Lms-STF series heat pressed silicon rubber sheet Product features: 1.Extremely high heat transfer, heat resistance and buffer. 2. Not to FPC, Glass and other damage. 3. The heat has super stable characteristics and the pressure on the product consistency. 4. High resilience and non-stick. 5. Antistatic, no powder on the surface. Product specifications: 1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m). 2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg. 3, the products are divided into common type SG (gray) and anti-static SGB (black). 4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand. Product application: COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc.. Product application: application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role. Specifications: Thickness:0.2mm~0.45mm Width:8mm~600mm Length:5m~30m Sizeï¼?Customer Size Accepted Packaging Details:As customer requried Color:Grey and Black Hardness(Shore A):75~80 Surfaceï¼?Matte Use Temperature(â??)ï¼?-60~320 Volume Independence(Ω.cm)ï¼?10^8--10^12 Thermal Conductivity(w/mk):0.5~0.73 Elongation(%):165~180 Tensile Strength(Mpa):6.0~7.3 Compression(Max%):26~30
Lms-STF series heat pressed silicon rubber sheet Product features: 1.Extremely high heat transfer, heat resistance and buffer. 2. Not to FPC, Glass and other damage. 3. The heat has super stable characteristics and the pressure on the product consistency. 4. High resilience and non-stick. 5. Antistatic, no powder on the surface. Product specifications: 1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m). 2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg. 3, the products are divided into common type SG (gray) and anti-static SGB (black). 4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand. Product application: COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc.. Product application: application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role. Specifications: Thickness:0.2mm~0.45mm Width:8mm~600mm Length:5m~30m SizeCustomer Size Accepted Packaging Details:As customer requried Color:Grey andBlack Hardness(Shore A):75~80 SurfaceMatte Use Temperature(â??)-60~320 Volume Independence(Ω.cm)10^8--10^12 Thermal Conductivity(w/mk):0.5~0.73 Elongation(%):165~180 Tensile Strength(Mpa):6.0~7.3 Compression(Max%):26~30
Lms-STF series heat pressed silicon rubber sheet Product features: 1.Extremely high heat transfer, heat resistance and buffer. 2. Not to FPC, Glass and other damage. 3. The heat has super stable characteristics and the pressure on the product consistency. 4. High resilience and non-stick. 5. Antistatic, no powder on the surface. Product specifications: 1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m). 2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg. 3, the products are divided into common type SG (gray) and anti-static SGB (black). 4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand. Product application: COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc.. Product application: application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role. Specifications: Thickness:0.2mm~0.45mm Width:8mm~600mm Length:5m~30m Sizeï¼?Customer Size Accepted Packaging Details:As customer requried Color:Grey andBlack Hardness(Shore A):75~80 Surfaceï¼?Matte Use Temperature(â??)ï¼?-60~320 Volume Independence(Ω.cm)ï¼?10^8--10^12 Thermal Conductivity(w/mk):0.5~0.73 Elongation(%):165~180 Tensile Strength(Mpa):6.0~7.3 Compression(Max%):26~30
Lms-STF series heat pressed silicon rubber sheet Product features: 1.Extremely high heat transfer, heat resistance and buffer. 2. Not to FPC, Glass and other damage. 3. The heat has super stable characteristics and the pressure on the product consistency. 4. High resilience and non-stick. 5. Antistatic, no powder on the surface. Product specifications: 1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m). 2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg. 3, the products are divided into common type SG (gray) and anti-static SGB (black). 4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand. Product application: COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc.. Product application: application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role. Specifications: Thickness:0.2mm~0.45mm Width:8mm~600mm Length:5m~30m Color:Grey and Black Hardness(Shore A):75~80 Surface Matte Use Temperature( ) -60~320 Volume Independence( ©.cm) 10^8--10^12 Thermal Conductivity(w/mk):0.5~0.73 Elongation(%):165~180 Tensile Strength(Mpa):6.0~7.3 Compression(Max%):26~30
1) Product Name : auto double shafts pvc tape cutting machine Function: This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting. Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material. You can cut different sizes according to different material. 2) Main Technical Parameters: 1. Valid width:1.3M/ 1.6M 2. Max cutting diameter: 200mm 3. Min cutting:200mm 4. I.D of paper core:25-76.2mm 5. Blade diameter: 200mm/250mm 6. Air pressure: 6kg/Cm2 7. Power:10 HP 8. Voltage : 3 phase 380V/50HZ as customized 3) Advantage 1. Economical machine 2. High working speed 3. Less labor need FEATURES : 1. AC motor with frequency inverter.Make sure the steady cutting speed. 2. Big size color LCD touched panel with English language.You can set up various cutting mode and monitor the cutting job directly in it. 3. The PLC programmable controller.You can cutting various sizes in same log roll. 4. Mitsubishi servo motor and high accuracy ball screw and linear slide rail.To make sure the accurate cutting size. 5. Mitsubishi servo motor and hydraulic motor for optional. It can be anthropomorphized as three-step feeding speed of the cutter. To improve cutting efficiency and get best quality. 6. Mitsubishi servo motor control.To calculate the blade angle, according to different type materials. No need change blade. (angle range: + / -8 ° ) . That will increase the production efficiency.
