Al-CCL standard size is 1000*1200mm(40*48 inch),thickness from 0.4mm to 4mm.Thermal conductivity include 0.5,1,1.5,2.0W.And all our products have been compiled series with all complete specifications. Aluminium copper clad laminats is widely used for the modifier and sparker on fire for motorcycle and mobile, power LED, sound box, power supply module and acoustics shielding system etc. Copper Thickness:18um,25um,35um,70um Board Thickness: 0.4mm, 0.8mm,1mm,1.2mm,1.5mm,1.6mm Film: Blue/Green or without any film Brand:Chifeng Material: Aluminium Core+copper Application: LED lamp Side: Single side
Engine features: Certified by the Environmental Protection Agency (EPA) to conform to Tier III marine auxiliary standards. Closed cooling system Heat exchanger Oil drain valve Generator features: Remote start 12-pin connector Voltage regulation of ±1.0% Rotor and stator are coated with a high-bond epoxy varnish. Varnish helps prevent corrosion in high-humidity areas. Copper windings ensure minimal heat buildup. Insulation meets NEMA standards for class H insulation. Direct connected to the engine, the generator has sealed precision ball bearings with a precision-machined steel sleeve in the end bracket to prevent shaft misalignment and extend bearing life.
High stiffness, High efficiency, Best performance Turning & milling at once. Built in direct motor spindle. Servo Turret with 8 stations. 45 chuck 4+4 live tools with Y axis. Roller linear guide way. Max. swing dia./mm: â??560 Max. turning dia. (Servo knife tower )/mm: 45 X axis/mm: 350 Z axis/mm: 340 Direct driven spindle(built-in motor)/kw: 11.7 Machine total power/kw: 18 Machine Size(L*W*H)/mm: 1900x1650x1820 SYNTEC system 22TA
Product Introduction ROTO Gravure Engraving machine for rotogravure cylinder used in gravure cylinder making industry. applied in packaging of plastic, room decoration, press printing, textiles, wood, cigarette packet, leather etc. rotogravure engraving machine adopts Germany complete servo control, which ensures steadily and high engraving efficiency Product Advantage: Steadily and high engraving efficiency Low costs of maintenance and simple maintenance and repair Integrated PC operation console, easy operation Clear outline and plentiful arrangement Online cell camera system Cell variation range less than 2 microns Working Capacity
Smooth HDPE geomembrane liner, also known as high density polyethylene geomembrane liner, is the very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid or gas migration in a human-made project, structure, or system. GEOSINCERE brand smooth HDPE geomembrane liner is made from finest quality virgin high density polyethylene (HDPE) with specially formulated, combined with specified quantity carbon black, antioxidant, anti-aging agent and UV resistance components, which makes our geomembrane product with excellent resistance to UV radiation and is suitable for exposed conditions.
A Globe Control Valve is a type of linear motion valve primarily used to regulate fluid flow in pipelines. It consists of a movable disk (or plug) and a stationary ring seat in a globe-shaped body. By raising or lowering the plug, the valve controls the flow rate. Globe valves are versatile and suitable for various applications, including throttling and isolation services in industries such as oil and gas, chemical processing, and power generation. Their design allows for precise flow control, making them essential components in process control systems where accurate regulation of flow, pressure, or temperature is required. You'll be interested in China Manufacturers.
