Power supply is generated by hydropower, wave power / wave energy, coal fired, nuclear, wind power and also solar from sunlight The safest means is by solar power followed by wind power as they are environment friendly. Solar power is the conversion of energy from sunlight into electricity either directly using photovoltatics, indirectly using concentrated solar power which uses lenses or mirrors with tracking systems to focus on a large area of sunlight into a small beam. Made from efficient solar cells and conforming to international standards, performance and reliability are not compromised. Advantages of using solar system are: Solar power is a renewable resource Non-polluting Energy and heat from the sun is free Solar cells require little maintenance No moving parts to be replaced or maintained Replacement after 20 years Very versatile used in cars, water heaters, buildings, satellite, aviation, street lighting, remote telecommunications systems, highway emergency phones
Battery Capacity: 600Wh (12v, 50Ah) Battery Type: Polymer lithium battery Inverter: Pure sine wave Output Voltage: 110v-240v adjustable Load Power: 400w for AC appliances; and 100w for DC appliances Weight:9.3kg Dimension:38.5*28*15 cm Input Modes: Solar, AC, car charger Output Modes: 240vAC, 12V DC, 5V USB MAIN FETURES: 1. Portable design: new design, Small size, light weight, comfortable handheld carrying outdoors easily. 2. Green energy: where there is sunlight, there is electricity. By using a solar panel, you can get the power on the go. 3. Multifunctional purpose: refuel from utility grid, car socket and sunlight. Available for home appliances less than 400w/500w,and electronic devices less than 100w. 4. Silent and energy saving: no gas and no harmful fumes , without noise, provides clean, quiet power for outdoor activities and homes. 5. Polymer lithium storage battery: long life, large capacity, low consumption. Safe and reliable power to human life. 1 piece per carton, packing size: 48*28*38 cm. G.W.: 13kg Standard export carton package for the solar generator
A solar power plant is based on the conversion of sunlight into electricity, either directly using photovoltaics (PV), or indirectly using concentrated solar power (CSP). Concentrated solar power systems use lenses, mirrors, and tracking systems to focus a large area of sunlight into a small beam.
PV Power generation systems also known as Solar PV Electricity (SPE) generating systems are emerging renewable energy technologies and can be developed as viable option for electricity generation in future. Solar energy technology is technically proven and draws on an inexhaustible primary energy resource. Carbon emissions and greenhouse gas impacts are not there. Solar PV technology collects and converts solar radiation directly into electricity. Solar PV generation systems collect solar energy as light to convert into DC electricity generating plant. This generated DC Power Is converted into conventional AC power and can be fed into the grid at appropriate Grid Voltage.
FEATURES â?¢� � � � � � � Automatic parallel configuration Black start Wide range of inverter capability, from 80 - 750V Embedded high accurate SoC / SoH algorithm Wide range compatible with main -stream inverters, various protocols embedded Quick stackable plug-in design Outdoor & Indoor (IP55) Battery Module Quantity 2 4 6 Total Capacity 50 Ah Nominal Voltage Size 204.8V 409.6V 614.4 V Size 560*400*735mm 560*400*1199 mm 560*400*1663 mm Total Energy 10.2 kWh 20.4 kWh 30.7 kWh Rated Charge / Discharge Current 30 A.0.6c Weight 148.1 kg 266.8 kg 385.2 kg Design Cycle Life 6000, 0.5C at 25â??C, 80% DOD, 80% SOH Operating Temperature Charging Temperature : -5�°C 55 % Discharge Temperature : -15 % 55�°C Storage Temperature -15 % -55â??C Self-Discharge Rate of Module <2% per month, at 27 % Max. Parallel Capacity 307 kWh Ingress Protection IPSS, in stacked up state Certificates & Standards IEC 62619 / EN 61000-6-3/ UN38.3/ RoHS, REACH
Aluminum Solar Systems Aluminum extrusion for solar panel Material Grade: Alloy 6000 Series 6063/6061/6005 Temper: T5â??T6 Technology: Aluminum Extrusion Surface treatment: Mill finish, anodizing, powder coated, sandblasting, electrophoresis etc Color: Silvery white, black, golden, champagne, dark bronze or according to your requirement Normal Anodizing thickness 8-12 micro Normal Power Coating thickness 60-100 micro Shape: Square, Round, Flat, or according to customers' drawings Length: The Standard length of export is 5.8m , Anodizing 6.5 meters at most, Mill finish 13 meters at most Deep processing cutting, drilling, punching, bending etc 2D&3D Design 1: 4 Designers in design and development department 2: Auto CAD, 3D, AI, SLD, PRT. IGS, PDF, JPEG etc. Engineering& Tooling 1: 8 Engineers in Mold Shop. 2: Use high tonnage extruder, Wire EDM, CNC, Drilling machines etc. Quality Control 1.ISO Approved. 2.Inspection at Site. 3.Inspection Before Shipping. 4.Testing Machine. Packing details: 1.EP Paper inside for each profile separate then craft paper outside 2.EP Paper inside for each profile separate then carton paper then pallet 3. Shrink film 4.wooden carton Delivery: 15-25days after receiving down payment -
Item NO : BSK-100P Maximum Power(Wp): 100W Maximum Power Voltage(V): 17.635V Maximum Power Current(A): 5.672A Open Circuit Voltage(V): 21.88V Short Circuit Current(A): 6.22A Size of Module(mm): 1154mm X 676mm X 35mm Size of Glass(mm): 1148mm X 670mm X 3.2mm Size of solar cells(mm): 156mm X 120mm Number of cells(Pcs): 36pcs Maximum System Voltage(V): 1000V/600V Temperature Coefficients of Isc(%): 0.06 %/ Temperature Coefficients of Voc(%): 0.397%/ Temperature Coefficients of Pm(%): 0.549%/ Nominal operating cell temperature: 44.42 Temperature Range: 40- +90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 11.0kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. Carton with pallet together.