Johnson stainless steel Slot Continuous screen for sand control (customized): Johnson Wedge wire screen also be named Vee-Wire screen pipe,Continuous slot Vee-wire screen tube,Water well screen, Wire wrapped screen,Wire wound screen,water filter, etc. It is made up of Vee-shaped wrapped wire and round rod in each intersection,welded together. Accurate slot and high filtration precision. 1.Name: stainless steel Slot Continuous screen for sand control (customized) 2.Material details: stainless steel 304 316L, carbon steel, 3.Hole Shape: Vee shaped 4.Slot size: 0.02mm~15mm, Customized 5.Length: up to 6m, Customized 6.Color: Original Matel color 7.Application: water well screen, filter, mining, coal, petroleum, fertilizer, grain 8.Wire shape: V type wedge wire 9.connection type: weld/thread/flange 10.surface treatment: galvanzied or coating 11.End Connection: Plain, Beveled or Thread Coupling 1.Inroduction: The welded stainless steel water well screen is made up of support wire and filter wire. with the material of stainless steel 302,304,316,304L,316L. 2.Component: The support wires can be round wires, triangular wires or trapezoidal wires, while the filter wires is triangular wires(V shape wires). 3.Characteristics: precise aperture size, high filter precision,firm structure, high-temperature resistance, corrosion resistance and mechanical performance is good,long service life, safe and reliable, etc. Can be used in various media filtration and screening. 5.Application of Wedged wire screen/Johnson screen pipe/Water Filter tube: Separating , filtering; Dewatering; Classifying; Straining , drying ; Water intak; 6.Feature of Vee type Johnson slotted wire screen tube: Non-clogging surface. Large open area. Low pressure drop. Hydraulic efficiency. High flow rates. Mechanical strength. Abrasion-resistant. Easy cleaning.
Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips Product Description PORON is a fine pitch open cell urethane foam produced by Rogers Corporation. The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns. Poron Foam tape Features: Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required. Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices. Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications. Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface. Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies. Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side. Poron Foam tape Applications: Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications. For Sealing, Gasketing, and Cushioning.
JIS F7371 bronze swing check valves 5K 50A JIS F7371 5K Marine Bronze Swing Check Valve JIS F7371 Marine Swing Check Valve 5K Swing check valve JIS Marine Brass F7371 5K-20A Swing Check Valve JIS Marine Brass F7371 5K-32A Swing Check Valve Marine Bronze Swing Check Valve JIS F7371 5K (DN50-DN80) Marine Bronze Swing Check Valve JIS F7371 5K for sale JIS 5K 50MM swing check valve F7371 JIS F7371 5K40 Bronze Swing Check Valve with good price JIS Marine Brass F7371 5K-50A Swing Check Valve Check Valve Swing check valve Bronze swing check valve JIS F7371 dn50-80 Standard Materials body              bc6 bonnet bc6 seat bc6 disc bc6 gasket non-asbestos DN d L D C NO. h t H 5K50 50 190 130 105 4 15 16 97 5K65 65 220 155 130 4 15 18 119 5K80 80 250 180 145 4 19 18 129 Technical servicing: Available Specification of JIS F7371 check valve Nominal Pressure: 5K Nominal Diameter: DN15-DN80 Standard: JIS F7371 Actuation ways: Automatic and pneumatic, the main role is to prevent the backflow medium Medium: Fresh water, sea water, air, oil, steam etc
Product name: S type force sensor Features: 1. Miniature s type tension load cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical specification: Rated output 2.0/3.0 ± 10% mv / v Zero balance ±2 % f.S. Non-linearity 0.05% f.S. Hysteresis 0.05% f.S. Repeatability 0.05% f.S. Creep (30min) 0.05% f.S. Temp. Effect on output 0.03% f.S. / 10ºc Temp. Effect on zero 0.03% f.S. / 10ºc Input impedance 385±5 Output impedance 350±3 Insulation resistance 5000m/100vdc Recommended excitation 5-10v Maximum excitation 15 v Compensated temp range - 10 ~ 60 ºc Operation temp range - 20 ~ 80ºc Safe overload 150% Ultimate overload 200 % Cable size 53m Wiring Red: + excitation black: - excitation Green: + signal white: - signal.
