Liquid Pad Printing Silicone Rubber Suppliers and Manufacturers

Food ingredients, animal feed raw materials, and chemicals used in many fields, including construction, petroleum, mining, agriculture, printing, rubber, detergent, etc. .

Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds Artificial Stone & Concrete Casting Silicone Rubber Features: Amazing fluidity and easy to operate Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic) Delicate design available Mixing ration: 1:1, easy to mix Easy de-molding Excellent tension and tear strength High performance in duplication Shrinkage is almost zero (below 0.1) Excellent resistance to weather, temperature, aging, acid and aging-proofing. High resistance to high temperature and aging(resist -60â?? to 250â??) Appearance: Part A:a non-toxic and odorless liquid with translucent color and platinum inside. Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements. Technical Data Characteristics of the non cured product Properties G-820 G-825 G-830 G-835 G-840 A B A B A B A B A B Appearance low viscous liquid Colour translucent Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10 Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000 Polymerisation Curing conditions: 1h at 80 �°C Properties G-820 G-825 G-830 G-835 G-840 Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2 Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10 Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50 Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2 Application: GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc. Operation Method: Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing. Notice What is the hardness should I choose? Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design. Warm Tips: The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry. Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing. Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices). Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include: -Natural or synthetic rubber, vulcanized with sulphur derivatives. -Poly-condensation RTV catalyzed with metallic salts. -PVC stabilizing agents. -Amine cured epoxies. -Sulphur, tin and amines derivatives. -In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.

Description of platinum curing mould making liquid silicone rubber Addition cure silicone is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. It can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making. Application of platinum curing mould making liquid silicone rubber Silicone rubber is mainly used for making molds of tire, concrete stone, grc, polyurethane products; wax, candle decoration; rapid prototyping and tyre molds; chocolate, candy and similar products.

Detergent powder, washing powder, dish wash bar, dish wash liquid, hand wash gel, phenyl, toilet cleaner, steel wool, incense stick, sanitary pad, detergent liquid.

Brief description: Silicone rubber for mold making: 1. Resistance to deformation, high-temperature 2. High reproduction times 3. Good tensile strength 4. Exceptional fluidity and good operability. 25kg/drum

1. Application of liquid silicone rubber : 1. Liquid silicone rubber can used forpoly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, 2. Liquid silicone rubber is applicable for large statue buddha, relievo furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, 3. Liquid silicone rubber is intend forartificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 2. Features of liquid silicone rubber: Liquid silicone rubber is white or red flowing liquid with general hardness of 22-50 after curing with features - (1)high tensile & tear strength (2) high duplication times (3) low linear shrinkage (4) resistance to high-temperature (5) resistance to deformation (6)resistance to acid-alkali and expansion 3.Tips for liquid silicone rubber : 1. Weigh the liquid silicone rubber and curing agent exactly . 2. Stir the liquid silicone rubber and curing agent evenly . 3.We should choose the right hardness to making different size of product mold. 20kg/drum 200kg/drum

Applications of Manual Mold Silicon rubber: Manual silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. Features of Manual Mold Silicon rubber: Manual mold silicone has good elasticity, non-deformation , high temperature resistance, low shrinkage. And it is suitable for manual mold design and small duplication mold production. Payment Terms:L/C, T/T Port: Shenzhen Minimum order quantity:200kg Supply ability:8 tons/day Deliverly Time:within 3 days after getting bank receipt Package:25kg/drum and 200kg/drum.

Silicone rubber for manual moulding applications The manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. Silicone rubber for manual moulding features the manual mold silicone rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. Specification of manual moulding silicone rubber Model HY-518# Appearance White Viscosity 12000~15000 Hardness (Ao) 22~30 Tensile Strength 7 Tear trength (kgf/cm) 3 Shrinkage (%) 0.3 Elongation (%) 200 Mixing Ratio(%) 3 Operating Time (H) 0.5 Curing Time(H) 2-4 25kg/drum, 200kg/drum

This kind of Liquid Silicone Rubber Products (LSR) are suitable for parts of medical treatment etc. All kinds of specifications could be made by different requirements. Technology Theory: Due to LSR is solidified by pyrogenation molding reactivity, so the speed of solidify is quickly and it increases production efficiency of LSR products. Main Function: LSR products are used in developed countries widely, used in sanitation bathroom, medical equipments and advanced commodities and so on.

