1. Sand blasting and rust removal for steel structure, hull and bridge; 2. Water knife cutting for metal, stone and glass; 3, chemical, petroleum, water treatment filter media; 4. Grinding of marble, optical lens, glassware, leather and other materials; 5. Raw materials of grinding wheel, whetstone, emery cloth and sandpaper; 6, highway pavement, runway, wear-resistant rubber, anti-skid paint and other wear-resistant materials; 7, widely used in the construction industry, high-grade real stone paint exterior decoration interior decoration temperament noble and elegant. Ideal new non - abrasion resistant aggregate.
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries.
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries.
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries. Details: 1.Place of original: HENANï¼?china 2.Material: Almanding garnet. 3.Real Density: 3.96-4.2g/m3 4.Bulk density: 1.96-2.15 g/m3 5.Melting point: 1300 6.Conductivity:
Garnet Sand , derived from mined Almandite and Andradite mineral deposits, is a semi-precious stone.Once extracted, it is processed and then screened to the desired grade. The combination of the high density and physical properties make Garnet nature's most highly efficient, effective and safe abrasive for both wet and dry blasting applications Pink Color 30-60 Mesh Alluvial Garnet Sand for Sandblasting Main Applications 1 Water filtration media 2 Sand blasting media 3 Water jet-cutting abrasive suggested materials: tile, Marble, granite, stone, stainless steel, steel plate. 4 Precise water jet-cutting, hole drilling, lapping 5 making coated or bonded abrasive tools
SEPPE Garnet is an integrated garnet mining, processing, shipping and distribution organisation providing the best quality industrial garnet for the surface preparation and waterjet cutting industries. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hardness/durability creates the optimum abrasive efficiency, lowest abrasive consumption (kg/m2) at the highest production rates (m2/hr). SEPPE garnet for waterjet cutting, they're extracted from almandine, since it is more angular in form, more efficient in cutting. Mixed with very high pressure water, garnet is used to cut steel andother materials in waterjets. SEPPE garnet for sandblasting, it is a alluvial garnet grains which arerounder, more suitable for blasting treatments.
Garnet sand, derived from the mined Almandite and Andradite deposits, is a semi-precious stone. Once extracted, it will be processed and then filtered to the desired level. The combination of high density and physical properties allows the company to be the most efficient, effective, and safe abrasive for both wet and dry blasting applications. Products used in 1. Free grinding, such as glass industry. 2. For friction products and wear-resistant ground 3. For resin or ceramic bonded abrasives, such as grinding wheels, cutting wheels. 4, refractory materials, wear-resistant fire products. Grinding and polishing, such as grinding stones, grinding blocks, flaps, etc. 6. Coated abrasives, such as sandpaper, emery cloth, sand belt, etc. Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Global Minechem Corporation offers natural abrasive sand in India. We provide fine, medium and coarse natural abrasive sand for a range of industrial application usages. We deliver reasonably charges Natural Abrasive which is environmentally and operator friendly. They are alternative to silica sands and minerals slags which offer a class Sa3 White Metal finish. Characteristics of Garnet / Natural Abrasive Sand Garnet particles are dense, stiff and sharp. They are free of heavy metals and toxic elements. The lower friability of abrasive enables recycling up to 5-8 times and the comparatively high density makes sure swift blasting speeds. Typical Physical Properties Available Sizes Natural Abrasive Sand 12 â?? 20 Mesh Natural Abrasive Sand 12 â?? 24 Mesh Natural Abrasive Sand 20 â?? 40 Mesh Natural Abrasive Sand 20 â?? 60 Mesh Natural Abrasive Sand 30 â?? 60 Mesh Natural Abrasive Sand 60 â?? 80 Mesh Natural Abrasive Sand 80 â?? 120 Mesh Key Usage of Garnet / Natural Abrasive Sand It is progressively superseding other blasting media as it is environment friendly and reusable. They are utilized in: Oil Petroleum industry maintenance, oil wells and refineries Ship building, ship yards and repair yards for blasting purpose New buildings, bridges and rail tanks Stone washing of denim fabrics without damages Industrial waste water treatment Water Jet Cutting Abrasive Papers For Powder coating
HOMEBASE HARD ROCK GARNET is a non-metallic naturally obtainable mineral abrasive which is also known as almandine garnet. It is the harviest and hardest of garnets. Thanks to its proper hardness,physical and chemical properties, HOMEBASE HARD ROCK GARNET is used widely for waterjet cutting, sandblasting and water filtration, offering high efficiency, low cost and clean environment.
