Electric Submersible Pumps Suppliers and Manufacturers

Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,

Electric motors, submersible pump sets and monoblock pump sets.

Electric fire pump is a kind of water supply device widely used in hospitals, shopping malls, office buildings and residential buildings in the middle and high-rise buildings, when an accidental fire, start the fire pump can ensure that the water pressure in the pipe network to meet the requirements of the fire extinguishing device, so that the fire is timely put out. In China, the fixed electric fire pump water supply system generally adopts the mode of one (or more) main pump with one (or more) standby pump, and is equipped with a special control cabinet to achieve the control of the fire pump.

Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity. Nominal outlet diameter: 350-3200mm Head: 0-10m Flow rate: 0.4-25 m3/s Power:22-1500kw Voltage: 380v, 660v 3kv, 6kv, 10kv Water conditions: Water temperature=50 deg.C Ph value: 4-10 Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.

Submersible water pump for evaporative air cooler Good quality long life According to your requirements

3.5inch submersible pump

Kirloskar Openwell Submersible Pump Range : Head : up to 64 metres. Capacity : up to 31 litres per second. Power Rating : 2.2 KW to 7.5 KW. (3.0 HP to 10.0 HP) Application : Submerged pump in Fountains, Wells, Sumps and Water tanks. Water supply for domestic use in high-rise Apartments, Buildings and Hotels. Gardening and sprinkler/conventional irrigation. Industries, for clear water handling. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Withstand wide voltage fluctuations * Designed to prevent overloading and hence motor burning. * Long life : due to replaceable wearing parts. * Dynamically balanced rotating parts. * Easy maintenance and spares availability. Special Features : * Voltage range from 200 v to 440v * Design for underwater applications * Water shower arrangement for out of water applications * No need for priming or foot valve for submerged application * Foundation, installation or pump-house not required Material of Construction : Standard Supply : Impeller : Cast Iron. Delivery casing : Cast Iron. Motor Body : Cast Iron. Shaft : Carbon Steel. Optional Supply : Impeller : Bronze Shaft : Stainless steel.

Submersible water pump Submersible water pump As a professional manufacturer from china since 1997, we have export our products to more than sixty countries and averagely deliver to more than thirty 20'gp containers per month. And with Good quality Excellent after-sales services Favorable price Powerful r&d ability, we believe we would achieve more. Characteristics: Suitable for lifting clean water not containing substances Easy use; Extremely reliable even when subjected to continuous use, since the motor is fully cooled.; Particularly suited for domestic use, to drain dirty water in all cases where suspended solids up to 20mm have to be dealt with; Applications situations: emptying of pools and tanks, disposal of domestic sewage, emptying of sump pits.

Submersible pump set 20 to 35 kg. 1 pies packing

Gas stove, kitchen appliances, crockery, chimneys, kitchen utensils, cooktops.

Please confirm more details we will sent you price list. 1. what the water pumps head and water capacity? 2. Any request about the borehole diameter. 3. How about voltage and frequency 380V or 220V,50HZ or 60HZ? 4.Whatâ?²s the temperature of water? 5. What the material, cast iron or stainless steel? SkySeaParticipate in the formulation of national standards for submersible pumps. FAQ & Contact us: Q1: Are you manufacturer or a trading company? A: We are the best manufacturer in submersible pump with a history of 70 years in China. Q2: What are your payment terms? A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. Q3: Can you do OEM? A: Yes, we can. Any OEM is welcome. Q4: How about MOQ? A: Usually, it is 5 PCS for each model. Q5: How about the delivery time? A: Usually, 20-30 days after receiving your L/C order. Q6: How about the warranty? A: 1 year. Why Choose US? 1. Specializing in manufacturing submersible pump products for 70 years. 2. The motor and pump body are self-produced on the whole line. 3. Each product is tested by 136 processes and strictly controlled by quality. Product Description: Submersible water pump for deep well has perfect design and resonable structure which has low noise and long lifetime, small volum, no water pollution. Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Product Advantage: 1. High efficiency and energy saving; Save and environmental friendly. 2. Strong and durable, stable and reliable. 3. Easy to use and widely application. Working Conditions (1) Three-phase AC power supply of rated frequency at 50HZ and rated voltage at 380±5%V.(user voltage at 660V shall be otherwise specified) (2) Pump inlet shall be kept below the dynamic level by 1 meter, but the submerged depth shall not exceed 70 meters below the static level. And the lower part of motor shall be kept at least 1 meter to the bottom of the well. (3) Generally, water temperature shall not be higher than 30. (4) Water quality requirements: a. Sand content in water not greater than 0.01%( weight ration) b.PH value between 6.5~8.5 c. Chlorine ion content not greater than 400mg/l

Please confirm more details we will sent you price list. 1. what the water pumps head and water capacity? 2. Any request about the borehole diameter. 3. How about voltage and frequency 380V or 220V,50HZ or 60HZ? 4.Whatâ?²s the temperature of water? 5. What the material, cast iron or stainless steel? SkySeaParticipate in the formulation of national standards for submersible pumps. FAQ & Contact us: Q1: Are you manufacturer or a trading company? A: We are the best manufacturer in submersible pump with a history of 70 years in China. Q2: What are your payment terms? A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. Q3: Can you do OEM? A: Yes, we can. Any OEM is welcome. Q4: How about MOQ? A: Usually, it is 5 PCS for each model. Q5: How about the delivery time? A: Usually, 20-30 days after receiving your L/C order. Q6: How about the warranty? A: 1 year. Why Choose US? 1. Specializing in manufacturing submersible pump products for 70 years. 2. The motor and pump body are self-produced on the whole line. 3. Each product is tested by 136 processes and strictly controlled by quality.

Please confirm more details we will sent you price list. 1. what the water pumps head and water capacity? 2. Any request about the borehole diameter. 3. How about voltage and frequency 380V or 220V,50HZ or 60HZ? 4.Whatâ?²s the temperature of water? 5. What the material, cast iron or stainless steel? SkySeaParticipate in the formulation of national standards for submersible pumps. FAQ & Contact us: Q1: Are you manufacturer or a trading company? A: We are the best manufacturer in submersible pump with a history of 70 years in China. Q2: What are your payment terms? A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. Q3: Can you do OEM? A: Yes, we can. Any OEM is welcome. Q4: How about MOQ? A: Usually, it is 5 PCS for each model. Q5: How about the delivery time? A: Usually, 20-30 days after receiving your L/C order. Q6: How about the warranty? A: 1 year. Why Choose US? 1. Specializing in manufacturing submersible pump products for 70 years. 2. The motor and pump body are self-produced on the whole line. 3. Each product is tested by 136 processes and strictly controlled by quality. Product Description: Submersible water pump for deep well has perfect design and resonable structure which has low noise and long lifetime, small volum, no water pollution. Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Product Advantage: 1. High efficiency and energy saving; Save and environmental friendly. 2. Strong and durable, stable and reliable. 3. Easy to use and widely application. Working Conditions (1) Three-phase AC power supply of rated frequency at 50HZ and rated voltage at 380±5%V.(user voltage at 660V shall be otherwise specified) (2) Pump inlet shall be kept below the dynamic level by 1 meter, but the submerged depth shall not exceed 70 meters below the static level. And the lower part of motor shall be kept at least 1 meter to the bottom of the well. (3) Generally, water temperature shall not be higher than 30. (4) Water quality requirements: a. Sand content in water not greater than 0.01%( weight ration) b.PH value between 6.5~8.5 c. Chlorine ion content not greater than 400mg/l