MODEL: DY220 TECHNICAL PARAMETER TABLE A B C INJECTION UNIT SCREW DIAMETER mm 45 50 55 SCREW L/D RATIO L/D 24.4 22 20 INJECTION CAPACITY (THEORETICAL) cm3 397 490 593 INJECTION WEIGHT(PS) g 362 446 540 INJECTION RATE g/s 124 154 186 INJECTION PRESSURE Mpa 207 168 138 SCREW SPEED rpm 180 CLAMPING UNIT CLAMP FORCE KN 2200 OPEN STROKE mm 475 SPACE BWTWEEN TIE-BARS (WÃ??H) mm 520*520 MAX. MOULD HEIGHT mm 560 MIN. MOULD HEIGHT Mm 200 EJECTOR STROKE Mm 150 EJECTOR FORCE Kn 70 OTHERS PUMP PRESSURE MPa 16 MOTOR POWER KW 18.5 HEATING POWER KW 14 MACHINE DIMENSION (LÃ??WÃ??H) m 5.7*1.6*2.3 OIL TANK CAPACITY L 300 MACHINE WEIGHT t 7 High-precision clamping mechanism guarantees product accuracy while extending die life. Stable and reliable die stop termination repeatability, perfect coordination with automated production aids, such as robotic hand systems, visual die safety monitoring systems, etc. The precision high-speed injection system improves the dimensional accuracy of the product, effectively suppresses the generation of flash, and reduces the residual internal stress of the product.
Flow: 15m3/h Head: 26m Power: 2.2kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 15m3/h Head: 39m Power: 4kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 15m3/h Head: 54m Power: 4kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 150m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 165m Power: 11kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 180m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 195m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 210m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 225m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h Head: 240m Power: 15kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Stem distillation (stems,leaves & flowers) 0.5LiterThe specifications of XY-8 well drilling machine Drilling Pipe Type Parameters Drilling Depth Drilling pipe 50X4.75 2200m 50X5 2000m 60X6 1450m 71X5 1650m 73X7 1000m 89X5 1300m 89X10 600m DCDMA (diamond core drill association) drilling pipe Internal upset drill pipe BW Drill Rod 2200m NWD rill Rod 1700m HWD rill Rod 1150m Wire-line coring drill pipe BQ Drill Rod 2200m NQ Drill Rod 1700m HQ Drill Rod 1150m PQ Drill Rod 800m BCQ Drill Rod 2500m NCQ Drill Rod 2000m HCQ Drill Rod 1550m Drilling angel 75-90 Electric motor Y280S-4 /75KW Diesel engine YC6A240-33/ 177KW Gyrator 96mm Forward speed 74/106/150/208/300/431 Inversion speed 110rpm Power diesel engine Forward speed 110/157/222/309/445/640/905/1256 Inversion speed 74rpm Max.torque of spindle 8000nm Spindle stroke 800mm Max.lifting force of spindle 180kn Max.thrust of spindle 110kn Type Planetary gear drive, hand brake Wire rope diameter 21.5mm(6X19) Drum capacity for rope 120m Max.lifting force(single rope) 60kn Lifting speed of the wire rope Power unit rotary speed 1480rpm(m/s) 0.48/0.68/0.96/1.34/1.96/2.81/3.96/5.51 Power unit rotary speed 2300rpm(m/s) 0.71/1.01/1.42/1.99/2.91/4.17/5.88/8.19 Transmission Shanxi Fast Gear 8JS118 transmission and ancillary clutch, safe and reliable. Oil pump type/ model gear oil pump/ CB-32 Rotary speed 2500r/min Displacement 32 ml/r Work