Kalamata Olives Whole(With stone) Variety : Kalamata Olives Origin: Egypt Ingredient : Pitted Kalamata Natural Black olives 48%, Water 45.4%, Salt 5%, Acetic Acid 1.5% and Calcium Chloride 0.1mg. Storage Conditions: Ambient Temperature and out of directs sunlight Handling Precautions: Handle with Care GMO Status : None GMO Allergens:Free from any Allergen Pesticides: Free of Pesticides Kosher / Halal Certificate : Product is eligible for Kosher / Halal Certificate Thermal Process : Pasteurized Product Intended use: To be used for direct Consumption or after adding to Salads and for all Ages.
Nettle Urtica dioica L. belongs to the Urticaceae family, it is commonly present over entire Poland. The herb of nettle is rich in mineral components mainly silica, calcium, iron, flavonoids, organic acids (e.g. formic, acetic acid) and a large number of vitamins (A, B2, B5, C, E and K). The raw material presents traditional use as a diuretic in urinary tract inflammations, in dermal and rheumatic conditions (e.g. gout), as well as urolithiasis. In cosmetics, the herb of nettle is used to strengthen damaged and greasy hair, as well as to wash acne complexion.
Lemongrass oil is one of the well-known oil which is mainly used in the perfumery, cosmetic and pharmaceutical industries. It is also commonly used in aromatherapy and cooking due to its high medicinal content. The leaves of lemongrass are used for extraction of the oil. The plantation of lemongrass oil has a life span of 6-8 years. Globally India is one of the major producers of this oil. There are around 52 species of this plant. The species CYMBOPOGON CITRATUS is most widely used due to the high content of Geranyl acetate. it takes 66 pounds of lemongrass to make one quart of essential oil. The most common method of extraction of this oil is by steam distillation.
A common name in aromatherapy, rose geranium oil is primarily extracted from the leaves and stems of the geranium plant a perennial shrub. This pleasant smelling oil carries components which include alpha pinene, menthone, myrcene, geraniol, linalool, geranyl acetate, limonene, citronellol and geranyl butyrate. Some of the most significant benefits, uses, abilities and properties of rose geranium oil include balances hormones, alleviates stress, reduces depressive disorder, minimizes inflammation, improves blood circulation, eases the effects of menopause, improves dental wellness, brings down blood pressure, benefits the wellness of your skin and a lot of other benefits.
Primarily extracted from the jasmine flower, jasmine flower oil or simply jasmine oil is one of the widely used essential oil. Jasmine flower oil contains benzoic acid, benzyl alcohol, benzaldehyde, benzyl acetate, aromatic heterocyclic organic compound, benzyl benzoate, cis-3 hexenyl benzoate, cis-jasmone, methyl 2-aminobenzoate and many other compounds. This aromatic oil is used for a range of health conditions which include curative for improving mood, depressive disorder, anxiety, tension, loss of libido, chronic sleeplessness, improves resistance and fight infections, help in the decrement of symptoms of menopause and can be used as an effective cure for menopause and so on.
Appearance White or whitish crystalline powder White crystalline powder High-performance liquid chromatograph HPLC The retention time of test sample major peak complies to reference standard Conforms IR-infrared spectrum The retention time of test sample major peak complies to reference standard Conforms Loss on drying 1.0% 0.5% Residue on ignition 0.1% 0.06% Related impurity Total impurities:1.0% 0.59% Single impurity:0.5% Conforms Ethyl acetate 0.5% Conforms Heavy metals 20ppm <20ppm Purity 98.5% 99.41%
Textile Oils textile-industryPanama Petrochem Ltd, manufactures fine Textile Oils like Panol-KNT and Antistatic Coning Oil known for its various features such as oxidation and chemical stability. They are highly effective in improving antistatic properties as well as reducing friction of machine parts. PANOL-KNT Panol-KNT is a needle lubricant for large diameter circular knitting machines as well as for various other types of knitting machines. It is suitable for automatic oiling units commonly fixed to circular knitting machines. ANTISTATIC CONNING OILS Antistatic Conning Oils are used for texturing synthetic yarns such as viscose, acetate rayon, nylon and polyester. We supply oils of different viscosities depending on the buyer’s requirements.