Product name: S type force sensors Features: 1. Miniature s type tension load cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical specification: Rated output 2.0 â± 10% mv / v Zero balance ±2 % f.S. Non-linearity 0.05% f.S. Hysteresis 0.05% f.S. Repeatability 0.05% f.S. Creep (30min) 0.05% f.S. Temp. Effect on output 0.03% f.S. / 10âºc Temp. Effect on zero 0.03% f.S. / 10âºc Input impedance 350â±5, Output impedance 350â±5, Insulation resistance 5000m, /100vdc Recommended excitation 5-10v Maximum excitation 15 v Compensated temp range - 10 ~ 60 âºc Operation temp range - 20 ~ 80âºc Safe overload 120% Ultimate overload 150 % Cable size Ã?4ã?3m Wiring Red: + excitation black: - excitation Green: + signal white: - signal.
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Rated output 2.0 ± 5% mV / V Zero balance ±2 % F.S. Non-linearity 0.03% F.S. Hysteresis 0.03% F.S. Repeatability 0.03% F.S. Creep (30min) 0.03% F.S. Temp. effect on output 0.025% F.S. / 10ºC Temp. effect on zero 0.025% F.S. / 10ºC Input impedance 350±5Ω Output impedance 350±5Ω Insulation resistance �5000MΩ/100VDC Recommended excitation 5-10V Maximum excitation 15 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Cable size �5�3m Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Capacity 10~5000kg Rated output 2.0 ± 10% mV / V Zero balance ±2 % F.S. Non-linearity 0.03% F.S. Hysteresis 0.03% F.S. Repeatability 0.03% F.S. Creep (30min) 0.03% F.S. Temp. effect on output 0.025% F.S. / 10ºC Temp. effect on zero 0.025% F.S. / 10ºC Input impedance 350±5Ω Output impedance 350±5Ω Insulation resistance �5000MΩ/100VDC Recommended excitation 5-10V Maximum excitation 15 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Cable size �5�3m Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal capacity A B C D M Weight 10/20/30/50/75KG 63.5 50.8 12.7 19 M8*1.25�1/4-28� 100/200/250/300/500KG 76.2 50.8 19.1 25.4 M12x1.75�1/2-20� 750/1000/1500KG 76.2 50.8 25.4 25.4 M12x1.75�1/2-20� 2000/3000/5000KG 108 76.2 25.4 25.4 M18x1.5�3/4-16�
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Capacity 50kg,100kg,200kg,300kg,500kg Rated output 2.0mV / V Zero balance ± 2 % F.S. Non-linearity 0.1 % F.S. Hysteresis 0.1 % F.S. Repeatability 0.1 % F.S. Creep (30min) 0.1 % F.S. Temp. effect on output 0.05 % F.S. / 10ºC Temp. effect on zero 0.05 % F.S. / 10ºC Input impedance 1100±5Ω Output impedance 1050â±3î© Insulation Â?¥5000mî©/100vdc Recommended Excitation 10 V Maximum Excitation 20 V Compensated Temp Range - 10 ~ 60 ºc Operation Temp Range - 20 ~ 80âºc Safe Overload 150% F.S. Ultimate Overload 200 % F.S. Cable Size Ã?3ã?3m Wiring Connection Red: + Excitation Black: - Excitation Green: + Signal White: - Signal Range, Size, Thread Lb, Kg, A, B, C, Mm, Inch 250-150, 100-750, 70, 19, 80, M10*1.5, 1/2-20 2000-3000, 1000-1500, 70, 25, 80, M12*1.75, 1/2-20 5k-10k, 2000-5000, 108, 25, 95, M18*1.5, 3/4-16 20000, 10000, 175, 51, 130, M30*2, 11/4-12 40000, 20000, 190, 60, 160, M39*2, 11/4-12
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.