Tattoo and pigment removal is an essential part of every aesthetic practice. With a growing number of individuals experiencing tattoo regret, the market is expected to hit a year over year growth of 12.7% through 2023. Also, 40% of the population susceptible to pigmentary concerns and 71% of consumers are seeking tone and texture improvement. The enlighten system is an industry-leading platform for tattoo removal and benign pigmented lesions. It is the first system on the market to feature both nanosecond and picosecond pulse durations and the ideal blend of parameters â?? the correct wavelengths, the correct spot sizes, and the correct energy levels â?? to effectively address unwanted pigment and ink. Enlighten combines three highly effective wavelengths (532, 1064, and 670 nm) and dual pulse durations (2 ns and 660/750 ps) to effectively remove multi-color tattoos, and introduce an entirely new approach to gentle, effective and quick improvements in the appearance of unwanted pigment and overall skin quality. A powerfully versatile pico device, enlighten safely and effectively removes tattoos and addresses skin and pigment concerns on all skin types. Tattoos and pigment are comprised of multiple colors which require multiple wavelengths to effectively remove. enlightenâ??s three wavelengths and dual pulse durations effectively removes unwanted tattoos and pigment - even those resistant to traditional treatments. enlightenâ??s skin revitalization treatments - PICO Genesis and PICO Genesis FX - safely address pigmentary concerns and induce dermal disruption to remodel the skin and treat acne scars in fewer than three sessions. Features: Dual pulse durations: 2 ns and 750/660 ps pulse durations Three fully-integrated laser wavelengths â?? 532 nm, 670 nm and 1064 nm Micro Lens Array (MLA) for effective treatments on acne scars Safe for all skin types 2019 Cutera Enlighten III Picosecond Nanosecond All Skin Type Tattoo & Pigment Removal Laser â?? 3 Wavelengths 1064nm & 532nm Q-Switched KTP, & 670nm; Includes Professional Installation at your Office; Manufactured on 04/24/2019; Perfect Operating Condition, Excellent Cosmetic Condition; Received Full Maintenance Service 09/10/2020, Service Record Available Upon Request; Reason for Selling: Closed Spa Portion of Practice; Included Wavelengths & Pulse Counts: 1064nm = 80,467 Pulses, 532nm = 3,203 Pulses, 670nm = 5,116 Pulses; Total Pulse Count = 88,786 Pulses; Also Includes: Articulating Arm, Footswitch, (3) Operator Eyewear, (3) Patient Eyewear, Key, (2) Warning Signs, Operators Manual, Quick Start Guides.
CUTERA is a leading provider of advanced laser and light-based aesthetic systems, and our latest technology, the Enlighten III, is a state-of-the-art device that offers a wide range of benefits for practitioners and patients alike. This versatile system offers a number of different treatment options, including tattoo removal, pigmented lesion removal and skin rejuvenation. The Enlighten III is a powerful laser system that utilizes three wavelengths and three pulse durations, to provide optimal results for various skin conditions. The 532nm wavelength is perfect for treating light pigmentation as well as red and yellow tattoo ink. The 670nm wavelengths is great for treating pigmentation on darker skin types and stubborn tattoo pigments like purple and green. The 1064nm wavelength is ideal for removing dark tattoos, and treating all skin types for pigmentation and is perfect for skin revitalisation, from pores and fine lines to acne scaring. Enlighten combines three highly effective wavelengths (532, 1064, and 670 nm) and dual pulse durations (2 ns and 660/750 ps) to effectively remove multi-color tattoos, and introduce an entirely new approach to gentle, effective and quick improvements in the appearance of unwanted pigment and overall skin quality. A powerfully versatile pico device, enlighten safely and effectively removes tattoos and addresses skin and pigment concerns on all skin types. Tattoos and pigment are comprised of multiple colors which require multiple wavelengths to effectively remove. enlightenâ??s three wavelengths and dual pulse durations effectively removes unwanted tattoos and pigment - even those resistant to traditional treatments. enlightenâ??s skin revitalization treatments - PICO Genesis and PICO Genesis FX - safely address pigmentary concerns and induce dermal disruption to remodel the skin and treat acne scars in fewer than three sessions. 2021 Cutera Enlighten III Picosecond Nanosecond Tattoo Removal Laser; Recertification Fee Waived with the New Owner being Responsible to Pay for Cutera Installation & Training Fees; Manufactured on 02/05/2021; Reason for Selling: Not Using; Also Includes: Articulating Arm, Footswitch, External Shield Goggles, (2) 670NM 1064NM NMX Eyewear, (2) 532NM 1064NM NMX Eyewear, (2) Purple Cases, Cleaning Kit, (10) Disposable Disinfectant Wipes, Key, Interlock, Safety Sign, Enlighten Handpiece Replacement Cable, Operators Manual.
