Flowrate:20-40L/min Pressure:6-8 bar Power:850W Suction tube diameter:51mm Pump tube length:1000MM Pump tube Material:SS316 Withstand temperature:100 degree. Suitable for viscosity:10thousand CPS to 100thousand CPS. Motor speed:0-900r/min Outlet:25mm Voltage:220V or 380V Suitable for pumping:Grease ;coating material; shampoo;resin;ethoxyline resin ;printing ink ;paint;cosmetics;flow food material and similar material.
Electric Explosion Proof Peristaltic Pump.Can be installed large flow pump head with maximum flowrate of 12000ml/min (single channel). A sharp explosion peristaltic pump can be mounted high flow pump head. Speed can be adjusted manually adjust the speed planetary CVT. Used in various environments, in particular, the requirement to use explosion-proof environments. Explosion-proof pumps are also used to move gasoline, diesel fuel, oil, ground water, potable water, salt water, wastewater, sewage, sludge, slurry and ash slurry, gas and air, powders, and rendering wastes, a variety of liquids, liquids with solids, etc.
Application: For high viscosity grease injection. Suitable for all kinds of power machine grease injection. Apply for injection 0-3#grease of engineering machine. Power supply: AC220V ;110VAC;24VDC or 12VDC. Barrel capacity: 20-30L Output capacity: 0.6L/Min Output pressure:
JET-M SERIES SELF-PRIMING PUMP JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure. Working conditions Max Temperature of Fluid up to+40 Max pressure:8bar. Max Ambient Temperature up to 40 Standard data and equipment: Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde. Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
QDX/QDX-A SERIES SUBMERSIBLE PUMP QDX/QDX-A submersibe pumps can be used for garden watering,oxygenating of cluster box or in supplying and draining water for ordinary places and characterized by corrosion resistance,small volume,light weight and convenient operation.It is fitted with multiple water-outlet pipes,and self-regulated according to the requirements of its lift and flow,and can deadlock(it is fitted with a floating switch,so it is possible to carry out the automatic control of start-stop action under no one care). The normal power standard is 220V/50Hz single phase, 220V/380V/50Hz three phase. Three phase230V/400V/50Hz/60Hz, singe phase uni-voltage 230V,240V,or 127V,110V,115V.Modes are available on request
Kirloskar end suction pumps type DB Range : Delivery size upto 150 mm Capacity upto 550 m3 / hr Heads upto 100 metres. Application : Suitable for Circulation of Water in Industries, Air-Conditioning Plant, Power Station, Mine Drainage, Lift Irigation, Sprinkler systems, Fire Fighting, Booster service, pumping brine, alkaline solutions, oils, benzene etc. for liquids having temperature in the range of -100 to 1000 C. Constructional Features : These are single stage, single suction, horizontal shaft type. They are made in accordance with DIN 24255. Models are available to operate at 1450 rpm and 2900 rpm at 50 hz and 1750 rpm and 3500 rpm at 60 hz. Material of Construction : Pump Casing and : C.I. / Bronze / Ph.Br. Casing Cover Impeller : C.I. / Bronze / Ph.Br. Shaft : Carbon Steel / St. Steel.
Kirloskar Horizontal Axially Split Casing Pumps type UP Thrubore Range : Delivery size upto 250 mm Capacity upto 950 m3/hr Heads upto 52 metres. Application : Suitable for handling water with slight impurities in Industries, Water Works, Storm Water, Irrigation, Sprinkler Irrigation, Fire-fighting, Air Conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Direct or gear drive. * Rotating assembly available for inspection or maintenance by removing only upper half casing without disturbing suction and delivery piping and motor. * Pump axis horizontal or vertical * Vertical pump, direct drive or with universal shaft arrangement * Highest reliability. Material of Construction : Casing half Upper/Lower - C.I.. / Bronze / SGI / Cast Steel / CF8M Impeller - C.I. / Bronze / Ph.Br. / Cast Steel / CF8M Shaft - Carbon Steel / ST. Steel Other materials on request.
KF-O/1/2 SERIES PERIPHERIAL PUMP KF-O0/1/2 series water pumps have peripheral type impeller. On the extremities of the extremities of the impeller there are several radial paddles of the impeller and the pump body. This characteristic enable the pump obtaining a regular and not pulsating flow and high pressures with quite slopping curves. Working conditions Max Temperature of Fluid up to+80 Max pressure:10bar. Max Ambient Temperature up to 40 Standard data and equipment: Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector inside. Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft, etc, will be available upon request.
