Ladies Round neck fashionable pullover. Fabric : Crab Min Order 600 Pcs Color : Max 4
QUALITY :400 TS OF FABRIC COLOR : ALL TYPE SIZE : CUSTOMABLE SIZE SETS: 1 BEDSHEET ,2 PILLOW COVER
Fabric: Pure yak down size: 200cmX150cm MOQ: 200 pcs per item and color. Catalogue: available.
Smooth silk saree. Fabric is banarasi silk.Saree color is red and pallu is green. Saree is lightweight.
Polysattan Fabric With stretchable sizes 24-34 in 6 colors Black, Blue, Aqua, Green, Light Brown
our products according to buyer requirement in all kind of fabrics like as 100% ployster cotton
100% Cotton 180gsm Women's V-Neck soft cotton fabric Statement shirts with different variant colors
100% Cotton 180gsm Mens Crew neck soft fabric shirts Plain and cozy statement shirts
Varieties: 100% Silk, Cotton, Sustainable Fabrics & Linen Weight: 90gsm, 110gsm, 120gsm Size: Queen, Kind, Super King, Custom Custom Color, Print and Embroidery available
Includes: Flat sheet, Fitted Sheet, Pillow cases, Duvet Cover Varieties: 100% Silk, Cotton, Sustainable Fabrics Size: Queen, Kind, Super King, Custom Custom Color, Print and Embroidery available
Varieties: 100% Silk, Cotton, Linen Weight: 90gsm, 110gsm, 120gsm Size: Queen, Kind, Super King, Custom Custom Color, Print and Embroidery available
Varieties: 100% Silk, Cotton, Sustainable Fabrics & Linen Weight: 90gsm, 110gsm, 120gsm Size: Industry standard Custom Color, Print and Embroidery available
Varieties: 100% Silk, Cotton, Sustainable Fabrics & Linen Weight: 90gsm, 110gsm, 120gsm Size: 12"x12", 16"x16", 24"x24", Custom Custom Color, Print and Embroidery available
Varieties: 100% Silk & Sustainable Fabrics Weight: 50gsm-130gsm Size: 36"x36", 42"x42", 52"x52", 24"x75", 12"x75", Custom Custom Color, Print and Embroidery available
Varieties: 100% Silk, Cotton, Sustainable Fabrics, Linen Type: Dresses, Blouses, Trousers Weight: 90gsm, 110gsm, 120gsm Size: XS, S, M, L, XL Custom Color, Print & Embroidery available
Varieties: 100% Silk Weight: 50gsm-130gsm Size: Custom Various Color and Print available
RE-BAR Couplers (100% Make in India Product) are a mechanical splicing system for the connection of Reinforcement Bars from12 mm to 50 mm Diameter. Classification of our RE-BAR Couplers: o Provides Continuity of TMT Bars. o Allows full ductile elongation of TMT Bars. o NO Reduction of TMT Bar Cross sectional area. o Full Tension Splicing. Bar Break under tensile load. o Trustworthy alternative to lap splicing. o Solves bar congestion problems. o Reduces steels wastages. o Shortens Construction cycle time. o Easy Installation. o 100% traceability of materials origin & production lots. o Each joint with JB RE-BAR coupler is stronger by125% & above of TMT Bars. These are 100% indigenous products manufactured in compliance with BIS-16172: 2014: IS1608, IS 1786; IS 456-2000, ACI-318, BS-8110-1, ASTM A-1034/A1034M, which meets the international Standards.
Epoxy/Zinc Coated Rebar is provided in any concrete subjected in Coastal area (salt exposer area) to resist from corrosion and increase the service life of a structure. These are used in Marine Structure, Water Treatment Plant/s, Bridges, Piers and Industrial foundation etc. Epoxy/Zinc Coated reinforcement steel bars are used for corrosion protection. It is highly effective corrosion protection system for Reinforcement. Epoxy treated rebars has been used in numerous other industries, including the general construction of buildings, piers, marine, industrial foundations, highway barriers, bridges, coastal sea walls, and Salt Exposed area where concrete is used.
The Self Drilling Hollow Bar Anchor System is comprised of a hollow threaded bar with an attached drill bit that can perform drilling, anchoring and grouting in a single operation. The hollow bar allows air and water to freely pass through the bar during drilling to remove debris and then allow grout to be injected immediately after drilling is completed. Grout fills the hollow bar and completely covers the entire bolt. Couplers can be used to join hollow bars and extend the bolt length while nuts and plates are used to provide the required tension. We offer SDA in variants of R25, R32, R38, R51 and T76 and their accessories including the Anchor Nut, Anchor Plate, Anchor Coupler and Drilling bits depending on the geological condition of the project site (Type EX, EXX, ES, ESS, EY, EYY).
Soil Nailing-is a technique that can be used either on natural or excavated slopes, where the slope is reinforced by the insertion of tendons. The nails address the slope stability, which are connected in turn to a fencing system and provides surficial stability. We offer different types of anchor bars for use in conjunction for rockfall protection and natural hazard mitigation. These are used for numerous applications. Our anchor bars are available in different diameters of 25mm, 32mm, 36mm, 40mm, steel strengths and corrosion protection. We Make accessories like Joint Couplers, Anchor Plates and Anchor Bolts, also they are available as per project requirements and ground conditions. Components a Soil Nail includes-Steel Reinforcing Bars, Centralizers, Nail Head, Hex Nut Washers and Bearing Plates. Double Corrosion Protection (DCP) Anchors are grouted corrugated sheathing with controlled crack width and are for permanent use. Mostly used in high rise construction for heavy reinforcement. These anchors are unique as they can provide active restraint to structures. And they can avoid movements by applying a compressive load to a structure. The application of ground anchors is increasing as they enable construction in densely populated areas. This increase is due to the reductions in available space for traditional construction methods. In areas of limited easement, removable anchors can be used. For projects where further underground construction, like adjacent developments or tunnels, is anticipated, engineers can use cuttable anchors produced from composite materials. Features: Temporary or permanent options; Bond length and free length to enable prestressing; Capacities-bars 4,500kN, strand 15,900kN (+); Bar anchors with diameter range 25-75mm - strand anchors up to 63mm (+); Full compatibility with Infrastructure Intelligence, utilizing multiple sensor types.