Measure normal parameter of power line: Vrms, irms, frequency Active power, reactive power, apparent power Phase angle between voltage and current Power factor Calibrate single phase meter; Measure harmonic of voltage and current; Measure waveform of voltage and current; Measure current transformer¡¡¥s ratio (option); Energy accumulation test; Built-in clock, record testing time exactly; Store, check and transmit the measured data; Connected to pc, reading recorded data and real-time measured data by pc; Alarm when the tested voltage and current over the testing range; Connected to portable printer (option).
Standard configuration Sight window*1, cable port(port diameter: 50mm)*1, shelves*2, chamber lamp*1, power cable *2m No fuse breaker, over pressure¡¢over heat and over current protection for compressor, Over temperature protection, over load protect of blower, dry heat protection A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door. Dehumidifier The rotation regenerating dehumidifier m-120 ensures precise control of low humidity (5¨¬c 5%rh) for electrostatic reliability tests. Temperature and humidity recorder -100 to +150¨¬c/0 to 100%rh 100mm with effective width 100mm and 2 pen Temperature 1 pen and humidity 1 pen. -100 to +150¨¬c/0 to 100%rh 100mm with effective width 100mm and 6 dots Temperature 3 dots and humidity 1 dot. -100 to +150¨¬c/0 to 100%rh 100mm with effective width 180mm and 12 dots Temperature 6 dots and humidity 6 dots.
Features: 1. Check the error of active and reactive of watt-hour meter at the same time, and meanwhile check the error of main and secondary meter in the same circuit. 2. Display the electrical constants such as: voltage, current, power, power factor, phase and frequency and etc. 3. Measure ct ratio, wave form display. 4. Measure 2-51 voltage and current harmonics. 5. Judge wrong wiring. 6. Measure the baud rate for multi-function energy meter and meter number reading. ¦ct secondary loading function. 8. Automatically correct the clamp error.
A) Capacity: 24,000 MT And Growing B) Equipment 8-Blocker Straight line machine with PLC control 4-Blocker straight line machine with PLC control Hi speed 40-table annealing furnace-12 m long Inverted vertical wire drawn machine All machines are available with an online clearing and coating facility. PRODUCT SPECIFICATIONS WIRE SIZE RANGE : 1.8 - 8 mm PHYSICAL ATTRIBUTES : Coil ID 300 - 700 mm Coil Weight - 25 - 850 kg FINISH : Bright material TOLERANCE : H9, H10, H11 SUPPLY CONDITION : Soft annealed ¼ hard ½ hard Spring hard Tensile standard / As per customer requirement GRADES : AISI: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016 Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420 *Specialised grades also available as per customer requirements
If you are planning to start a state-of-the-art gym, you should seriously consider providing your clients with a safe and reliable floor for their workouts. It would be dangerous to participate in strenuous exercises without the support of a sturdy floor with excellent cushioning properties. And what better way to enhance the floors safety than by installing rubber gym tiles from Hirange, one of Indias best rubber gym mats manufacturers Size : 100*100*15cm While exercising, strength and balance are needed to maintain a good position, and shock absorption is a must to avoid injuries. Our shield lock gym tiles, with their amazing cushioning abilities, will fully safeguard the joints and ligaments of your customers while exercising. Additionally, our rubber gym tiles will protect your gyms flooring since the equipment can be very heavy and can damage the flooring. 5 Amazing Benefits of Hiranges Shield Lock Gym Tiles Extremely Durable : Our Shield Lock Gym Tiles are made of the finest Indian rubber using cutting-edge equipment and technology. They are sturdy, have amazing tensile strength, and will last for extended periods in optimum condition. Easy to Clean : Since our mats are made of superior-quality rubber, which is an easy to clean material, you will not experience any difficulty in maintaining them. Clean them easily using a damp cloth to remove dirt or just shake off any dust or grime stuck to them. Simple Installation : Installing the gym tiles is as easy as interlocking a puzzle and is done quickly. Hence, you dont need the help of professionals or a guide to help install them at your gym. Shock Absorbing : Our tiles possess the essential shock-absorbing properties that help prevent injuries due to falls and high-impact exercises. They provide you with maximum comfort while performing high-intensity workouts like CrossFit training. Noise Reducing : Another feature you will adore is that our gym tiles reduce noise levels significantly. This is especially beneficial during activities like aerobic sessions or dancercise workouts that can be too loud for comfort. Top Reasons to Choose Highranges Shield Lock Gym Tiles Today, Highrange is recognized as one of Indias top rubber gym mats manufacturers because of the premium quality of our gym tiles that matches international standards
