Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
DESCRIPTION Doctor-sil 792 is a high performance, weatherable product and suitable for various interior/exterior joint sealing, glazing, and curtain-wall. It is designed to have 50% movement capability, superior durability, weather ability and adhesion. Especially, it is a low modulus product which can efficiently cope with shrinkage/swelling on joint having superior elongation ratio. FEATURES AND ADVANTAGES * Low modulus product specially designed for new building joint. * Superior bonding strength on various substrates without primer. * Easy application with one component. * Easy installation with good extrusive property. * Superior weather ability and durability. APPLICATIONS * Window & Window Frame Joint Sealing * Interior/Exterior Joint Sealing * Aluminum Frame Assembling * Curtain Wall Joint Sealing
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shopwindows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature.
Glorious Future Glass has been dedicated to production and sale of the building safety glass for architecture and residences area, including Low- e glass, insulated glass, coated glass, laminated glass, tempered glass, silk- screen glass, flat- bending and tempering glass, fire- resitant glass, heat soaked glass, locomotive glass, half- mirror, anti- slip glass, shower door glass, pool fencing glass, balustrading glass, skylight glass etc. Product Information Basic Information Product Name Toughened Glass / Tempered Glass Thickness Customized Size Customized Type Large or normal size glass panel Color Customized Packing Safety Sea - worthy Wooden or Plywood packing Delivery Time Shipped within 15 days after receive deposit Payment Term T/T, Western Union, etc Shipping Sea, Air, Express Certification CCC, ISO9001, EN, AS/NZS2208, SGCC, IGCC Application Doors and Windows, Bathroom, Indoor Partition, Daylighting Ceiling, Furniture Glass, Guardrail Glass, Fence Glass Characteristics of Toughened/Tempered Glass Toughened glass compared with equal to the height of float glass, high resistance to bending and impact resistance strength of 4-5 times Not easily broken when we choose, the glass broken into smaller particles obtuse Angle after fragments, won't cause harm to human body Safety glass, which are widely used in mechanical strength and higher security requirements, such as glass door, curtain wall, indoor partition, elevator, showcase, building primary side window, furniture appliances, etc Security, impact strength and thermal stability as well as flat tempered glass, its high wind pressure strength and immunity performance than tempered glass, safety glass Properties of Toughened/Tempered Glass Properties Toughened/Tempered Glass Thermal Shock Resistance Up to 250�°C Mechanical Strength Four to five times stronger than annealed glass Tensile Strength 65 MPa Bending Strength 120 - 200 N/mm2 Surface Compression > 95 MPa Design Stress for Architectural Purposes 50 MPa Fragmentation Small round crystals Conducive for Processing Cannot be cut after Toughening
1. SPECIFICATIONS Dope dyed 100% polyester yarn FDY 150D/36F Multifilament You are able to choose the followings for your requirements: Raw white or unlimited color alternatives Bright, semi-dull, or full dull Round or trilobal Non inter-mingled, slightly inter-mingled or heavily inter-mingled Non twisted or twisted with S or Z or S+Z Low shrinkage, medium shrinkage or high shrinkage Low tenacity, standard tenacity, medium tenacity or high tenacity With open end or without open end 2. FDY Counts: 30D-1000D/24F-575F 3. CHARACTERISTICS Eco-friendly, high color fastness, consistent color, comfortable luster, soft touch, etc. 4. APPLICATIONS Textile fabrics, embroidery, label, decoration, braid, jacquard, knitting, home textile, clothes, shoes, hat, carpet, curtain, scarf, bag, towel, gloves, socks, etc. ANY PERSONALIZED ORDERS ARE WELCOME! ! 