Zenith Rubber has been in the forefront of manufacturing industrial rubber products since 1965. Today it enjoys the leadership status as the major exporter of quality rubber sheeting and Fooring. Zenith provides a variety of Anti-Skid Mats for multipurpose use. The primary objective is to provide a durable non-skid oor mat. While using Fooring mats, slippage or creeping of Foor mats has always been a problem in wet or dry applications. Our various anti-skid mats are the best solution for it. Our mats are excellent in shock absorption and slip resistance as well as providing improved walking comforts. Flooring mats with anti-skid ridges prevent slips & falls and come with a protective, non-stick ?nish to make cleaning quick and easy. These Mats are available in various compounds depending on their indented use. Our quality and manufacturing procedures are strictly in accordance with ISO 9001:2015, ISO 14001: 2015 and ZENITH’s extensive R&D facilities are available to investigate new products and materials, to meet the needs of our customers.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Zenith Abra-Super Rubber sheets use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments. Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance. Features Premium Resistance to abrasion with excellent tensile strength and high elasticity. Applications Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins. Finish Type Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish. Standard Thickness 1 mm to 40 mm Standard Length 10 Mtr, 33 Ft, 11 Yard Standard Width 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches Technical Specification Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature Gm/cm3 Shore A Kg/cm2 % mm3 C STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 -- Abrasuper 40 0.98 38 240 810 120 -30 to +70 Abrasuper 60 1.10 60 200 500 110 -30 to +70 ABRA R 60 1.10 60 270 700 110 -40 to +75 ABRA HDR 1.15 70 225 600 110 -40 to +75 >Custom width and length is available on request >Custom colours available on request
Inflatables Products With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts. The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors. Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
