WS-C2960L-8PS-LL WS-C2960L-8TS-LL WS-C2960L-16PS-LL WS-C2960X-24PS-L WS-C2960X-24TS-LL WS-C2960X-24TS-L WS-C2960X-48FPD-L WS-C2960L-48PQ-LL WS-C2960L-24TS-AP WS-C2960L-24PS-AP WS-C2960CX-8PC-L WS-C2960CX-8TC-L WS-C2960X-24PSQ-L WS-C3850-12S-S WS-C3560CX-12PC-S WS-C4500X-16SFP+ WS-X4748-SFP-E C9200L-24P-4X-E C9200L-48P-4X-A C9200L-48P-4G-E C9200L-48P-4X-E C9200L-STACK-KIT C9200L-24P-4X-E C9200L-24T-4G-E C9200L-24T-4X-E C9200-48T-A C9200-24T-A C9200-24T-E C9200-48T-E C9200-25T-A C9200-24P-A C9200-NM-4X C9300-24P-E C9300-48P-E C9300-48T-E C9300-NM-8X C9300-24U-E C9300L-24P-4X-A C9500-16X-E C3850-NM-4-1G C2960X-STACK ISR4331/K9 NIM-1T= NIM-2T= NIM-4FXO NIM-1GE-CU-SFP= NIM-2GE-CU-SFP QSFP-40G-SR-BD CP-8851-K9 CP-DX80-K9 GLC-LH-SMD GLC-SX-MMD SFP-10G-SR-S SFP-10G-ZR SFP-10G-LRM SFP-H10GB-CU3M SFP-H10GB-CU5M QSFP-40G-SR4 QSFP-40/100G-SRBD QSFP-4SFP10G-CU1M QSFP-4SFP10G-CU2M QSFP-4SFP10G-CU3M QSFP-4SFP10G-CU4M QSFP-4SFP10G-CU5M GLC-TE NIM4T= PWR-C5-1KWAC/2 ASA5525-FPWR-K9 SPA-1X10GE-WL-V2� N3K-C3172TQ-10GT N5K-C56128P N9K-C93180YC-EX N3K-C3172PQ-10GE CS-KITPLUS-K9 SG350-10MP-K9 C1-CISCO4331/K9 EHWIC-1GE-SFP-CU CPAK-100G-LR4� ISR4451-X/K9 CVR-QSFP-SFP10G
With HPC008, You will get: High accuracy customer-flow data Detailed data report chart Real-time customer flow on every floor Any change of the customer-flow data and average data How many people in shop now Customer-flow density at different location Average stay time of visitor The rate of purchase Data can be exported in different form for analyzing and integrating Specification Item Specifications Size 18.9(L)*14.5(W)*5.8(H)CM Processor ARM cortex A7>1GHzï¼?28nmï¼? Sensor Video Input cmos /Simplex high definition Video Compression standard H.264, YUY2 Video Definition Adjustable Image Processing Exposure Control/ Gain Control/ White Balance/ Gamma Correction Video Frame rate 30fps Measuring Range 2m Installation Height 2.5-5.0m Port protocol Network Interface RJ45, 10M/100M, Adaptive to Ethernet port Protocol Standard 802.11a or 802.11b/g Maintenance Interface Micro USB SD card Built-in, 8 32G Electronic Clock Built-in, RTC module Remote Upgrade Upgrade By The Website Physical Parameter Size 120mm*120mm*48mm Weight 200g Adapter +5V/2A Power â?¤10W/ POE optional Hardware Monitoring Hardware Watchdog Temperature -20+65 Model Model Installation Height HPC008-2.1 2.6--2.7 M HPC008-2.5 2.8--3.0 M HPC008-2.8 2.9--3.2 M HPC008-3.6 3.2--3.8 M HPC008-4 3.9--4.4 M HPC008-6 4.4--5.1 M The critical height, advised to choose a large lens Remark This test results is based on persons of average 1.7M Effective width detection 2M Advantages High Accuracy Rate 95%-98% 1. It counts according to person's head, so it can solve the problem when people walking shoulder by shoulder. 2. It eliminates the invalid pass by setting a counting area. 3. Different camera for different ceiling height. Data Safety 1. Network-off protection: The data can be saved in the device for 10,000 seconds (about 3 hours), even there is no network. 2. The data can be exported in PNG, JPG, PDF form. 3. Data backup: When the IP address is changed, the data can be backed up. Data Transmission 1. The data can be transferred to server directly. 2. It can work in WiFi network. Data Report 1. Detailed valid in-out-stay data. 2. Data from different entrances in different shops can be distinguished. 3. Sales info can be inputted manually. It is convenient for shop to make the commercial solution. 4. With a API, the data can be integrated into POS/ ERP system. Power Supply Adapter or POE as your requirement.
