the surface.Using gentle forward pressure,rotate the anchor until the collar sets flush to the sueface of the wall.3. Put the fixture in place,insert the screw and tighten until it feels secure.As the screw is threaded into the nylon versions,the point will expand resulting in increased load capacity in thicker wallboard.Note: When use a n electric screw gun for application,set clutch and use slow speed(do not exceed approximately 300-400rpm)
DescriptionHONGJI is a high-tech company that specializes in the design, , manufacturing and marketing of a series of energy management, lighting controls and wiring devices. The dimmers we offer cover 120V LED Dimmers, 0-10V LED Dimmers and 12/24V LED Dimmers.For DMD series, we offer 4 models for your choice. Below table shows the specific description.Model No.DMD-LED1-2DMD-LED3-2DMD-LED1-3DMD-LED3-3PictureWiring typeSingle PoleThree WaySingle PoleThree WayCertificateETL/CETLUL/CULSensitivity DialYESControl typeANALOG CIRCUITFeatures120V, 60HzControl 700W incandescentControl 150W Dimmable LED/CFLWith sensitivity dial adjustment to make dimmer work with most loads without blink.Tough impact-resistant thermoplastic housingSmooth-action slide control for easy precise operation7. Longer mounting strap increases wall board contact area, eliminating floating installationsApplication -Bedroom -Bathroom -Living Room -Home office -Kitchen -CorridorCerificate FAQQ1. Can I have a sample order for dimmer?A: Yes, sample for testing is acceptable.Q2. What about the lead time?A:Sample needs 3-5 days, mass production time needs 4-7 weeks .Q3. Do you have any MOQ limit for dimmer order?A: Low MOQ, 1pc for sample checking is available.Q4. How do you ship the goods and how long does it take to arrive?A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 5 days to arrive. Airline and sea shipping also optional.Q5. Is it OK to print my logo on dimmer?A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Polar-Chiller is one of the earliest manufacturers in China who make equipments for Sauna sector, such as Water Chiller, heat pump unit, cold & hot water unit, (ice house) condensing unit, constant temperature dehumidifier etc., remain with the industrial chiller series and industrial dehumidifier series. Since 1980s, Polar has supplied huge quantity of cool-hot, dehumidifying-constant temperature equipments for Sauna Sports Sector and Entertainment Sector. Swimming Pool Constant Temp Dehumidifier â?¢ Suitable to dehumidify the indoor air and make pool waterâ??s temperature to be constant, such as indoor swimming pool. â?¢ Warmth and wet air pass filter to evaporator, the temperature dropped to the dew point, the steam condensed into water drops flowing into the pool, that the air pass the condenser, air temperature rise become dryã?? â?¢ Before delivering from manufacturer. Machine can be used after connecting to pipes and power. â?¢ Thereâ??s air dehumidify and constant temperature; air dehumidify & water constant temperature; air dehumidify & water constant temperature & air conditioner model, and ceiling or packaged or split or wall mounted type. â?¢ Dehumidify capacityï¼?6-100L/h â?¢ Heating capacityï¼?5200-99800Kcal/h (6 â??116Kw). â?¢ Refrigerated capacity: 4800-96000Kcal/h (5.5â??110 Kw) â?¢ Air flowï¼?1500m3/h - 22500 m3/h (25 â??375 m3/ min) â?¢ Working tempï¼?5â??-40â?? â?¢ Powerï¼?1.5Kw-40Kw
Functions & Features: 1) Convertible base, Independent alarm / Invisible wire / central control types for your options. 2) LED on base red / blue / green color for your options. 3) Independent alarm stand DA1880B is compatible with ES58 series sensors; Non alarm stand DP1180 (Invisible wire type) is compatible with ES508C / ES532 sensors (can work together with PB9378 recoilers); Non alarm stand DA1880 can work with central control alarm units, or work with ES545B4V super sensor (with independent alarm function). 4) Provide charging output plug with. Max charging current 2A. 5) Independent alarm stand DA1880B has many alarm functions. Alarm can be triggered when: DA1880B stand is tampered / sensor is disconnected / charging cable is cut or taken out. 6) Stand color: white / black / silver / gold. 7) Mounting to table top / wall surface by 3M adhesive tape. 8) Suitable for merchandise displays of mobile phone or small-sized electronic products. Main Parameters: 1) Stand size: 6.2Cm diameter. Average height (intermediate value) 5.3Cm. 2) Main material: ABS. 3) Alarm volume for DA1880B alarm stand: â?¥100DB. 4) Max output charging current: 2A. 5) Battery standby time (for the rechargeable lithium battery inside DA1880B): 7 days (if no external power supply) 6) Code modification function: yes. 7) Low battery indication: yes. 8) External power on / off indication: yes. 9) Display angel: fixed. 10) Power input via: USB plug, 1 meter cable Optional Accessories for DA1880B: * Power adapter: 5V/A2-USB / 5V/2AX6USB power adapter * Charging cable types: Micro USB, Apple, Type-C * DP1151 / DP1161 apple clamp (clamp for mobile phone / tablet) * AS3X series IR remote keys
