Piston For Jenbacher Jgs320 Gas Engine Suppliers and Manufacturers

Haynes 718 Alloy is a high-temperature, high-strength nickel-based alloy developed by Haynes International. It has excellent oxidation resistance, corrosion resistance, and high-temperature strength, and is widely used in high-temperature and high-pressure environments in aerospace, energy, chemical, petroleum, and natural gas industries. The chemical composition of Haynes 718 Alloy includes approximately 52% nickel, 19% chromium, 3% titanium, 5% aluminum, about 0.9% iron, and trace amounts of carbon, sulfur, phosphorus, copper, and tantalum. This combination of elements gives Haynes 718 Alloy its excellent high-temperature performance. In addition, Haynes 718 Alloy uses advanced heat treatment processes, which can further improve its high-temperature strength and oxidation resistance. Haynes 718 Alloy can be made into various shapes of products, such as sheets, rods, pipes, forgings, castings, and welding materials, etc. Its mechanical properties improve with increasing temperature, and it can maintain high strength and toughness at high temperatures ranging from 600�°C to 980�°C. In addition, Haynes 718 Alloy has excellent oxidation resistance and can withstand high-temperature oxidation environments for a long time. Haynes 718 alloy is an important nickel-based superalloy used in high-temperature applications such as gas turbine engines. Below are the standards for Haynes 718 alloy in various countries: United States: AMS 5596, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5665, AMS 5666, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5758, AMS 5759, AMS 5660, AMS 5661, AMS 5677, AMS 5909, AMS 5927, AMS 5947, AMS 5950, AMS 5963, AMS 5964, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B637, ASTM B670, UNS N07718 Europe: EN 2.4668 Germany: DIN 17744, VdT�?V 718 France: AFNOR NC 19 Fe Nb United Kingdom: BS HR 201, BS HR 401, BS HR 501 Japan: JIS NW 0771 We can provide the following the form:Haynes 718 Alloy coil; Haynes 718 Alloy strip;Haynes 718 Alloy plate; Haynes 718 Alloy sheets; Haynes 718 Alloy tube; Haynes 718 Alloy pipe;Haynes 718 Alloy flat; Haynes 718 Alloy bar BS:HR 201/JIS:NC19FeNb/UNS:N07718/W.Nr:2.4669 Haynes 718 is a nickel-chromium alloy that is known for its high strength and excellent corrosion resistance. It is commonly used in a wide range of applications, including: Aerospace industry: Haynes 718 is widely used in the aerospace industry due to its high strength, excellent fatigue resistance, and good weldability. It is used for components such as gas turbine engine parts, thrust reversers, and exhaust systems.

409 stainless steel is a ferritic stainless steel commonly used in machinery, construction and other engineering. Due to the existence of austenite grains, its mechanical properties are greatly improved. And due to the addition of a lot of alloying elements, the strength and hardness are also greatly improved. It has good mechanical properties and high temperature corrosion resistance. It contains 11% chromium, the minimum required to form a passive surface film that makes stainless steel corrosion resistant. It combines good high temperature corrosion resistance with moderate strength, good formability and overall cost. 409 stainless steel is a ferritic stainless steel that contains about 11% chromium. It is commonly used in applications where high-temperature corrosion resistance is required, such as automotive exhaust systems and heat exchangers. Some of the key properties of 409 stainless steel include: Corrosion resistance: 409 stainless steel has excellent corrosion resistance to exhaust gas and atmospheric corrosion. Heat resistance: 409 stainless steel exhibits good resistance to high-temperature oxidation and scaling. Weldability: It is easily weldable and can be welded using common welding techniques. Formability: 409 stainless steel can be easily formed into complex shapes using various forming techniques. Cost-effective: It is a low-cost stainless steel and provides excellent value for money in various applications. Overall, 409 stainless steel is a highly versatile and reliable material that provides excellent corrosion and heat resistance properties at a low cost, making it a popular choice in various industrial applications. Here are some of the most common international standards for 409L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A268/A268M: Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service ASTM A554: Standard Specification for Welded Stainless Steel Mechanical Tubing EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:409 stainless steel coil; 409 stainless stee strip;409 stainless stee plate; 409 stainless steel sheets; 409 stainless steel tubes; 409 stainless steel pipe; 409 stainless steel flat; 409 stainless steel bar 409 is most commonly used in truck exhaust systems, agricultural equipment, and heat and gas turbine exhaust silencers.

