Mechanical seals and bearings & bushings, mechanical seals faces. seal ring & matting ring), fep o ring, wave spring and other seals, components, o ring seals, elastomeric bellow seals, metal bellow seals, wave spring seals, multi spring seals, double seals, ptfe teflon seals, cartridge seals, agitator mixer seals, dry gas seals and split seals.
1 single cartridge seal type :GSE-108CRTS single cartridge seal, SUITABLE For petroCHEMICAL , chemistry and paper making,medical industry.globe star mechanical seal manufacture . is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal. Globe products can replace the mechanical seals produced by John Crane and Burgmann and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry. OPERATING LIMITS Rotary Ring:SiC/Carbon/TC/stellite ;Stationary Ring:SiC/Ceramic/TC ;Secondary Seal:VITON/PTFE Coated VITON/PTFE /NBR/EPDM /calrez Other Parts :SsS304/SsS316/Hastelloy-c 2 GROUNDFOS TYPE CARTRIDGE SEAL type :GSE-108CRTGF Grundfos pump seals are defined as an typical O-ring seal of the cartridge type.Different models of mechanical seal for a wide variety of Grundfos pumps,among them:CRN,NB,NK,CLM,LP,TP,CRR ETC. Available in diverse combinations of materias and different diameters:12,16,22,etc.Also mechanical seals for the waste water pumps.Available in various materials:silicon-graphite carbide,silicon carbide- silicon carbide,combined with EPDM AND FKM elastomers. 3 cartridge seal type :GSE-108CRTBL For petroleum, chemistry and paper making single cartridge seal OPERATING LIMITS Temperature: -40℃~+204℃ Pressure: ≤5.17MPa Speed: ≤23m/s Rotary Ring:SiC/Carbon/TC ●Stationary Ring:SiC/Carbon/TC ●Secondary Seal:VITON/PTFE Coated VITON/PTFE ●Other Parts :SSS304/SSS316/Titanium/Hastelloy-C 4 dual cartridge seal type :GSE-108CRTD DOUBLE cartridge seal, For petroleum, chemistry and paper making,medical industry.globe star mechanical seal manufacture . is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal. Globe products can replace the mechanical seals produced by John Crane and Burgmann and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry. OPERATING LIMITS Temperature: -20℃~+280℃ Pressure: >1.6MPa Rotary Ring:SiC/Carbon/TC/stellite ●Stationary Ring:SiC/Ceramic/TC ●Secondary Seal:VITON/PTFE Coated VITON/PTFE /NBR/EPDM /calrez ●Other Parts :SsS304/SsS316/Hastelloy-c 5 METAL BELLOW Cartridge Seal type :GSE-108CRTM high temperature, non-pusher rotating welded metal bellows single seal with the flexible element cartridge design. A rugged API 682 mechanical seal for handling high pressures and high temperatures environments, which also has the flexibility to be fitted in an ANSI+ and DIN standards. Pressure: 0~2.5Mpa Temp.: -30ºC~300ºC Speed: ≤25 m/s 6 heavy duty cartridge seal type :GSE-108CRTHY Mechanical Seal type cartridge for high pressures heavy duty in petrochemical industry and sealing of wide range of products such as crude, gasoline, LPG, water with muds. Designed according norm API682 Materials Seal Body : SS 316 .SS304,MS Outboard Faces : Metallized Carbon, Silicon Carbide (RB),TC,CERAMIC Inboard Faces : Silicon Carbide (RB), Tungsten Carbide (Ni), Metallized Carbon Elastomers : Viton, EPR, Chemraz, Kalrez,.TTV Springs : Hastealloy C, AISI 316 As per customer requirement we would able to provide packaging details.
Brass road , brass angale cock, brass pindal, brass chand , brass 1014 1/2" bsp elbow, brass 16mm knurling bush, brass 25mm knurling bush, brass leg, brass 1/2" hex nut, brass 3/4 female, brass 9 gram female, brass 16 gram female, brass 1" male/female, brass double stud, brass single stud, brass kangi, brass 2025 equal t, brass 1620 split ring, brass midium ring.
