Improves the heating time, due to the tanks being smaller.
More attractive electric heater and no longer cluttered spaces.
Solves many pressure-related problems due to the tanks being half the size and having to withstand less pressure per square centimeter.
30L, 50L, 80L, 100 L. Possibility of 150L and 200L also available
Product Description
1.Application: Defrosting or air heating for electric vehicles.
2.Characteristics:
Self-regulation PTC element heater is safe and will not be damaged without air flow
Thermostat will cut off the power if the unusual condition leads to overheating
Multiple INSULATIONS, electric strength is up to 2500VDC
Excellent low temperature start performance, it can quickly start heating under -40C
Voltage can be designed by client request
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Detailed specifications:
Fuel: odorless kerosene
Fuel consumption:
Maximum 0.325l/h (250g/h)
Average 0.205l/h (158g/h)
Minimum 0.086l/h (67g/h)
Heating output:
Maximum3000 w(10300 btu)
Average1900 w(6485 btu)
Minimum800w (2730 btu)
Electric power:
Maximum550w
Minimum40w
Operating autonomy:
At high power16.3 hours
At low power65 hours
Noise:
At high power35 db
At low power24 db
Ampere: 0.6a-2.5a
Security settings:
Protect against-
Child operation
Shock
Overheat (inside & outside)
Co&co2 over standard (require extra charge)
Unqualified combustion
Blackouts
Power failure
36h continuous operation
Remind you to-
Ventilate the room
Refuel the tank
Other-
Automatic cooling down itself after operation
Product size(in mm)l*w*h400*307*470
Cartoon size(in mm)l*w*h433*340*512
Weight: 12 kg
1.Efficient
Depending on external conditions (the heat of the source air), the cost of operation can be as little as 25% of that of an electric water heater, and can be used in locations unsuitable for solar hot water heating
2.Environmentally friendly
Produces no harmful gas locally from the combustion of oil, coal, or natural gas.
3.Good looking
Attractive design allows the unit to be placed in the open in finished utility spaces and basements, reducing the cost of remodeling.
4.Safe
Free from potential hazard of carbon monoxide, there is no electrical contact with water, and does not provide an open flame, making the device more suitable for installation in a garage space than natural gas heater.
5.Simplified installation and operation
Unlike oil fired units, no fuel delivery or storage is required. Unlike combustion heaters there is no need for vent piping, reducing the complexity of installation and allowing increased freedom in locating the unit.
6.Easy to operate
Contains a timer for start and stop, and an adjustment dial for easy setting of the water temperature.
7.Multiple heat source
Depending upon the location of the air exchanger, heat may be taken from the outside environment, from a sun porch or attic space, or from hot areas in light industrial environment such as bakeries and kitchens.
Tubular heaters are used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time.
Flexible tubular heaters have developed to be a new industry standard for the use in heating platens, welding bars and manifolds.
Screw in tubular heaters are standardised for use in liquids like water.
Finned tubular heaters are especially for air-heating-cabinets or tunnels.
Important and useful characteristics of tubular heaters are that they can be formed into virtually any shape, brazed or welded to any metal surface, and cast into metals.
Two power setting: 1000w/2000w
Cool / warm / hot wind for selection
Adjustable thermostat
Over-heating protecting
Safety thermal fuse built in
Power indicator light.
material of tube
material of fin
voltage:12v-600v
wattage:2w/cc2-6w/cc2
fins distance:3-10mm
fin width:0.3-0.4mm
fin high:3-5mm
working temperature:up to 800 celsius
Electric heated thermal oil heater is a perfect solutions for factories which are located in places where the electricity is cheaper than fuels. Electrical heated thermal oil boiler only required little maintenance so the running cost can be reduced a lot too. This type of thermal oil heater use the resistive heating working principle, thermic fluid is heated by electric heating elements. It is widely used in liquid and other process heating industry.
Harness the power of the sun to enjoy free hot water with our efficient and reliable solar water heaters.
Features:
Natural Circulation Pressurized System: Ensures reliable and consistent hot water flow.
Interchangeable Chrome Heat Exchanger: Allows for easy maintenance and replacement.
External Jacket Boiler Option: Provides additional insulation for increased efficiency.
Chrome Capsule Heating Element: Prevents limescale buildup for long-lasting performance.
Enameled Inner Tank: Offers superior durability and hygiene.
Aesthetic Design: Sleek and modern appearance complements any installation.
Tank System Operable Without a Float: Provides flexibility and ease of use.
2-Year Warranty: Ensures peace of mind and product reliability.
Available in both single and dual coil models to meet your specific needs!
Contact us today to learn more and bring sustainable hot water solutions to your customers!
The tubular electrothermal element (electrothermal tube) is made of magnesium oxide sand with good heat resistance, thermal conductivity and insulation by filling and compacting the holes of spiral electrothermal alloy wires (nickel-chromium and ferrochromium alloy) along the central axis of the tube with metal tubes as the shell (including stainless steel and copper tubes). The ends of the tube are sealed with silica gel and processed by other processes.
Electric industrial fan heater is one kind of product which can be fixed on a wall or a ceiling, suitable for workshops, garages, basements, and drying rooms, etc.
, it is suitable for places requiring discontinuous heating .
The equipment is matched with a switch, if it is installed too high to operate directly, the wire control type whose switch is installed on a wall can be considered when you place an order
In places needing ventilation, the equipment can be connected to a fresh air duct, fresh air volume can be adjusted via the air valve.
The electric fan heater is fixed on a wall or a ceiling, which saves ground space. If your fan heater is to be installed on a ceiling, please proclaim it when placing an order.
Venco Duct Type Electrical Heaters are used to heat the fresh air or to reheat the supply air in ventilation systems. Moreover, it is used to increase the supply air temperature with heat recovery units. All electrical Heaters have TSEK and GOST-R certification and CE marked in compliance with applicable directives.
Venco duct type electrical heaters are classified as VRE and VCE models. VRE models are rectangular duct type heaters and produced with the dimensions as required. VCE models are circular duct type electrical heaters and produced at a dimension of standard spiral duct diameter. All duct type electrical heaters can be connected to the duct system without any accessory.
Cartoon box, pallet
203951 Electric Heater Suppliers
Short on time? Let Electric Heater sellers contact you.