ENGINE: 4.0 L, 6-CYLINDER, PETROL, VVT-I MAX OUTPUT: 228 HP / 5200 RPM (170 KW) MAX TORQUE: 360 NM / 3800 RPM 5 SPEED MANUAL TRANSMISSION FRONT & REAR DIFFERENTIAL LOCK POWER SIDE VIEW MIRRORS, CHROME PLATED FRONT BENCH SEAT (3 PASSENGERS) MANUAL AIRCONDITIONING GLOVE BOX COOLING VENT SAHARA MIGHTY 79 CONVERSIONS DETAILS RKC FAB CUSTOM FRONT BUMPER WITH BULL BAR RKC FAB CUSTOM ROOF RAIL RKC FAB CUSTOM SNORKEL RKC FAB CUSTOM FENDER RAILS RKC FAB CUSTOM SIDE STEPS EVO CORSE RIM 17"0" H&R WHEEL SPACER CUSTOM EXHAUST TAILPIPE 2.5 KING SHOCK ADJUSTABLE TO 3" TO 5" KING STEERING STABILIZER TIRE: MILESTAR 315/17/17 DOBISON 3-INCH COIL FRONT DOBINSON LEAF SPRING DOBINSON FRONT AND REAR SWAY BAR DOBINSON ABS BRACKET SPACER KIT 70 SERIES DOBINSON U BOLT KIT DOBINSON POLYURETHANE BUSH KIT DOBINSON SHACKLE KIT AND SHACKLE PIN DOBINSON BRAKE EXTENSION PROPORTIONING VALVE ADJUSTER DOBINSON SWAY BAR EXTENSION RK ROBUST 12000LBS WINCH BYSON CELLULAR ANTENNA X 2 CUSTOM SEATS CUSTOM CUP HOLDER CUSTOM STEERING WHEEL ALUMINIUM CANOPY ALUMINIUM CANOPY TRAY X 1 3000W KISAE SMART INVERTER KISAE INVERTER CHARGE CONTROL PANEL DC-DC CHARGER WITH MPPT SOLAR 10-35V DC CRUISE LIGHT WIRELESS CONTROLLER 200AMP BATTERY BACK-UP 22OV WALL SOCKET WATER TANK 75LTR WITH AUTOMATED PUMP WATER GAUGE ARB TWIN COMPRESSOR CANOPY ROOF RACK SHOWER TENT ROOT TOP TENT REFRIGERATOR 48LTR DELONGHI DOLCE GUSTO COFFEE MACHINE RKC FAB CUSTOM DRAWER RKC FAB CUSTOM TIRE CARRIER RKC FAB CUSTOM PULL-OUT TABLE RKC FAB CUSTOM FOLDABLE LADDER RKC FAB CUSTOM EXTERNAL STORAGE RKC FAB CUSTOM TOOLS DRAWER RKC FAB CUSTOM ROOF & DOOR MOLLE PANEL SIBERIA DRC 50" STRANDS LIGHTBAR RLB ROCK LIGHTS SIBERIA MULTIPLE OPTIONS TAIL LED
4.Main technical parameters 4.1. Capacity: 5, 10, 20, 25, 50100200kg (optional) 4.2. Unit switching: kg, N, LB 4.3. Load decomposition degree: 1/250,00 4.4. Load accuracy: 0.25% 4.5. Maximum stroke: 1000mm (excluding fixtures) 4.6. Test speed: 30-300 mm/min 4.7. Displacement resolution: 0.01 mm 4.8. Display device: touch screen (capable of displaying and printing test times, test values, maximum values, fracture values, etc.) 4.9. Motor: AC motor 4.10. Overall dimensions (L * W * H): 550 * 500 * 1240mm 4.11. Weight: 80kg 4.12. Power supply: 1 , 220V, 15A or specified 4.13. Delivery: One set of tension fixtures 5. Introduction to System Functions 5.1. It has tensile and pressure testing functions. 5.2. It has a pull stop function. 5.3. It can display displacement, has functions such as elongation, pressure, and other material testing machines. 5.4. There is an automatic stop alarm function for overload load setting. 5.5. It has an automatic save function, and can coexist with manual and automatic testing data up to ten times. 5.6. Use a list format to display the saved test data. 5.7. With an administrator password, users can modify their startup password to make machine management more secure. 5.8. Using software to calibrate the load value is extremely easy to calibrate. 5.9. The internal functions are set with full Chinese prompts, making the operation convenient and simple. 5.10. Rich testing functions, capable of conducting tensile tests, pressure tests, compressive tests, elongation tests, etc. 5.11. Display method: Real time display on the touch screen. 5.12. Tensile range: Standard configuration 200kg (optional). 5.13. The accuracy is 1/25000. 5.14. It can print test data and dates, making it easy to view test data for each stage 5.15. Conversion of three types of force units: N, Kg, and LB. During the testing process, 5 sets of test data at any position can be manually and automatically captured and printed. 7. Introduction This product tests the tensile strength, compressive strength, and elongation of various materials, semi-finished products, and finished products. It can perform tests such as peeling, tearing, bending, bending, and compression, and is suitable for use in industries such as metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, leather, etc. 8. Design standards ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7, etc
RO technology introduction : The principle of RO technology is that under the action of higher osmotic pressure than the solution, RO water equipment will leave these substances and water according to other substances can not pass through the semi-permeable membrane. Reverse osmosis, also known as reverse osmosis, is a membrane separation operation that uses the pressure difference as a driving force to separate the solvent from the solution. Pressure is applied to the material liquid on one side of the membrane. When the pressure exceeds its osmotic pressure, the solvent will reverse osmosis against the direction of natural osmosis. Thus the low pressure side of the membrane to get through the solvent, namely osmotic liquid; The high pressure side produces a