pressure 20mpa Max.pressure 25mpa Direction of rotation Right(see from shaft end) Work rotary speed 700-1800r/min Single rope compensational speed 3-8m/s Single rope compensational load 45kn Form skids type(with sliding base) Rig backward stroke 530mm Dimensions(L*W*H) 3800*1500*2460mm Rig Weight 6500kg Shandong Master Machinery Group Co.,Ltd. Sales Managerï¼?CocoYan Wechat: 18865479510 Whatsapp: 008618865479510 QQï¼?3048400352 Sales hotlineï¼?400-167-0537 Tel: 86-0537-3860909 Website: http://www.sdjujiang.com
a. Used Cooking Oil b. $1950.00 USD per MT CIF c. Africa d. Specifications: Free fatty acids: 2.0 % Moisture / Impurities: 0.02 % Saponification value: 186 Iodine value: 120 Titre c (melting point): 13.75" c TFM: 95% Specific gravity @ 25'c: 0.915 Density (kg/m3): 920 Flashpoint by p.-m. (degree c): 220 Calorific value (kj/kg): 36,000 Kinematic viscosity (40 deg.c) (mm2/s) Carbon residue (mass-%): 0.4 Iodine number (g/100g): 110 Sulphur content (mg/kg): 18 Variable properties: Acid value (mg koh)/g): 2.0 Oxidation stability (110 deg.c) (h) 5.0 (min) Phosphorus content (mg/kg): 15 Ash content (mass%): 0.01 Water content (mass%): 0.075 Customized packing: According to clients' requirements e. 151790 f. 300 MT g. IBC / Flexi-tank *Customized packing available-according to clients requirements.
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution Up to 2400 x 1200 optimized dpi Minimum Ink Droplet Size Light cyan, light magenta, light grey, photo black: 4 pl Cyan, magenta, yellow, matte black: 6 pl Ink Type HP Vivera pigment ink Ink Palette Cyan, magenta, yellow, light cyan, light gray, light magenta, matte black, photo black Ink Cartridge Configuration 8 individual ink cartridges Performance Print Speed Line drawings: 42 sec/page on D, 42.1 D prints/hour Color: Fast 445 ft/hr on plain media, Best 5.1 min/page on D or up to 58 ft/hr on glossy media Input Buffer 32 GB (virtual memory capacity) 160 GB hard disk Paper Handling Maximum Paper Width 44.0 Maximum Printable Area Sheets: 44.0 66.0 Rolls: 11.0 44.0 Paper Sizes Sheets: 8.5 1 44 66 Rolls: 11 to 44 Borderless Photo Sizes Standard: narrow margin Oversize: image printed on a page slightly larger than the size selected and cut by printer Borderless: image is slightly enlarged to ensure that no margin is left between the edges of the image and the edges of the paper Paper Types Photographic, proofing, fine art printing material, self-adhesive, banner and sign, bond and coated, backlit, fabric/textile Special Media Support Backlit, fabric, textile Media Thickness 31.5 mil Maximum Media Roll Diameter 44.0 Maximum Roll Print Length 300.0 (91.44 m) Paper-Feed Method Sheet feed, roll feed Connectivity Computer Interface Gigabit Ethernet (1000Base-T); Hi-Speed USB 2.0 certified; EIO Jetdirect accessory slot Network Capable Ethernet Graphics Support Languages supported: HP-PCL3 GUI, CALS/G4, PostScript, PDF, TIFF, JPEG Windows System Requirements XP or newer Mac OS System Requirements 10.4 or newer