Style : office floor tiles construction: Multi-leve lloop pile Yarn : 100% universal nylon 6 color system: 100% solution dyed Gauge: 1/10" Stitches: 10 per inch pile weight: 19 oz/sq.yd pile height :2.5-6.5mm (+/-0.5mm) Backing: PVC with fiberglass Tile size: 25 x 100cm Area of use: Heavy commercial Flammability: ASTM E648-10 Class I , GB8624-2012, B1 Smoke density: ASTM E662 Lessthan 450 Static propensity: AATCC-134 < 3.5kv Static control: life of the carpet static protection Formaldehyde purification:JC/T 1074-2008,class I
Product Details: Detailed Product Description Material :100% Nylon Style : Plain Pattern : Loop Pile Design : null of pattern Technics : Machine Tufted Use: meeting room , office ,school , bank ,ie Advantage : Non-fading,Comfortable Feature : Corrosion-Resistant Total Colors : 64 Color : Red, Grey,Black,Blue,Orange,Brown,Green Color system: 100%Solution Dyed Stitches: 11 per inch Gauge:5/64 Pile weight:17 oz/sq.yard Pile height: 2.5mm-5mm (+/-0.5mm ) Backing:PVC with fiberglass Tile size:50*50cm Area of use:Heavy commercial Flammability:Passed Static control:Life of the carpet static protection
Produced specifically for the industrial air conditioning system, the industrial copper tube Class 0 is a superior product line of Abc Tube Company which is suitable for the R410A, R32, withstand high working pressure. The industrial copper tube Class 0 is in conformity with the American standard ASTM B280 for Air Conditioning and Refrigeration Field. The minimum thickness of the product is 0.81mm for the tube with OD: 6.35mm, 9.52mm v 12.70mm and is 1.00mm for the tube with OD: 15.88mm, 19.05mm. Packing: Each coil is packed in one single bag with grain moisture inside. The copper tube is printed with the companys name: along with the size and ASTM B280 standard.
Specification of Kitagawa detector tubes/KITAGAWA gas detection system 201SB Tube No.: 201SB Substance to be measured: Chloride ion Measuring Range: 3-200ppm Shelf life: 2 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
High Speed Linear Actuator High-speed linear actuators offer rapid and precise linear motion with quick response times. Engineered with high-speed motors and advanced transmission systems, they are used in robotics, automation, and aerospace. These actuators enhance productivity, reduce cycle times, and deliver efficient performance in applications requiring fast and accurate movement. Types of High Speed Linear Actuator DDTG-55 High Speed Tubular Linear Actuator The DDTG-55 Tubular Linear Actuator is a compact and reliable device for linear motion applications. DDTG-55Z High Speed Tubular Linear Actuator The DDTG-55Z High Speed Tubular Linear Actuator is a fast and efficient linear actuator designed for applications that require quick response times and high-speed movements. Understanding the Mechanics of High Speed Linear Actuators Fast linear actuators are engineered to provide rapid and efficient linear motion in applications that require quick response times and fast movements. To understand their mechanics, it's important to consider their key components and operating principles. These actuators generally feature a high-speed motor that generates the necessary torque and speed for rapid movement. The motor is typically paired with a transmission system, such as a ball screw or lead screw mechanism, to convert the rotary motion of the motor into linear motion. The transmission system plays a crucial role in achieving high speeds while maintaining precision and accuracy. It translates the rotating motion of the motor into linear movement by utilizing a screw and nut assembly. The precise thread pitch of the screw ensures smooth and consistent linear translation.
Dolph Microwave manufactures a high quality line of microwave phase shifter, which is utilize hybrid design, making it ideal for high power and low loss. The phase shift is approximately linear with dial rotation, but not frequency. which can change the phase of the signal in the waveguide transmission system within the range of 0 to 360�°. Please call us with your specification and discuss your needs with one of our sales engineers. Note: Take an example of WR112 High Power Waveguide Phase Shifters Waveguide phase shifter types Dolph Microwave excels in waveguide technology, offering advanced solutions in the realm of RF waveguide phase shifters. The company distinguishes itself through its expertise in two fundamental types of waveguide phase shifters. Analog Phase Shifters: Dolph's analog phase shifters utilize an analog signal, typically voltage, to alter the output phase of a signal. This technology enables continuous and precise control over phase adjustments, allowing for seamless modulation in various applications. The analog approach is particularly advantageous when fine-tuning phase shifts is critical for optimal performance in communication systems, radar applications, or other microwave-dependent technologies. Digital Phase Shifters: In contrast, Dolph's digital phase shifters operate using a digital signal comprising two discrete stages. This method facilitates discrete phase adjustments in a step-wise fashion. Digital phase shifters are known for their reliability and accuracy, making them suitable for applications where discrete and quantized phase shifts are sufficient. Dolph Microwave's commitment to providing a diverse range of waveguide phase shifter options, whether analog or digital, underscores its dedication to meeting the nuanced requirements of modern RF communication systems with cutting-edge technology.