5. Technical Index: Raw material 100% polyester chips Dyeing type Dope dyed Density deviation % ±2.0 for AA grade, ±2.5 for A Grade Density CV % â?¤1.50 Tenacity â?¥3.10 Tenacity CV % â?¤8 Elongation % To be negotiated with customers ±6 Elongation CV % â?¤16 Oil content % To be negotiated with customers ±0.35 Thermal shrinkage % To be negotiated with customers ±1.2 Boiling shrinkage % To be negotiated with customers ±1.2 Color evenness â?¥4 Weight of bobbin kg â?¥1.50 Color fastness To comply with customers' requirements Network density tpm To be negotiated with customers ±6.0 7. Packing Weight of full bobbin: 2-9 kgs Carton size: 70X35X31 cm, about 4-6 full bobbins/ carton 20" Container: About 10 tons, 40" container: About 22 tons, 40" hq container: About 24 tons 8. Payment: T/T, L/C, the other manners are negotiable. Delivery: 15-25 days after receipt of 30% advance (T/T) Or receipt of the original L/C
China Hi-Tech Automobile Group Co., Ltd. is an automobile manufacturing enterprise controlled by CHTGC Group, a wholly-owned subsidiary of SINOMACH, directly managed by the central government. The parent company is one of the world's top 500 enterprises L4600 is the first large-displacement hard-core off-road vehicle owned by CHCT. Its wide and heavy shape design, powerful and tough image. The appearance are typical Japanese off-road style. The thick air intake grille highlights its tough guy quality, giving people the feeling of being mighty and domineering, and it looks like King Kong. In terms of safety technology, vehicles are equipped with ESP vehicle stability control, ABS anti-lock braking system, TCS traction control, HDC steep slope descent system, HHC ramp parking control and HHC ramp parking control to ensure driving safety to the maximum extent. In passive safety, the vehicle adopts non-load-bearing body structure, with eight horizontal and two vertical standards and extremely thick girders. This can not only provide sufficient protection for key parts such as engine and gearbox, but also have strong rigidity and torsion resistance even when driving on unpaved roads. When a collision occurs, the vehicle body can disperse energy to ensure that the cockpit does not deform. In order to ensure the safety of personnel, nine airbags are built into the vehicle body, namely, driver's head airbag, co-driver head airbag, main driver's knee airbag, left and right air curtains, main and co-driver seat side airbags, and two rows of left and right seat side airbags to provide comprehensive protection for passengers. Feture: The product displayed excellent performance under the test of ice, desert, extreme cold and heat. In order to ensure the reliability, passability and stability of the chassis, Through lots of experiments on parts and vehicles and trial runs , the frame has withstood 500,000 torsion loading experiments. The stability of the whole vehicle, the speed of straight-line pile passing has exceeded 80 km/h, and the speed of ice surface circle drawing has reached 120km/h. The wading depth has passed 800mmï¼?The vehicle has also withstood the extreme temperature test of minus 45 degrees and above 60 degrees. All indexes of vehicle performance have been perfectly displayed in the test. As an essential configuration of off-road vehicles, the time-sharing two-speed transfer case and the front and rear axle double differential locks ensure that they can still get out of trouble under only one wheel; Equipped with trapped self-rescue equipment, 3.5 tons of towing hanging points front and rear; Optional front and rear double electric winch installation and double spare tire bracket.
