Glycol Ether Acetate Suppliers and Manufacturers

With over 2000 farmers covering 5 regions in Karnataka, we cultivate and process gherkins, chillies, capsicums, carrots, cauliflower and celery from our FSC 22000 processing plant in India. Setup by hands-on industry experts with an average of almost 20 years experience each,we have systems and practices in place to ensure our contract farmers achieve the highest yields and our products meet the highest standards expected by our clients. With the future in mind, all farmers are taught to follow sustainable agricultural practices. We have implemented practical and scientific post-harvest techniques to ensure that freshness is retained till we pack into barrels. Our team of qualified field staff, personally monitor all farmers, visiting each twice a week, providing invaluable ongoing support and guidance, which greatly contributes to greater yields and the overall quality of our produce.

Product Name: 1,2-Pentanediol INCI Name: PENTYLENE GLYCOL Molecular Formula: C5H12O2 Molecular Weight: 104.15 Appearance: Clear colorless to light yellow liquid Purity: 99% CAS NO.: 5343-92-0 EINECS No.: 226-285-3 Supplier: ZHENYIBIO 1,2-Pentanediol is used in synthesizing quinoxalines from biomass-derived glycols. Also used in the synthesis of propiconazole (P770100) a fungicide as well as other antifungals.

Product Name: 1,2-Octanediol INCI Name: CAPRYLYL GLYCOL Molecular Formula: C8H18O2 Molecular Weight: 146.23 Appearance: Colorless to white Solid Purity: 99% CAS NO.: 1117-86-8 EINECS No.: 214-254-7 Supplier: ZHENYIBIO caprylyl glycol (1,2-Octanediol) is an emollient with moisturizing properties that may also be used as a cosmetic stabilizer. When found in combination with phenoxyethanol these two ingredients work together as an anti-microbial.

Product Name: 1,2-Propanediol INCI Name: PROPYLENE GLYCOL Molecular Formula: C3H8O2 Molecular Weight: 76.09 Appearance: Viscous Liquid Purity: 99% CAS NO.: 57-55-6 EINECS No.: 200-338-0 Supplier: ZHENYIBIO Propylene glycol is used for similar applications as other glycols. Propylene glycol is an important raw material for unsaturated polyester, epoxy resin, and polyurethane resin. The use amount in this area accounts for about 45% of the total consumption of propylene glycol. Such unsaturated polyester is used extensively for reinforced plastics and surface coatings.

Product Name: Vanillyl butyl ether INCI Name: VANILLYL BUTYL ETHER Molecular Formula: C12H18O3 Molecular Weight: 210.27 Appearance: Light Yellow or colorless Liquid Purity: 99% CAS Number: 82654-98-6 EINECS number: 209-753-1 Supplier: ZhenYiBio Vanillyl butyl ether VBE is an oil-soluble warming agent. It can induce an enduring and gentle warming sensation on our skin and increase its temperature which speeds up the burning of the subcutaneous fat and makes the body slim.As it is very stable and nontoxic, VBE has become a good additive to the modern functional body-slimming.

Calcium Acetate Monohydrate, E263, CAS no. 5743-26-0, calcium salt of acetic acid, s a white, odorless, and tasteless crystalline powder. Also known as Calcium acetate, manufacturing process via chemical synthesis, calcium carbonate and acetic acid as raw materials. Calcium Acetate Monohydrate is mainly used in the production of candy products, desserts, and baked good (bread, cakes, pastries). As an experienced Calcium Acetate Monohydrate manufacturer and supplier, we has been supplying and exporting Calcium Acetate Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Calcium Acetate powder Specification Product Calcium Acetate CAS anhydride :62-54-4; monohydrate :5743-26-0 INS 263 EINECS 200-540-9 EEC E263 Structure Molecular formula 1.Anhydrous:Ca(C2H3O2)2 2.Hydrates:C4H6CaO4H2O 3.C4H6CaO4xH2O(x