Electroplating wastewater include the pretreatment rinsing wastewater, plating rinsing wastewater. And the principal pollutants are heavy metal ion . 1.1 Up-to-standard discharge technology The emission of waste water which contains heavy metal ions such as Cr, Cu and Ni must meet the local requirements by adopting the means of Physical and Chemical Reaction + Sequencing Batch Precipitation + Ion Exchange + Compulsory Filtration to reach the standard. 1.2 Electroplating wastewater reuse technology Electroplating wastewater reuse technology means to add reclaimed water reuse system and reuse system on the basis of standardized discharge technology. The effluent can meet reclaimed water reuse standards(such as cleaning). 1.3 Electroplating wastewater zero-discharge technology MVR evaporator Working principle: MVR evaporator will increase the energy of secondary steam by using compressor, and will take advantage of the secondary steam with improved energy to recycle the potential heat of secondary steam. Specifically: Increase the pressure and temperature of the secondary steam generated by evaporator through the adiabatic compression in compressor, and after that, the steam will be fed into the heating chamber of evaporator (heat exchange system) as the heating steam, thus the potential heat of steam can be reused. The cold material will absorb the heat of non-condensable gas through preheating exchanger before being sent into evaporator, so the temperature of the cold material will increase, meanwhile, the condensate can be cooled by this material. This can further improve the utilization ratio of heat.
Features JOEO Walk-in Chambers' Panels we use have a stainless steel interior skin to be stronger and impervious to extreme conditions,Nominal 4-inch (about 100mm), rigid urethane insulation(thicker panels are optional) Seams between panels are carefully sealed to protect from leaking that may affect performance or damage the panels Multiple Plenum Options for Greater Flexibility Interior lighting provided in vapor-proof fixture with external control switch (specialty lighting systems available) Door hardware includes cam lift, self-closing, chrome plated hinges and a lockable chrome-plated door latch with inside safety release;Doors and windows have embedded heaters Floor loading of up to 600kg per square foot. (More weights available as option) JOEO walk in climatic chamber Optional heavy duty floors sloped to perimeter drains Temperature and Humidity Control If you have any questions, please visit our official websiteï¼?https://www.chamber-testing.com/ JOEO constant temperature test chamber Control systems are designed with the proper heating, refrigeration, and humidity control to achieve your desired performance and capabilities. The Control systems of walk in chamber simply rolls-up to an assembled panel chamber to complete installation. Also,touch-screen controller can be managed remotely via our new Ethernet/LAN-based Web Controller, serial port, or GP-IB/LabView. USB access is standard.