GHRP-2 Quick Detail: Unit Size :5mg/vial Min: 10vials CAS NO. :158861-67-7 Synonyms :GHRP-2 Acetate Molecular Formula :C45H55N9O6 Molecular Weight :817.97 Sequence :H-D-Ala-D-2-Nal-Ala-Trp-D-Phe-Lys-NH2 Appearance :White Powder Purity :99.35% Identity (ESI-MS) :817.97±1.0 Source :Chemical Synthesis Storage :Lyophilized GHRP-2 is stable at room temperature for 90 days,however it should be stored in a freezer below -8C for any extended period of time. After reconstituting GHRP-2 should be refrigerated at temperatures not to exceed 36 F.
Ferrosilicon is a ferroalloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made of coke, steel chips, quartz (or silica) as raw materials and smelted from an electric furnace. Ferrosilicon is often used as a deoxidizer in steelmaking, and it is also beneficial to increase the temperature of molten steel while deoxidizing. At the same time, ferrosilicon can also be used as an alloying element additive, widely used in low-alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, ferrosilicon in alloy production and chemical industry, commonly used as a reducing agent
Elemental magnesium is a gray-white lightweight metal, two-thirds the density of aluminium. Magnesium has the lowest melting (923 K (650 C)) and the lowest boiling point 1,363 K (1,090 C) of all the alkaline earth metals. Mg ingot is a new type of lightweight corrosion-resistant metal material, mainly used in mg alloy production, aluminum alloy production, steelmaking desulfurization, aviation and military industry and other fields. In 2022, our Industrial Park Mg production was 510,000 tons, accounting for 50% of the world's production.
It is the only type of Urea that meets the ISO 22241 specification (Uncoated, Aldehyde, heavy metals free) and the only suitable Urea for the production of AdBlue®/AUS32/ARLA32 solutions. For meeting the ISO 22241 the Urea needs to be of highest purity/quality. Automotive grade urea dissolved within deionized water is resulting in an aqueous urea solution, supporting the reduction of mono-nitrogen oxides exhaust emissions by injection into selective catalytic reduction systems of heavy duty engines. This aqueous urea solution is standardized as AUS 32 in ISO 22241 and consequently the technical specifications for automotive grade urea are derived from this standard. Urea Assay (wt %) 98.0 min 99.1 Granulate size 0.85-2.80mm 91% Moisture (wt %) 0.5 max 0.3 Nitrogen(wt %) 46 46.4 Biuret (wt %) 1.0 max 0.65 Aldehydes (ppm) 5 max 4 Free Ammonium (wt %) 0.01 0.01 Insolubles (ppm) 20 13 Fe (mg/kg) 0.5 max Less than 0.2 Al (mg/kg) 0.5max Less than 0.2 Cu (mg/kg) 0.5 max Less than 0.2 Zn (mg/kg) 0.5 max Less than 0.2 Cr (mg/kg) 0.5 max Less than 0.2 Ni (mg/kg) 0.5 max Less than 0.2 Mg (mg/kg) 0.5 max Less than 0.2 Na (mg/kg) 0.5max Less than 0.2 K (mg/kg) 0.5 max Less than 0.2 Ash (ppm) 100 max. Less than 10 Phosphate(ppm) 0.5 max Less than 0.2 Heavy Metal( ppm) 0.5 0.3 Additive NONE NONE
AdBlue liquid solution is made up of 32.5% urea and 67.5% de-ionised water. You may be wondering, where does the urea in AdBlue ic ammonia and carbon dioxide. The urea is then added to the de-ionised water to create AdBlue. This guarantees quality in accordance with very strict specifications contained in ISO 22241. AdBlue is a diesel exhaust fluid used in vehicles with Selective Catalytic Reduction (SCR) technology to reduce harmful gases being released into the atmosphere. AdBlue is a 32,5 % solution of high-purity, synthetically manufactured urea in de-mineralized water. It is a safe-to-use fluid. Parameter Minimum Maximum Unit Appearance Colourless Liquid with slight ammonia odour   Freezing point -11°C -11°C °C Boiling point 100°C 100°C °C Basicity 9 10 pH Flash point not applicable (non-flammable)   Water solubility 100  g/l Viscosity at 20°C 1.4 1.4 mPa.s Urea Content 31.8 33.2 % Density at 20°C 1.087 1.093 g/cm3 Refracting index at 20°C 1.3814 1.3843  Alkalinity as NH3  0.2 % Biuret  0.3 % Insolubles 20 mg/kg  20 mg/kg Calcium  0.5 mg/kg Iron  0.5 mg/kg Aluminium  0.5 mg/kg Magnesium  0.5 mg/kg Sodium  0.5 mg/kg Potassium  0.5 mg/kg Copper  0.2 mg/kg Zinc  0.2 mg/kg Chromium  0.2 mg/kg Nickel  0.2 mg/kg