Item no : BSK-120P Maximum Power(Wp): 120W Maximum Power Voltage(V): 17.4V Maximum Power Current(A): 6.89A Open Circuit Voltage(V): 21.75V Short Circuit Current(A): 7.63A Size of Module(mm): 1482mm X 676mm X 34mm Size of Glass(mm): 1476mm X 670mm X 3.2mm Size of solar cells(mm): 156mm X 156mm Number of cells(Pcs): 36pcs Maximum System Voltage(V): 1000V/600V Temperature Coefficients of Isc(%): 0.065 %/ Temperature Coefficients of Voc(%): 0.346%/ Temperature Coefficients of Pm(%): 0.488%/ Nominal operating cell temperature: 45.32 Temperature Range: 40- +90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 12.5kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. carton and pallet together.
Item NO : BSK-80W Maximum Power(Wp): 80W Maximum Power Voltage(V): 17.5V Maximum Power Current(A): 4.57A Open Circuit Voltage(V): 21.6V Short Circuit Current(A): 4.81A Size of Module(mm): 1196mm X 556mm X 35mm Size of Glass(mm): 1190mm X 550mm X 3.2mm Size of solar cells(mm): 125mm X 125mm Number of cells(Pcs): 36pcs Maximum System Voltage(V): 1000V Temperature Coefficients of Isc(%): 0.06 %/ Temperature Coefficients of Voc(%): 0.397%/ Temperature Coefficients of Pm(%): 0.549%/ Nominal operating cell temperature: 44.42 Temperature Range: 40- +90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 8.5kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. 10pcs per carton and with pallet finally.
Item no : BSK-150W Maximum Power(Wp): 150W Maximum Power Voltage(V): 34.2V Maximum Power Current(A): 4.36A Open Circuit Voltage(V): 43.4V Short Circuit Current(A): 4.94A Size of Module(mm): 1580mm X 808mm X 35mm Size of Glass(mm): 1574mm X 802mm X 3.2mm Size of solar cells(mm): 125mm X 125mm Number of cells(Pcs): 72pcs Maximum System Voltage(V): 1000V/600V Temperature Coefficients of Isc(%): 0.06%/ Temperature Coefficients of Voc(%): 0.397%/ Temperature Coefficients of Pm(%): 0.549%/ Nominal operating cell temperature: 45.32 Temperature Range: 40- +90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 15.0kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. Packing: 728pcs/40¡± container , 14 pallets total per container 52pcs solar module per pallet Packing size per pallet :1.65x1.12x1.85m.
Item NO : BSK-50W Maximum Power(Wp): 50W Maximum Power Voltage(V): 17.5V Maximum Power Current(A): 2.86A Open Circuit Voltage(V): 21.6V Short Circuit Current(A): 3.5A Size of Module(mm): 826mm X 556mm X 35mm Size of Module(mm): 820mm X 550mm X 3.2mm Size of solar cells(mm): 125mm X 83mm Number of cells(Pcs): 36pcs Maximum System Voltage(V): 1000V Temperature Coefficients of Isc(%): 0.058 %/ Temperature Coefficients of Voc(%): 0.367%/ Temperature Coefficients of Pm(%): 0.485%/ Nominal operating cell temperature: 44.42 Temperature Range: 40 + 90 Surface Maximum Load Capacity: 200kgs/m2 Allowable Hail Load: 25mm@80km/h Weight Per Piece (kg): 6.0kgs Frame(Material,Corners,etc): Aluminum Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power. 10pcs per carton and with pallet together.