concentrated solution, that is, a concentrated solution. For example ,if the seawater is treated with reverse dredging, fresh water is obtained on the low pressure side of the membrane and brine is obtained on the high pressure side. Advantages and Applications : RO Reverse osmosis equipment has been developed rapidly in the past 20 years due to its advantages of good water quality, low energy consumption, simple process and easy operation. The main application areas of reverse osmosis equipment include: 1. Flowers and aquaculture water: flower seedling and tissue culture; Fish xing buckwheat colonization, beautiful fish and so on. 2. Fine chemical water: cosmetics, detergent, biological engineering, genetic engineering, etc 3. Alcohol drink water: liquor, beer, wine, carbonated drinks, tea drinks, dairy products, etc 4. Electronics industry ultra-pure water: monocrystalline silicon semiconductor, integrated circuit block, liquid crystal display, etc 5. Pharmaceutical industry water: pharmaceutical preparations, infusion, extraction of natural substances, traditional Chinese medicine drinks, etc 6. Quality drinking water: community, hotels, airports, schools, hospitals, enterprises and institutions 7. Industrial production water: washing glass water, automobile, electroplating ultra-pure water, coating, paint, paint, boiler softening water, etc 8. Seawater brackish water desalination: making drinking water from islands, ships and saline-alkali areas 9. Water for textile and papermaking: water for printing and dyeing, water for jet loom, water for papermaking, etc 10. Water for food processing: cold drink food, canned food, livestock and meat processing, vegetable finishing, etc 11. Circulating cooling water: air conditioning, smelting, water cooled air conditioning 12 .Swimming pool water purification: indoor natatorium, outdoor elephant view pool, etc 13. Drinking water: purified water, mineral water, mountain spring water, bucket bottled water, etc.
1. Excavators are important and widely used equipment in construction industry. Their general purpose is to excavation but other than that they are also used for many purposes like heavy lifting, demolition, river dredging, cutting of trees etc. 2. Backhoe is another widely used equipment which is suitable for multiple purposes. This is well useful for excavating trenches below the machine level and using front bucket loading, unloading and lifting of materials can be done. 3. Dragline excavator is another heavy equipment used in construction which is generally used for larger depth excavations. For the construction of ports, for excavations under water, sediment removal in water bodies etc. can be done by dragline excavator. 4. Bulldozers are another type of soil excavating equipment which are used to remove the topsoil layer up to particular depth. These are widely used for the removal of weak soil or rock strata, lifting of soil etc. 5. Pile Driving Equipment. Another heavy equipment used in construction site is pile driving equipment in case of pile foundation construction. 6. Pile boring equipment is used to make bore holes in the construction site to install precast piles. 7. Dump trucks are used in construction sites, generally, in big construction site, off-road dump trucks are used. 8. Feller buncher is tree cutting heavy equipment used to remove large trees in the construction field. 9. Telehandlers are hoisting equipment used in construction to lift heavy materials up to required height or to provide construction platform for workers at greater heights etc. 10. Compactors or Rollers are used to compact the material or earth surface. Different types of compactors are available for different compacting purposes. 11. Paver or Asphalt paver is pavement laying equipment which is used in road construction. 12. Tower cranes are fixed cranes which are used for hoisting purposes in construction of tall structures. Heavy materials like pre-stressed concrete blocks, steel trusses, frames etc. can be easily lifted to required height using this type of equipment. 13. Wheel Tractor Scrapers are earth moving equipment used to provide flatten soil surface through scrapping. 14. Graders also called as motor graders are another type of equipment used in construction especially for the construction of roads. It is mainly used to level the soil surface. 15. Trenchers or Trenching machines are used to excavate trenches in soil. These trenches are generally used for pipeline laying, cable laying, drainage purposes etc. Both types of trenchers are available in tracked as well as wheeled vehicle forms. 16. Loaders are used in construction site to load the material onto dumpers, trucks etc. The materials may be excavated soil, demolition waste, raw materials, etc. A loader contain large sized bucket at its front with shorter moving arm.