Sodium Acetate E262, CAS no.127-09-3, is a sodium salt of acetic acid, available as a white powder. Sodium Acetate Anhydrous is widely used as a preservative and flavor enhancer in food processing. Sodium acetate may be added to food as a seasoning, sometimes in the form of sodium diacetate, a one-to-one complex of sodium acetate and acetic acid. As an experienced Sodium Acetate manufacturer and supplier, we has been supplying and exporting Sodium Acetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Acetate Specification ITEM STANDARD Appearance White, odorless, hygroscopic powder Assay (Dry Basis, %) 99.0-101.0 pH (1% Solution, 25) 8.0- 9.5 Loss on Drying (120, 4 Hours, %) 1.0 Insoluble Matter (%) 0.05 Alkalinity (as NaOH, %) 0.2 Chlorides (Cl, %) 0.035 Formic acid, formates and other oxidizable (as formic acid) 1,000 mg/kg Phosphate (PO4) 10 mg/ kg Sulphate (SO4) 50 mg/ kg Iron (Fe) 10 mg/ kg Arsenic (As) 3 mg/ kg Lead (Pb) 5 mg/ kg Mercury 1 mg/ kg Heavy Metal (as Pb) 10 mg/ kg Potassium Salt (%) 0.025

Sodium Acetate Trihydrate, E262, CAS no.6131-90-4, sodium salt of acetic acid, available as white to colorless crystals. Sodium Acetate Trihydrate is a common form of Sodium Acetate. With a similar function to Sodium Acetate Anhydrous, Sodium Acetate Trihydrate is also widely used as a preservative. Moreover, Sodium Acetate Trihydrate is an important intermediate in the manufacturing of Sodium Diacetate. As an experienced Sodium Acetate Trihydrate manufacturer and supplier, we has been supplying and exporting Sodium Acetate Trihydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Acetate Trihydrate Specification ITEM STANDARD Appearance Colorless crystals, slight acetic acid odor Assay (dry basis, %) 99.0-101.0 pH (5% Solution, 25) 7.5- 9.0 Loss on Drying (120 4h, %) 36.0 41.0 Insoluble Matter (%) 0.05 Chlorides (Cl, %) 0.035 Alkalinity (as Na2CO3, %) 0.05 Phosphate (PO4) 10 mg/kg Sulphate (SO4) 50 mg/kg Iron (Fe) 10 mg/kg Arsenic (As) 3 mg/kg Lead (Pb) 5 mg/kg Mercury (Hg) 1 mg/kg Heavy Metal (as Pb) 10 mg/kg

Glacial Acetic Acid E260, CAS No.64-19-7, a clear and transparent liquid used as preservative and flavoring enhancer in food production. Glacial Acetic Acid is an organic compound with the chemical formula CH3COOH. It has an assay of approximately 99.5% and is often used as table vinegar. It is also used directly as a condiment, and in the pickling of vegetables and other foods. As an experienced Glacial Acetic Acid manufacturer and supplier, we has been supplying and exporting Glacial Acetic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Glacial Acetic Acid Specification ITEM STANDARD Appearance Clear and transparent liquid Odor Pungent, vinegar-like, sour (strong) Assay 99.5% Evaporation Residue 0.005% Chlorides (Cl) 4 ppm Cobalt (Co) 0.1 ppm Sulphate (SO4) 19 ppm Iron (Fe) 0.5 ppm Lead (Pb) 0.5 ppm Titanium (Ti) 0.1 ppm Copper (Cu) 0.1 ppm Non-volatiles (%) 0.01 ppm Specific Gravity (20) 1.05- 1.10

Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers

Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.

Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container

Natural Gypsum: Gypsum (CaSO4.2H2O) is a naturally occurring mineral mined from deposits formed by ancient sea beds as a raw material, white when pure, but commonly grey, yellow, red or brown, owing to impurities. The anhydrous form (CaSO4), anhydrite, is common. We are enlisted amongst the topmost INatural Gypsum Importers and Exporters from India. Applications: Gypsum has many industrial applications in its raw or Calcined forms, especially in the building and construction industries. Uses of Raw Gypsum are principally as: - a retarder for Portland cement - a fertilizer or soil conditioner - mineral filler - oxidizing agent in glass manufacture or other industrial applications. Most gypsum is calcined and used in the manufacturing of plaster products. Wallboard and plaster requires gypsum contents greater than 85%, although producers prefer a minimum of 94–95% along with whiteness in color. The major consumers of the Gypsum at present are Cement Industry. By weight about 4% to 6% Gypsum in crushed condition is utilized in Portland Cement Manufacture after mixing with cement/clinker. Gypsum acts as a retarder and controls the setting time of cement. Imported Gypsum from Iran: Natural Gypsum is one of the most superior qualities and consistent material available for Import and Export. Natural Gypsum has adequate whiteness, high purity as well as it is low in cost which makes it absolutely feasible for white cements as well as Plaster Of Paris manufacturing and for the Cement Industry all together. One more important quality that distinguishes Natural Gypsum from others is its hardness which is less as compared to other sources and allows different industries to easily grind the same for processing into final product which in turn results in to reduced power consumption for manufacturing industries.