Description: The Micro Drilling products cover semiconductor materials, metals, ceramics and polymers. Each product has laser and beam delivery design optimized for a specific application, and can be configured for manual or automatic operation, allowing customers to buy exactly the application solution they need. PCD Micro Drill is used in the Semiconductor industry, National defense field, Aerospace, Chip & Communication electronics, Details Specificationï¼? PCD MICRO DRILL SLOT STRUCTURE AND DRILL TIP 1. The grinding groove is smooth and the chip removal is excellent; 2. The edge surface is polished and the main edge is sharp; 3. The tip rotates stably and the hole position is accurate The Micro Drilling products cover semiconductor materials, metals, ceramics and polymers. Each product has laser and beam delivery design optimized for a specific application, and can be configured for manual or automatic operation, allowing customers to buy exactly the application solution they need. PCD MICRO DRILLS FEATURES 1. PCD micro drill has characteristics of high hardness, wear resistance, and relatively long service life compared with traditional alloy microdrill; 2. PCD micro drill is widely used in addition to processing metal materials, and can also be used for inorganic non-metallic material processing, with high processing precision; 3. PCD micro drill, compared with traditional alloy micro drill, can process hole walls with better quality. Improved Tool Life Improved Productivity Improved Hole Quality Reducing Your Machining Time PCD MICRO DRILLS STANDARD Highest technology laser manufactured micro PCD drills. Micro PCD drills are used in the semiconductor industry for monocrystalline applications such as cleaning and inspection jigs. They are also used for the graphite electrode manufacturing for EDM and drilling very hard to machine materials in the die & mold industry. Designed with superb surface quality and edge sharpness. Multiple scale tool life as compared to standard carbide coated micro drills. Other dimensions are available per request. Models: Applications of High Precision Micro PCD Drill: Micro Drilling Systems are used in the microelectronics, microfluidics, semiconductor, LED, medical devices, and PV industries. The systems combine precision part-moving stages, high-resolution alignment systems and application-optimized lasers with IPGs proprietary software to provide high-throughput and high drilling accuracies. Application Cases of High Precision Micro PCD Drill : Advantages of High Precision Micro PCD Drill: Pack: Cartons and bubble wrap Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided Certification: ISO9001:2008 FOB Port: Shanghai Qingdao Guangzhou
9060/1390/1610 LASER CO2 6040 ENGRAVING CUTTING MACHINE This serial CO2 laser engraving cutting machine is with a smaller work size and 1 laser head. They are common styles in the current market and are most widely used in practical applications. They are good at engraving and cutting nonmetal materials, such as acrylic, wooden boards, paper, bamboo, dual-color boards, and other non-metallic materials. Compact structure, easy to move. 6040/9060/1390/1610 CO2 LASER ENGRAVING CUTTING MACHINE TECHNICAL PARAMETERS Model WH-1390 Work size 1300*900mm Machine size 1820*1320*1020mm Laser head quantity 2 Pcs Laser power 60w/80w/100w/130w/150w (Optional) Work table Blade table/Honeycomb table Engraving speed 0-60000mm/min Cutting speed 0-30000mm/min Driving system Stepper motor Resetting positioning accuracy 0.01mm Laser tube cooling Water cooling Max power About 1kw Machine control DSP controlling Power supply AC 110 - 220V, 50 - 60Hz Min. shaping character Chinese 2mm*2mm, English 1mm*1mm Supported graphic BMP, PLT, DST, DXP, and AI Software supported CorelDraw, AutoCAD, Photo shop Operating temperature 0â??ï½?45â?? Operating humidity 5%ï½?95% Standard assistant parts 550W Exhaust fan*2units Water pump*2units 195w air compressor*2units Optional parts CW3000w/CW5000/CW5200 chiller Motorized up down table Autofocus Red dot pointer Rotary axis Servo motor Features of 6040/Laser 9060/1390/1610 Co2 Laser Engraving Cutting Machine 01 The appearance is humanized in design, with front and rear material access and omni-directional wheel movement, making your production and processing more flexible. 02 This non-metal cutting machine adopts high-frequency uniform power 60W/80W/100W/150W/CO2 laser, capable of continuous 24-hour uniform output and strong anti-interference ability. 03 The machine adopts Ruida 6445G control system, which is mature and stable, supports offline USB usage, and is more convenient to use; It also has a breakpoint resume function. 04 It adopts linear guide rails from Taiwan, ensuring smooth motion trajectory and high speed accuracy. 05 The optical system utilizes II-VI high-transmittance focusing lenses and high-quality reflector mirrors, ensuring a finely constant beam, large cutting depth, and high engraving precision.