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range() 20 55 10 Charging temperature range() 15 55 11 Storage ambient temperature) (20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 5% 95% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25 C, 3000 cycles ( 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45 C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature(%) 3%/month, 25 C 17 High temperature self-discharge rate (%) 5%/month, 45 C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2) 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2 C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
PP Spunbonded Nonwoven Fabrics, Non Woven Fabric Mattress Cover, Disposable Mattress Cover REASONS TO CHOOSE MATTRESS: PP spunbonded nonwoven Fabrics 1ï¼?Material: 100% polypropylene 2ï¼?Weight: 15~200gsm 3ï¼?Width: within 320cm 4ï¼?Color: any colors available 5ï¼?factory direct: low price, steady supply PRODUCT SPECIFICATIONS: Item PP spunbonded nonwoven fabrics material 100% polypropylene technics Spun-bonded design dot color any color acceptable weight 15~200gsm width within 320cm length according to customer's requests roll weight around 35kg or customized MOQ 1000kgs 20'FT container around 4~5 tons ( the details quantity is up to the diameter of the roll) 40â??FT container about 10-11tons (the details quantity is up to the diameter of the roll) 40'HQ container around 11~12 tons ( the details quantity is up to the diameter of the roll) delivery time within 3 weeks upon receipt of advance payment A. T/T, 30% deposit, balance against copy of B/L B. Confirmed irrevocable L/C at sight packaging in the roll, inside the paper tube, outside PE film feature waterproof, mothproof, eco-friendly, breathable, anti-static, anti-bacteria, anti-pull, tear-resistant, flame-retardant application home textile, hospital, agriculture, bag, hygiene, garment, car, industry, shoes,interlining,lining,bedding, and so on. factory Qingdao yihe packing products manufacturer We are a factory specializing in producing PP spun-bonded nonwoven fabrics, and PP nonwoven bags, and have been exported for many years. Our products are superior, and are very competitive, because we are manufactory, we are the source. Our products are exported mainly to Europe, North America, Japan, South Korea, Middle East and so on. Should you be interest of any of items, please let us know. We shall be glad to give you our lowest quotations upon receipt of your detailed requirements. Qingdao Yihe is specializing in Baby Diaper Non Wovens Fabrics and Sanitary Napkin Non Wovens Fabrics. The transportation is convenient, the location is properly. We are Pet Pads Non Wovens Fabrics Manufacturer, and our Polypropylene Spun bonded Non woven Fabrics are guaranteed.
Jump Rope Description: Most consider a good long jog to be the ultimate form of exercise. Yet, jumping rope is known to have some benefits over running. Because the body's weight is distributed on the balls of the feet when landing, jumping rope is less stressful on the knees and ankles.Jumping rope has a lower-impact on the joints and lessens the chances of injury. This type of exercise is great at building cardiovascular stamina. The entire body will benefit, including the arms, shoulders, legs, and wrists. Jumping rope also builds coordination and precision. Boxers are well known for jumping rope in order to improve footwork. Even mixed martial artists use jump ropes to compliment their regimens. Jumping rope does not require much. A single piece of very inexpensive equipment, and an area to jump is all a user needs. Just you alone and a small space. Grab a rope, and go. 1) Skipping method is used before the soles of the feet takeoff and landing, can not remember the toe or heel landing, so as to avoid brain shock, when jumping in the air, not extreme bending the body, and become the natural bending posture. Jump, breathing naturally rhythm. 2) Hand rope method hands respectively hold the rope ends, usually with a foot hold of the rope, arms elbow will arm lift flat, the rope was straightened at suitable length. 3) Rope swinging forward swing, big arm near the elbow slightly on both sides of the body, the upper arm abduction, the approximate level, wrist force for rotation abduction, the hands circle action in the side of the body, and each swing once, the rope from the back up and down, swing a week, the rope. Speed and hand rope is proportional to the speed, shaking more quickly, then the rope swing faster. 4) Stop rope forward roll, kick out, before the soles of the feet off the ground, heels make rope stopped at the footbackward roll, then after a foot, heel, sole on the ground, so that the rope stop in the soles of the feet. 5) Should be gradual exercise.Start practicing rope skipping, action should be slow to fast, from easy to difficult. All kinds of action learning first single rope skipping, and then learn more complex or group of people jumping rope skipping movements. Here are some of the brilliant benefits: 1. Easily adjustable length to fit both kids and adults. 2. Conveniently lightweight for perfect portability. 3. Improve speed and coordination. 4. Use the tried and true exercise of jumping to improve your fitness level, build strength and endurance and lose weight. Bingehua specializes in the production and export of fitness accessories, body-sculpting and power training goods, mainly including yoga ball, Resistance Band Loop, Half Balance Ball, etc. Our own factory was founded more than 10 years.