Solar Home Lighting System is a revolutionary product developed for use wherever the grid electricity is unavailable or unreliable. Using the highest quality and most efficient components, each Light provides exceptional brightness for at least 6--9 hours per day charged by sunlight. This device is pretty much easy to install and is flexible enough to be installed and uninstall whenever needed. Portable because you can bring it anywhere, in case you transfer to another house, you can bring it with you. Using this in your homes could cut down your high--electricity bills because light bulbs are the number one in energy consumption. Features Low energy dissipation Low cost with high quality LED exceptional brightness AnyTime & AnyWhere Lighting Energy saving & Environment friendly Very easy to be installed & uninstalled Automatic overload & overcharge protection. Applications Home lighting Emergency lighting Desert area, grassland area Remote hilly and mountainous locations Village, country area and islands. Model: FH-SL-5 Specification: Solar Panel: 18V5W with 6m cable Dimension: 285mm*185mm*25mm Sealed lead Acid Battery: 12V4Ah LED lamp: 2pcs LED Lamp 12V3W with 5m cable Automatic overload protection & over charge protection. With USB Output to charge mobile phones,mp3,mp4 etc. with different connector trips. Charging time: About 9-10 hours to charge the battery fully Lighting time: About 6-7 hours after the battery is fully charged, about 3-4 hours after the battery is charged for one day.
Model: rnts032 Light intensity: 120 lumens per bulb Solar panel: 10w solar capacity, polycrystalline Light time: 20 hours led light from a full battery charge Features: hps Will power 3 bulbs for up to 20 hours Includes 1 usb mobile phone charging port Battery checker 10w solar panel Can be fully charged via the solar panel within 4 hours Can be placed on a or wall mounted Wired bulb High/low mode light function Built-in hook for hanging the bulb Unit size: hps 164x105x45mm Certification: lighting global an ce certification available
1) First-grade cells 2) high-efficiency and low-price products 3) 25 years output warranty 4) 10 years manufacturing warranty 5) stable production line 6) TUV, IEC, CE, ISO 1956*992*50mm 25.4kg
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
Model Number GY-CN150X AC Output Maximum Power 150W Output voltage AC 220V/230V Output Frequency 50Hz Conversion Efficiency 92% Output Socket 2pcs DC Output Maximum Power 120W USB Port DC5V2A 3USB 1TP-C DC Port DC12V
The solar racking system for curved tile roof provides the necessary structural support for the installation of solar panels. The hook is carefully designed to provide maximum flexibility when designing and planning tile roof solar system installations. Our tile roof installation components make installation easy and fast, thus saving labor costs and time. Using products can save time, save money and provide high-quality installation every time. The solar mounting system provides a cost-effective way of installation, which can be installed quickly and easily! All system components are made of high-grade anodized aluminum and stainless steel. Fasteners and pull ring nuts are configured to save additional parts purchase. All these advantages save you labor costs and time.
2500W solar power system pure sine wave inverter P section What is power inverter? A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC source. Features: 1. Pure sine wave output. 2. Rated power range from 300W to 4000W. 3. 100% real power. 4. Fully electric protection: Low voltage alarm & Shutdown, over voltage, earth fault,short circuit,overload,soft start, over temperature, polarity reverse. 5. Customize DC input voltage range. 6. Can match remote controller to control power-on/off, cable length for 5meters. 7. Supply OEM brand service 8. Pure sine wave output, over 90% transfer efficiency. 9. USB function 5V 2.1A. Specification details: MODEL PQ-2500P Output AC Voltage 100-120V/220-240V AC Rated Power 2500W Surge Power 5000W Waveform Pure Sine Wave USB port 5V 2.1A 5V 2.1A 5V 2.1A 5V 2.1A Input DC Voltage 12VDC 24VDC 12VDC 24VDC Voltage Range 10.5~15VDC 21~30VDC 10.5~15VDC 21~30VDC Efficiency(Typ.) >90% Remote Control Function(optional) Protection BAT.Low Alarm 10.5±0.5VDC 21±1.0VDC 10.5±0.5VDC 21±1.0VDC BAT.LOW Shutdown 10±0.5VDC 20±1.0VDC 10±0.5VDC 20±1.0VDC Over Load Shut down output voltage, restart to recover Over Voltage 15.5±0.5VDC 31±1.0VDC 15.5±0.5VDC 31±1.0VDC Over Temperature Shut down output voltage, recover automatically after temperature goes down Output Short Shut down output voltage, restart to recover DC Input Reverse Polarity By fuse Earth Fault Shut off o/p when the load has electrical leakage Soft Start Yes,3~5 Seconds Remote control(Optional) Remot controller with 5m cable Dimension 45*25.2*10.1cm(L*W*H) N.W(KG) 6.3kG G.W(KG) 7.3kG Warranty 2years
Products: 1. Solar Panel 2. Solar Equipments a. Water Heater b. Water Pump c. Power station d. Inverter e. Air Conditioner f. Lights Product Description : Based on Client Requirements, Price of product ( USD price or FOB price) : As per Product data, Product origin : India, Key Specifications/Special Features : Based on Client Data / Specifications Minimum Order Size and Packaging details : As per Client requirements and type of equipment
M-type Ground Solar Mounting System Brand: Amoy Delivery time: 10 days Pile Driven Ground Mounting is a economic and fast-way installation solutions.By using pile driving machine hydraulically push galvanized steel posts into the ground to the required depth without using poured concrete to support a steeI racking system ,it just takes some seconds to finish a piling pole.The racking is strong and cost-effective which adaptable to most terrains.