Sihanming FAKRA connector is one of the auto parts. They are widely used in GPS, Remote control, car phone, car TV, hi-fi equipment, antennas, etc. It is mate with the same colors or connector and socket, and the structure is to be double-locked and fool-proofing for them FAKRA Straight Female Connector Major characteristics: � � Double-locked, fool-proofing assembly with the color and the structure The connector is be protected by the cap . Easy to assembly Many difference between the connector and the cap. The product technical characteristics: Body: Brass, Ni-plated Socket: beryllium-copper, Gold-plated Pin contact: Brass Insulator: PTFE Fakra Female Crimp Solder Connector wholesale Crimp ferrule: brass, Ni-plated O-ring: beryllium-copper Shell: PA66+30%GF Technical characteristics
1. DOUBLE ACTING PISTON SEALS Double-acting piston seals have a symmetrical profile cross section & identical sealing functions in both directions. 2.SINGLE ACTING PISTON SEALS A single-acting piston seal is designed for cylinders where pressure is applied from one side only. 3.ROD SEALS Rod seals maintain sealing contact in sliding motion between the cylinder head and the piston rod. 4.OIL SEALS Rotary seals are use in rotating equipment like gear box, pumps, motors etc to retaining lubrication in bearings. 5.FABRIC SEALS Fabric seals are flexible rotary seals mfg in cotton fabric reinforced body having spring loaded rubber sealing lip 6. METALLIC OIL SEALS High pressure rotary seals are capable to withstand under high pressure application such as hydraulic pumps or motors, power steering application etc. 7. V SEALS V-Rings are use as an dust seal or a guard in avoid ingression of the water or colant in the bearing chock. 8. U CUP SEAL U-cup seals, as their name implies, have a U-shaped profile, including an outside static sealing lip and an inside dynamic sealing lip. 9. PNEUMATIC ROD SEALS Pneumatic seals operate in dynamic applications, often at high speeds, generally with rotary or reciprocating motions. 10. PNEUMATIC SYMMETRICAL SEALS where cylinders and valves are actuated by air pneumatic seals plays a vital role.
MFG-CW-302 Colors: all color avilable Sizes: All Size Available Customize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
MFG-CW-303 Colors: all color avilable Sizes: All Size Available tomize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
MFG-CW-304 Colors: all color avilable Sizes: All Size Available Customize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
MFG-CW-305 Colors: all color avilable Sizes: All Size Available Customize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
MFG-CW-306 Colors: all color avilable Sizes: All Size Available Customize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
MFG-CW-307 Colors: all color avilable Sizes: All Size Available Customize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
MFG-CW-308 Colors: all color avilable Sizes: All Size Available Customize hoodies 100% combed, ring-spun cotton jersey. Cotton fleece Pullover/Zipper Double lined hood Modern Classic Fit Contrast inner lining to hood Deep front pouch pocket Contrast drawstring and toggles Ribbed cuffs and waistband Reactive dyed for color stability Custom colors & sizes Custom Printing / Embroidery Logo offer Available in Custom Colors & sizes
LN81W / 82 series bellows single-seat control valve, based on LN81/82 series valve single-seat non pressure balance structure on the basis of increase the bellows seal structure, compression elastic stainless steel bellows in bearing parts connected to the valve stem in together, and packing of double seal, eliminate medium leakage hidden trouble. Suitable for differential pressure is highly toxic, flammable, explosive, volatile and the adjustment of the rare and precious metal medium. bellows single-seat control valve TECHNICAL PARAMETERS Nominal Size DN15 ~ DN300 Pressure Rating PN16/25/40/63/100;CL150(PN20)/300(PN50)/600(PN110) Operateing Temperature -46â??~ 350â?? Characteristics Equal percentage, linear, quickly open Rangeability 30:1ã??50:1ã?? 100:1 Seat Leakage Class ANSI B16.104: IVã??Vã??VI Body Material WCB/WCC/LCB/LCC;WC6/WC9;CF8/CF8M;4A/5A etc. Trim Material 630/316/316+ST/316nitriding/316+Ni60/316+WC etc. Seal Material PTFE+ graphite v-shaped packing, flexible graphite ring packing, graphite +PTFE braided packing etc. Single seated globe valve manufacturer:Zhejiang SUPCON Fluid Technology Co., Ltd.