Hydraulic end assembly AH0501010500 AH35001-05.00 Sealing washer AH0501010203 AH35001-02.03 Crankshaft assemble AH1301010200 AH36001-02.00 Oil seal ring AH1301010405 AH36001-04.21 Adapter connectorZG2-1/2â?³ AH1001010807 AH33001-08A.07 Hydraulic end assembly AH0801010500 AH34001-05.00 Sealing washer AH0801010203 AH34001-02.03 Crankshaft assemble AH1601010100 AH37001-01.00 O-ring �?190�?3.55 530301011900035507 GB3452.1-82 Short circuitZG2-1/2â?³-NPT2-1/2 AH1001010808 AH36001-08C.04 Hydraulic end assembly AH1001010500 AH33001-05.00 Sealing washer AH1001010203 AH33001-02.03 Pinion Shaft assemble AH1301010300 AH36001-03.00 Two-lip seal 5"X6.25"X0.625" AH1301010406 AH36001-04.08A Flexible pipe �¦22�?�¦37 AH1001010180001 L=1500 Exhaust filter assembly AH0501011400 AH35004-11.00 Inner ring AH0501010204 AH35001-02.04 Pinion Shaft assemble AH1601010200 AH37001-02.00 Locking spring AH1301010407 AH36001-04.13 Gladhand �¦22�?�¦37 AH100101080900 AH33001-08.18.00 Exhaust filter assembly AH1001011900 AH33014-04.00 Inner ring AH0801010204 AH34001-02.04A Crossing Head Assemble AH1301010400 AH36001-04.00 Splash guard AH1301010408 AH36001-04.10 90�°Elbow NPT1â?³ AH1001010810 AH33001-08.16 Cross head assembly AH0501010400 AH35001-04.00 Inner ring AH1001010204 AH33001-02.04 Hydraulic End Assemble AH1301010500 AH36001-05A.00 Extension rod AH1301010409 AH36001-04.11 Adapter connector NPT2-1/2³ AH0801020801 AH34001-08B.07 Cross head assembly AH0801010400 AH34001-04.00 Outer ring AH050101020500 AH35001-02.05.00 Power end lubrication assembly AH1301010600 AH36001-06C.00 Crosshead pin AH1301010410 AH36001-04.12A Sealing washer AH1001010814 AH36001-08B.09 Cross head assembly AH1001010400 AH1001010400 Outer ring AH080101020500 AH34001-05.00 Base Seat AH1301010700 AH36001-07K.00 O-ring �?160�?7 530301011250070000 GB3452.1.-82 NPT1â?³Flange AH1001010815 AH36001-08B.10 Pinion shaft assembly AH0501010300 AH35001-03.00 Outer ring AH100101020500 AH33001-02.05.00 Spray Pump Assembly AH1301010800 AH36001-08C.00 Bolt M20�?65 T502-6005K T52-6005K Bead apex A-3708 140301012031500000 GB1171-74 Pinion shaft assembly AH0801010300 AH34001-03.00 connecting rod AH0501010206 AH35001-02.06 Sealing washer AH10010109 AH33001-09 Sealing gasket AH1301010411 AH36001-04.15 Flexible pipe �¦38�?�¦53 AH100101080002 �¦38�?�¦53-L=750 Pinion shaft assembly AH1001010300 AH33001-03.00 connecting rod AH0801010206 AH34001-02.06 Breather Cap T515-1001.00 T515-1001.00 O-ring 160�?7 530301011600070000 GB3452.1-82 90 Elbow
N76E003AT20 Overview The N76E003 is an embedded flash type, 8-bit high performance 1T 8051-based microcontroller. The instruction set is fully compatible with the standard 80C51 and performance enhanced. The ic n76e003at20 contains a up to 18K Bytes of main Flash called APROM, in which the contents of User Code resides. The N76E003 Flash supports In-Application-Programming (IAP) function, which enables on-chip firmware updates. IAP also makes it possible to configure any block of User Code array to be used as non- volatile data storage, which is written by IAP and read by IAP or MOVC instruction. There is an additional Flash called LDROM, in which the Boot Code normally resides for carrying out In-System-Programming (ISP). The LDROM size is configurable with a maximum of 4K Bytes. To facilitate programming and verification, the Flash allows to be programmed and read electronically by parallel Writer or In-Circuit-Programming (ICP). Once the code is confirmed, user can lock the code for security. The n76e003at20 provides rich peripherals including 256 Bytes of SRAM, 768 Bytes of auxiliary RAM (XRAM), Up to 18 general purpose I/O, two 16-bit Timers/Counters 0/1, one 16-bit Timer2 with three-channel input capture module, one Watchdog Timer (WDT), one Self Wake-up Timer (WKT), one 16-bit auto-reload Timer3 for general purpose or baud rate generator, two UARTs with frame error detection and automatic address recognition, one SPI, one I C, five enhanced PWM output channels, eight-channel shared pin interrupt for all I/O, and one 12-bit ADC. The peripherals are equipped with 18 sources with 4-level-priority interrupts capability. The N76E003 is equipped with three clock sources and supports switching on-the-fly via software. The three clock sources include external clock input, 10 kHz internal oscillator, and one 16 MHz internal precise oscillator that is factory trimmed to �±1% at room temperature. The N76E003 provides additional power monitoring detection such as power-on reset and 4-level brown-out detection, which stabilizes the power-on/off sequence for a high reliability system design. The N76E003 microcontroller operation consumes a very low power with two economic power modes to reduce power consumptionï¼? Idle and Power-down mode, which are software selectable. Idle mode turns off the CPU clock but allows continuing peripheral operation. Power-down mode stops the whole system clock for minimum power consumption. The system clock of the N76E003 can also be slowed down by software clock divider, which allows for a flexibility between execution performance and power consumption. With high performance CPU core and rich well-designed peripherals, the N76E003 benefits to meet a general purpose, home appliances, or motor control system accomplishment. If you are looking for a reliable electronic component company, don't hesitate to contact us!