Printing Method Printing Technology HP Thermal Inkjet, Scalable Printing Technology Print Resolution Input: 1200 x 1200 dpi Optimized: Up to 2400 x 1200 dpi Print Speed Best Glossy Media: 15 min/page (A1/D) Normal Glossy Media: 7.9 min/page on A1/D Normal Coated Media: 4.2 min/page on A1/D Draft Coated Media: 2 min/page on A1/D Ink Type HP Vivera pigment ink Ink Palette Cyan, magenta, yellow, light cyan, light magenta, matte black, photo black, light gray Ink Droplet Size 4 pl: light cyan, light magenta, light gray, photo black 6 pl: cyan, magenta, yellow, matte black Number of Nozzles Per Color: 1056 nozzles Total: 8448 nozzles Line Accuracy �±2% Lightfastness ~200 years fade resistance Water Resistance Water-resistant on a range of HP creative and specialty media Image Quality Color Accuracy Median: < 1.6 dE2000 95% Of Colors: < 2.8 dE2000 Color Stability < 1 dE2000 in less than 5 minutes Repeatability Average < 0.5 dE2000, 95% of colors < 1.4 dE2000 print-to-print repeatability Maximum Optical Density 4 L min / 2.5 D Paper Handling Paper-Feed Method Sheet feed, roll feed, automatic cutter (cuts all media except canvas) Media Types Photographic, proofing, fine art printing material, self-adhesive, banner and sign, bond and coated, film, backlit, fabric/textile Media Weight Up to 133 lb (500 g/m2) Media Thickness Up to 31.5 mil (0.8 mm) Paper Sizes Sheet: 8.5 x 11.0â?³ to 24.0 x 66.0â?³ (21.59 x 27.94 to 60.96 x 167.64 cm) Roll: 11.0 to 24.0 (27.94 to 60.96 cm) wide Margins Sheet: 0.2 x 0.67 x 0.2 x 0.2 (5.0 x 17.0 x 5.0 x 5.0 mm) Roll: 0.2 x 0.2 x 0.2 x 0.2 (5.0 x 5.0 x 5.0 x 5.0 mm) Maximum Roll Print Length 300 (91.44 m) Connectivity Memory 128 MB Hard Disk Capacity 80 GB Interface Fast Ethernet (10/100Base-T) port Hi-Speed USB 2.0 certified port EIO Jetdirect accessory slot Printer Language HP PCL 3 GUI OS Compatibility Windows: Vista (32 & 64-bit), XP (Home and Professional, 32 and 64-bit), Server 2008 (32 and 64-bit), Server 2003 (32 and 64-bit) Mac: OS X v 10.4 and 10.5 General Attributes Power Requirements 100 to 240 VAC (±10%), 50/60 Hz (±3 Hz), 2 A max Power Consumption 200 Watts maximum Certifications Safety: IEC 60950-1 compliant, EU LVD and EN 60950-1 compliant, certified by CSA for Canada and US, Argentina IRAM, Singapore PSB, Russia GOST, China CCIB, Taiwan BSMI Electromagnetic: EU (EMC Directive), USA (FCC rules), Canada (DoC), Australia (ACA), New Zealand (MoC), China (CCC), Japan (VCCI), Korea (MIC) and Taiwan (BSMI) Temperature / Humidity Operating Temperature: 41 to 104 �°F (5 to 40 �°C) Recommended: 59 to 95 �°F (15 to 35 �°C) Storage Temperature: -13 to 131 �°F (-25 to 55 �°C) Operating Humidity: 20 to 80% Storage Humidity: 0 to 95% Acoustics Sound Pressure Active: 49 dB(A) Sound Pressure Standby: 29 dB(A) Sound Power Active: 6.5 B(A)
Model Power (w) Voltage (V/Hz) Max Head (M) Max Flow (M3/h) Speed (r/min) Piping (MM) Q(D)X 1.5-17-0.37 0.37 220V/380 17 1.5 3000 25 Q(D)X3-20-0.55 0.55 220V/380 20 3 3000 25 Q(D)X10-12-0.55 0.55 220V/380 12 10 3000 38 Q(D)X 15-7-0.55 0.55 220V/380 7 15 3000 50 Q[D)X 1.5-32-0.75 0.75 220V/380 32 1.5 3000 25 Q(D)X7-18-0.75 0.75 220V/380 18 7 3000 38 Q(D)X10-16-0.75 0.75 220V/380 16 10 3000 50 Q(D)X15-10-0.75 0.75 220V/380 10 15 3000 64 Q(D)X15-15-1.1 1.1 220V/380 15 15 3000 50 Q(D)X6-26/2-1.1 1.1 220V/380 26 6 3000 38 Q(D)X25-10-1.1 1.1 220V/380 10 25 3000 64 Q(D)X40-7-1.1 1.1 220V/380 7 40 3000 76 Q(D)X 15-18-1.5 1.5 220V/380 18 15 3000 50 Q(D)X6-33-1.5 1.5 220V/380 33 6 3000 64 Q(D)X25-13-1.5 1.5 220V/380 13 25 3000 64 Q(D)X40-9-1.5 1.5 220V/380 9 40 3000 76 Q(D)X65-7-2.2 2.2 220V/380 7 65 3000 100