GALVO LASER ENGRAVER & MARKER 40 PRODUCT DESCRIPTION This system has the max GALVO view 400mm * 400 mm, GALVO head is adjustable according to the size of the materials you process, you can reach different laser beam size by adjusting the GALVO height. You can get the laser beam to 0.15 mm for the best cutting performances up to 400mm*400 mm working area. There are a few options such as the Red-Light Indication System and CCD Positioning System enables the correct centering of the working path to the real position of the piece in the process. It is available with the Full Enclosed option to meet class 1 laser product safety protection. FEATURES Process: Cutting, Marking, Perforation, Scoring, Kiss Cutting Process Materials: Textiles, Leather, Wood, PMMA, Plastic and other Non-metal Materials Application: Shoes, Bags, Garments Accessories, Gift Card, Labels, Packing, Puzzles, Fashion (Sportswear, Denim, Footwear, Bags), Interior (Carpets, Curtains, Sofas, Armchairs, Textile Wallpaper), Technical Textiles (Automotive, Airbags, Filters, Air Dispersion Ducts) Specification: Working Area (W * L): 900mm * 450mm (35.4â?? *17.7â??) Beam Delivery: 3D Galvanometer Laser Power: 180W/250W/500W Laser Source: CO2 RF Metal Laser Tube Mechanical System: Servo Driven, Belt Driven Working Table: Honey Comb Working Table Max Cutting Speed: 1~1000mm/s Max Marking Speed: 1~10,000mm/s The company MimoWork develops and designs laser systems for non-metal material processing in the industry. We are committed to providing the most suitable solutions for laser cutting, marking, perforating and engraving. With over 20 years of combined expertise in the worldwide laser application industry, MimoWork offers clients comprehensive services, integrated solutions and results are unparalleled. In a continually evolving industry, you may want an experienced partner to bring you the new technology to challenge tradition. MimoWork does not just manufacture the laser systems, more importantly, the company goes deep to understand every client's manufacturing process, technology context and industry background. We analyze the unique business needs of each client, run the sample tests and evaluate each case for the purpose of providing responsible advice. MimoWork values our customers, we offer comprehensive supports for worldwide business. As a leading laser cutting machine manufacturer who is capable to produce contour laser cutter, super large format perforation machine, we guarantee quality and guarantee on-time delivery. If you are looking for Laser Cutting Machine, we will be your best choice! Click here for more information about Galvo Laser Engraver & Marker 40.
China factory competitive price 21.52mm SGP curved tempered laminated safety glass 10104 VSG Introduction 21.52mm SGP curved tempered laminated glass is made from two pieces of 10mm curved tempered glass bonded together with 1.52mm SentryGlas�® (SGP) interlayers, it is well-known as high security glass, because it can withstand the severe weather like storms, hurricane and cyclone, and have high performance of impact resistance and bullet resistance. Advantages Pure clarity: the SGP toughened laminated bent glass are virtually invisible and do not have the slight color variations as seen when using PVB interlayers, this is especially true when used with extra clear low iron glass.� High safety: in the event of breakage, the SGP laminated safety glass fragments remain firmly bonded to the interlayer, and it is still standing, not falling down, reducing the chance for injury. Solar energy control: when the SentryGlas�® use with curved coated low-E glass, it can improve energy efficiency, and help engineer more effective thermally insulated glass, and glass with better controlled (or allowed) transmittance of V radiation. Good durability: DuPont SentryGlas�® offers long-term durability even when edges are exposed to severe weather.� Open edges of laminated glass made with SentryGlas�® are less susceptible to moisture intrusion, and remain free from clouding even after years of exposure. Create aesthetic sense: SGP curved laminated glass allows more overall structural glass to be used with less visible metal support than regular PVB bent laminated glass panels, so architects and designers are free to create nearly transparent, precise metal-free facades that can also meet or exceed the increasing environmental and security demands many projects now require. Application Based on high performance, the SGP curved laminated glass could use as components in double glazed glass structures, and could be considered for many of the following applications: structural and clear point fixed supported balustrades, handrails and staircases ; structural curtain wall facades, canopies, and skylights, regular and point fixed; customized over-sized glass shopfronts, glass screens, glass partition walls, glass fins; windows and doors in hurricane, tornado or earthquake prone areas; jewelry stores, high-end retail, Money Exchange, Exotic Car Dealerships; Many others where need high security.