Functions & Features: 1) Convertible base, Independent alarm / Invisible wire / central control types for your options. 2) LED on base â?? red / blue / green color for your options. 3) Independent alarm stand DA1880B is compatible with ES58 series sensors; Non alarm stand DP1180 (Invisible wire type) is compatible with ES508C / ES532 sensors (can work together with PB9378 recoilers); Non alarm stand DA1880 can work with central control alarm units, or work with ES545B4V super sensor (with independent alarm function). 4) Provide charging output plug with. Max charging current 2A. 5) Independent alarm stand DA1880B has many alarm functions. Alarm can be triggered when: DA1880B stand is tampered / sensor is disconnected / charging cable is cut or taken out. 6) Stand color: white / black / silver / gold. 7) Mounting to table top / wall surface by 3M adhesive tape. 8) Suitable for merchandise displays of mobile phone or small-sized electronic products. Main Parameters: 1) Stand size: 6.2Cm diameter. Average height (intermediate value) 5.3Cm. 2) Main material: ABS. 3) Alarm volume for DA1880B alarm stand: â?¥100DB. 4) Max output charging current: 2A. 5) Battery standby time (for the rechargeable lithium battery inside DA1880B): 7 days (if no external power supply) 6) Code modification function: yes. 7) Low battery indication: yes. 8) External power on / off indication: yes. 9) Display angel: fixed. 10) Power input via: USB plug, 1 meter cable Optional Accessories for DA1880B: * Power adapter: 5V/A2-USB / 5V/2AX6USB power adapter * Charging cable types: Micro USB, Apple, Type-C * DP1151 / DP1161 apple clamp (clamp for mobile phone / tablet) * AS3X series IR remote keys
Description Adopt Excellent PS engineering plastic with a certain quantity of anti-aging agent under injection process; ensure a strong anti-aging function with longer lifespan. Special design in window door connection part offers a better sealing when close up. Protection net connection change from button type to bolts & nuts type, which effectively avoid the damage in transportation. Reset Spring and Pulley support are all made of excellent stainless steel, Lifespan is extended. Added with special designed pull rod pulley which reduce friction and facilitate installation mostly by holding up pull rod or steel rope. Light trap can be offered in clients requests. Bolts connection gets the easy installation, save cost. Air guide plate can be offered in clients requests. Added spring enables air guide plate to adjust it�??s angle according to the window door op ening angle. Features 1. Dimensions: 600*325*160mm,600*300*160mm,645*310*160mm,690*300*160mm 2. Made from superior engineering plastic, air inlet anti-UV, anti-aging, and long lasting. 3. The use of a reasonably designed protective net helps prevent birds and insects. 4. With a 20 mm polystyrene insulation board filled inside, the air inlet effectively prevents heat dissipation in winter. 5. The patented pull is easy to open and close because rolling friction cusses low friction. 6. The reset spring made of quality stainless steel is durable and rust resistant. 7. During operation, please keep the pressure at the set value of the negative pressure gauge. 8. The air inlet features three opening angles for more reasonable ventilation. 9. Generally, air inlet close to exhaust fan are of small opening angle and those relatively far from the fan are of large opening angle, so as to achieve uniform ventilation. 10. WZH air inlets is convenient to install, which can be installed in a window area directly Installation notification: The installation wall must be in a same line; 15cm scope from the air inlet must be solid wall to enable catch expansion bolts(Hollow wall is prohibited); In avoid the rain flow backward, The Hole bottom inner side must be higher than outer side; Reserved wooden-frame must be in a same line with installation wall. Reserved Hole Dimension: 560mm X270mm Air Inelt Advantages: 1. Made of plastic injection molding, high strength, high toughness. 2. With UV resistant additive, air inelt has stronger anit-ageing ability, longer service life, better sealing, flexible opening, with anti-bird net. 3. Double springs ensure excellent sealing. 4. Can be controlled by manual winch or automatic winch.