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by USB Port Blockers LINDY: We supply a complete range of the manufacturerâ??s catalog, including the following items: LINDY 40464 LINDY 40451 LINDY 40462 LINDY 40454 LINDY 40452 LINDY 40453 LINDY 40461 Our company is also pleased to offer products of other brands: Bei Sensors IBH Softec Schmersal BALLUFF Pepperl+Fuchs Bernstein Di-Soric Elobau Univer Eltra Aventics FESTO Camozzi Euchner END-Armaturen TAMAGAWA SENECA Airtac Murrelektronik Azbil Yamatake FRANKE-Filter Endress+Hauser IFM Ipf Electronic Kieback & Peter MD Micro Detectors Bihl Wiedemann ANDERSON-NEGELE KITAGAWA Georg Schlegel Metal Work Kipp Allen-Bradley Netter Vibration Kuebler / K�¼bler RAFI LINDY 4B Braime SOUTHCO ELGO Electronic FAG RECO Pilz AIRTEC Pneumatic COMITRONIC-BTI L�¼tze Hydac Barksdale Keyence AirCom Pneumatic Garlock Mac Valves MAHLE (Filtration Group) Riegler Baumer Elreha Sick Siko FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world. Our mission is to provide fair prices, reducing the cost of production for our customers. A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms. Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site. You are welcome to check the full catalog on our website."
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Ethernet Gateways for the SIMATIC IBH Softec: We supply a complete range of the manufacturerâ??s catalog, including the following items: Ethernet Gateways for the SIMATIC 20266 Ethernet Gateways for the SIMATIC 20220 Ethernet Gateways for the SIMATIC 20284 Ethernet Gateways for the SIMATIC 20268 Ethernet Gateways for the SIMATIC 1150 Our company is also pleased to offer products of other brands: Bei Sensors IBH Softec Schmersal BALLUFF Pepperl+Fuchs Bernstein Di-Soric Elobau Univer Eltra Aventics FESTO Camozzi Euchner END-Armaturen TAMAGAWA SENECA Airtac Murrelektronik Azbil Yamatake FRANKE-Filter Endress+Hauser IFM Ipf Electronic Kieback & Peter MD Micro Detectors Bihl Wiedemann ANDERSON-NEGELE KITAGAWA Georg Schlegel Metal Work Kipp Allen-Bradley Netter Vibration Kuebler / K�¼bler RAFI LINDY 4B Braime SOUTHCO ELGO Electronic FAG RECO Pilz AIRTEC Pneumatic COMITRONIC-BTI L�¼tze Hydac Barksdale Keyence AirCom Pneumatic Garlock Mac Valves MAHLE (Filtration Group) Riegler Baumer Elreha Sick Siko FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world. Our mission is to provide fair prices, reducing the cost of production for our customers. A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms. Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site. You are welcome to check the full catalog on our website."
The SIM7600G is Multi-Band LTE-FDD/LTE-TDD/HSPA+ and GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT1 up to 10Mbps data transfer. It has strong extension capability with rich interfaces including UART,USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.The package of SIM7600G is LCC+LGA. The package (LCC part) of SIM7600G is compatible with SIM7600x (LTE CAT1 Variants module with LCC package). AT commands of SIM7600G are mostly compatible with SIM7500/SIM7600 Series modules. This also minmize the investments of customers, and enables a short time-to-market. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications.