1.Physical properties Mohs hardness: 7.5~7.9 Melting point: 1280c (2336f) Acid resistance: 99% Color: gray, black, pink Main contain: sio2: 38~40%; al2o3: 20~23%; fe2o3: 30~40%; cao: 5~10% Silica content:
CHEMICAL COMPOSITION Fe2O3: 25-31% Al2O3:17-21% MgO:5-6% SiO2:34-40% CaO:5.0-10.0% MnO:0-1.0% PHYSICAL PROPERTIES Specific Gravity:3.8-4.1g/cm3 Bulk Density:1.8-1.9 g/cm3 Hardness (Mohs):7.5-8.0 Melting point:1300 C Grain shape: Sharp, Angular Chloride content 25ppm Acid solubility(HCL) 1% Conductivity 25 ms/m Toxic substances:None
Chemical Composition - Typical SiO2 :34-40% Fe2O3:25-31% Al2O3 :17-21% MgO :5-6% MnO :1%max CaO :5-10% TiO2 :1%max Mineralogical Content - Typical Almandite garnet : 97-98 % Ilmenite :2.0%max Quartz (free silica) :1.0%max Others :0.5%max Physical Characteristics - Typical Specific Gravity :4.1 Mohs Hardness :7.5+ Acid Solubility (HCL) :1.0% max Bulk density :145 lb/ft3 Colour :Red-green Grain shape :Sub angular Toxic substances : none Available Sizes:10/20 20/40 30/60 40/60 60/90 90/120 120/180 180/220 24# 30# 36# 40# 46# 54# 60# 70# 80# 120# #180 #240 #280 #320 #400 #600 #800 #1000 #1200 #1500 #2000 #3000 W63 W40 W28 W20 W14 W10 W7 W5 Main Applications: Water treatment,blasting,waterjet cutting,lapping on TV on screem,semiconductor,special glass products etc
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries. www.scabrasive.cn
80 mesh red garnet sand in abrasive Garnet abrasive is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As Almandine garnet, it is the heaviest and hardest of garnets. Due to suitable hardness, physical and chemical properties, Garnet abrasive is used widely for water jet cutting, Sandblasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, Garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
Water jet cutting garnet sand 80 mesh is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As Almandine garnet, it is the heaviest and hardest of garnets. Due to suitable hardness, physical and chemical properties, Garnet abrasive is used widely for water jet cutting, Sandblasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, Garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries. Details: 1.Place of original: HENANï¼?china 2.Material: Almanding garnet. 3.Real Density: 3.96-4.2g/m3 4.Bulk density: 1.96-2.15 g/m3 5.Melting point: 1300 6.Conductivity:
Dear sir/madam We are a malaysia-based company known as dkst services, involve in the supply of sandblasting abrasive. Our main products are steel grit & shot and garnet abrasive. Our garnet abrasive are source from the southern region of india and also the central region of china. As for our steel grit & shot, we are collaborating with a factory in china to produce our own brand (oem) of steel grit & shot. The quality of our product is up to industry standard with an compatibility prices. We have been exporting the production to south east asia region, like vietnam, philippines, indonesia and seeking for more long term potential client. If you will be interested of importing garnet abrasive, steel shot and steel grit, kindly provide me your requirement and we can work something out from here. Please feel free to check with us if you require more information. Thanks As prefer by buyers
Garnet sand ZW Garnet Sand is natural almandite garnet ,due to its low dust,high hardness,,high bulk density,heavy specific weight,long working life,good shape edges and no free silica,it can be widely used in sand blasting, water jet cutting and water filtration. Physical Characteristics Hardness 7.5 - 8.0 Mohs Bulk density 2.34 g/cm3 Specific gravity 4.10 g/cm3 PH 7 Conductivity
filtration Usage and Garnet Material garnet sand 20-40 Garnet, the popular abrasives for waterjet cutting, blasting cleaning,water filtration, bonded abrasive, anti-slipping material, athletic field, polishing abrasive and other applications. Physical characteristics of Garnet Physical Items Grains Color Red Brown Toxicity None Melting Point 1300°C Solubility in Water Not Soluble in Water Specific Gravity 3.90-4.10 g/cm3 Conductivity Less Than 125us/cm Mohs Hardness 7.5 Average Chemical composition of Garnet SiO2 37.09% Al2O3 20.11% FeO 29.73% Fe2O3 1.83% TiO2 0.46% MgO 5.26% CaO 2.09% MnO 1.19% The usage: 1. Free grinding and polishing. 2. Resin abrasives. 3. Coated abrasives. 4. Sandblasting. 5. Waterjet cutting. 6. Water filtration. 7. Stone washing. 8. Surface preparation
Garnet Sand , derived from mined Almandite and Andradite mineral deposits, is a semi-precious stone.Once extracted, it is processed and then screened to the desired grade. The combination of the high density and physical properties make Garnet nature's most highly efficient, effective and safe abrasive for both wet and dry blasting applications Pink Color 30-60 Mesh Alluvial Garnet Sand for Sandblasting Main Applications 1 Water filtration media 2 Sand blasting media 3 Water jet-cutting abrasive suggested materials: tile, Marble, granite, stone, stainless steel, steel plate. 4 Precise water jet-cutting, hole drilling, lapping 5 making coated or bonded abrasive tools