321 stainless steel is an austenitic stainless steel that contains titanium as a stabilizing element. This element helps to prevent chromium carbide precipitation, which can occur during high-temperature service, making it ideal for use in high-temperature applications. Some of the key properties of 321 stainless steel include: High-temperature resistance: 321 can withstand high temperatures up to 870�°C (1600�°F) without losing its strength or corrosion resistance properties, making it ideal for use in applications such as furnace parts and exhaust systems. Corrosion resistance: 321 offers excellent resistance to corrosion, including aqueous corrosion and stress corrosion cracking. Strength and toughness: 321 has good strength and toughness, making it suitable for use in demanding applications. Fabricability: 321 is easily formable using standard methods, and can be welded using common welding techniques. Some of the common applications for 321 stainless steel include: Exhaust systems in automobiles, aircraft, and industrial equipment High-temperature furnace parts, such as burners and heating elements Chemical processing equipment Jet engine parts Heat exchangers Overall, 321 stainless steel is a highly reliable and versatile material that is well-suited for use in high-temperature applications where superior corrosion resistance and strength are required. The following are some of the commonly used international standards for 321 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10095: Heat resisting steels and nickel alloys JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:321 stainless steel coil; 321 stainless stee strip;321 stainless stee plate; 321 stainless steel sheets; 321 stainless steel tubes; 321 stainless steel pipe; 321 stainless steel flat; 321 stainless steel bar Applied to open-air machines, heat-resistant parts of building materials and parts with difficulty in heat treatment in chemical, coal and petroleum industries that require high resistance to intergranular corrosion 1. Petroleum waste gas combustion pipeline 2. Engine exhaust pipe 3. Boiler shell, heat exchanger, heating furnace parts 4. Silencer parts for diesel engines 5. Boiler pressure vessel 6. Chemical transport vehicle 7. Expansion joints 8. Spiral welded pipes for furnace pipes and dryers

In the complex and demanding world of oil and gas exploration, drilling bentonite emerges as an indispensable ally. This natural clay, enriched with montmorillonite, offers unmatched properties that enhance drilling efficiency, ensure environmental safety, and reduce operation costs. Our premium drilling bentonite is engineered to meet the rigorous demands of the drilling industry, delivering performance that surpasses conventional drilling fluids. What is Drilling Bentonite? Drilling bentonite is a specialized form of bentonite clay that has been optimized for use in drilling operations. Sourced from high-quality deposits, our bentonite undergoes a meticulous process of extraction and refinement to ensure it delivers superior performance. Primarily composed of montmorillonite, our drilling bentonite features a unique combination of minerals that contribute to its exceptional swelling, sealing, and stabilizing properties. Chemical and Physical Properties The excellence of drilling bentonite lies in its chemical composition and physical attributes. With a formula of Al2H2Na2O13Si4, it showcases a robust structure ideal for drilling applications. It possesses a high swelling capacity which allows it to expand and form a gel-like consistency when mixed with water. This characteristic ensures the formation of a thick filter cake that effectively seals the boreholes, preventing fluid loss and stabilizing the wellbore. Superior Drilling Efficiency Our drilling bentonite enhances the efficiency of drilling operations by offering superior lubrication, exceptional fluid loss control, and effective cuttings removal. Its rheological properties ensure that the drilling fluid maintains a low viscosity at high flow rates, improving the removal of cuttings and reducing the risk of borehole instability. Furthermore, its high yield point increases the carrying capacity of the fluid, allowing for the suspension and transport of larger quantities of cuttings at lower pump pressures. Applications in Various Drilling Scenarios Our drilling bentonite is versatile and can be adapted to various drilling scenarios, including: Vertical Drilling: Enhances drilling speed and efficiency while maintaining borehole stability. Horizontal and Directional Drilling: Provides superior rheological properties that ensure the smooth steering of the drill bit through complex geological formations. High-Pressure High-Temperature (HPHT) Wells: Resists thermal degradation and maintains its sealing and lubricating properties under extreme conditions.