Products Description The electric material transfer trailer is mounted on steel rail for shuttling along a fixed path. The capacity load of the electric material transfer trailer can up to 500 tons. The standard electric material transfer trailer is powered by battery. Standard electric material transfer trailer come in lengths of 4, 6 or 8 FT and widths of 4 or 6 FT. The electric material transfer trailers' capacities and sizes are available for specific applications. The electric material transfer trailers can be designed to be semi-manual or fully-automated depending on the requirements of the application. The electric material transfer trailer can also be part of automated crane systems, serving to shuttle goods, material, or product to and from manufacturing processes or storage locations. Working Principle The electric material transfer trailer is battery powered. The battery is installed in the trailer. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the electric material transfer trailer to start, stop, go forward, backward, adjust the speed and so on. Options The hydraulic lifting device can be equipped as per your requirement. As per the transported cargoes, the V frame, U frame, rubber pad, wooden pad, weighing device...can be equipped. As per the working environment, the anti-high temperature, anti-explosion, anti-rust, anti-skid measure can be adopted properly. Warning alarm. Stainless steel decking. Custom paint color. Rail guides. End stops. Each of our design can meet your specific application. Applications Material or stock shuttle Assembly transfer Tank transfer
Winch drive shaft accessories ZJ32L6 output shaft assembly BA70011-05.02.00 Drill pipe hanger accessories ZQ203-100 spline shaft 0102-13M GT350E Chassis * Rear Steelplate third piece KIT, SEAL, ARM CYLINDER, TM-80 S10232 GT350E Clutch*Clutchrelease bearing PLUG CAVITY 93667-M13 Drill pipe power tong accessories ZQ203-100/125 retaining ring 0102-15M FZ35*35RS gateAssembly 244.5mm FZ897.21.09.00 CUSHION, REMOTE PANEL GLQ28-00-04 FOR BOP CU MODEL: FKQ1200-8 7 1/2" â?? 8 5/8" safety clamp type C with repair kit includes ( 1 set dies, springs, 2 handle, suitable number from link pin, 1 adjustment ) Hydraulic tank accessories F-1600 Bonnet sealing ring AH36001-05.13 SCREW MOUNTING. Catalog number: 0101-26MB. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100. VOLVOFM12 chassis*Rear fender connection plate Liquid end accessories GJC70-30â?¡ OFM600S Plunger Cloth Packing 4 1/2" VALVE,CHECK,.75NPT 82777+30 BEARING, SELF LUB, 1.00 ID X .75 LG 118844-16-12 BEI Incremental Optical Encoder HS35F-100-R2-SS-1024-ABZC-5V/V-SM18-EX 01075-111 O-RING 51300-385-F Garlock Seal 21096-3646 Drill pipe hanger accessories ZQ203-100 Washer RS04 35�?35 BOP accessoriesFZ35-35 gate assembly 7" JK212-40S-5-1 Drill pipe clamp accessories ZQ203-125 Rib 01.02-38MA Power selection box accessories SJX5227TSN pressure sensor T75401030810 Packing Electric control box FKQ6406Repair kit QYB48-90L Brake device accessories ZJ30C gear pump CBG2080-143S Pin Dowell 51208-14 50012-28-C5D SCREW, CAP HEX HEAD DRILLED Screw:Cap-Hex Hd Drilled F/ Tds 11S 50006-12-C5D Manifolds and accessories JR GJC45-21â?