Application Benchtop temperature chamber can meet certain quality standards and testing specifications ,for example: Daily necessities, cosmetics, electronic components, and medical products .� Most ideal designed for temperature and humidity testing of small samples and specimens used for research, development and quality control.� This dimension are very cute. customer can fit on a personal desk is the most consideration.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com Feature: Our JOEO Benchtop Temperature Chamber's window is equipped with an anti-sweat electric heater device to prevent water vapor from condensing and water droplets, and high-brightness PL fluorescent lamps keep the interior of the box illuminated;Rectangular multi-layer glass viewing window, which can be used to observe the test items during the test.� With automatic-water supply system, it is convenient to supplement the water supply of the humidification barrel, and it can be recycled and used automatically. High-quality appearance, the body adopts an arc shape, the surface is treated with matte stripes, and the flat non-reaction handle is adopted, which is easy to operate, safe, and reliable. High quality original compressor circulation system adopts the French â??Tecumsehâ??& Germany "Bitzer" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerants (R23, R404, R507). Double-layer insulation of ess chamber door is tight and airtight, which can effectively isolate internal temperature leakage.� Built-in moving pulley is easy to move and place and has a strong positioning screw to fix the position. Controller has multi-segment program editing and temperature, and humidity can do fast (OUICK) or slope (SLOP) control. Self-developing controller system adopts an imported LCD screen, which can display the measured value, set value, and time at the same time. Announcements: Do not place the sample in the oven heating state, and place the sample in the state of ensuring that the heating is off;� When placing the sample, there should be a certain space around the upper and lower parts to keep the air flow in the box smooth; There is a cooling plate on the heating wire at the bottom of the chamber, and the sample can not be placed on it, so as not to affect the heat flow and lead to heat accumulation; If the sample will have a phase change at high temperature, it must be packed in a tray to avoid contaminating other samples (for example, it will leak oil or change from solid to liquid after heating); Containing flammable and explosive organic volatile solvents or auxiliaries shall not be put into the chamber.
Preset (autom. paper size and thickness setting) - CPC 1.04 + CPtronic - Machine control and diagnosis console (Remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and memory card for job memories) - Programmable automatic blanket cylinders wash up - Programmable automatic impression cylinders wash up - Programmable automatic rollers wash up - Autoplate (semi automatic plate loader) with Bacher Control 2000 register system (425mm) - Chromed impression cylinders - Chromed plate cylinders - Chromed blancket cylinders - Pneumatic compressors - Powder sprayer device - Low pile - Automatic sheet de-curler - 2 delivery trolleys - Minuss version (Not prepared for numbering) - Oil drip pan, Tools, Documentations - Complete with all standard parts and accessories - plate punch and bender
An economic value model, reliable, high performance, high stiffness, heavy cutting, 30degree slant CNC LATHE Can realize single workpiece processing or working with bar feeder or gantry loader to do machining automatically and continuously. High stiffness, High efficiency, Best performance Built in direct motor spindle Servo turret with driven tools at 12 stations Roller linear guide way Tailstock Max. bar feeding dia./mm: 45 Spindle bore dia./mm: 56 Spindle nose: A2-5 Direct driven spindle(built-in motor)/kw: 11.7 Number of knives/pcs: 12 Machine Size(L*W*H)/mm: 2190x1585x1685 Net weight/kg: 2800 SYNTEC system
Product Introduction Automatic Marking Machine For Cylinder Making can print clear, standardized and firm marks on the printing cylinder. The marking content can be any letter, number, symbol, etc., and the editing is convenient and flexible. The gravure cylinder marking machine has stable and reliable performance, and is easy to operate and maintain. It is a professional equipment developed by our company for the rotogravure cylinder and printing industry. Product Advantage Printing cylinder marking machine Under the control of our company's customized software, the rotogravure printing cylinder marking head drives the needle through the two-dimensional workbench to perform high-frequency vibration through the pneumatic system to print a clear and complete cylinder number and other content at the center of the engraving cylinder end face.