Quartz: Quartz is one of the most well-known minerals on the earth with numerous uses. Sand, which is composed of tiny Quartz pebbles, is the primary ingredient for the manufacture of glass. We feel pride in introducing ourselves as a leading Quartz Lumps Exporters from India. Mineral-grade packaging is provided for safe and easy delivery of Quartz Lumps. We welcome orders from Middle East, East Asian and several other countries and ensure timely shipment. Applications : It is used as an abrasive for sandblasting, grinding glass and cutting of soft stones. Quartz powder is also used in ceramic tiles along with feldspar.

Kaolin: Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries. Applications: Paper: Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties. Concrete: Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete. Plastics : Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure. Agriculture : It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant. Rubber : It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application. Paint : Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product. Ceramic : Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.

Ball Clay: A member of kaolinite family, Ball Clay is renowned for its plasticity and green strength. They consists varying proportions of kaolinite, mica and quartz, with small amounts of organic matter and other minerals, and are commercially values because they increase the workability and strength of various ceramic bodies and have white or near white firing characteristics. Ball clay is processed to minimize the levels of coarse particles. This enhances better workability and higher strength. Applications : It forms a major part of many ceramic applications, including sanitary ware, tiles, table wares and to an increasing extent non-ceramic applications like functional fillers and advanced application for example technical ceramics.

Potash Feldspar: We have come up as a dependable firm bringing forth Potash Feldspar all over the world. Based in India, we are exporting Potash Feldspar in varied quantity packs. Potash Feldspar are processed and are used for varied industrial applications. Further, we keeping in mind the budget constraints in mind, we offer Potash Feldspar at the market leading prices. About Feldspar: Feldspar is non-plastic Potassium or Sodium Alumino silicate mineral represented as KAlSi38or NaAlSi38. Feldspar is used generally for the following purposes : Ceramic Manufacturing formulations : In making the body composition of several types of ceramics and in preparation of glazes and enamel, Glass Manufacturing and Abrasive Manufacturing. It is used along with Ball Clay, Kaolin and quartz for tiles and sanitary Wares manufacturing. The presence of iron even in small quantity tends to impart coloration.

Bentonite: Buyers can contact us for availing Bentonite, used for the carrier application of liquid Pesticides and Micro-nutrients. Bentonite Blank Granules are coated with biologically derived ingredients, which are resistant to harmful effects of Ultra-violet radiations of sunlight, become active when they get favorable tropical conditions. Bentonite activate the microbial life within the soil and encourages soil microbes to play an active role. Bentonite loosens light soil enhancing thereby its water retention capacity and increase the efficiency of fertilizer. Bentonite turn saline soil into neutral and helps to increase the dark color of the leaves enhancing thereby Photosynthesis process which ultimately increase the yield of the crops. We, being a reputed Bentonite Exporter ensure standard packaging and systematic delivery of Bentonite. Applications: - Bentonite Blank Granules plays very important role in the Pesticides Formulations. - It acts as carrier for various liquid pesticides and the easiest and safest way of pesticides applications. During application, granules are less subject to drift than in the case with dusting and spray. - It can be applied even in condition of wind.

Bleaching Earth: We are a reliable industrial source for availing Bleaching Earth . Bleaching Earths have been used in the refinement of edible oils and fats since the end of the 19th century. Naturally-active Bleaching Earth has been used under the name of Fuller’s Earth since about 1880. Bentonite can be transformed into highly active Bleaching Earths by treatment with acid. We source Bleaching Earth from one of the leading producers, with manufacturing capacities in India, Malaysia, and Belgium. They use the unique filter less technology to produce superior and efficient Bleaching Earth for the Edible Oil Industry. Major Applications: - Purification of Edible oil : Soya Bean Oil, Cotton Seed Oil, Palm Oil, Rapseed Oil, Sunflower Oil, Safflower Oil, Rice Bran Oil, Corn Oil, Canola Oil, Olive Oil, Seasame Oil - Non edible oils : Fish oil, lard oil, Fish wax, and Waste oil / used oil, Aluminum rolling oil, Waste edible oil, Biofuel etc. - Used as Clay Catalyst in petroleum fractionating - Wax refining : Paraffin Wax, Vegetable Wax, Fish wax, Petroleum Jelly.