Product profile: 1) It is mainly used for tensile testing of various types of steel wire ropes, bolts, slings, anchor chains, rigging, shackles and other test samples. 2) Horizontal frame with frame structure and single-acting double-acting servo cylinder. 3)High-precision tension-loading load cell force measurement, photoelectric encoder measurement displacement. 4) Special bolting attachment for bolts (other fixtures can also be designed separately) for convenience and reliability. It can be selected according to different types and samples of different specifications. 5) Moving the beam can facilitate the adjustment of the test space. 6)The horizontal tensile testing machine adopts servo control technology and has closed-loop control loops such as test force and displacement, which can be loaded in stages. The microcomputer automatically collects data and performs data processing. The appearance of various different tonnage lyings from the factory:
Vannin Healthcare offers several effective COVID-19 tests: SGTi-flex COVID-19 IgM/IgG (25 tests per kit) STANDARD Q COVID-19 IgM/IgG Duo Test (40 tests per kit) Anti-SARS-CoV-2 Rapid Test (50 tests per kit) General Features Can detect and differentiate between IgM and IgG antibodies Convenient: no additional equipment necessary Extremely fast: results in 10-15 minutes Point-of-care testing Allow rapid decision-making in high-stakes situations Why our tests Certified: CE-IVD marked, FDA-cleared, ISO 13485, Korea GMP-certified Reliable: high clinical specificity and selectivity Easy to interpret Can detect antibodies even in asymptomatic patients Vannin Healthcare Global offers various diagnostic and serology tests for identifying the presence of Severe Acute Respiratory Syndrome Coronavirus2 (SARS-CoV-2). SARS-CoV-2 is the virus that causes COVID-19 which means that its presence could indicate that a person has been infected. There are two types of tests currently used to determine the presence of the virus: Molecular diagnostic tests or viral tests (Swab tests) Antibody serology tests (Blood tests) Vannin Healthcare Globalâ??s Serology Tests To find out whether antibodies are present in an obtained sample (whole blood, plasma, or serum), serology tests are used. The presence of antibodies could indicate a past infection. And depending on the type of the immunoglobulins present, it could also determine the approximate time when the infection occurred. After fighting a coronavirus, our bodies are likely to produce two classes of antibodies: IgM and IgG. In the case of SARS-CoV-2, both IgM and IgG are most likely to occur simultaneously within two to three weeks after a personâ??s been infected. For a firmer diagnosis, Vannin Healthcare Global offers serology tests that check for both IgM and IgG antibodies. Can detect and differentiate between IgM and IgG antibodies Differentiating between the antibodies is crucial when it comes to providing proper medical advice to your patients. The appearance of IgM antibodies is the initial response of the organism fighting to suppress the virus. These antibodies could indicate that the patient is still infectious, and advising patients to self-isolate is the appropriate course of action. IgG antibodies can be detected in the blood sample usually within7-10 days after the onset of infection. If a patient has IgG antibodies, and no IgM antibodies, they have developed a temporary immunity to COVID-19. No additional equipment necessary The test design makes it a perfect choice for remote areas without access to fully-equipped laboratories. Simply obtain a blood sample from a patient, and add 10�µl into the appropriate place on the testing cassette along with three drops (90�µl) of the buffer. The results will appear in 10-15 minutes. Point-of-care testing Being easy-to-interpret and fast, it is ideal for rapid decision-making in the ICU or during a consultation with a patient. In medical disaste
Application Auto tensile tester applies to plastic films, sheets, rubber, laminated films, extrusion films, foils, paper, medical patches, release paper, non-woven fabrics etc testing of various items, such as tensile, break force, elastic modulus, elongation, seal strength, t-style peeling strength, 90 peeling strength, 180 peeling strength, widely used in food & pharmaceutical industries, quality inspection departments as well as research and development institutions.