SGP Laminated tempered Glass China factory, toughened laminated glass with 0.89mm,1.52mm,2.28mm SGP interlayer Sentry glass plus interlayer (SGP) for laminated safety glazing is the latest innovation in Dupont's family of glass laminating products, It extends the performance of laminated glass beyond current technologies. Sentry glass plus inter layer offers 5 times the tear strength and 100 times the rigidity of conventional PVB inter-layer. Because of its added strength, clarity, durability, fabrication and installation ease, it is an excellent candidate for demanding applications in the architectural market place. It can offer improved ballistic protection or thinner constructions than are now possible with conventional laminated glass. SGP laminated glass inter-layer tear strength is five times than the normal PVB, a hundred times  hardness for PVB ,is the best material for made Bullet-proof glass. SGP film with excellent adhesive strength of metal, can bond of online LOW E glass can be Energy-saving laminated glass, not only has anti sling security, but also with Low E glass energy saving function, possible to replace of Low E insulated glass.� Specification� Size: Max 3000*5000mm, Mini 300*300mm, any customized size could be produced. Thickness: glass substrates could be 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, etc.,SGP thickness 0.89mm, 1.52mm, 2.28mm,3.04mm, etc. Glass type: Clear float glass,â??low iron float glass/ ultra clear float glass,â??tempered glass, low-e glass, acid etched glass, screen-printed glass, etc.� SGP laminated glass characteristicsï¼?� 1. Compare with PVB laminated glass, the strength more higher, more transparent, the best configuration of super clear float glass 2. SGP laminated glass tearing strength is 5 times of PVB laminated glass 3. SGP laminated glass with high strength, can directly to use as the glass curtain wall structures 4.Can according to architectural design requires homogenization and heat soak process treatment SGP safety Laminated Glass Additional Attributes� Fragment retention if broken.� Meets safety glazing standards.� Hurricane protection Meets impact& cycling resistant standards. Intrusion resistance and forced entry The superiority SGP film compare PVB film SGP film laminated glass equivalent thickness = two glass panel plus PVB film laminated glass equivalent thickness = single panel glass x1.25
Description of high pressure grouting machine: WGP800/1200/200PI-D grout station is a combination of mixer, agitator and grout pump in one plant. It is mainly used in highway, railway, hydropower, construction, mining and other ground and underground construction. High speed vortex mixer ensures mix quickly and evenly. Water, cement or bentonite is quickly mixed into a homogeneous slurry. Then the mixed slurry was delivered to the agitator. Grout pump injects from the mixing drum (storage tank). This ensures a continuous mixing and grouting operations. The grouting plant is full hydraulic drive with diesel engine. Grouting pressure and displacement is step-less adjustable. Compact size and it is easy to operate. It also takes up a small space. Application 1. Civil engineering - dam, tunnel, subway, mine, soil nailing wall, curtain, anchor, cable trench and anchor grouting 2. Building structure - building and bridge repair, foundation reinforcement, slope support, soil compaction, terrg grouting 3. Engineering - underwater foundation, offshore platform, coast foundation grouting reinforcement 4. Mine application - roadway reinforcement, backfill, waterproof grouting 5. Geotechnical - deep well casing, monitor wells, well sealing and abandonment 6. Acted as a grouting plant in the Pipe Jacking Machine Wode Heavy Industry Co., Ltd., short name Wodetec, is a manufacturer specialized is R&D, manufacture and sale of grout equipment. Grout Equipment includes: grout plant, grout pump, grout mixer and agitator etc. Grout equipment is specially designed for continuous cement mixing and grouting in ground and underground engineering, such as highway, railway, hydropower, construction, mining. Now we have developed full series of grout plant and grout station, pump including piston type, plunger type and hose type. Mixer volume from 200L to 800L, agitator volume from 300L to 1200L, pump flow from 0 to 200L/min and pressure from 0 to 100 bar. Electric power and diesel power are available for customization. From years of experience Wode Heavy Industry Co., Ltd. has developed its own R&D and technician teams, which supports further development and customized service for clients.