Incoloy 903 is a high-temperature alloy material, also known as Inconel 903, which is a kind of nickel-based alloy. It is mainly composed of nickel, chromium, iron, cobalt, copper, titanium, aluminum and other elements. It has good high temperature strength, creep resistance and corrosion resistance, and is widely used in aerospace, petrochemical, energy and other industries under high temperature and high pressure environments. and other fields. Following are some features and applications of Incoloy 903: characteristic High temperature strength: It has good strength and rigidity at high temperature, and can withstand stress and load under high temperature and high pressure environment; Creep resistance: It can be used for a long time without deformation under high temperature and high pressure environment; Corrosion resistance: good corrosion resistance in strong acid, strong alkali and other corrosive media; Machinability: Incoloy 903 can be machined, forged and welded through a variety of processing techniques. The international standards for Incoloy alloy 903 in various countries are as follows: United States: AMS 5800, AMS 5801, AMS 5802, AMS 5803, AMS 5826, ASTM B166, ASTM B408, UNS N19903 Germany: DIN 17742, DIN 17754, W.Nr. 2.4633 United Kingdom: BS HR 6, BS 3076 Europe: EN 10095 We can provide the following the form:Incoloy alloy903 coil; Incoloy alloy903 strip;Incoloy alloy903 plate; Incoloy alloy903 sheets; Incoloy alloy903 tube; Incoloy alloy903 pipe;Incoloy alloy903 flat; Incoloy alloy903 bar BS:HR 5/JIS:NW4893/UNS:N19903/W.Nr:2.4665 Incoloy 903 has a wide range of applications, mainly used in the following fields: Aerospace industry: components such as aero-engines, aero-bearings, gas turbines, etc.; Petrochemical industry: such as chemical reactors, high pressure vessels, steam generators and other equipment; Energy industry: such as nuclear reactor components, heat exchangers, coal-fired power plant boilers and other equipment; Other fields: such as the manufacture of high-temperature valves, heat treatment furnaces, medical equipment, etc.

Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions. Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering. The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur. In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures. Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength. Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required. The following are the execution standards of Incoloy alloy 890 in various countries: US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890 Europe: EN 10095 Germany: DIN 17742, DIN 17750, DIN 17754 UK: BS 3076 Japan: JIS G4902 China: GB/T 14992 We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539 Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators. Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves. High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines. Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.

Zeolite, the multifaceted mineral catalyst for sustainable innovation is a remarkable group of minerals with astounding versatility Zeolite has increasingly become a cornerstone in sustainable technology and environmental management. These micro porous aluminosilicates - comprised of aluminum, silicon, and oxygen, with their general chemical formula expressed as Mx/n[(AlO2)x(SiO2)y]zH2O, where 'M' represents the exchangeable cations like calcium, sodium, potassium, and magnesium- formed naturally and synthesized for tailored properties, exhibit unique characteristics that make them indispensable across numerous industries, from environmental cleanup to advanced manufacturing. Properties of Zeolite Zeolites are primarily made up of silicon, aluminum, and oxygen in a framework that includes size-selective pores and channels. These structural features are critical because they allow zeolites to act both as molecular sieves, trapping particles based on size exclusion, and as ion exchangers, selectively swapping cations such as calcium, potassium, and sodium. Zeolites are hydrophilic, meaning they can absorb water and other polar molecules. However, modifications during synthesis can adjust this property, allowing for hydrophobic zeolites that are selective for organic compounds, expanding their utility in non-aqueous environments. Versatile Applications: Environmental Remediation: Zeolites are extensively used in water treatment processes to remove pollutants like heavy metals, ammonia, and radioactive isotopes from contaminated waters. Their high ion-exchange capacity makes them excellent for use in both municipal and industrial wastewater treatment plants. Energy Efficiency: In the energy sector, zeolites are pivotal in refining petroleum products through fluid catalytic cracking, significantly enhancing yield and reducing byproducts. Additionally, zeolites are integral to the development of adsorption-based energy storage systems, which are crucial for renewable energy integration. Agricultural Enhancements: Zeolite's role in agriculture extends beyond soil amendment. It is used to stabilize nitrogen in urea-based fertilizers, reducing volatilization and thereby increasing nitrogen use efficiency. This contributes to lower emissions of nitrous oxide, a potent greenhouse gas. Healthcare Innovations: In healthcare, zeolites are being investigated for their potential in drug delivery systems, particularly for targeted cancer therapies. Their porous structure can be engineered to load and release therapeutic agents directly at tumor sites, minimizing systemic side effects.