¡ pressure sensor C03000580 PISTON RING 30173156 Pole hanging clamp accessories ZQ203-100 connecting sleeve 010810-03M 35*35 BOP accessoriesFZ35-70C shear ram assembly AC contactor MCC cabinet LC1-D5011 Q5C, 380V wire package Coring tool accessories Chuan 6-4 bit loader Elevator Drill Collar Elevator CDDD 107.95*104.78mm 1500KN Retrofit Kit: Junction Box Mtg 16712321-001 Drill pipe hanger accessories ZQ203-125 full set of seals FUSE DC BUS SEMICONDUCT E15676 Remote Console Accessory FKQ640-6 pressure transmitter YPQ-25 35�?35 BOP accessoriesFZ35*35SK piston DFZ5414-14 50007-14-C5D SCREW, CAP-HEX HD Logging tool accessories horizontal well tool TQ-400 lower joint SJ400-GW-04-09 Coring tool accessories Chuan 6-4 ball fetcher Valve:Reief Pressure F/Tds-9S 94520-1NN ACCUMULATOR, 4''DIA 110563-1 FW-0750-A Detroit Diesel PartsElectrical instrumentation system * low temperature water pressure sensor X00E50205 YSK1500-2 AC cooling fan blower BLADDER, RESERVOIR (5 GALLONS) 110191-501 SCREW. Catalog number: 01.131-02B. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100. Reducer: O-Ring Boss 56556-4-6-S Valve: Ball, Hi Pressure, 2-Pos. 3 Way 30172989-8
J10900A-20 COUPLER,M,17K PSI,1/4 FNPT Motor-vibrator CDX18-8300 explosion-proof harting D-SUB909672094704 QC010010 Piston sleeve Compensator cylinder RS11306.05.28.001/RS-F1600 Cushion pad AH0000060106 Edge seal Eaton 236WCB2 000402Ã??0005 O-ring 568-125 FLO 75DR V14215781 230-3633 axle cooling filter Flange 107.36.110.02 Bearing 2097722 spare parts for XJ-450 unit 114869-SL-RED Connector Power Single Pin 646/777 MCM Connecting manifold 4A101356 SPM QWS-2500SD pump hydraulic part of mud pump TDS-8SA SLIPPER RING 30182002-20/20508-206 Packer 1993750301 (installed in diverter DIV37 1/2-500 overshot packer, Pos.6) HOSE ASSEMBLY HYDRAULIC LINK TLT 59046P17N026 ZJ-50/315 DB17 intermediate rod sealing ring GH 3161-04.06. Repair KIT 852XGAKP-F6XS Parker Chelsea Totalizer FM2000G1M1-F Multifunctional time relay ETD-SL-1T-DTF 2866161 Dual Retaining Valve IA 514 870902-00-0514 for Air system of Carrier X D-60ZJ-20 51106 GB/T301-95 Jiangsu Rushi bearing Sealing ring for support ring 9303.15.00 Floating block HH8S38WV Air bag AK45350100 Cylinder 130 HH11309.05.020.153 Haihua F1300/1600 Valve Guide 2815780703079 BG322004-0221-Right bearing chock Hydraulic Motor For Boom Winch H1C M 108 ME SA0 BOLT IB BRG COVER 601407505 3861-1 Parasitic gear group 56.550.00A Encoder Digital For Tds 11Sh P/N: 10515072-001 MFG:NOV Pin 30173958 NOV TDS-10SH top drive Link adapter stopper STEM SEAL ASSEMBLY HNBR J023231008 INTERNAL THREAD BALL VALVE: 1 -11 1/2NPSCQ11F-16 PRESSURE GAUGE 5000PSI 41/2 NPT BOT 4285591 Oil pump RGF1000-06.12.00 Circuit Breaker T4L 250 TMA 80-800 FFCL 3P 1SDA054228R1 ABB Repair kit for compressor TU-FL01 to XJ-450 V-belt CUMMINS3290062 2 FULL PORT DM GATE VALVE ASS.7500PSI J0251423772140 Comprehensive cable TLSYWV-75-5+10*0.75P XF40-Di Explosion Protected Dual Imaging Fixed Camera Station 57412440 Air filter Camera Station EX270 Movable finger 1178.001.012-50 EMERGENCY CALIPER PSZ75A-2-00 Sealing ring HG4-332-66 01.02-09 730082 SWITCH,3 POS,MAINTAINED,SHORT HDL Pad bronze hydraulic key Q1212AZ-54 XYQ Z-36 to XJ-450 Piston lever H7UB.170P Oil filter CAT 1R1808 Gear-wheel 01.02-11M ZQ203-100 Damper assembly 29544144 ENCODER DIGITAL LOW TEMP 30122725-HE SPROCKET Z=23 P=50.8 AF50001-01.04.03 Valve seat Valve complete with seat seat and spring Pump F1300 O-ring 9090100700 for Diverter DIV37-1/2-500 Contact block MCB-01 of front-mounted 1NC ABB 1SFA611610R1010 Tandem drive axle rear assembly C226DA Meritor GH3101-05.30.00Shim set Sleeve for hydraulic key ZQ 203/100 ZQ203-028 Insert NPT1 1/2-1 1N-16-24 348-3432 Cabin air filter 810569 SADDLE,HOSES,SERVICE LOOP Union Welded fig 1502 2 Sealing ring 379328 DB hanging pliers Q3-1/2-17/90