Hydraulic transmission, static torque stepless adjustment tightening torque; Accurate and constant output torque ensures accurate fastening of the sleeper nut; High speed tightening at low torque, increased resistance torque, automatic Switch to high torque low speed; Torque visual display, night lighting (using LED hair Photodiode), convenient and efficient; The machine is powered by gasoline engine and carried out by hydraulic system Drive and precise control, is the railway new and old lines, special Especially the high-speed railway line is very suitable for construction and maintenance Trade machinery; The machine hydraulic system adopts advanced technical principle, Achieves high speed tightening when the torque is small, and increases when the drag torque Large to a certain automatic switch to large torque low speed, so that the liquid The pressure wrench can output more tightening torque; The mechanical part of the hydraulic wrench wear will not be affected Hydraulic wrench accurate tightening torque output and display; double head wrench, high efficiency, operation and adjustment The section is very convenient and light in weight. The nut sleeve adopts 10,000 The floating mode makes it easier to insert or detangle the sleeper Mother, sleeve stroke is convenient to change; This machine is suitable for the construction and maintenance of various specifications sleeper nuts and bolts (including rectangular bolts) of various types of railway rail.
Model V222TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1000(736)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 191 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,830
Model V180TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 820(603)/2,300 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 187 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,630
Model V222TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 720(530)/1,800 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 129 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,750
Model V180TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 650(478)/2,100 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 141 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,550
Model V158TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 680(500)/2,300 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 10.89 Compression ratio 14.6 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 130 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,435
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Model V158TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 480(353)/1,800 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 8.52 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 85 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90 ° Grinding head stroke 45 mm Total weight 61kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
expertbinocular * com Product Info for Kenko Lens2scope Adapter for Nikon F Mount (Angled View) Kenko black Lens2scope Adapter for Nikon F Mount is a simple accessory that converts any Nikon F Mount lens into a spotting scope. Its lightweight body houses a compact roof prism, lenses, and an eyepiece just like a traditional spotting scope and with the lens is attached, the whole system acts as a spotting scope. This model features an angled eyepiece that is set at a 45�° angle for more comfortable viewing while sitting, standing or laying. Kenko K-LS10-NFAB Specs Prism System Roof prism Focal Length 10 mm Apparent Field of View 42�° Eye Relief 20 mm Dimensions 7.1 x 4.3 x 3.1" / 18.0 x 11.0 x 8.0 cm Weight 6.5 oz / 185.0 g Packaging Info Package Weight 0.635 lb Box Dimensions (LxWxH) 6.1 x 4.35 x 3.5"
Starting a livestock feed pellet factory has been a profitable business activity in many countries. The production line of the livestock feed pellet factory specializes in producing pig feed, horse feed, cattle feed, sheep feed, donkey feed, rabbit feed, etc. How to make livestock feed? You need livestock feed pellet plant equipment first. Our livestock feeds pellet mill production line with output ranging from 1 t/h to 100 t/h. A complete livestock feed pellet plant includes raw material storage, a cleaning machine, a feed crusher, a feed mixer, a livestock feed pelletizer, a cooler, a screening machine, a packaging system, transportation, and an electronic control system. Our feed pellet production line can produce 2-12mm cylindrical feed pellets according to your needs. At the same time, the livestock feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. We provide free installation, training, factory design, and timely after-sales service.
Starting a poultry feed processing plant has always been a profitable business in many countries. Poultry feed plant specializes in producing duck feed, goose feed, chicken feed, bird feed, parrot feed, and other poultry feed, etc. How to make poultry feed? You need a poultry feed pellet production line first. Our fully automatic poultry feed mill plant with output ranging from 1ton/h-100ton/h. The complete poultry feed pellet production line includes raw material storage, a washing machine, a feed crusher, a feed mixer, a poultry feed pelleting machine, a cooler, a screening machine, a packaging system, transportation, and electronic control system. The poultry feeds pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the poultry feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Technical Parameters Travel of X and Y Axes: 250x300 mm; Maximum cutting thickness: 350 mm; Maximum Work piece weight: 200 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 340x500x350 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 1480x1010x1400 mm; Approx. Machine weight: 1050 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Hydrolysis cleaning system refers to a cleaning process that utilizes the chemical reaction of hydrolysis to break down & remove polymer from surfaces or equipment. This system is commonly used in industrial settings, such as in the cleaning of heat exchangers, boilers, condensers, filtration elements and other equipment that may accumulate deposits. The principle of Vacuum cleaning furnace is based on the property that high molecule of synthetic fiber, isolated from air, is to be molten when the temperature reaches up to 300�?C, then melt polymers flow into waste collecting tank; when the temperature increases to 350�?C, up to 500�?C, polymer starts to degrade and exhaust out of furnace. TEG cleaning furnace: It uses the principle that polyester can be dissolved by glycerol (TEG) at its boiling point (at normal pressure, it is 285�°C) to achieve the purpose of cleaning. Ultrasonic cleaner: it is a device that emits vigorous mechanical vibrations into a liquid bath. This device achieves cleaning purposes through the use of sound waves. The sound waves create cavitations through the movement of the liquid bath, resulting in a detergent effect on the surface of the item being cleaned. It releases energy up to a level of 15,000 psi in order to loosen and eliminate dirt, grime, and impurities.
Technical Parameters Travel of X and Y Axes: 1000x1200 mm; Maximum cutting thickness: Standard: 800 (Can be adjustable) mm; Maximum Work piece weight: 2000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1010Ã??1500 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 100 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 3100x2500x2300 mm; Approx. Machine weight: 5000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 630x800 mm; Maximum cutting thickness: 600/800 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 680x1080x600 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2265x1865x1980 mm; Approx. Machine weight: 3500 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
DK7745 Technical Parameters Travel of X and Y Axes: 450x550 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 750 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 500x750x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1865x1350x1900 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 400x500 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 450 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 460x690x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1600x1240x1400 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 350x450 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 400x650x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400 mm; Approx. Machine weight: 1440 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