Pad printing silicone rtv application Pad printing silicone rubber usage For the pad printing of plastic toys, pvc toys, craftworks. (1) pad printing silicone rtv with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding american dupont teflon high-temperature resistance new material, is processed through high-temperature machining. (2): pad printing silicone rtv is also mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. Pad printing silicone rtv standard datasheet Model Appearance Viscosity (cs) Hardness (ao) Tensile strength (kgf/c) Tear strength (kgf/cm) Shrinkage (%) Elongation (%) Mixing ratio(%) Operating time(h) Curing time(h) 912 R/g 20000~25000 28~30 35 24 0.3 400 2~3 0.5 2~4 20kg/drum, 200kg/drum

1. Description YJS-620 is a two-component 1:1 Mix addition (platinum)cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin and easy to pour.    2. Features *high chemical resistance to the aggressive components of some types of resin *High resistance to laceration (this characteristic guarantees high resistance to wear and tear) *High level of accuracy in reproducing very small particulars *High dimensional stability over time and non-deformability *Considerable resistance to high temperatures and to ageing *Excellent non-stick effect *Soft, stretchy, high tear resistance, *Will not shrink in service

RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured. RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .

RTV 2 ( Tin Cured ) Silicone Rubber RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured. RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .

Liquid silicone rubber nipple We are one of the leading organization engaged in trading, exporting and supplying excellent quality liquid silicone rubber nipple in mumbai, maharashtra, india, which are manufactured by using high grade material. These liquid silicone rubber nipple are widely appreciated by our clients which are situated all round the nation. High in demand, these liquid silicone rubber nipple are available at most reasonable prices. Manufacturer in silvassa | daman | vadodara | dubai | bahrain | mumbai | india Chemco | packaging made prefect | chemcogroup.Com

In addition cure, silicone rubber is used for food mold/crafts 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High-temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic

We provide all kinds of liquid silicone rubber,molding,casting,electronic potting,pad printing,foam rubber,silicone for dildo,medical,label,leather,injection etc. Hong Ye Silicone have 23 years experience in silicone research and producing! A little higher price,much better quality! Do not focus only on price if you don't want lose your faithful customer!

Liquid silicone rubberSpecifications mold liquid silicone rubber 1.favorable hardness 2.less than 2% shrinkage 3.catalyst: odorless Liquid silicone rubber Application: 1.Unsaturated polyester resins, epoxy resins, polyurethane resins. 2.Polyurethane elastomers. 3.Natural and synthetic waxes. 4.Plasters and cements. 5.Low-melting point 6.Imitation wood .....to be continued Liquid silicone rubber Mainly features: 1. Advantages - High fluidity 2. Shelf life:1.5 year 3. Excellent reproduction of details 4. we promise non-oily 5. Low linear shrinkage 6. catalyst: environmental,non smell 7. Good release properties with organic resins and gypsum Liquid silicone rubber Storage and precautions The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum

Usage of liquid rtv silicone rubber for sculpture molding Liquid rtv silicone rubber for sculpture molding is intended for making silicone rubber mold for resin crafts, candles, plastic toys, relieve furniture, architectural decoration, furniture decoration, sculpture and so on. Feature of liquid rtv silicone rubber for sculpture molding Liquid rtv silicone rubber for sculpture molding is flowing liquid with general hardness of 22-50 a ++p after curing with features: 1) low shrinkage 2) good operation 3) high tear and tensile strength 4) curing agent free 5) easy de-mold 6) high reproduction times 7) resistance to deformation and high-temperature, acid-alkali Operations of liquid rtv silicone rubber for sculpture molding If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed. 25kg/drum, 200kg/drum

Pigments are essentially coloured powders or Liquid, and are used to produce a full range of colours. We can say pigments are a primary material, to produce all types of paints and colouring material, Enamels, acrylics, pastels, chalks, Coloured pencils, oils textile prints , Inks, Rubbers, Plastics etc.