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
Hydraulic end assembly AH0501010500 AH35001-05.00 Hydraulic end assembly AH0801010500 AH34001-05.00 Hydraulic end assembly AH1001010500 AH33001-05.00 Exhaust filter assembly AH0501011400 AH35004-11.00 Exhaust filter assembly AH1001011900 AH33014-04.00 Cross head assembly AH0501010400 AH35001-04.00 Cross head assembly AH0801010400 AH34001-04.00 Cross head assembly AH1001010400 AH1001010400 Pinion shaft assembly AH0501010300 AH35001-03.00 Pinion shaft assembly AH0801010300 AH34001-03.00 Pinion shaft assembly AH1001010300 AH33001-03.00 Crankshaft assembly AH0501010200 AH35001-02.00 Crankshaft assembly AH0801010200 AH34001-03.00 Crankshaft assembly AH1001010200 AH33001-02.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Power end lubrication assembly AH0801010600 AH34001-06C.00 Power end lubrication assembly AH1001010600 AH33001-06C.00 Spray pump assembly AH0501010800 AH35001-08B.00 Spray pump assembly AH0801010800 AH34001-08B.00 Spray pump assembly AH1001010800 AH33001-08C.00 Random tool AH0501011500 AH35001-20.00A Random tool AH0801011400 AH34001-15.00A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09 Rubber strip 25 Ã?? 10 Ã?? 4000 Rubber strip 25X10X4880 Ventilation hood T515-1001.00 T515-1001.00 Oil level gauge assembly AH1001011400 AH33001-18.00 Seal gasket AH05010111 AH35001-12 Seal gasket AH08010111 AH34001-12 Seal gasket AH10010112 AH33001-15 Sealing washer AH10010116 AH36001-19 Seal gasket AH05010113 AH35001-15 Seal gasket AH10010116 AH36001-19 Seal gasket AH10010118 AH33001-25 Cylinder assembly AH050101050100 AH35001-05.01A.00 Cylinder assembly AH100101050100 AH33001-05.01A.00 Cylinder head flange AH0501010502 AH35001-05.02 Cylinder head flange AH1001010502 AH33001-05.02 Cylinder head AH0501010503 AH35001-05.03A Cylinder head AH1001010503 AH33001-05.03A Cylinder liner sealing ring AH0501010504 AH35001-05.04 Cylinder liner sealing ring AH1001010504 AH33001-05.04 Cylinder head plug AH050101050500 AH35001-05.05A Cylinder head plug AH100101050500 AH33001-05.05A O-ring 75 Ã?? 5.3 530301010750053000 GB3452.1-82 O-ring 97.5 Ã?? 3.55 530301010975035000 GB3452.1-82 Discharge line AH0501010507 AH35001-05.08 Discharge line AH0801010501 AH34001-05.01 Discharge line AH1001010507 AH33001-05.08 Bonnet seal ring AH0501010508 AH35001-05.09 Bonnet seal ring AH1001010508 AH33001-05.09 Valve cover AH0501010509 AH35001-05.11A Valve cover AH1001010509 AH33001-05.11A Stem guide (I) AH0501010510 AH35001-05.12 Stem guide (I) AH1001010510 AH33001-05.12 Spring guide AH100101051100 AH33001-05.13.00 Baffle AH0501010511 AH35001-05.13 Baffle AH1001010512 AH33001-05.14 Valve spring AH1001010529 AH00000101 AH33001-05.16A Valve assembly AH0000020500 AH35001-05.14A.00 Valve assembly AH0000020100 AH33001-05.17A.00
Welding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube/single module to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,30khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11.Coloered LCD display,easy to use Model MMA 200/200DV MMA 200PFC/250 MMA 300 MMA400 MMA500 MMA 630 Rated Input Voltage(V) 1~230/95~275 95~275/3~400 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 46 49/17 21 35 45 62 No-load Voltage(V) 68 78/70 70 70 70 70 Power Factor 0.65 0.99/0.7 0.7 0.7 0.7 0.7 Output Current Range (A) 5-200 5-250 5-300 5-400 5-500 5-630 Duty Cycle(%)40C�° 25% 25% 25% 25% 25% 25% Efficiency(%) 80 80 80 80 80 80 Insulation Class H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 6/7.5 8.5/11.5 13 17 28 32 Dimension(mm) 360x180x330 410X180X330 410X180X330 650X285X510 650X285X510 680X285X510 WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products. Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T, L/C, WESTERN UNION, PAYPAL etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock. For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement . Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc.