Model Power (w) Voltage (V/Hz) Max Head (M) Max Flow (M3/h) Speed (r/min) Piping (MM) Q(D)X 1.5-17-0.37 0.37 220V/380 17 1.5 3000 25 Q(D)X3-20-0.55 0.55 220V/380 20 3 3000 25 Q(D)X10-12-0.55 0.55 220V/380 12 10 3000 38 Q(D)X 15-7-0.55 0.55 220V/380 7 15 3000 50 Q[D)X 1.5-32-0.75 0.75 220V/380 32 1.5 3000 25 Q(D)X7-18-0.75 0.75 220V/380 18 7 3000 38 Q(D)X10-16-0.75 0.75 220V/380 16 10 3000 50 Q(D)X15-10-0.75 0.75 220V/380 10 15 3000 64 Q(D)X15-15-1.1 1.1 220V/380 15 15 3000 50 Q(D)X6-26/2-1.1 1.1 220V/380 26 6 3000 38 Q(D)X25-10-1.1 1.1 220V/380 10 25 3000 64 Q(D)X40-7-1.1 1.1 220V/380 7 40 3000 76 Q(D)X 15-18-1.5 1.5 220V/380 18 15 3000 50 Q(D)X6-33-1.5 1.5 220V/380 33 6 3000 64 Q(D)X25-13-1.5 1.5 220V/380 13 25 3000 64 Q(D)X40-9-1.5 1.5 220V/380 9 40 3000 76 Q(D)X65-7-2.2 2.2 220V/380 7 65 3000 100
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution Up to 2400 x 1200 optimized dpi Print Speed Print Time Line Drawing: 21 sec/page on A1/D (economode) Print Speed Line Drawing: 120 A1/D prints per hour (economode) Ink Droplet Size 6 pL (C, M, Y, G, pK); 9 pL (mK) Ink Type 5 dye-based (C, M, Y, G, pK; pigment-based (mK) Ink Cartridge Configuration 6 individual ink cartridges (cyan, gray, magenta, matte black, photo black, yellow) Ink Cartridge Capacity 130 or 300 mL Margins Top x Bottom x Left x Right: Roll: 0.12 x 0.12 x 0.12 x 0.12 (3 x 3 x 3 x 3 mm) Sheet: 0.12 x 0.87 x 0.12 x 0.12 (3 x 22 x 3 x 3 mm) Line Accuracy ±0.1% Printhead 1 (C, G, M, mK, pK, Y) Minimum Line Width 0.8 mil (0.02 mm) (HP-GL/2 addressable) Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E)) Maximum Optical Density Black: 2.15 D (6 L* min) Applications Line drawings, renderings, presentations, maps, orthophotos Memory 64 GB (file processing) 320 GB Media Types & Handling Paper Handling Input: Automatic front-loading roll feeds, sheet feed Output: Integrated output stacking tray (from A4/A to AO/E, with up to 50 A1/D-size capacity), media bin, automatic cutter
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution 1200 dpi Printer Language Adobe PostScript 3, Adobe PDF 1.6, TIFF, JPEG, HP PCL 3 GUI Ink Droplet Size 4.0 pl: Light cyan, light magenta, light gray, photo black, gray, gloss enhancer 6.0 pl: Magenta, yellow, matte black, chromatic red, green, blue Ink Type HP Vivera pigment inks Ink Palette Blue, green, magenta, chromatic red, yellow, gray, photo black, matte black, light cyan, light gray, light magenta Ink Cartridge Configuration 6 printheads: 1: light magenta & light cyan printhead 2: magenta & yellow printhead 3: photo black & light gray printhead 4: blue & green printhead 5: matte black & chromatic red printhead 6: gloss enhancer & gray printhead Number of Nozzles 2112 per printhead (1056 nozzles per color) Print Speed Best (Glossy): 12.4 min/page on D/A1 Normal (Glossy): 7.2 min/page on D/A1 Normal (Coated): 3.8 min/page on D/A1 Draft (Coated): 2.0 