Bench Vice Fixed Base 4 Suppliers and Manufacturers

Lump form. Grade A Size 5-10 cm. Ashes color grey. Long time burning 3-4 hours 20 Tons loading into 40'HC container Volatile 24.5% Ash content 1.1% Fixed carbons 74.4% Gross coloric value 77651 Kcal/Kg

Lump form. Length 5-20 cm. Ashes color white grey. Long time burning 4-5 hours 24 Tons loading into 40'HC container Moisture 5.80% Volatile 16.01% Ash content 2.0% Fixed carbons 81.99%

Stick form. Length 10-20 cm, Diameter 1.5-5 cm. Ashes color white grey. Long time burning 4-5 hours 24 Tons loading into 40'HC container Moisture 5.80% Volatile 16.01% Ash content 2.0% Fixed carbons 81.99%

It is a perennial herbaceous plant, with elliptic, obtuse leaves. It grows as a vine or creeper, doing well in moist, neutral soil. The most striking feature about this plant is the color of its flowers, a vivid deep blue; solitary, with light yellow markings. They are about 4 cm (1.6 in) long by 3 cm (1.2 in) wide. Some varieties yield white flowers. The fruits are 5 - 7 cm (2.0 - 2.8 in) long, flat pods with six to ten seeds in each pod. They are edible when tender. It is grown as an ornamental plant and as a revegetation species (e.g., in coal mines in Australia), requiring little care when cultivated. As a legume, its roots form a symbiotic association with soil bacteria known as rhizobia, which transform atmospheric N2 into a plant-usable form (a process called nitrogen fixing), therefore, this plant is also used to improve soil quality through the decomposition of nitrogen rich plant material.

It is a perennial herbaceous plant, with elliptic, obtuse leaves. It grows as a vine or creeper, doing well in moist, neutral soil. The most striking feature about this plant is the color of its flowers, a vivid deep blue; solitary, with light yellow markings. They are about 4 cm (1.6 in) long by 3 cm (1.2 in) wide. Some varieties yield white flowers. The fruits are 5 - 7 cm (2.0 - 2.8 in) long, flat pods with six to ten seeds in each pod. They are edible when tender. It is grown as an ornamental plant and as a revegetation species (e.g., in coal mines in Australia), requiring little care when cultivated. As a legume, its roots form a symbiotic association with soil bacteria known as rhizobia, which transform atmospheric N2 into a plant-usable form (a process called nitrogen fixing), therefore, this plant is also used to improve soil quality through the decomposition of nitrogen rich plant material.

It is a perennial herbaceous plant, with elliptic, obtuse leaves. It grows as a vine or creeper, doing well in moist, neutral soil. The most striking feature about this plant is the color of its flowers, a vivid deep blue; solitary, with light yellow markings. They are about 4 cm (1.6 in) long by 3 cm (1.2 in) wide. Some varieties yield white flowers. The fruits are 5â??7 cm (2.0â??2.8 in) long, flat pods with six to ten seeds in each pod. They are edible when tender. It is grown as an ornamental plant and as a revegetation species (e.g., in coal mines in Australia), requiring little care when cultivated. As a legume, its roots form a symbiotic association with soil bacteria known as rhizobia, which transform atmospheric N2 into a plant-usable form (a process called nitrogen fixing), therefore, this plant is also used to improve soil quality through the decomposition of nitrogen rich plant material.

PRODUCT INFO Cowslip Creeper flowers grow on long and slender, vining plants that bear dark green, heart-shaped leaves averaging 4 to 8 centimeters in diameter. The vines are tough, maturing from green to brown, and alongside each leaf node, a cluster of 10 to 20 flowers appear seasonally. Each flower averages 1 to 2 centimeters in diameter and bears five angular petals, forming a star shape. When young, the flowers are green, eventually developing a yellow-green hue at the base with solid yellow petals once the bud opens. The flowers also emit a strong and pleasant, citrus-like fragrance that is especially pungent in the evening when in bloom. Cowslip Creeper flowers are crisp, succulent, and tender with a mild, vegetal, subtly sweet, and earthy flavor. USES Cowslip Creeper flowers are a seasonal ingredient used in Filipino, Vietnamese, Chinese, Thai, and Indian cuisine. The flowers can be consumed raw, incorporated into salads for added texture, or utilized as an edible garnish to decorate cakes, desserts, and main dishes. In addition to fresh preparations, Cowslip Creeper flowers can withstand cooking and readily absorb accompanying flavors, providing a mild earthiness and subtle crisp consistency to dishes. The flowers can be battered and fried, tossed into soups and curries, or stir-fried with oyster sauce. In Thailand, Cowslip Creeper flowers are popularly boiled and dipped in chile paste. In the Philippines, the flowers are cooked into a vegetable dish known as pinakbet and frequently mixed into omelets. Cowslip Creeper flowers pair well with noodles, rice, meats such as pork, beef, and fish, shrimp, eggs, tofu, aromatics such as garlic, ginger, and holy basil, pandan juice, coconut, and vegetables such as mushrooms, long beans, squash, eggplant, and mung beans. The flowers should be immediately consumed for the best quality and flavor. SEASONS Cowslip Creeper flowers are available in the late spring through early fall.

Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.

Indonesia Wood Charcoal exporter **** Raw material : High Grade Mix Hardwood ***** Usage : BBQ - Restaurant - Grill ***** Food Grade ***** No Spark - Less Smoke - Odorless ***** Shape: Lump Shape 5 cm up ***** Ash content: 3% ***** Moisture: MC under 10% ***** Fixed carbon: approx 70% ***** Calorific value: 7500-8500 kcal/kg ***** Burning time : 4 hours up ***** Quick Lighting ***** Packing In PP Woven Bag in 20 kg / bag or by demand ***** yellow bags with your logo printed on it ***** Loading in 40ft = approx 18 tons up ***** Delivery 2 weeks ***** Price usd 260 / ton ( Fix) : FOB Tanjung Priok Port , Jakarta , Indonesia Price to Middle East main port usd 470/ton and to Australia main port usd 490/ton ***** others sea port available ***** MENTIONED IN B/L MUST BE WOOD CHARCOAL HS code 440290 >>> NO TRICKY COMMODITY SUCH WOODEN PRODUCTS , WOOD CHIPS SO EVER Payment term by Bank transfer only and to be discussed with buyers

INDONESIA BBQ Hardwood Charcoal Producer ***** Please Note Mentioned IN B/L IS Wood Charcoal - Not Wooden Products That Will Be Suspended BY Custom !!! Raw material : High grade Mix Hardwood ***** Usage : BBQ - Restaurant - Grill ( Food Grade ) ***** No Spark - Less Smoke - Odorless ***** Lump Shape Size: Dimension 5 cm up to 20 cm ***** Ash content: 3% ***** Moisture: MC under 13% ***** Fixed carbon up to 7.000 ***** Burning time : 4 hours up ***** Quick Lighting ***** Packing In Yellow PP Woven Bag with your Logo printed on it in 20 kg / bag or by demand ***** Loading in 40ft = approx 18 tons up ***** Delivery 2 weeks ***** Production capacity 20ft containers per month * ***** Payment term to be discussed ^ Shipped by Maersk Line / Sea land

Indonesia BBQ & restaurant Hard Wood Charcoal exporter , WE SHIP UNDER OUR OWN COMPANY NAME ( We are NOT TRADING COMPANY ) **** MENTIONED IN B/L IS WOOD CHARCOAL - NOT WOODEN PRODUCTS !!! Raw material : High Grade Mix Hardwood = Very heavy wood ***** Usage : For China SILICON METAL BURNING (MELTING)) **** No Spark - Less Smoke - Odorless ***** Ash content: 3% ***** Moisture: MC under 13% ***** Fixed carbon: approx up to 7000 ***** Calorific value: 7500-8500 kcal/kg ***** Burning time : 4 hours up ***** Quick Lighting ***** Packing In PP Woven Yellow or Green Colors Bag in 20 kg / bag or by demand with your company logo printed ^^^^^^ Loading in 40ft = 18 tons ***** Payment by negotiation / Bank Transfer >>>>>> Cheapest Price to all Middle East Port

2024 Indonesia Mix Hard Wood Charcoal exporter ( Not Trading Company ) if Trading company ship using third party **** Raw material : High Grade Mix Heavy Hardwood ***** Usage : For BBQ or r Restaurant ( Dimension lump shape 5cm up to 15 cm ) ***** Less Spark - Less Smoke - Odorless **** Ash content: 3% ***** Moisture: MC under 13% ***** Fixed carbon: approx UP TO 7.000 ***** Burning time : 4 hours up ***** Quick Lighting ***** Packing In Colors PP Woven Bag in 20 kg / bag or by demand ***** ( May printed ypur Company logo on the Bags ***** Loading in 40ft = approx 18 tons to 20 tons ***** Delivery 2 weeks ***** Ship using MAERK LINE to Dammam - Sohar - Jebel Ali - Hammad Dubai - Bahrain - Shuwaikh and others Middle East port ^^^^ Production Capacity 400 ton / month***** Payment by Bank Transfer only for 30% deposit and 70% balance against copy of B/L - Please Note : Mentioned in B/L is WOOD CHARCOAL - not Wooden Products ! Not Miss-declared ***** Shipping Liner : MSC or MAERSK LINE by our company name , not third party like Trading Co normally use

Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing

Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver, JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages SUPMIROR offer more solutions for building faÃ?§ade and interior decoration. SUPMIROR without paint content, more environment friendly SUPMIROR is easy for processing with tempering, laminating, curving and acid etching. JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside, to transform and decorate rooms, to increase the feeling of space.   Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design, with various colour choice, easy to clean, bring more space in modern life. Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side, can be used on door

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver ,JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages �?�??�?�?�?�¬SUPMIROR offer more solutions for building facade and interior decoration . �?�??�?�?�?�¬SUPMIROR without paint content, more environment friendly �?�??�?�?�?�¬SUPMIROR is easy for processing with tempering ,laminating ,curving and acid etching . JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside , to transform and decorate rooms, to increase the feeling of space. Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design , with various colour choice ,easy to clean, bring more space in modern life . Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side,can be used on interior decoration.

Our Company is a well-known name in the industry we are engaged in offering the best quality� Alfalfa Hay Bales. Our offered products are prepared using the latest technologies. These products are offered at very affordable rates. The size is (16 x 27 x 32 inch), wherein the approximate bale weight of each bale will be 50 Kgs. Technical Specification: Protein: 16% to 22% Fat: 1.5% to 2.5% Fibre: 24% to 32% Ash: 2.5% to 6% Moisture: 10% to 12% As in reference to the supply of Alfalfa Hay, we would like to share following details related to same: Alfalfa Haying Process is done through Sun Drying Process, which is called Sun Curing Process. The haying process is totally manual and labour intensive process. The dry matter recovery is variable in nature. The dry matter means the hay residue of the same The pricing will fluctuate based on the dry matter recovery. The baling is done with a static baler in fixed size. During the sun curing process, the green pigments are lost. Which is a direct loss of Vitamin AD3. In order to avoid the loss of green pigmentation and core vitamin value of the forage, two-stage haying is executed by HAF�®. Stage One is direct sun curing and in Stage two passive sun curing is done in Net House. During the second stage of sun curing, high water content forage on drying process turns to Bottle Green Colour (which visually looks blackish green). Sometimes lump formation is evident in hay bales and its because the hay in post sun curing process reaches to Moisture level around 6% or 7 %. During the baling process, a mild spray of saline water is applied to the hay (which adds 0.34% Moisture). That enables the appropriate binding process of � the double-compressed bales. The usage of saline water (instead of regular water) for spraying prevents the microbial and toxin growth in the hay. Internationally accepted standard of Moisture in hay is 17%, whereas our hay has Moisture not above 9% in total. The shelf life of the HAF Alfalfa Hay is 30 Months and its all because of its meticulous processing methodology The bales must not come in direct sun light. Due to Photosensitivity, the green leafy material may loose green pigments. The standard weight of the Bale will be 45 Kgs or 50 Kgs, depending on the volume of the dry hay.

A4 paper manufacturers 1-high brightness whiteness 2-good quality 3-competitive price 4-delivery time 7 days, OEM is ok 1. Features: High Brightness True Photographic Look and Feel Instant Dry, Smear and Water Proof 5760dpi, Brilliant Colors Contrast All Desktop and Large Format Inkjet Printers Compatible super 100% white a4 paper manufacturers Item copy paper Material 100% virgin wood pulp Size A4, A3, 8.5x11,8.5x14 Base Weight 80gsm, 75gsm, 70gsm Whiteness 102%-104% 110% Packing 500 sheets per ream, 5 reams per carton(box) Key performance -Nice appearance-white and clean -Nice touch-smooth and bulky -No see through-print both sides -Been developed for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines 70g 80g A4 copy paper Features and Benefits : 1 Excellent image clarity & contrast 2 High opacity and thickness 3 High performance for both side printing/copying 4 Optimized smoothness on both surface 5 Uniform toner/ink absorption to provide good print evenness 6 Paper dimensionally stable 7 Guaranteed for trouble-free operation Suitable for : 1 Photocopy 2 Laser Printing 3 Inkjet Printing 4 Plain fax Product Range : 1 Available substances are: 70gsm,,80gsm 2 Packing: Cut size 3 Provide OEM service Package: 500sheets&pcs per ream, 5reams&10reams per carton Brightness: 98%, 100%, 102% Opacity: 90% Size: 210*297mm, 420*297mm Grade A Do contact us directly with your email address for more specifications and soft offer.