FAKRA Connector is one of the auto parts. They are widely used in GPS, Remote control, car phone, car TV, hi-fi equipment, antennas, etc.FAKRA Straight Female Connector is mate with the same colors or connector and socket, and the structure is to be double-locked and fool-proofing for them. double locked Female Connector factory Major characteristics:   Double-locked, fool-proofing assembly with the color and the structure   The connector is be protected by the cap .   Easy to assembly   Many difference between the connector and the cap. The FAKRA right angle Female Connector technical characteristics:   Body: Brass, Ni-plated   Socket: beryllium-copper, Gold-plated   Pin contact: Brass   Insulator: PTFE   Crimp ferrule: brass, Ni-plated   O-ring: beryllium-copper   Shell: PA66+30%GF GPS FAKRA Connector Technical characteristics   Impedance: 50   Frequency Range: 4GHz   Withstanding Voltage: 1000V(RMS)   Contact resistance:   Center contact: 20m   Outer contact: 10m   Insulation: 1,000M   VSWR: DC - 2GHz
We can supply below products: a, WALFORM plus Cutting ring; b, WALFORM tube fitting; c, Cutting ring tube fittings; d, Cutting Ring Tube Coupling; e, Weldable Straight Stud Coupling; f, Weldable Straight Coupling; g, Reduce Coupling; h, Straight Coupling; i, Ajustable Gauge Coupling; j, Manometer Coupling with Seal Ring; k,Double Banjo Coulping with One-piece Bolt; l, Banjo Coulping with One-piece Bolt; m, Female Stud Coupling; n, Parallel Female Stud Coupling; o, Ajustable Male Stud Tee-Stud with Lock Nut; p, Ajustable Equal Tee with Lock Nut; q, Ajustable Elbow Couplings with Lock Nut; r, Ajustable Run Tee; s, Ajustable Stud Branch Tee; t, Ajustable Stud Elbow; u, Ajustable Equal Tee; v, Ajustable Equal Elbow; w, Female Reducer; x, Reducing Fitting; y, Reducing Tee; z, Straight Reducing Coupling; 1, Meeting the requirement of ISO8434, ISO9974, ISO1179, DIN3870, DIN3861 and other international standards; 2, Material: 304, 316L, 45#, etc; 3, Suitable for OD 6mm-42mm of carbon steel or stainless steel pipeline; 4, Working pressure: 10-63MPa; Products are tested strictly by qualified third-party lab, our company could offer complete set of Type Test Reports and Customized Solutions to meet the hoghest expectations of customers
Hitesh Metal is one of the well-known manufacturer & trader for high quality Steel Ball Valves , which is a split ring that is engineered and designed to give a pre - measured minimum gap for socket welds. This valve is used in combustible gas trains in many industrial applications. Stainless Steel Ball Valves offered by Hitesh Metal are used in hydraulic and pneumatic systems because the needle valve allows for precise flow regulation when there is low flow in a non - hazardous environment. These valves replace existing traditional techniques employed by pipeline engineers to generate a double block and bleed configuration in the pipeline. Carbon Steel Ball Valves is often used for critical process service, which are for high pressure systems or toxic / hazardous fluid processes. Applications that use valves include instrument drain, chemical injection connection, chemical seal isolation, and gauge isolation. Alloy Steel Ball Valves offered by Hitesh Metal do the work of three separate valves (two isolations and one drain) and require less space and have less weight. This design also has operational advantages, there are significantly fewer potential leak paths within the double block and bleed section of the pipeline. Because the Duplex Steel Ball Valves are full bore with an uninterrupted flow orifice they have got a negligible pressure drop across the unit. The pipelines where these valves are installed can also be pigged without any problems. Hitesh Metal also offer these Nickel Alloy Ball Valves in different sizes, shapes and designs as per customers specifications at affordable rates. Specifiaction of Stainless Steel, Nickel Alloy High Pressure Ball Valves High Pressure Ball Valve NO DESCRIPTION QTY MATERIAL 2 BODY 2 SS 316 2 END CONNECTOR 2 SS 316 3 BALL 2 SS 316 4 STEM 2 SS 316 5 BALL SEAT 2 PTFE 6 CONNECTOR SEAL 2 PTFE 7 STEM SEAL 2 PTFE 8 STEM WASHER 2 SS 316 9 LOCK PIN 2 SS 304 10 HANDLE 2 SS 304 11 SPRING WASHER 2 SS 304 12 LOCK NUT 2 SS 304 High Pressure Ball Valves Specifiactions: Type One Piece, Two Piece, Three Piece, 3 Way, 4 Way Size 6mm to 750mm Body Material CI, CS, SS, AS, A 105, CF3, CF3M, CN7M, WCB, CF8, CF8M, Alloy 20 End Connection Flanged End / Screwed End / Butt Weld End / Screwed to BSPT / NPT / Socket Weld / Buttweld with extended Nipple Pressure Rating ASA 150#, 300#, 600#, 800#, 900#, 1500#, 2500# Optional Trunnion Motorised Ball, Manual Gearbox or Motorised Operation Operation Lever, Gear, Electrical Actuator, Pneumatic Rotary Actuator Design & Mfg. Standard API-6D, BS-5351, BS-5159, ISO 17292 Seat & Seals PTFE, Reinforced PTFE, Buna-N, Graphoil, Graphite