Incoloy alloy 825 is a nickel-iron-chromium alloy with molybdenum, copper, and titanium added to enhance its corrosion resistance in highly oxidizing and reducing environments. It has excellent resistance to both reducing and oxidizing acids, stress-corrosion cracking, and pitting and crevice corrosion. It is also highly resistant to corrosion caused by chloride ions and sulfide stress cracking. The alloy has good mechanical properties and can be easily fabricated and welded. Incoloy alloy 825 is often used in chemical processing, pollution control equipment, oil and gas recovery, acid production, and nuclear fuel reprocessing industries. It is available in various forms such as pipes, tubes, plates, sheets, bars, wire, and forgings. The alloy can be further customized based on customer requirements for specific applications. Trade names: UNS N08825 W.Nr. 2.4858 Standards: United States: ASTM B423, ASTM B424, ASTM B425, ASTM B564, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829, ASME SB423, ASME SB424, ASME SB425, ASME SB564, ASME SB704, ASME SB705, ASME SB751, ASME SB775, ASME SB829 Europe: EN 10028-7, EN 10088-2, EN 10216-5, EN 10217-7, EN 10272, EN 10296-2, EN 10297-2, EN 10298-2, EN 10222-2, EN 10263-4, EN 10272, EN 10302, EN 10312, EN 10357, EN 1092-1, EN 1092-2, EN 1092-3, EN 1092-4, EN 1092-5, EN 1759-1, EN 1759-2, EN 1759-3, EN 10204, PED 2014/68/EU Germany: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754, DIN 17756, DIN 17758, DIN 17858 France: NF A 49-311, NF A 49-321, NF A 49-322, NF A 49-324, NF A 49-325 United Kingdom: BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA16, ASTM B423, ASTM B424, ASTM B425, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829 Japan: JIS G3101, JIS G3103, JIS G3120, JIS G3141, JIS G3161, JIS G3163, JIS G3192, JIS G3193, JIS G3201, JIS G3214, JIS G3221, JIS G3311, JIS G3445, JIS G4051, JIS G4303, JIS G4304, JIS G4305, JIS G4308, JIS G4309, JIS G4318, JIS G4320, JIS G4321, JIS G4801, JIS G4805, JIS G4808, JIS G5101, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G5510, JIS G5511, JIS G5512, JIS G5521, JIS G5523, JIS G5525, JIS G5528, JIS G5702, JIS G8031 We can provide the following the form:Incoloy alloy825 coil; Incoloy alloy 825 strip;Incoloy alloy 825 plate; Incoloy alloy 825 sheets; Incoloy alloy 825 tube; Incoloy alloy 825 pipe;Incoloy alloy 825 flat; Incoloy alloy 825 bar BS:3072/NF:A 49-311/UNS:N08825/W.Nr:2.4858 Refining and Chemical Processes Distiller chemical reactor Hydrogen Chloride Hydrogenation Reactor Marine Engineering Nuclear Fuel Reprocessing Equipment

Hastelloy X is a high-temperature, corrosion-resistant nickel-chromium-iron-molybdenum alloy. It has excellent high-temperature strength and good oxidation resistance up to 1200�°C, making it suitable for use in a range of applications that require resistance to high temperatures and harsh environments. Hastelloy X is often used in gas turbine engine components such as combustor cans, flame holders, and transition ducts. It is also used in industrial furnace components such as muffles and radiant tubes, as well as in chemical processing equipment and heat exchangers. This alloy has a unique combination of mechanical properties that make it suitable for use in high-stress applications at elevated temperatures. It has good ductility, high strength, and excellent resistance to thermal fatigue and thermal shock. Additionally, it has good resistance to both oxidizing and reducing environments, including wet chlorine and sulfuric acid. Hastelloy X is typically supplied in the solution-annealed condition, which provides good ductility and toughness. It can be easily welded using common welding techniques, and can also be formed and machined using standard methods. Overall, Hastelloy X is a versatile and reliable alloy that offers excellent performance in high-temperature, corrosive environments. Its unique combination of properties makes it an ideal choice for a range of demanding applications in the aerospace, chemical processing, and industrial sectors. Here are the international standards for Hastelloy X: American Standards: AMS 5536: Standard Specification for Heat-Resistant Nickel Alloy Plate, Sheet, and Strip. AMS 5754: Standard Specification for Superstrength Alloy Wrought Nickel Alloys. AMS 5798: Standard Specification for Welding Wire, Corrosion Resistant, Nickel Alloy, Hastelloy X. ASTM B435: Standard Specification for UNS N06002 Alloy Plate, Sheet, and Strip. ASTM B572: Standard Specification for UNS N06002 Nickel Alloy Round Bar. European Standards: EN 2.4665: Nickel and nickel alloys - Plate, sheet, and strip. EN 2.4666: Nickel and nickel alloys - Bars and wire. EN 2.4667: Nickel and nickel alloys - Seamless tubes. EN 2.4694: Nickel and nickel alloys - Welded tubes. Japanese Standards: JIS NW 0675: Nickel and nickel alloys - Plate, sheet, and strip. JIS NW 0676: Nickel and nickel alloys - Bars and wire. JIS NW 0677: Nickel and nickel alloys - Seamless pipes and tubes. JIS NW 0678: Nickel and nickel alloys - Welded pipes and tubes. Chinese Standards: GB/T 14992: Nickel and nickel alloys - Plate, sheet, and strip. GB/T 14994: Nickel and nickel alloys - Bars and wire. GB/T 14996: Nickel and nickel alloys - Seamless tubes. GB/T 14997: Nickel and nickel alloys - Welded tubes. We can provide the following the products:Hastelloy X coil; Hastelloy X strip;Hastelloy X plate; Hastelloy X sheets; Hastelloy X tube; Hastelloy X pipe;Hastelloy X flat; Hastelloy X bar GB/JIS:HR505/UNSï¼?N06002/W.Nrï¼?2.4665