Polypropylene is a polymer whose monomer is propylene (an organic hydrocarbon with the chemical formula C3H6). The chemical formula of polypropylene is (C3H6)n. This polymer is also known as polypropene and is often denoted by the abbreviation PP. Generally, polypropylene is produced via a chain-growth polymerization reaction involving propylene. Toughness and flexibility (exhibited to a large extent especially when the polymerization process involves copolymerization with ethylene). Large thermal expansion. Resistant to organic solvents. Resistant to weak oxidizing agents. Soluble in some organic nonpolar solvents like xylene.
Caustic soda is an alkali salt which is also called Lye. It is the common name of sodium hydroxide. This name is given due to the corrosive nature of this salt on animal and plant tissues. It's a highly caustic base and the alkali that decomposes proteins at ordinary ambient temperatures and can severely burn chemical burns. It readily absorbs carbon dioxide and moisture from the air and is highly soluble in water. It creates a series of hydrates NaOH·nH2O. One of the strongest alkalis is a white solid, with no pronounced odor. The size of the flakes can reach 0.5 mm. NaOH easily dissolves in water and absorbs moisture from the air with the release of a large amount of heat. It has a wide range of applications. The chemical formula of sodium hydroxide is NaOH. Caustic soda it is often use in in the manufacturing of petroleum products and manufacturing of pulp and paper.
YETD-MC has a production line of 400,000 tons of synthetic ammonia and 600,000 tons of urea. High-quality raw coal is used as raw material to ensure product quality. The recycling project also provides about 80,000 tons of ammonium sulfate, which in turn is an important raw material for 100,000 tons of compound fertilizer. We can provide ammonium sulfate (N20.5%), urea (N46%), various types of compound fertilizers (N+P+K=57% MAX). Urea, also called carbamide, the diamide of carbonic acid. Its formula is H2NCONH2. Urea has important uses as a fertilizer and feed supplement, as well as a starting material for the manufacture of plastics and drugs. It is a colorless, crystalline substance that melts at 132.7° C (271° F) and decomposes before boiling. Because its nitrogen content is high and is readily converted to ammonia in the soil, urea is one of the most concentrated nitrogenous fertilizers. An inexpensive compound, it is incorporated in mixed fertilizers as well as being applied alone to the soil or sprayed on foliage. With formaldehyde it gives methylene??urea fertilizers, which release nitrogen slowly, continuously, and uniformly, a full year??s supply being applied at one time. Standard: GB/2440-2017 Model Nitrogen Biuret Moisture Size(d0.85-2.8mm) Urea-A 46.4% 0.9% 0.5% 93% Urea-B 45.0% 1.5% 1.0% 90% Appearance Granular, No mechanical impurities"
Polyurethane The term polyurethane encompasses a vast family of products with numerous varied characteristics in terms of mechanical, chemical and physical properties. Through the right choice and proportion of polyols and diisocyanates it is possible for products to range from soft and sponge-like, such as flexible foams with extremely low density (pillows, mattresses, etc.) to products with elevated resistance to compression and flexion stress (for applications in sporting goods, such as hiking boots, ski boots, etc.). In order to have a general guide regarding the characteristics of polyurethane, the primary distinctions to consider relate to its chemical nature, or rather, if it has an ester or ether base. In commerce there is also a third family of polyurethane, which derives from the synthesis of caprolactam, which exhibits intermediate characteristics between polyester and polyether.
