UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
Xiongcai E3 motor control (ESC) with 400A, 12S, 54V Power System The Xiongcai E3 motor controller (electronic speed control, ESC) is packed with a potent combination of hardware and software advancements. This product is designed for high-level R/C car sport. 12S LiPo batteries, 400A continuous current, 54V, the power system will push your vehicles to their limit and beyond. MAYBE itâ??s the most powerful ever in motor control of R/C car and truck. Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. a. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. b. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. c. The brake force and reverse force is programmable for enhancing drivability. d. Thermal management is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the motor controller (electronic speed control or ESC) design and manufacture for 15 years, and committed to promoting drivability of R/C model cars. Xiongcai team is capable of excellent RD ability and committed to creating powerful reliable motor control, if you have any special requirements on your motor control, we will help you achieve your ideas.
Product Description Designed for the inshore angler. The Revo Inshore Generation 3 baitcasting reel is durable with a highly anti corrosive frame and bearings. Fight large inshore species with the new extended handle with large EVA knobs on this reel. This reel is newly designed to be more compact, which allows for additional line capacity without an increase in the reel width. This Abu Garcia reel also comes equipped with D2 Gear design, this is the new next generation of Duragear. The Duragear provides more efficient gear system while improving overall durability as well. The Revo Inshore sideplates are precision engineered with C6 carbon sideplates for signifigant weight reduction without having to give up strength or durability. The Pitch Centrifugal brake utilizes, 6 brake blocks (3 spring loaded and 3 non spring loaded). The spring loaded brake blocks act only when the spool is under high revolution (1st part of the cast) and will then disengage to give maximum distance. The non spring loaded brake blocks act on the entire cast to give maximum control throughout the cast. Features: 6 High Performance Corrosion Resistant (HPCR) bearings + 1 roller bearing provides increased corrosion protection X2- Cr�¤ftic alloy frame C6 carbon sideplates Carbon Matrix drag system provides smooth, consistent drag pressure D2 Gear Design Pitch centrifugal brake system Large EVA knobs provide improved grip Extended bent handle for increased cranking power Ti coated line guide reduces friction and improves durability Dual anti reverse Branch Office Shop Fishing Tackles Jl. Jend. Sudirman kav. 112 - 114 Jakarta - 12190 Indonesia
Strawberry agricultural production project with hydroponic system Cayman Island George Town Project for fish purchase and Cayman collection center Bolivia Tarija Blueberry agricultural production project with Hydroponic system Colombia Bogota Production and marketing of roasted coffee with hemp infusion in the USA Colombia Cohello Planting raw materials to contribute to food sovereignty El Salvador San Miguel Acquisition and reactivation of the Mill containing a Coffee Processing Plant El Salvador San Miguel Construction and start-up of a dehydrated instant food production plant Guatemala Guatemala Acquisition and reactivation of the Mill containing a Coffee Processing Plant Guatemala San Marcos Banana cultivation in Guatemala Guatemala Guatemala Projects for the development of legumes and vegetables Honduras Cortes Fish Concentrates or Feed Plant (PAP) Honduras Cortes Tilapia Processing Plant for industrialization Mexico Manzanillo Coconut cultivation Mexico Manzanillo Cultivation of Petac�³n Mango and its varieties Mexico Manzanillo Persian Lemon Processing Plant Panama Panama Hydroponics in the valleys of Anton 5 ha (Guandu, Peas, Chard) Peru Amazonia Construction of a collection center for the development of local production Surinam Paramaribo Coconut cultivation and purchase Surinam Paramaribo Waterlogged Rice Cultivation Surinam Paramaribo Cultivation of Adjuma Chili Pepper Venezuela Lara Production of eggs for consumption with chickens Venezuela Lara Diesel Engine Assembly Plant Venezuela Lara Enabling a new line of dehydrated instant foods in a processing plant Venezuela Falcon Melon planting in Falcon Paraguana Venezuela Tachira Diversification and improvements of agricultural production in the Seboruco Venezuela Tachira Tomato and Paprika agricultural production project with hydroponic system Venezuela Tachira Diversification and improvements of coffee production in the C�³rdoba
A pneumatic piston pump, also known as an air-operated diaphragm pump, is a type of positive displacement pump that utilizes compressed air or gas to transfer fluids. It is widely used in various industries for pumping liquids with varying viscosities, including chemicals, paints, adhesives, sludges, and more. The pump operates based on the reciprocating action of a piston driven by pneumatic pressure, allowing for efficient and reliable fluid transfer. The working principle of a pneumatic piston pump can be broken down into several key steps: Pneumatic pressure supply: The pump is connected to a source of compressed air or gas, typically at a regulated pressure. This air supply acts as the driving force for the pump's operation. Air distribution system: The pump is equipped with an air distribution system, consisting of control valves, air chambers, and diaphragms. These components regulate the flow of compressed air into specific areas of the pump to initiate and control the reciprocating motion of the piston. Intake stroke: When the compressed air is directed to the appropriate chamber, it pushes against the diaphragm connected to the piston. This creates a partial vacuum in the pump's inlet chamber, causing the fluid to be drawn into the pump through an inlet valve. The fluid flows into the pump's chamber as the piston moves away from the inlet, enlarging the space within the chamber. Compression stroke: As the piston reaches the end of its intake stroke, the air distribution system redirects the compressed air to the opposite side of the pump. This pushes against the diaphragm connected to the piston, causing the piston to move in the opposite direction. This motion reduces the volume of the pump's chamber, compressing the fluid inside.