Definition: A type of hidden color carbon paper with a direct copy and direct color capability is carbonless copy paper, also known as CCP, Non-carbon copy paper, or NCR paper. In order for the micro-capsule in the pigment and oil solution to overflow and come into touch with the color development agent following the dyeing reaction, it must be subjected to an external force. mostly used for bills,continuous receipts, multi-link forms, general business receipts.Both blue and black picture carbonless copy paper is available. Characteristics: 1. Carbon pad free "carbon paper," direct writing is convenient and time-saving, carbon copy number 2-6 pages, and electric printing 2-10 pages, all of which may significantly increase job efficiency and satisfy modernization needs. 2: Clear, brilliant, non-fading, copy-writing that can thwart change and copying 3: Keep your hands clean and avoid contaminating your clothes or other paper products 4:Colorful and simple to distinguish processing. 5. Excellent paper with a smooth surface, superior strength to color paper weighing 28 grams, durability, and vivid printing colors 6:Safe and dependable, does not include any hazardous raw chemicals, and color graphics can be preserved for up to 15 years after production Applications : 1: Documents primarily use carbonless paper. Carbon-free carbon paper has been used for all previously existing invoices, contracts, treaties, and other legal effects of formal documents. Since traditional documents are merely plain paper, a copy layer must be added underneath them. Contrarily, special paper is used to bind carbon-free paper 2: In the case of the triple carbon-free paper receipt, it can be divided into upper paper, middle paper, and lower paper. The top paper is also known as CB Coated Back. Micro-capsules containing force-sensitive pigment oil are coated on the back of the paper. The medium paper is also known as the double Coated paper (code CFB, that is, Coated Front and Back). The front of the paper is coated with a chromogenic agent and the back is coated with micro-capsules containing force-sensitive pigment oil. The bottom paper is also known as the Coated paper (code CF, that is, Coated Front) the paper surface is coated with only the color agent. Self-Contained paper (SC, self-contained) is contained in a micro-capsule layer coated with chromatin oil on the back and chromatin and micro-capsule contained in chromatin oil on the front. 3:The upper paper and the lower paper do not have the carbon copy effect, only the medium paper has the carbon copy effect. In the use of non-carbon paper printed documents are usually equipped with a small piece of cardboard separated on the joint document, so as to avoid excessive writing force, resulting in other joint documents under the carbon copy. 4:Carbonless paper has roughly four colors: White/red/blue/green and other four colors, to distinguish the role of the joint order.
Metal tube tube CNC plasma cutting machine is mainly used for cutting all metals, including but not limited to aluminium sheet, iron sheet, galvanized (steel) sheet, mild steel, titanium sheet. stainless steel, iron etc. Applies in cars, motorcycles, pressure vessels, chemical machinery, nuclear industry, general machinery, engineering machinery,steel structure, shipbuilding and other industries. Features of Metal tube tube CNC plasma cutting machine 1. This plasma cutting machine is used for metal square & round tube tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes' metal sheet. 2. The liner rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching. 3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training. 4. Driving system is LEADSHINE or YASKAWA servo drive (Dual Driver makes it fast), you can choose China LEADSHINE , Japan Panasonic /YASKAWA servo motor or stepper motor to make sure whole machine can run with smoothly in a wider speed range, short acceleration time 5. Torch height controller can adjust the best cutting distance automatically, to confirm working piece high precision cutting. 6. Automatic plasma machine Chuck rotary makes work efficiency Parameters of Metal tube tube CNC plasma cutting machine No. Description RB6020T (Length is 6000mm,Diameter is 100-400mm) 1 Working Size 200(Diameter)*6000mm(Length) 2 Z Axis Clearance 150mm (200 And Higher Is Optional) 3 Table Type Chuck rotary (Automatic + Dual Driver) 4 Transmission System Rack Pinion And Hiwin Linear Rails For X/Y 5 Driving System Leadshine Servo motor ( YASKAWA / PANASONIC is optional, also according to your needs and budget.) 6 Max. Cutting Speed 12000mm/Min(different configuration and different material and thickness speed is different) 7 Max. Travelling Speed 30000mm/Min(different configuration speed is different) 8 Working Voltage 380V/3ph(220V/3ph is optional) 9 Plasma Generator Huayuan China and USA power as your requirements 10 Arc Mode FANGLING 11 Output Current 63/100/120A/160A/200A� China (45/65/85/105/125/200A USA) 12 Max. Cutting � Thickness 6/15/18/20/30mm (This is approximate, It also according to power and kinds metal) 13 Operating System JiaoDa fangling FX430A controller (Professional for tube cutting) 14 Working Material Steel, Aluminum, Galvanized Sheet, Titanium Plate,  Platinum Plate  and almost all of the metal� square tube/Circle tube