GKV18C/16N/16H Series Control Valves characterized by short actuating times, optimized actuating forces, and reliable tight sealing. GKV18C/16N/16H control valves are also available with electric or electrohydraulic actuators. Multi-functional positioner: The GK2300 digital positioner is a multi-functional interface with integrated bus support for the controller or process control system. Installation and mechanical connection to the valve actuator are compliant with VDI/VDE 3847 guidelines for open, non-proprietary concepts. Reliable stem seals: From the stuffing box to the hermetically-sealed bellows, this stem seal can be tailored exactly to the process fluid, pressure, and temperature required. The design, stem surface, and packing material complement each other perfectly to avoid problems with friction, corrosion, and emissions. Robust, high-precision valve trims: These are specially designed for the prevailing flow conditions in your plant. The shapes of the throttle valves and valve seats and the material from which they are made are optimized to meet your requirements. Our valve seats integrate the unique quick-exchange system and can be replaced without special tools. The float-mounted clamping seat and the metal or soft seal for the valve seat ensure leak-tight, reliable sealing. We innovate, you benefit! Patented valve seat with PTFE soft seal and metal secondary seal - Absolute seat tightness - Defined preload - Long service life Symmetrical seat rings made from a wide variety of materials: - Reproducible seat tightness due to self-centering - Low wear and tear minimizes cost of spare parts PTFE V-ring packing with additional precision sealing element: - Safety and hermetic sealing - Low maintenance Double-life quick-exchange system for seat rings and plugs: - Maintenance without special tools Wide variety of valve trims optimised for all applications: - Maximum process flexibility with high control quality - Low noise emissions Valve plug and stem can be replaced separately: - Reduced storage - Cost-effective plug replacement Flow-optimised valve housing: - High flow coefficients, low noise emission Compact, robust design: - Minimum mounting space required, low weight
Njp Series Pharmaceutical Equipment/Machinery Automatic Capsule Filling Machine, Automatic Capsule Filler, Capsule Making Machine Product advantages: 1. Independently develop and improve the internal design of the die turntable, and use original Japanese linear bearings, which have higher accuracy and longer service life than counterpart equipment. 2. The design of the lower cam, compared with its counterparts, we have increased the pressure atomizing oil pump to maintain the lubrication in the cam groove, which greatly reduces wear and prolongs the service life of parts. 3. The upper and lower modules are designed for one-way movement, and the imported double-lip polyurethane sealing ring has better sealing performance. 4. The control panel is eye-catching and intuitive, and adopts stepless variable frequency speed regulation. 5. The three-dimensional adjustment mechanism based on the lower plane of the measuring plate is used to make the gap more uniform and the loading difference more accurate. 6. Equipped with safety protection devices for people and machines, with automatic shutdown device for lack of materials, to achieve more stable machine operation, safety and reliability. 7. The combination of air blowing and gas suction of the module has been added to ensure that the mold holes are clean and free of dust and improve the probability of operation. 8. Independent design of 2 sprockets drives 2 indexing boxes to separate labor. (Peer is generally a sprocket to drive 2 indexing boxes.) Reduces resistance, shares operating pressure, increases operating intensity, and the station's fault is basically zero.