AIR FORCE (19") 160CC HONDA HOVER MOWER Price:$468.90 SKU:F-19 Brand:Air Force Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Advanced Design With High Quality Materials Allows you to maximize time and effort for turf care needs Powerful 160cc Honda GCV 4-Cycle Engine Mounted in reverse to maximize oil lubrication to the engine Cup and dipper spashing system showers internal components High performance fuel pump ensures constant delivery of fuel Extra Strength Reinforcement 7-point engine mount with steel insert reinforcement Extra thick handle mounts are set low & wide for better stability 19-Inch, Injection-Molded ABS Mower Deck Coated for UV and chemical restistance Exceptionally strong yet lightweight deck enhances mower lift 14-Inch Lightweight Impeller Provides maximum lift and smoother mowing Operator Presence Control With Blade Brake Detects when operator releases their grip and cuts the engine Heavy Gauge Steel Handles 53" handle for maximum reach Padded for added comfort Not Recommended For Use On More Than A 45 Degree Angle Specifications Engine Engine Brand Honda GCV Starting System Recoil Start Engine Cycle 4-Cycle CC 160 CCs Fuel Tank Size 0.24 Gallons Engine Cylinders 1 Cylinder Oil Filter No Torque 6.9 Lbs Consumer Engine Warranty 2 Years Commercial Engine Warranty 90 Days Deck Blades 3 Blades Cutting Width 19 Inches Cutting Height .5-2.5 Inches Drive Drive System Push Overview Weight 38 Pounds Consumer Warranty 1 Year
This is a professional-grade sewing machine built for precise and efficient stitching of insoles. Its advanced disc feed mechanism and automatic lubrication system guarantee smooth operation and superior sewing results. Ideal for insole/ stroble sewing, this machine combines performance, reliability, and ease of use. Disc Feed Mechanism: The machine features a unique disc feed mechanism that provides consistent and smooth fabric feeding. This mechanism ensures even and accurate stitching of insole materials, resulting in clean and professional-looking seams. Insole Stitching Capability: The machine is designed specifically for stitching insoles and excels in handling various materials used for insole construction, such as leather, fabric, and synthetic materials. It can sew through multiple layers and thick materials with ease, providing strong and durable seams. Auto Lubrication System: The built-in automatic lubrication system ensures that the machine's moving parts are properly lubricated always. This promotes smooth operation, reduces friction, and extends the machine's life span. Regular lubrication also minimizes the need for manual maintenance. Adjustable Stitch Length: The machine allows for easy adjustment of the stitch length to accommodate different sewing requirements. You can customize the stitch length to achieve desired seam tightness and appearance. Model No. BS-600 Sewing speed 1800 s.p.m Needle Type DPx5 Stitch Length 6mm Height of presser foot 33mm Dimension 430 x 450 x 365mm Weight 33 KG No. of Needles Single needle
ZL-3 model steam air heater with upper outlet and lower inlet is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system. It is specially designed for supporting downflow drying room/heating rooms. After convert the outside steam heat to heat inside the insulation box through by the fin tube, it�´s mixing with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 5. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 6ï¼?High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
DL-2 model electric air heater with Left-Right Circulation is consists with 6 parts: electric heater + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by electric heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
Product Description Weighing in at just 4.9oz â?? a full .5 ounces lighter than the ultra-lightweight MGX â?? the MGXtreme continues the Revo legacy by pushing the limits of what is possible with design and engineering. Equipped with a 10 bearing system, the MGXtreme starts with seven stainless steel HPCRâ?¢ bearings + one roller bearing for increased corrosion protection. The addition of two CeramiLite hybrid ceramic spool bearings results in ultimate distance with effortless handling and control throughout the cast. 10 bearing system 7 stainless steel HPCRâ?¢ bearings + 1 roller bearing 2 additional CeramiLite Spool Bearings provide improved casting performance One piece X-Mag alloy frame Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range C6 carbon sideplates provide significant weight reduction without sacrificing strength and durability IVCB-IV (Infinitely Variable Centrifugal Brake) gives very precise brake adjustments allowing anglers to easily cast a wide variety of baits Infini II spool design for extended castability and extreme loads Compact bent carbon handle provides a more ergonomic design that is extremely lightweight Round EVA knob provides improved grip for improved cranking power Aircraft grade aluminum main gear provides weight reduction without sacrificing durability
Product overview 1. This product is mainly made of epoxy copolymerization of several fatty alcohols. 2. The basic properties of the foaming system are not affected due to its strong anti-foaming and anti-foaming effect. 3. Good heat resistance, stable chemical properties, no corrosion, no toxic, no adverse side effects. Technical specifications �· Appearance: Transparent liquid or light yellow liquid �· Viscosity (25�ºC) : 100 ~ 800 mPa.s �· Solids content: 100% Performance characteristics The white water in the wet end of papermaking, and the medium temperature white water system is more effective. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. Easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorret methods, our company doesn't undertake the responsibilities Packing and storage This product is packed in 25kg, 50kg or 200kg plastic drums. If you have special requirements, you can negotiate and customize. This product is suitable for storage at 0~30, and do not place it near a heat source or expose it to sunlight. Do not add acid, alkali, salt and other substances to this product. Seal the container when not in use. If there is stratification after long-term storage, stir it evenly. Generally, the effect will not be affected. According to general chemical storage methods. Ensure that it is sealed after use. Under the recommended storage temperature and unopened packaging conditions, the shelf life is 12 months from the date of production.