Product Description FRAME NEW OCLV Mountain Carbon main frame, 1.8'' lower head tube, Removable Integrated Battery (RIB), Knock Block 2.0, guided internal routing, 34.9mm seat tube, magnesium rocker link, Motor Armor, Mino Link, ABP, Boost148, 12mm thru axle, 150mm travel FORK RockShox ZEB Select+, DebonAir spring, Charger 2.1 RC damper, eMTB optimized crown, tapered steerer, 44mm offset, Boost110, 15mm Maxle Stealth, 160mm travel SHOCK RockShox Super Deluxe Ultimate RT3, DebonAir spring, Thru Shaft 3-position damper, 230mm x 57.5mm Max compatible fork travel 170mm (580mm axle-to-crown) WHEEL FRONT Bontrager Line Comp 30, Tubeless Ready, 6-bolt, Boost110, 15mm thru axle WHEEL REAR Bontrager Line Comp 30, Rapid Drive 108, Tubeless Ready, 6-bolt, Boost148, 12mm thru axle SKEWER REAR Bontrager Switch thru axle, removable lever *Tire Size: M, L, XL Bontrager SE5 Team Issue, Tubeless Ready, Core Strength sidewalls, aramid bead, 120 tpi, 29x2.50'' Size: M, L, XL Bontrager SE6 Team Issue, Tubeless Ready, Core Strength sidewalls, aramid bead, 120 tpi, 29x2.50'' *Tire part Size: M, L, XL Bontrager TLR sealant, 6oz Size: M, L, XL Bontrager TLR valve, 50mm Max tire size Frame: 29x2.60" Fork: See manufacturer SHIFTER SRAM GX Eagle AXS, 12 speed REAR DERAILLEUR SRAM GX Eagle AXS CRANK SRAM X1 1000, 34T, 165mm length CASSETTE SRAM Eagle XG-1275, 10-52, 12 speed CHAIN SRAM GX Eagle, 12 speed PEDAL VP-536 nylon platform Max chainring size 34T SADDLE Bontrager Arvada, austenite rails, 138mm width *Seatpost Size: M Bontrager Line Elite Dropper, 150mm travel, MaxFlow, internal routing, 34.9mm, 440mm length Size: L Bontrager Line Elite Dropper, 170mm travel, MaxFlow, internal routing, 34.9mm, 485mm length Size: XL Bontrager Line Elite Dropper, 200mm travel, MaxFlow, internal routing, 34.9mm, 550mm length HANDLEBAR Bontrager Line Pro, OCLV Carbon, 35mm, 27.5mm rise, 780mm width GRIPS Bontrager XR Trail Elite, nylon lock-on STEM Bontrager Line Pro, 35mm, Knock Block, Blendr compatible, 0 degree, 45mm length HEADSET Knock Block Integrated, cartridge bearing, 1-1/8'' top, 1.8'' bottom BRAKE SRAM Code R 4-piston hydraulic disc *Brake rotor Size: M, L, XL SRAM CenterLine, 6-bolt, round-edge, 180mm Size: M, L, XL SRAM CenterLine, 6-bolt, round edge, 200mm BATTERY Bosch PowerTube 750Wh, smart system CHARGER Bosch standard 4A, 110V, smart system CONTROLLER Bosch Kiox 300 MOTOR Bosch Performance Line CX
Product Description FRAME 800 Series OCLV Carbon, KVF (Kammtail Virtual Foil) tube shape, adjustable top tube IsoSpeed, invisible cable routing, 3S aero chain keeper, T47 BB, DuoTrap S compatible, flat mount disc, 142x12mm thru axle FORK Madone KVF full carbon, tapered carbon steerer, invisible cable routing, flat mount disc, carbon dropouts, 12x100mm thru axle WHEEL FRONT Bontrager Aeolus Pro 51, Tubeless Ready, 100x12mm thru axle WHEEL REAR Bontrager Aeolus Pro 51, Tubeless Ready, SRAM XD-R driver, 142x12mm thru-axle SKEWER FRONT Bontrager Switch thru axle, removable lever SKEWER REAR Bontrager Switch thru axle, removable lever TIRE Bontrager R3 Hard-Case Lite, aramid bead, 120 tpi, 700x25c SHIFTER SRAM Force eTap AXS, 12 speed FRONT DERAILLEUR SRAM Force eTap AXS, braze-on REAR DERAILLEUR SRAM Force eTap AXS, 36T max cog *Crank Size: 47 SRAM Force AXS Power Meter, 48/35, DUB spindle, 165mm length Size: 50, 52 SRAM Force AXS Power Meter, 48/35, DUB spindle, 170mm length Size: 54, 56, 58 SRAM Force AXS Power Meter, 48/35, DUB spindle, 172.5mm length Size: 60, 62 SRAM Force AXS Power Meter, 48/35, DUB spindle, 175mm length BOTTOM BRACKET SRAM DUB, T47 threaded, internal bearing CASSETTE SRAM Force XG-1270, 10-33, 12 speed CHAIN SRAM Force, 12 speed *Saddle Size: 47, 50, 52 Bontrager Aeolus P2 Elite, 155mm width Size: 54, 56, 58, 60, 62 Bontrager Aeolus Elite, austenite rails, 145mm width *Seatpost Size: 47, 50, 52, 54, 56 Madone aero carbon internal seatmast cap, integrated light mount, 5mm offset, short length Size: 58, 60, 62 Madone aero carbon internal seatmast cap, integrated light mount, 5mm offset, tall length *Handlebar Size: 47 Trek Madone adjustable aero VR-CF, OCLV Carbon, invisible cable routing, 93mm reach, 123mm drop, 38cm width Size: 50, 52 Trek Madone adjustable aero VR-CF, OCLV Carbon, invisible cable routing, 93mm reach, 123mm drop, 40cm width Size: 54, 56, 58 Trek Madone adjustable aero VR-CF, OCLV Carbon, invisible cable routing, 93mm reach, 123mm drop, 42cm width Size: 60, 62 Trek Madone adjustable aero VR-CF, OCLV Carbon, invisible cable routing, 93mm reach, 123mm drop, 44cm width HANDLEBAR TAPE Bontrager Supertack Perf tape *Stem Size: 47, 50, 52, 54 Trek Madone aero, invisible cable routing, 7 degree, 90mm length Size: 56, 58 Trek Madone aero, invisible cable routing, 7 degree, 100mm length Size: 60, 62 Trek Madone aero, invisible cable routing, 7 degree, 110mm length BRAKE ROTOR SRAM CenterLine X, centerlock, round edge, 160mm ELECTRONICS SRAM Etap Battery Pack w/ Charger