Introduction: Included the following items 1, Helmet 2. Clothes 3. Trouses 4. Belt 5. Fire proof Boot 6. Gloves Description strengthed the shoulder, elbow, knee. Hem with large pockets, pocket bottom corners have a water drain hole. Reflecting sign belt, seam, sleeve seam, batwing joints in main stitch are double needle, and using the Fang anti- temperature line. Cuff trousers, leather bags, waterproof rib cuffs, and a thumb ring buckle design, rib cuff material for aromatic fiber. Elastic belt use strong elastic rubber band. Garment fit, with high protection grade, ightweight non-removable integrated fire protective clothing Specifications 1. EN469 SRO fire-proof fabrics fire suit/firefighter suit for fireman 2.Application: Used for protection for firemen Clothing Construction: Jacket Material: Composite cloth with fire resistant layer, waterproof and breathable layer, heat protective layer, comfortable layer Reflective band; American 3M company Color: Purplish blue Characteristics: 1. Fire Resistance Performance: Damaged Lengthâ?¤ 10cm Continued Burning Timeâ?¤ 2s 2. TPP(heat protective performance)â?¥ 28cal/cm2 3. Weightâ?¤ 3.5kg/set 4. Breathable capacity â?¥ 5000g/square meter 24h 5. Anti-static water-pressure â?¥ 17000PA Material: Out: SRO fire-proof fabrics XBD(210±10.5)g/m2 Moisture Barrier: Non-woven Aramid + PTFE(105±10)g/m2 Thermal Barrier: Retardant Insulation Blankets 716# (150±20)g/m2 Pillow top: Cotton Muslin (120±12)g/m2 32*32 75*75 Dupont Reflective Strip Standard: EN469 ZGZ-ZPJY-001:2009 & GA10-2002
FAKRA Connector is one of the auto parts. They are widely used in GPS, Remote control, car phone, car TV, hi-fi equipment, antennas, etc.FAKRA Straight Female Connector is mate with the same colors or connector and socket, and the structure is to be double-locked and fool-proofing for them. double locked Female Connector factory Major characteristics:   Double-locked, fool-proofing assembly with the color and the structure   The connector is be protected by the cap .   Easy to assembly   Many difference between the connector and the cap. The FAKRA right angle Female Connector technical characteristics:   Body: Brass, Ni-plated   Socket: beryllium-copper, Gold-plated   Pin contact: Brass   Insulator: PTFE   Crimp ferrule: brass, Ni-plated   O-ring: beryllium-copper   Shell: PA66+30%GF Eaton NPR48-ES Energy Saver Rectifier Module Power Module Features 3000W output power Energy saving efficiency greater than 96% Wide efficiency curve Industry leading power density Fast on-line expansion of rectifiers (hot-swap) Simple plug and go insert Unity power factor Digital signal processing for enhanced control Wide AC supply conditions Wide output voltage range Constant power output Compliance with international standards Description The Eaton NPR48-ES Energy Saver Rectifier is designed for communications network operators who are striving to cut energy costs across the network, and/or to meet aggressive carbon footprint reduction targets. Operating with well over 96% efficiency, it produces at least 50% less waste energy than most other modern rectifiers, and with potentially greater savings over older infrastructure. The NPR48-ES Energy Saver Rectifier harnesses the technology of the APR48-ES 2kW rectifier to offer a powerful 3kW of output power. This rectifier features intelligent digital signal processing for enhanced control, producing peak efficiency in excess of 96% for typical operating loads, while also maintaining a very high minimum operating efficiency of 95 to 96%, over a very wide range of loads. The high power density, short depth and flexible mounting options makes the Energy Saver Rectifier well suited to limited space applications such as ETSI and road side cabinets. The Energy Saver Rectifier is fully compatible with the existing Eaton SC200 system controller and it is one of the easiest rectifiers to use, with a simple plug-and-go insertion. It operates under a wide range of AC power conditions and in temperatures at up to 70C (158F). Specifications Input AC Supply 120V/208-240V, 50/60Hz (nominal) 185-275V full output power up to 50C [122F] 90-185V reduced output power Power Factor >0.99 (50 100% output current) Efficiency >96% peak >95% (20 100% output power) Output DC Output Voltage Range 43.2 57.5V DC Output (maximum) 3000W, 60Amp at 50V Environmental Operating Temperature Range -40C +70C [-40F +158F] Output power derates above 50C [122F] Cooling Temperature controlled, variable speed, high reliability fan