BTA Na can be absorbed on metal surface and form a thin film to protect copper and other metals. BTA Na can be used together with many scale inhibitors and fungi disinfectants in circulating cool water system, and it has good corrosion inhibition effect in circulating cool water system. The dosage of 2-4mg/l is preferred. BTAâ?¢Na can also be used as anti-discolor agent, coating additive and luboil additive.
Widely used in dimer acid, alkyd resin, synthetic fiber nylon 8 and 9, plastic plasticizer, printing ink, pesticide emulsifier, textile printing and dyeing auxiliaries, industrial solvents, detergents, metallic minerals flotation agent, remover, can also be used to make emulsified oil, metal processing oil, rust-proof oil, paint, oil is copy paper, pen, touch typing paper, detergent, laundry soap, softening agent, daily chemical and other industries.
Product Introduction:
Lauric Acid is used in many applications, including: anionic and nonionic surfactants, and raw material for emulsifiers. Used in the rubber industry as an activator/accelerator/ plasticizer and softener.
Widely used in pharmaceuticals, surfactants, soaps, detergents, cosmetics, daily chemicals.
Product Functions&Applications:
1. Lauric Acid mainly used in the production of alkyd resin, wetting agent, detergent, pesticides, surfactants, food additives and cosmetics raw materials.
2. Lauric Acid used as a surface treatment agent for the preparation of adhesive. It is also used in the manufacture of alkyd resin, chemical fiber oil, pesticides, synthetic spices, plastic stabilizer, gasoline and lubricating oil.
3. Lauric Acid is the raw material for producing soap, detergent, cosmetics, surfactants and chemical fiber oil.
Defoamer
A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break a foam already formed.
The defoaming agent is resistant to high temperatures, light in color, has good water dispersibility, is not prone to fish eyes and shrinkage cavities, and has no oil slicks or demulsification. It is suitable for all types of coatings and emulsions, water-based resins, and adhesive systems.
Stearic acid, also known as octadecanoic acid, produced by oil hydrolysis, mainly for the production of stearate. Each gram is dissolved in 21ml ethanol, 5ml benzene.
Stearic acid are widely used as the basic raw materials of surfactants. Used as lubricant and stabilizer in plastics industry; Softener and fungicide in textile industry and household detergents; It is used as wax model in precision casting and soap base in grease industry.
Application:
1. Mainly used to produce stearate
2. Widely used in making cosmetics and other organic chemicals.
3. Solvent for oil-soluble pigment, crayon slip agent, wax paper polish, emulsifier for glyceryl stearate, etc.
4. Food industry additives, raw materials for daily chemical products.
5. Manufacture of PVC plastic pipes, plates, profiles, and films.
Name: Triethanolamine
CAS: 102-71-6
Chemical formula: C6H15NO3
Appearance: colorless liquid
Triethanolamine is a colorless oily liquid with mild odor, easy to absorb water, exposed to air and turning brown under light. At low temperatures, it becomes a colorless or light yellow cubic crystal system.
Application:
1. As a compliant lubricant, it can eliminate friction between metals and help improve the viscosity and solubility of lubricating oil.
2. As a surfactant, it is often used in household cleaning and personal care products such as detergents, cleaners, softeners, etc.
3. As a preservative, stabilizer, and co solvent, it can be used in cosmetics, and food processing.
4. As an oil in water emulsifier, it can be used to prepare various skin lotion and cosmetics.
Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96
Applicationï¼?
1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent.
2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent.
3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry.
4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.
Lanolinis a kind of secreted oil attached to wool. the main component is esters produced by sterols, fatty alcohols and triterpene alcohols and approximately the same amount of fatty acids, accounting for about 95%, and it also contains free alcohol 4 %, and a small amount of free fatty acids and hydrocarbons.
Application:
1. Industrial. It is used to prepare high-grade anti-rust oil, low temperature lubricant, printing ink, fiber oil, leather fatliquor, plastic plasticizer, latex defoamer, etc.
2. It is used to prepare rheumatism ointment, zinc oxide adhesive plaster and ointment base material in medicine.
3. Cosmetic grade lanolin can be used for cold cream, anti-wrinkle cream, anti-cracking cream, shampoo, conditioner, hair cream, lipstick and high-grade soap. Often used as a water-in-oil emulsifier, it is an excellent moisturizing substance. It can soften and restore dry or rough skin due to lack of natural moisture.
Package and Storage:
â?¢ 50kg/drum
â?¢ Store in a dark, sealed, ventilated, low-temperature, dry and cool place.
Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures.
Key Features:
Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction.
Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation.
Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces.
Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads.
Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure.
Applications:
Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways.
Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads.
Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots.
Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture.
Specifications:
Penetration at 25 C: 60-70 dmm
Softening Point: 49-56 C
Flash Point: Minimum 232 C
Ductility at 25 C: Minimum 100 cm
Solubility in Trichloroethylene: Minimum 99.0%
Specific Gravity: 1.01-1.06
Packaging: Available in drums, bulk containers, or as per customer requirements.
Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications.
Why Choose Bitumen Grade 60/70?
Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability.
Versatile Applications: Suitable for a wide range of paving and waterproofing projects.
High Quality: Manufactured under stringent quality control measures to meet global standards.
Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures.
Key Features:
Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction.
Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation.
Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces.
Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads.
Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure.
Applications:
Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways.
Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads.
Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots.
Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture.
Specifications:
Penetration at 25C: 60-70 dmm
Softening Point: 49-56C
Flash Point: Minimum 232C
Ductility at 25C: Minimum 100 cm
Solubility in Trichloroethylene: Minimum 99.0%
Specific Gravity: 1.01-1.06
Packaging: Available in drums, bulk containers, or as per customer requirements.
Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications.
Why Choose Bitumen Grade 60/70?
Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability.
Versatile Applications: Suitable for a wide range of paving and waterproofing projects.
High Quality: Manufactured under stringent quality control measures to meet global standards.
Separated by the melting point, the paraffin wax is usually at 2 C, as in us: 54-56 C, 56-58 C, 58-60 C, 60-62 C, 64-66 C.
All types of wax products must withstand cold well for paraffin wax, which means that it does not melt or soften and does not deform at a specific temperature. Depending on the conditions of use, locations and seasons of use, as well as differences in the method of use, commercial paraffin wax is required for a series of different melting levels.
Separated by oil knowledge, it can often be divided into: Fully refined paraffin, Semi-refined paraffin, and Crude wax. In addition, paraffin wax needs to be heat resistant, oil resistant and light resistant, otherwise the color will turn yellow after application. Excessive oil exposure impairs the color and stability of the paraffin wax, and also reduces its hardness. The main factors that affect the stability of paraffin wax are its non-hydrocarbon compounds and the low concentration of hydrocarbons.
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
Specification Application
EL-10 EL12 EL-20 HEL-20
1. Soluble in most organic solvents, dispersed in water, with excellent emulsification and diffusion properties.
2. In the textile industry, it is mainly used as a spinning oil for synthetic fibers such as polyester, polyacrylonitrile, and polyvinyl alcohol. It has emulsifying and anti-static effects, making the sizing soft and smooth, and reducing breakage; It can be used as a softening and smoothing agent in chemical fiber size, and can eliminate foam in synthetic size solution; HEL-20 also has the characteristic of low coking at high temperatures.
3. In the pharmaceutical industry, it is used as an emulsifier in the manufacturing of liniments, creams, emulsions, etc.
4. It can be used as pesticide emulsifier, lotion polymerization emulsifier, and used to prepare water-soluble metal cutting fluid and household washing products.
EL-30
EL-40
HEL-40 1. Easily soluble in water, fatty acids, or other organic solvents, with excellent emulsification performance
2. Used as emulsifiers in the ink and pharmaceutical industries.
3. It can be used as an emulsifier for organic phosphorus pesticides.
4. Used as an o/w type emulsifier for emulsification of various planting, animal, and mineral oils.
5. EL-40 is used as a component of wool, wool oil and chemical fiber oil in the textile industry, which has both emulsifying effect and antistatic effect. It can be better mixed with other antistatic agent, and can also be used to prepare size to eliminate foam in synthetic size. EL-40 has excellent diffusion and protective colloid properties, and is used as a monomer in the wool spinning industry for blending with wool oil. It is easy to wash off and has good hard water resistance.
6. Used as a dehydrating agent for oil field raw oil.
7. Used in the metal processing industry to prepare water-soluble metal cutting fluids.
8. HEL-40 can be used as a pharmaceutical grade solvent.
EL-60 1. This product is an o/w emulsifier.
2. It can be used as a chemical fiber oiling agent and a component of petroleum.
3. Pesticide emulsifier.
4. Petroleum dehydration demulsifier.
5. Ink, printing paste emulsifier.
6. Various planting, animal, and mineral oil emulsifiers.
7. Used as an emulsifier, fat enhancer, and emollient in the cosmetics and pharmaceutical industries.
8. It is used to manufacture shampoo foam bath liquid, skin care products, pharmaceuticals, etc.
9. Used in the metal processing industry to prepare metal cutting fluids.
EL-80
EL-90
The term bitumen refers to a substance produced through the distillation of crude oil Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry notably for roads and highways The two Bitumen grades are 6070 and 80100 The difference between 6070 and 80100 penetration grade is the penetration range Bitumen 6070 has lower penetration which means it is harder than bitumen 80100 Bitumen 6070 is better suited for use in hot climates and can withstand heavy traffic loads unlike bitumen 80100 According to the ASTM D36 method the softening point of bitumen 6070 is between 49 to 56C and the flash point of bitumen 6070 is 250 C Another important factor is density Due to the ASTM D70 the density of bitumen 6070 is equal to 10344 Bitumen Penetration Grade 85100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses
PHYSICAL PROPERTIES
Properties BC-SR Conc BC-VX Conc BC-PL Series BC-HTR Series
Specific Gravity 1.38 1.35 1.38 1.2
Average Particle Size,Microns 4 - 6 3 - 4 15 5 - 6
Softening Point Deg.C 155 - 165 130 - 140 90 - 110 125 - 135
Decomposition Point Deg.C > 200 > 200 > 290 > 300
Heat Stability Deg.C - - 240 270 - 290
Solvent Resistance Very Good Poor -
APPLICATIONS
Paper Coating Water Base R R
Solvent Base R
Textile Printing R R
Dyeing R
Paints/Inks Water Base R M
Solvent Base R
Plastics M R R
PVC Plastisols R M
Wax
Candles &
R M
Modeling Wax
Clay Colouring R R
Miscellaneous Art & Craft R R
Banners R R
R = Recommended M = May Be Used (After Trial)
BC-SR Conc. Series : Thermosetting type of high strength pigments with fine particle size,used for Solvent/Water
Based Paints,Inks,Papercoating,Textile,Plastisols,Crayons,Plastics etc. Applications.
Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R),Red Orange,R.Red,Pink(B), Pink(M),Pink(S),Magenta(S),
Magenta(R), Magenta(B),Violet(B),Violet(R),Royal Blue,Peacock Blue
BC-VX Conc.Series : Brillaint,high strength series with very fine particle size used for Textile-Printing, Oil/Water
Based Paints/Papercoating etc. applications.
Shades : Saturn Yellow,Brilliant Yellow,Z.Yellow,Bright Yellow,Geneva Green,Glow Green, Glow Green(S),Deep
Green,Jet Green,Golden Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R), Orange(S),Red Orange,R.Red,
Rich Orange(Y), Rich Orange(R),Arch Chrome,Pink(B),Pink(M),Pink(S),Magenta(S),Magenta(R), Magenta(B),
Violet(B),Violet(R),Royal Blue, Peacock Blue
BC-PL Series : Thermoplastic polyester based,formaldehyde free,high strength colours,with good heat resistance
which melt blend in plastics.These are Fluorescent Pigments specially made for Plastics Application
(Execpt PVC calendering).
Shades :Brilliant Yellow,Lemon Yellow,Green,Glow Green,Brill Green,Deep Green,Golden Yellow(Y), Golden
Yellow(R), Orange(R),Orange(3R),Orange(4R),Orange(Y),Red Orange,Fire Orange,Red,Pink(B),Pink(2B),Pink(3B),
Pink(4B), Pink(2R), Pink(R),Magenta(R),Magenta(S),Magenta(B),Blue,Royal Blue,Violet
BC-HTR Series : Thermoplastic polyamide based,formaldehyde free,premium high strength colours,
with excellent heat resistance,brillance & low mould plateout which meltblend in Plastics.
Shades : Lemon Yellow,Green,Golden Yellow,Orange(Y),Orange(R),Red Orange,Red,Pink(R), Pink(B),Magenta
CAS No.:63148-62-9
Other Names:pdms
MF:(CH3)3SiO[(CH3)2SiO]nSi(CH3)3
EINECS No.:63148-62-9
Purity:99.9%
Place of Origin:Anhui, China
Type:silicone oil, Chemical polymer
Usage:Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Petroleum Additives, Surfactants, Water Treatment Chemicals
Brand Name:ZINCA
Model Number:ZINCA-z201
Product name:Polydimethylsiloxane
Viscosity:50 100 350 1000 cst
Apperance:Clear colorless liquid
Keywords:Dimethicone
Application:Cosmetics,hair, polish,lubricant, molding release etc.
Sample:Availabe
Storage:Cool and dry place
Indulge in the ultimate luxury which only the finest caviar can provide. Our exquisite caviar is the epitome of quality and taste. Hand-selected and expertly crafted, our caviar will elevate any dish to new heights. Explore our selection and experience the beauty of the shimmering pearls.
As a caviar wholesaler with an own breeding program, we are able to reliably offer you a large selection of different caviar types in various quality classes.
Our brands are packaged privately based on the customersâ?? demand throughout the year. Our mission is to fully understand the client. We have all kinds of dates such as:
Thermowood is a type of modified wood that undergoes a thermal modification process, resulting in improved durability and stability. It is produced using Finnish technology, which has gained international recognition for its quality and craftsmanship.
Wood Plastic Composites (WPCs) are composite materials made of wood fiber or wood flour and thermoplastics such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), or polylactic acid (PLA).� They can also contain other ligno-cellulosic and/or inorganic filler materials.
WPCs are crucial and potential engineering wood products that have been extensively employed in the fields of landscape, transportation, municipal engineering, and building construction.� They have gradually been used to replace conventional wood-based composites.� WPCs are mainly produced by the thermoplastic polymers and the biomass particles and fibers from forestry and agricultural wastes (wood, bamboo, straw, stalk, husk, and bast).
The WC line of wood-plastic composites combines the pleasing look of wood with the functionality and manufacturing ease of plastics.� These composites blend fine wood particles with renewable, biodegradable, reclaimed, recycled, or virgin plastic materials to make firm, smooth pellets for convenient handling and further processing.� The wood fibers are obtained from waste materials generated by lumber manufacturers, which are then processed to produce a consistent reinforcing product.