min/page on D/A1 Input Buffer 256 MB Storage Capacity 80 GB hard disk Print Archival Life Approximately 200 years fade resistant Waterproofing Water-resistant on a range of HP creative and specialty media Paper Handling Maximum Paper Width 24.0 (60.96 cm) Maximum Printable Area Sheets: 24.0 x 66.0 (60.96 x 167.64 cm) Rolls: 24.0 x 300.0 (60.96 cm x 91.44 m) Paper Types Photo: Satin, Gloss, Semi-Gloss, Matte, Baryte Paper Proofing: Semi-Gloss, High-Gloss Contract, Semi-Gloss Contract, Matte Fine Art: Smooth, Textured, Watercolor, Satin, Aquarella, Litho-Realistic, Canvas Self-Adhesive: Indoor, Vinyl, Polypropylene Banner/Sign: Display Film, Indoor Banner, Scrim, Polypropylene, Tyvek, Outdoor, Billboard, PVC-Free Bond & Coated: Bond, Coated, Heavyweight Coated, Super Heavyweight Plus Matte, Colored Technical: Tracing, Translucent Bond, Vellum Film: Clear, Matte, Polyester Backlit Fabric/Textile: Flag, Polyester, Silk Special Media Support Satin, vellum, canvas, Tyvek, banners, backlit Media Thickness Up to 31.5 mil (0.8 mm) Media Weight Up to 133 lb (500 g/m) Maximum Roll Print Length 300 (91.44 m) Maximum Media Roll Diameter 5.3 (13.46 cm) Paper-Feed Method Sheet feed, roll feed, automatic cutter (cuts all media except canvas)
CXT526 Instruction Company Strength: Keep goods in stable physical performance Confirm big quantity supply in long time Information: 1. CXT526 is one kind of PA12, similar to TR90 of EMS Grilamid, a kind of transparent Nylon, low cost alternative raw materials made in China. 2. Independent R&D and produced by Shandong Xiang long 3. Injection-molding , easy processing 4. Memorized and resilience material 5. Food contact approval and anti-allergy 6. Now have been maturely applied to glasses frames, oil cups and water dispenser parts. Typical Characteristics: 1. Superior transmission 2. Permanent transparency 3. Easy coloring 4. Good toughness, high strength 5. Good chemical and solvent resistance 6. Good mold-ability 7. Excellent abrasion and scratch resistance 8. High dimensional stability 9. High stress crack resistance 10. Low density and light quantity 11. Food contact approval and Anti-allergy. Advantages (show in frames industry): 1. Superior yellowing resistance 2. Lowest background color and keep stable for every batch 3. Fusion Knot Strength Test (Each batch) 4. Superior tortoise shell pattern 5. No need to drying Items Unit Inspection standards Test indicators Charpy notched impact KJ/m² GB/T1043-93 15 Charpy non-notched impact KJ/m² GB/T1043-93 25JNB Tensile strength M Pa GB/T1040-92 60 Elongation at break % GB/T1040-92 160 Flexural strength M Pa GB 9341-2000 70 Flexural modulus M Pa GB 9341-2000 1625 Density g/cm³ GB 1033-86 1.03 Shore D hardness GB 2411-80 82 HDTï¼?0.45MPaï¼? â?? GB 1634-79 120 Light transmittance % â??â?? 92 Application: 1. Optics: Frames & Optical components etc. 2. Packaging: Cosmetics packaging, Medical packaging etc. 3. Food contact: Feeding bottle, coffee machine, cup and so on. 4. Industry: Auto parts (oil cups, tanks and so on) Mechanical engineering 5. Electronic Products: Headphone, Ear-hook, etc. 6. Consumer Goods: Sports & Leisure, Tools & Accessories, etc.