APPLICATIONS: Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge. CAT5e and CAT5 compatible IEEE 802.3af803.1at 10/100 Base-T Ethernet protection LAN, FDDI, CDDI, ATM,WLAN PDH, SDH, SPDH Industrial control Industrial POE, With High reliability and high stability Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system. FEATURES: Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common mode and differential mode TVS array technology, low capacitance Multi-Strike Capability Patent technology TECHNICAL PARAMETER Model POE5-48 Power Parameter Working voltage Un 48V Max. continuous operating voltage Uc 60V Nominal discharge current8/20µsIn 5kA Max. discharge current 8/20µsImax 10kA Protection level 8/20µsUp 150V Protection line 4/5, 7/8 Ethernet Parameter Max. continuous operating voltage Uc 5V Limiting voltage (10/700µs) Up Line-Ground â?¤500V Line-Line â?¤20V Nominal discharge current8/20µsIn 3kA Max. discharge current 8/20µsImax 5kA Adapt transmission rate 100Mbps Insertion loss â?¤0.5dB Protection line 1/2, 3/6
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
Description : HDV-8FE POE+2FE UP-ND is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
Datasheet:http://www.e-lins.com/EN/download/H900-Datasheet-Eng.pdf More details contact: sales9(at) elins. com E-Lins H900 Series Router is the Dual Core CPU Gigabit and powerful high performance of Dual SIM 4G / 3G router designed for critical infrastructure, M2M, IoT and industrial applications; Dual Core CPU 880MHz Frequence; WAN RJ45 * 1 + LAN RJ45 * 4 + DIO + Serial + USB; 802.11n and 802.11AC 2.4GHz + 5GHz Dual band or Tri band WiFi; Industrial, rubust, secure and high reliable built-in 4g modem with 2 sim card slots, fail over and load balance; High data speed via 4G 3G 2G networks MIMO; Secure data transactions with advanced VPN options; Advanced dynamic routing, security and firewall features; Centralized manageable; GNSS GPS tracking optional; Serial port * 2; USB3.0 * 1; DI / DO port * 4; Wide range power input, dual power input;
EDAM-9052 8 DI and 8 DO channels Digital I/O Module * Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP * Ethernet 10/100 Based-T Communication * Support 8 isolated digital output with Open Drain. * Provide 3A/per output channel. * Provide Pulsed/delay Output Mode * Support 8 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry Contact Inputs * Fully Photo-Isolation 3750Vrms
PT-PSE100GFN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32 amp. PoE Injector manufacturer:Creative Lianjie Network Technology Designed for the AT powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at devices. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter PoE Injector for door locks Description Key Features 1. Output: 48Vdc, 320mA, 15.4W 2. Transmission Rate: 10/100/1000Mbps 3. Power Pin: 4/5(+),7/8(-) Part Number PT-PSE100GFN Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power: 30W Guaranteen Input Input Voltage: 100-240Vac Frequency: 50/60Hz Typ Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: plastic Color: Black Mounting:Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 135mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE, FCC
PT-PSE100G-24 is a single port midspan Injector with 2 Pair PoE up to 26 watts of power at 24 VDC at 1100 amp. Designed for the outdoor PoE Injector, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 0/100/1000Mbps of data rates. Fully comply with IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with wall-mounted. It operates with a wide input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). The POE Injector are Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. We are PoE Injector supplier and more information you can view here We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. high quality PoE Injector Specifications Parameter Description Key Features 24VDC output voltage Wall-mounted Part Number PT-PSE100G-24 Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 24Vdc User Port Power: 26W Guaranteen Input AC Input Voltage: 100 to 240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) DC Input Current: 1A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 134mmX 56mmX 33mm Weight: 150gï¼?5.3ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green Warranty 2 year Safety Approvals CE/FCC
POE Injector For IOT Application PT-PSE10GN PT-PSE10GN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32amp. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. waterproof POE Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. outdoor PoE Injector Enclosed in an IP40 fire retardant plastic case, designed for plug and play indoor use with compact structure. outdoor PoE Injector operates with a wide input voltage of 100-240Vac 0.5A, The effective distance is 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) Parameter Description Key Features Single-port Wall-mounted poe Part Number PT-PSE10GN Ports condition LAN Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage:48Vdc User Port Power: 15.4W Guaranteen Input Input Voltage:100-240Vac Frequency:50/60Hz Typ Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: plastic Color: White Mounting: IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 83X 51X 69mm Weight: 380g(0.83lb) LED Indicator Power Indicator: Red PoE Load Indicator: Green Warranty 2 year Safety Approvals CE, FCC
60W PoE Injector PT-PSE104GB-60-10 PT-PSE104GB-60-10 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps/10GBps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We are PoE supplier Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. 60W PoE Injector operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Outdoor POE Injector Specifications Parameter waterproof POE Description Key Features Wall-mounted Part Number PT-PSE104GB-60-10 Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10GBit/s Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input AC Input Voltage: 100-240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) AC Input Current:1.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 145.51mm X 65.8mm X 33.5mm Weight: 255gï¼?8.99ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals cUL/UL/FCC/CE
indoor Industrial PoE injector PT-PSE104GB-60-5 PT-PSE104GB-60-5 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Designed for the poe injector 60w (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps/5GBps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). PoE Injector for camera Parameter Description Key Features Wall-mounted Part Number PT-PSE104GB-60-5 Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 2.5GBit/s,5Gbit/s Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input AC Input Voltage: 100-240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) AC Input Current:1.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 145.51mm X 65.8mm X 33.5mm Weight: 255gï¼?8.99ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals cUL/UL/FCC/CE