UN Certified Bulk Bags (UN Fibc bag) is designed specifically to fulfill the requirements set forth by the United Nations for transporting and storing hazardous materials. The UN bags are designed and tested by the recommendation as laid down in the â??United Nations Recommendations on the Transportation of Dangerous Goods (Orange Book)â??. To maintain international regulations for transport by road, rail, and sea, Devratan Enterprises designs and produces quality UN Bags with the help of an efficient and trained staff along with the latest advanced technical equipment Devratan Enterprises bags comply with all the requirements mentioned by the UN FIBC. Various tests that are decided by the UN include Top lift test, Righting test, Tear test, Drop test, and Stacking test. The UN Bags are first tested at our testing laboratories and further repeating the same in an independent testing facility to get it certified officially. To be classified as such, the bags must undergo rigorous testing methods. Our sales experts are highly knowledgeable when it comes to these requirements. We can in-depth analysis of your current specs and determine which type of UN-approved bulk bags are the best solution for you There are four types of FIBCs for dangerous goods made from woven plastics: 13 H 1 â?? Woven plastics without coating and without liner. 13 H 2 â?? Woven plastics, coated and without liner. 13 H 3 â?? Woven plastics, uncoated and with liner. 13 H 4 â?? Woven plastics, coated and with liner. UN IDENTIFICATION AND LABELING FOR FIBCs UN Bulk Bags have a unique labeling system designed to allow the user to track the origin, manufacturer, coating, materials, and other important factors of the individual bag. See below for an explanation of the labeling system
Features : Soft flow,Wood flour filled Phenolic Moulding Powder with good surface & mechanical and electrical properties,suitable for Injection Moulding & Transfer Moulding. Colour : Black Applications : Appliances Properties Test Method Typical Value Appearance - Black Apparent Density ISO 60 0.65 g/cm3 Specific Gravity ISO 183 1.40 Tensile Strength ISO 527-1/2 52 MPa Flexural Strength ISO 178 85 MPa Compressive Strength ISO 604 200 MPa Charpy Impact Strength(notched) ISO 179 1.80 KJ/m2 Deflection Temperature , 8 Mpa ISO 75 1300 C Surface Resistivity IEC 60093 1.00E+10.5 Ohm Volume Resistivity IEC 60093 1.00E+11.5Ohm.cm Di Electric Strength IEC 60243 8.00 Kv/mm Proof Tracking Index IEC 60112 130 V Water Absorption ISO 62 55 mg Shelf Life - 6 months
General Features Available sizes XS S M L XL Available colours white blue Packaging According to your requirements Nonsterile disposable Powderfree as per the FDAs 81FR 91722 Safety Features Fully CEcertified and FDAcleared In compliance with EN 455 EN 374 ASTM D6319 Latexfree manufacturing Extremely durable and puncture resistant Provides protection from most chemical exposure Provides protection against viruses and bacteria Comfort Features Ambidextrous design Rolled rim makes it easier to put them on and off Custom design for your comfort Hypoallergenic High chemical bacterial and viral resistance Another unique benefit of Nitrile examination gloves is their durability against a greater number of chemicals compared to latex and vinyl gloves They are the best choice if youre handling oils and solvents and are therefore commonly used in the food industry Because of their high resistance they have become the most preferred option in laboratories and various medical settings with a high risk of contamination Latexfree manufacturing Our Nitrile examination gloves are not made with natural rubber latex This makes them ideal for people suffering from Type I allergies since they are not likely to cause an allergic reaction Please note that you should take the latexfree claim of other suppliers with a grain of salt There are currently no tests to determine whether any gloves are 100 latexfree as noted by the FDA 100 compliant with regulations CE EN 455 EN 374 ASTM D6319 Here at Vannin Healthcare we have successfully implemented the ISO 90012015 standard Our disposable Nitrile gloves are in compliance with the regulations specified by the Medical Device