QB/PM SERIES PERIPHERIAL PUMP QB/PM series are suitable for pumping clean water. They are particularly suitable for domestic applications as supply water from well, pool etc,It is also suitable for water pressure boosting,gardening and automatic water suppiying system if composed with other appliances. Working conditions Max Temperature of Fluid up to+80 Max pressure:10bar. Max Ambient Temperature up to 40 Standard data and equipment: Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector inside. Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft, etc, will be available upon request.
4SD4 Series Stainless Steel Submersible Pumps For water supply from wells or reservoirs. For domestic use, for civil and industrial applications, for garden use and irrigation. Working conditions Water temperature up to 55íµ. Minimum internal diameter of well: 102mm Maximum immersion depth: 40m
WRS Series Pipe Pume These series are WRS pumps.The WRS pump is an air venting pump.It is equipped with an air vent tousing,suitable for using in conjnction with any commercially available automatic air went,vertical mouning of the air vent at any pump position.Motor overload protection is not required.The motor operates non-overloading. These pumps are suitable for heating water to VDI 2035 and water/glycol mixtures up to a ration of 1:1,They are extremely reliable,economical and quiet to use,being particulary suitable for domestic applications such as central heating installations,industrial circulating systems,air conditioning and chilled water circulation systems,etc. Working conditions Fluid temperature rang:-10+110 Maximum ambient temperature:40 Manual 3-speed control
QXN Water-Filled Submersible Pump
WQ/WQD SERIES SUBMERSIBLE PUMP WQ/WQD series submersible sewage pumpa are widely used in agriculturer, architecture, mine, environment protection and industry, such as drainage slurry, waste water, which contained short fibre, wastepaper, sand and so on. It is also an ideal equipment for irrigation. The normal power standard is 220v/50Hz single phase, 220V/380V/50Hz three phase. Three phase 230V400V/50Hz/60Hz, single phase univoltage 230V,240V,or 127V,110V,115V. Models are available on request.
LWD Series Submesible Pump These series submersible pumps are a kind of end-suction submersible electrical motor pumps which with close-coupled motor and pump. Pumps designed as Korea style, durability, and excellent performance. They are ideal portable water pumping equipment. They are suitable for agriculture, mining enterprise, building construction sites and households etc.
LWJ Series Submesible Pump These series submersible pumps designed as Korea style, the pump can be separated from the kickstand. When using, transfer the pump onto the kickstand which can be fixed in the sinkhole, and after using, the pump can transfer out then cleanout.. These pumps are suitable for apartment , and also agricultureíóbuilding construction sites and households etc.
WQD SERIES SUBMERSIBLE PUMP WQD submersibe pumps can be used for garden watering,oxygenating of cluster box or in supplying and draining water for ordinary places and characterized by corrosion resistance,small volume,light weight and convenient operation.It is fitted with multiple water-outlet pipes,and self-regulated according to the requirements of its lift and flow,and can deadlock(it is fitted with a floating switch,so it is possible to carry out the automatic control of start-stop action under no one care). The normal power standard is 220V/50Hz single phase, 220V/380V/50Hz three phase. Three phase230V/400V/50Hz/60Hz, singe phase uni-voltage 230V,240V,or 127V,110V,115V.Modes are available on request.
Product Description Best performance electric grease pump for excavator. Product name:24VDC electric grease pump or 220VAC electric grease pump It can chose with a trolley or without trolley. Model:Y6024-24V/220V Motor power:600W working pressure:6000psi. Drum ID:280/320mm Suitable for grease:0-3# grease. Grease flowrate:350g/min. Application: For high viscosity grease injection. Suitable for all kinds of power machine grease injection. Apply for injection 0-3#grease of engineering machine. Power supply: AC220V ;24VDC Barrel capacity: 15-20liters
Hydroman Electrically Powered Slurry Pump Description: Electrically Powered Slurry Pump Solution to Transfer Sand are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors.Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman�® offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
Electrically Powered Slurry Pump Solution to Transfer Sand are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors.Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman�® offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
Voltage:12V/24V Power:245W Flowrate:50L/min Suction length:5m height:10m Inlet diameter:25mm Outlet diameter:25mm Packing size 42.5x33.5x32cm for 1 unit Net weight:13KG Gross weight:14.5kg
