Hydraulic Tubing Drains for use with deep hole drilling tools, downhole devices and other oil and off shore drilling applications provide an accurate method to equalize the fluid level in tubing strings, without mechanical manipulation. All Tubing Drains are made from high quality Alloy material and use brass shear screws. Replacement parts for all components are available from stock.
Drill Kelly: Kelly is on the top of the drill stem.Kelly is main driver of the whole drill string. It transmits drill stem weight and torsional energy from the rotary table through the drill string to the bit at the bottom of the hole. When assembled with down hole motor and Turbodrill tools, Kelly should bare the stem weight and Reverse torque,it will Measure the depth of a well and provide a circulation channel. Kelly consists of a driving part (square or hexagonal), upper joint (LH connection) and lower joint (RH connection).
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2"
Drilling Diameter 300mm, 50mm, 75mm, 60mm, 100mm, 450mm, 140-350mm
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
1) High-strength,high flexibility,high temperature,high wear resistance. 2) High-precision metal seal. 3) locking roller ball,to adapt to high-speed. 4) The use of high strength hig toughness carbide teeth. 5) Hours in the rotary cone bit with the impact,crushing and shearing the role of broken rock. 6) cone bit to adapt to the soft,medium and hard of various strata. 7) Reasonable price and long working life.
Our company produce all kinds of centralizer, such as sucker rod centralzier , casing centralizer, tubing centralizer and so on. Using casing size from 5/8"-20".
Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
The guide shoe is used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in.
The RTTS packer is a full-opening, hook wall packer used for testing, treating, and squeeze cementing operations. In most cases,he tool runs with a circulating valve assembly. The packer body includes a J-slot mechanism, mechanical slips, packer elements, and hydraulic slips. Large, heavy-duty slips in the hydraulic hold down mechanism help prevent the tool from being pumped up the hole. Automatic J-slot sleeves are standard equipment on all packer bodies. Features 1. Full-opening design of the packer mandrel bore allows large volumes of fluid to pump through the tool. 2. Can be set and relocated as many times as necessary with simple tubing manipulation. 3. Tungsten carbide slips provide greater holding ability and improved wear resistance in high-strength casing. 4. Optional integral circulating valve locks into open or closed position during squeezing or treating operations and opens easily to allow circulation above the packer
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
The specifications and main parameters Working Pressure: 1500psi Bottom Thread: 1.3/4 , 2 , 2.1/2 , 3 , 3.1/2 , 4 Bottom Connection: Box or Pin, API Tubing or Line Pipe thread. Material: AISI1045/4130 casting steel or ductile iron Split Cone Packing (rod sizes): 1 , 1.1/8 , 1.1/4 , 1.1/2 and 1.3/4
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
Product Description 1) High-strength,high flexibility,high temperature,high wear resistance. 2) High-precision metal seal. 3) locking roller ball,to adapt to high-speed. 4) The use of high strength hig toughness carbide teeth. 5) Hours in the rotary cone bit with the impact,crushing and shearing the role of broken rock. 6) cone bit to adapt to the soft,medium and hard of various strata. 7) Reasonable price and long working life. The specifications and main parameters bit size(in) bit size(mm) bit type 6 152.4 517G,537G,617G,637G 6 1/2 165.1 517G,537G 7 7/8 200.0 517G,527G,547G,617G,627G,637G 8 1/2 215.9 437G,447G,517G,537G,617G,627G,637G 9 1/2 241.3 437G,517G,537G,547G,617G 9 5/8 244.5 437G,517G,537G,547G,617G 9 7/8 250.8 437G,517G,537G,547G,617G 12 1/4 311.1 437G,517G,537G,617G,627G,637G 17 1/2 444.5 517G,537G,617G,627G,637G
Hydraulic Tubing Drains for use with deep hole drilling tools, downhole devices and other oil and off shore drilling applications provide an accurate method to equalize the fluid level in tubing strings, without mechanical manipulation. All Tubing Drains are made from high quality Alloy material and use brass shear screws. Replacement parts for all components are available from stock.
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction Working principle The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps Drilling out Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
Drill collars are extra-heavy integral tools used to concentrate weight onto the drill bit so as to produce sufficient force for the drill bit to break rock efficiently while drilling. They are made of AISI 4145H or 4145H modified steel and are connected between drill pipes and drill bits. Our drill collar connections comply with dimensional requirements specified in API Spec 7-1. Drill collars also come with slip and elevator recesses for safe and efficient handling. Slip and elevator recesses can be used together or separately. Contact Us For more information, you can contact me : Looking forward to cooperating with you!
Product Description It is recommended that centralizers be used on the rods for reduction of rod string and oil well tubing wear. The centralizers can be fixed; they can be installed directly on the rod body by pressure die casting method. The rotating centralizers are located between the locks on the rod body and can rotate on the same. Apart from ensuring wear protection, centralizers prevent deposits formation inside oil well tubing and increase the time between well overhauls. 2019 oil well down hole centralizers sucker rod centralizer product show : 2019 oil well down hole centralizers sucker rod centralizer 2019 oil well down hole centralizers sucker rod centralizer Company Information Our Services 1. Are you manufacturer or trader company? We are manufacturer and we could supply more professional technical services and goods. The goods are new or used, if you will make technical drawing and production plans for us? All our goods are new ones, the production schedule will offer to you once getting your purchase order. 2. Do you have related inspection equipments? Yes, our factory is equipment all test equipments, and I could send their pictures and test documents to you. 3. Could you tell me if your price includs the third party inspection charges? No, our price do not include the third party inspection charge, and we will notice on our Quotation. 4. Where did your products sell out? United States, Canada, Mexico, Venezuela, Colubia, and other South American Region Russica, Azerbaijan and Central Asia Countires, UAE, Saudi Arabia and Mddle East Counties. For more information, you can contact me : Looking forward to cooperating with you!