Directive 9342EEC making them fully CEcertified The FDA has formally cleared our Nitrile gloves as valid PPE Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Available sizes Sizes XS S M L XL Length 2355 mm 2355 mm 2355 mm 2355 mm 2355 mm Palm width 755 mm 855 mm 955 mm 1105 mm 1205 mm Thumb length 522 mm 542 mm 572 mm 592 mm 652 mm Forefinger length 662 mm 682 mm 722 mm 742 mm 802 mm Middle finger length 772 mm 792 mm 822 mm 852 mm 922 mm Ring finger length 682 mm 712 mm 752 mm 772 mm 822 mm Little finger length 522 mm 542 mm 562 mm 602 mm 642 mm Physical Specifications Palm Thickness Min 005 mm Finger Thickness Min 005 mm Wrist Thickness Min 005 mm Tensile Strength Before Aging Min 14MPaAverage 18MPa Tensile Strength After Aging Min 14MPaAverage 16MPa Elongation Rate Before Aging Min 500Average 580 Elongation rate After Aging Min 400Average 470
General Hospital Gown Features Type: low-level hospital gown Gown usability: disposable Material type: CPE Colour: blue Packaging: 1 per bag Why Our Gowns Low-linting Made from a breathable CPE material Easy to use and lightweight, allowing optimal freedom of movement Strong seams for improved durability CPE Comfortable Protective Gowns In Stock Our non-surgical AAMI level 1 protection gowns come with a variety of comfort features that will make sure you donâ??t feel encumbered by their presence. Perfectly sized for ease of use, these medical gowns cover all critical zones, providing enough protection in minimum-risk situations where there a low chance of liquids coming into contact with the wearer. When it comes to CPE material, chlorinated polyethylene is an effective blood repellent that is also lightweight, durable and breathable.Specifically created to allow freedom of movement, our gowns come with strong seams and elastic knitted cuffs. Use of Sterile Disposable Non-Surgical Drapes The main difference between surgical and� non-surgical gowns� lies in the fact that non-surgical ones like ours are lightweight and provide <4.5g spray impact penetration. They are intended for basic hospital and clinic care, protecting the wearer from other influences, and other patients from microorganisms of the wearer. This low-level type of protective wear isnâ??t just reserved for medical personnel â?? you can also use coveralls for industrial operations, larger business organizations, and even for domestic use. Important Safety Features for Medical Gowns At Vannin Healthcare Global, we are proud to say that weâ??ve manufactured extremely durable and resistant gowns that passed both the hydrostatic pressure and impact penetration test. While ensuring uncompromising protection in all circumstances that comply with the levels of liquid barrier performance issued by the Association of the Advancement of Medical Instrumentation (AAMI), we have obtained both relevant CE certification and full FDA clearance. Our non-surgical PE gowns are in compliance with ISO 9001:2015 and ISO 13485:2016. Please note that these gowns have an EN 13795 certificate which is equivalent to low level AAMI hospital gowns. Medical Gown Performance Standards â?? Overview Tear Resistance ASTM D5587(woven) ASTM D5587 (non-woven) ASTM D1424 Tensile Strength ASTM D5034 ASTM D1682 / Seam Strength ASTM D751 Breathability (Water Vapour) ASTM F1868 Part B ASTM D6701 (non-woven) ASTM D737-75 Lint Generation ISO 9073 Part 10
Application: HV test shielding room (faraday cage) are Widely used in power cable, transformer, transformer switch, transformer substation and other High voltage levels of partial discharge test or impulse test. For HV testing shielding room, as a HV test place, it should has good electromagnetic shielding condition. And its electromagnetic compatibility always is of great importance. Firstly, it should restrict electromagnetic wave into inside shielding room caused by discharge when making HV test to weakening interfere to outside, especially on electronic and communication system. Secondly, it should prevent outer electromagnetic wave intruding into shielding room to cause measurement error of partial discharge and wireless. Thirdly, it should reduces open circuit voltage and closed current to restrain common-mode