F1 4T 20W-40 API SN | Synthetic Blend 4T Engine Oil For New Generation Motorcycles Applications:F1 4T 20W-40 API SN is premium quality synthetic blend motorcycle engine oil designed with selective base oils and additives chemistry for latest 4-stroke motorcycles. Performance level: API SN, JASO MA2 Features & Benefits: Specially formulated to provide all-around engine protection Creates strong oil film for perfect protection and lubrication Facilitates faster pick- up Maximize engine wear protection Reduces piston deposits & sludge formation Meets the specifications: API SN, JASO MA2 Recommendation: Recommended to use in new generation 4-stroke gasoline engines in high performance motorcycles of all leading global manufacturers.

Applications: Turbo Special 15W-40 API CI-4 is a premium quality synthetic blend engine oil designed to provide excellent performance on modern low emission heavy duty diesel engines. Performance Level : API CI-4, CH-4/SL, SJ, Mack EO-M+, ACEA E7-08, MB 228.2/3, MTU Type 2, MAN M3275, Renault RLD-2, Volvo VDS-3, Cummins CES 20076-78, JASO DH-1 Features & Benefits: Excellent performance to keep engine clean & protected by acids protection and deposit control Long Lasting protection across variety of roads and weather conditions. Unique additive technology with premium base stocks protects oil thickening, piston deposits, wear and corrosion Provides superior soot handling properties & cold start abilities TURBO SPECIAL CI-4 | SAE 15W-40 (SYNTHETIC BLEND) Pack size = 1L,3L,3.5L,4L5L,6.5L,7.5L,8.5L,10L,15L,20L,55L,210L Meets or exceeds the specifications: API.CI-4, CH-4/SL. SJ, MackE0-M+. ACEA E7-08, MB 28.2/3, MTU type 2, MAN M3275, Renault RLD-2, Volvo VDS-3, Cummins CES 20076-78, JASO DH-1 Recommendation : Recommended to use in HCV�¢??S, LCV�¢??s, MUV�¢??s and vehicles with diesel engines from TATA, Ashok Leyland, Eicher, Escort, Mahindra, AMW, Volvo, MAN, Mercedes, Maruti, Hyundai, Ford, Toyota, Skoda & in vehicles requiring CH-4, C6-4, CF-4 oils. This oil is compatible with heavy duty diesel engines used in constructions, mining, agriculture, tractors & other off-road applications.

Flame-retardant textile fabrics are specially designed materials that have undergone treatment to reduce their flammability. These fabrics are engineered to withstand exposure to flames or high temperatures, effectively slowing down the spread of fire and reducing the risk of ignition. These fabrics find extensive use in various industries and applications where fire safety is critical, such as: 1.Industrial Settings: Used in protective clothing for workers in industries like oil and gas, mining, and chemical processing where there is a risk of fire or thermal hazards. 2.Public Spaces: Utilized in public transportation (like trains and airplanes) and public buildings (such as theaters and hotels) to meet fire safety regulations and protect occupants. 3.Home Furnishings: Used in curtains, upholstery, and bedding to enhance fire safety in residential settings. Flame-retardant textiles are typically treated with chemical agents during manufacturing or finished with inherently flame-resistant fibers like modacrylic, aramid, or certain polyester blends. These fabrics undergo rigorous testing to meet industry standards and regulations for fire safety.

Product Name : BURNER OIL/LDO Product Description : Density 0.84-0.87 Price of product ( USD price or FOB price) : CFR MUNDRA /NEVA SHEVA USD 470-520 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details : Flexi Containers

Product Name : Fuel Oil Product Description : DENSITY 0.92 - 0.98 Price of product ( USD price or FOB price) : CFR MUNDRA/NEVASHEVA USD 400-450 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details : FLEXI CONTAINERS