DESCRIPTION : Davana Oil is obtained by steam distillation of the overground parts of the flowering herb, Artemisia Pallens wall. The plant grows in the same parts of southern India where also sandalwood is grown. Davana Oil is very dark green or brownish green in color. Its odor is sharp, penetrating, bitter green, foliage like and powerfully herbaceous with a sweet balsamic, tenacious backnote. It widely used in aroma therapy for its aromatic properties. Common Name : Artemisia Pallens Wall. Oil Artemisia pallens herb oil Blends With: Davana Essential Oil blends with most of the Citrus, Spicy and Woody Essential Oils such as neroli, geranium, grapefruit, cedar wood, caraway, coriander and chamomile essential oils. Constituents : davana oil, and linalool decreased while those of (Z)- and (E)-methyl cinnamate, (E)-ethyl cinnamate, bicyclogermacrene, davana ether, 2-hydroxyisodavanone Uses : In food, flavour, cosmetic, and perfume industries
Essential oils offered are available in form of a concentrated hydrophobic liquid that contains volatile aroma compounds, ethereal oils or aetherolea from plants. With the extracted oil though different processes carries in it a distinctive scent or essence of plant, it also has in its constituents many beneficial properties that makes the oil useful for providing solutions for relative areas like medical and others. With the oils normally extracted using distillation process, at ties expression or solvent extraction process is also used depending upon the delicate nature of the oil. Some of the common areas where these are used in include in cosmetics, perfumes, soaps and other products and also in adding scents to incense products. Some of the other properties of the oil for which these are known for include aphrodisiac, astringent, bactericide, balsamic, cardiac, carminative, decongestant, depurative, detoxification, digestive, disinfectant and expectorant
Hydroxyethyl cellulose (HEC) is a non-ionic soluble cellulose ether derivatives that can coexist with many other water-soluble polymers, surfactants, and salts. HEC has the properties of thickening, suspension, adhesion, emulsification, stable film formation, dispersion, water retention, anti-microbial protection and colloidal protection. It can be widely used in coatings, cosmetics, oil drilling and other industries. The main properties of Hydroxyethyl cellulose(HEC) are that it can be dissolved in cold water and hot water, and has no gel characteristics. It has a wide range of substitution, solubility and viscosity. It has good thermal stability (below 140C) and does not produce under acidic conditions. precipitation. The hydroxyethyl cellulose solution can form a transparent film, which has non-ionic features that do not interact with ions and have good compatibility.
HPMC It's a kind of chemical materials, white or slight off-white granular powder, ororless. HPMC is a natural polymer materials as a raw materials, through a series of chemical processing and prepared non-ionic cellulose. What is HPMC for gypsum Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose ether obtained from cellulose after alkalinization, etherification, neutralization and washing. HPMC for gypsum has good thickening, dispersing, emulsifying and film-forming properties, and is the first choice for producing high quality building material additives. Properties of HPMC for gypsum To meet the needs of environmental protection, our product has the characteristics of high water retention, good dispersibility, good fineness, good processability and easy dissolution. It is widely used in building substrates, with good water retention and improved workability. It can also prolong the opening time and improve the anti-sagging property.