interference so that to avoid equipment damage and to improve accuracy of impulse measurement. For GIS HV test shielding room, design area is 500 m2ï¼?Length 25mã??Width 20m). From provided information , we find that steel structure have been completed already with one set of 20T crane indoor, crane supporting corbel also completed, the height is 17.9m from ground to upper part of corbel. Main door height 13m,width 10m, locates at downward of the west side, the door open direction towards to north . According to ILJIN drawing, three side of structure column has already, but western structure column still missing yet. however, as the main door will be located in this side, the western side also should have steel structure , and this structure position still should be unified considered with main door installation. We will be able to submit suggested design diagram with position & size of this structure column for reference. in order to save construction cost, the construction engineering will be carried out by ILJIN team.
Scratch Grinding Tester Automobile line inspection equipment Wire and Cable Detection Equipment It is applicable for assessing the scratch-resistant performance of automobile wire insulation with external forces in line with the requirements of GB/T12528-2008. Main parameters: 1. The scratch grinding device exercises in two directions along wire axes with a stroke above 10mm 2. Exercise frequency: 50~60 cycles/min 3. Minimum distance between test points and test point and test sample end: >10mm; rotation angle of test sample: 90° 4. Length of test sample: Test sample which is about 750mm is firmly fixed to a steel anvil 5. Weight: 400, 700, 1000g (weights applied to scratching needle) 6. Function: The device will stop when the scratching needle grinds through insulation and comes into contact with conductor
Resistance Test Instrument Supplier ZY9733 and ZY9734 digital desk type low current resistance measuring meters are suitable for units concerned to measure the DC resistance of various components and parts with certain limitations on current, such as platinum resistor, coppery thermal resistor, PTC ceramics, thermistor and various wire rods, etc. 1. Key features 1.1 It adopts a large green LED to display measured value, which is striking and clear. It also adopts the four-terminal resistance measurement method to eliminate the impact of conductor resistance, and the measurement accuracy is high. 1.2 There are a variety of specifications, and each specification has four scales to meet the measurement requirements of different users. 1.3 The test current is lower than similar equipment, which effectively prevents the impact of components and parts on resistance. 1.4 ZY9734 type has a RS-232 serial data output interface to facilitate the connection to computer. 1.5 It adopts a novel plastic shell and can changes the inclined angle between the device and table by adjusting the handle position, so as to determine the suitable panel observation angle. It has a well-designed appearance and is easy to use. 2. Main technical indicators Temperature: Reference conditions: 20±5; nominal condition: 5~35 Relative humidity: Reference conditions: 40~60%; nominal condition: 25%~75% Power source: AC 220V±10%, 50Hz, power consumption: About 5VA.
Sawdust Moisture Meter MS-W Sawdust moisture meter with seperate probe MS-W used for measuring moisture content of wood materials(such as sawdust,paillasse,bamboo powder and wood chips).It applicable of paper making , flakeboard , furniture and mechanism of charcoal industry. Features: * It is portable, compact, easy to use and the moisture measurement readings are instant. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * The moisture meter operation has automatic temperature compensation. * Data hold function. * Low battery alert. Specifications: Digits LCD with backlight Measuring range :0-84% Operating conditions: Temperature:0-60 Humidity:
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters.
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters.
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters.
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters. Packaing:59*78*183mm