The WGH 75/100PI-E high pressure vertical grouting pump is designed and made for permeation grouting, compaction grouting, backfilling grouting, curtain grouting, high pressure split grouting etc, grouting methods. Grouting material: cement mixture, mortar/plaster, bentonite and other additive. Feature: 1. Compact structure, light weight, easy operate, low maintenance 2. With digital display counter: it can display at any time, and can accumulate work times 3. Flow and pressure can be adjusted step-less 4. Equipped with emergency unloading valve: in case of an emergency, it can be load-off instantly 5. In low pressure, it will be flow-converging of two pumps; In high pressure, there is only one pump work. Low pressure and large flow, high pressure and low output 6. With full-hydraulic shaft device, stable and reliable operation 7. Cooling type: water-cooling and air cooling; Suitable for hot and cold areas Applications: 1. Civil Engineering - dam foundations, tunnels, mining, soil nails, tiebacks, earth anchors, cable and rock bolts 2. Structural building and bridge restoration, foundation stabilization, foundation raising, soil compaction grouting; soil & rock grouting 3. Construction - pavement under sealing, slab jacking and slab raising 4. Marine - underwater foundations, piers, breakers, shoreline foundations 5. Mining - tunnel lining, contact grouting, shaft waterproofing 6. Utilities - encasements, waterproofing, slope line grouting 7. Geotechnical - deep well casing, monitor wells, well sealing and abandonment Wode Heavy Industry Co., Ltd., short name Wodetec, is a manufacturer specialized is R&D, manufacture and sale of grout equipment. Grout Equipment includes: grout plant, grout pump, grout mixer and agitator etc. Grout equipment is specially designed for continuous cement mixing and grouting in ground and underground engineering, such as highway, railway, hydropower, construction, mining. Now we have developed full series of grout pump, pump flow from 0 to 200L/min and pressure from 0 to 100 bar. Electric power and diesel power are available for customization. From years of experience Wode Heavy Industry Co., Ltd. has developed its own R&D and technician teams, which supports further development and customized service for clients.
Eco-friendly materials FIRE BEHAVIOUR The consideration for fire and safety in the construction of any buildings is a key design factor. In the event of a fire, the risk of human lives is greater in high rise building such as hotels, service apartments and offices, purely due to the heavy concentration of people in these buildings. However, these risks can be drastically reduced by taking appropriate fire protection measures such as having sprinkler system, fire doors and firewall grade party walls. In the case of external wall cladding, the use of SEVENBOND® FR panel will have reduced the spread of flame thus minimising the chance of loss of lives due to fire. The SEVENBOND® FR series with its fire-resistant core materials fully complies with the most demanding fire safety standards worldwide and is clearly illustrated in the table below: The SEVENBOND®-FR series are supreme fire-resistant materials and fully comply with the most demanding fire safety standards worldwide as shown in the fire classifications table below: Notes: 1) BS 476 part 6 and 7 tests were conducted in SIRIM Malaysia and TUV-SUD-PSB, Singapore. The tests conducted in Singapore were tested on the surface where the aluminium skin was removed. This is to ensure even the FR core material meets the Class O classification. 2) EN 13501-1 is the European fire testing standard. In Europe, a B,s1,d0 rating is required for ACP panels to be used as external cladding for high rise buildings. 3) NFPA E 84 and NFPA 285 are the fire testing standard of the National Fire Protection Association of USA. The NFPA 285 is a multi-story fire propagation test and is one of the most stringent test. The passing of these two tests are a prerequisite for ACP panels to be used for high rise projects. APPLICATIONS With a variety of finishes and excellent properties, SEVENBOND® FR panel allows the designer to exercise his full spectrum of his imagination and creativity but without compromising on safety against fire. SEVENBOND FR® is suitable for the various applications listed below: External and interior wall cladding Modern building facelift and refurbishment Fins and copings Tunnel linings and ceilings Back pan for curtain wall system TECHNICAL SPECIFICATION Compliance Certified to MS 2571 and CIDB, PPS Thickness 4.0mm Aluminium Skin 0.5mm (Option: 0.4mm) Alloy 3003 Tensile Strength (min) 165N/mm2 0.2% Proof Stress (min) 145N/mm2 Modulus of Elasticity 70,000N/mm2 Finish KYNAR 500® PVDF paint by PPG. Coated surface shall meet the specification and performance requirement according to AAMA 2605. Coated surface shall be carried out by PPG authorized applicator. Standard size (W) 1250mm/1500mm Standard size (L) 3200mm or 4000mm. Custom-ordered length is also available. More information you can view here.