Insulation Panels Suppliers and Manufacturers

Brown Sand Roll Earthy Yellow PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. Advantage: 1. Heat preservation and heat insulation: the metal carved board has excellent heat preservation and heat insulation performance, can greatly reduce the heating and cooling energy consumption, and save energy expenditure, compared with the traditional exterior wall heat preservation materials, the product cost performance is higher. 2. Fire and flame retardant: the surface of the board is made of a metal layer with special technology, and the inner core is made of hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment. The bottom layer is fireproof and moisture-proof fiber cloth, which makes triple protection more secure. 3. Waterproof and moisture-proof: Metal carved board has an excellent own structure and compact concave-convex bump plug between the board and groove type installation, it can avoid structural damage caused by rain, snow, freezing, melting, etc. It can eliminate the possibility of wall water seepage after installation. 4. Sound insulation and noise reduction: 5. Efficient construction: the installation method of the metal carved board is simple and fast, regardless of being limited by seasonal climate and geographical environment. It can obviously shorten the progress of the project, save the construction cost and reduce the overall cost. At the same time thermal insulation, minimizes the load on the exterior walls and increases the availability of space and land. 6. Environmental protection and durability: the metal carved board has a stable chemical and physical structure, it does not decompose and mildew, and it has no radiation and no pollution to our environment. It also can be flexible disassembly for reinstalled and reused, its scraps can also be recycled and reused, the construction waste will be reduced in the installation process, and easy to clean and durable. 7. Shock resistance and crack prevention: the metal carved board is light in weight, high in strength, and good in impact resistance. the advantages of light weight, not only reduce the burden of the building itself, but also greatly reduce the impact of the earthquake on the building. the board is installed in the lightweight steel structure of the building and has strong integrity, anti-knock and anti-crack, which performs strongly and is high in safety.

Length:customized Width: 1m, 0.96m Height50mm-200mm Standard export package:corrugated paper box to protect four corners of pu sandwich panel

Multicolor steels offer a wide variety of factory made, pre-fabricated insulated sandwich panels for myriad applications. We offer distinct type of panel configurations made on a fully automatic line with metal skin on both sides , ensures consistent cross-section, uniform dimensions and close tolerances.

Rockwool sandwich panel is made of rock wool as raw material. The upper and lower surfaces are made of galvanized color steel plate. According to customer's specific requirements, we can also use aluminum-zinc color plate or galvanized steel plate. The thickness of the steel plate is generally within 0.2-0.8mm, and the core material of the sandwich plate is made of high quality vertical silk rock wool with 120kg/m3 density. So that rock wool sandwich panels with good stiffness. Excellent absorption sound insulation Excellent fire performance: Rockwool core fire rating for the AI level. Buttoning a reasonable way: Rockwool roof panels with dark buckle connection, to avoid the roof joints leakage hazards, saving the amount of accessories. convenient/flexible installation;performance: flat board, seam tight, good stiffness, effectively prevent the generation of hot and cold bridge Sandwich panels are used in facades, partition walls and ceilings. The most typical applications include industrial, office and commercial buildings, sports halls, warehouses and power plants. The panels are also suitable for food industry construction and demanding clean room applications.

As a subsidiary of a Chinese state-run company. it offers the best quality & most competitive price.

Polyurethane screen panel is a kind of reticulated product produced with polyurethane as raw material, as long as it is used in mine mineral processing, classification, dehydration and other screening machines to replace metal sieve plate (net). Polyurethane screen panel is mainly used in coal mine, iron ore, copper ore, and other ore classification, screening, dehydration and other places, is one of the necessary accessories of vibrating screen. According to the screen holes, polyurethane screen panels are divided into slit, rectangular, circular and square screen panels. The friction coefficient between polyurethane and material is low, and because the service life of polyurethane screen panel is 3-5 times longer than that of stainless steel sieve plate, and the number of maintenance and replacement is less, it is the preferred choice in many industries. Polyurethane screen panel is wear-resistant, moisture-resistant, can work under the condition of water medium, has a long service life, and can avoid the adhesion of wet particles, which is more than 5 times that of ordinary rubber screen panel.

Insulated EPS panel, Metal insulated sandwich panels The KRS Insulated EPS Panel is a stressed skin sandwich panel, comprised of pre-painted steel skins continuously laminated over a fire retardant treated Expanded Polystyrene (EPS) core. The EPS core, whilst having a fire retardant additive is not fire rated. KRS Insulated EPS Panel can be used in horizontal or vertical applications and with a range of colour, joint and profile options, it can meet the functional and aesthetic requirements demanded by a variety of facilities such as Sports Centres, Commercial premises, Offices, Warehouse and Factories. KRS Insulated EPS Panel's range of colours, joints and profiles deliver a first class finish inside and out. The panels can be joined with a standard slip joint or a tongue and groove type joint. It allows for easy and rapid installation whilst providing greater strength in walls and a clean, smooth aesthetic look The KRS Insulated FR panel is a stressed skin sandwich panel, comprised of pre-painted steel skins continuously laminated over a Phenolic Polystyrene (PPS) composite foam known as Polyphen. KRS Insulated FR panel can be used in horizontal or vertical applications and with a range of colour, joint and profile options, it can meet the functional and aesthetic requirements demanded by a variety of facilities such as Sports Centres, Commercial premises, Offices, Warehouse and Factories.

Aerogel Blanket Specification HT200. Aerogel insulation blanket with Aluminium foil, similar to Cryogel Z ( mainly used for the cold insulation, such as LNG, Working temperature from -190�ºC-200�ºC ), the thermal conductivity from 0.017-0.023� W/m.k Description: HT200 series aerogel blanket is a kind of flexible, low-temperature, and high-efficiency cold-proof felt. This material combines nano-aerogel with special fiber to produce flexible, ultra-low thermal conductivity, high-efficiency thermal insulation felt, suitable for liquid nitrogen, LNG, and other low-temperature industrial pipes, tanks, and equipment cold-proof and heat-insulating. HT200 series aerogel blanket are the best products in cold insulation materials and are ideal for customers to pursue better low-temperature cooling effects and lower energy consumption. HT200. Aerogel insulation blanket with Aluminium foil, similar to Cryogel Z ( mainly used for the cold insulation, such as LNG, Working temperature from -190�ºC-200�ºC ), the thermal conductivity from 0.017-0.023� W/m.k Application advantages of HT200 Aerogel Blanket for Heat Thermal Insulation 1. Superior Insulation Performance 2~5 times better than traditional insulation products with longer service life 2. Reduced Insulation Thickness For the same insulation performance, just take a portion of the thickness of traditional material 3. Hydrophobicity and Fire-proof Repel water from penetrating into pipes, equipment, A1 rating of fire-proof 4. Easy Handling Lightweight, easily cut and sewn to fit different shapes of pipes and equipment, Less labor for installation 5. Transportation Costs Savings Lower packing volume and lower weight can greatly cut down logistics costs Model HT200 Color Maroon, White, Grey, Black Thickness 3mm / 5mm / 6mm / 10 mm Roll Size 10mm: Width 1500mm x 30m 6mm: Width 1500mm x 38m 5mm: Width 1500mm x 42m 3mm: Width 1500mm x 45m Hydrophobic Yes Use of Temperature -200�ºC - 200�ºC 25�ºC Thermal Conductivity W/(m�·K) 0.017 ~0.023 W/(m�·K) OEM Yes ODM Yes, cut into sheet, round, composite with 3M Brand adhesive, etc.

Aluminu foil air bubble insulation, pe insulation, thermal break insulation, heat radiant barriers.Logistic services

Aerogel blankets.