Product Description
FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 channel of SDH, PDH, and other Optical Transmission Equipment or microwave, satellite Equipment to V.35/V.24 channel, Extend V.35 channel of DDN. Used widely in data communication networks, Connecting with V.35/V.24 interface of Routers and Optical Transmission Equipments without G.703 interface, realize match between different network equipments, and transparent to upper protocol layer.
Technology Characteristics
-> Bandwidth range is 64Kbps-2048Kbps Realize data of V.35 transparent transport in the E1
-> Support all kinds of loop function, for testing and opening conveniently
-> Support network function, monitor operation condition of facilities
-> Support E1 interface of unbalance 75ª+ and balance 120ª+
-> Be possession of testing function of E1
-> Support ITU-T G.703íóG.704
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
V.35 Interface:
-> Interface Mode : DCE
-> Interface Type : DB25
-> Rate : 64Kbps-2048Kbps
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-165í-35mm
-> Net Weight : 900g
Packing List
-> FE1/V.35 Protocol Converter
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> One conversion cable of DB25-M34
-> Manual book
Product Description
The E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to "Net Bridge".It can effectively utilize free bandwidth of telecom operators' lines and can be used instantly once it is deployed, with little increased investment.
Technology Characteristics
-> Transparent transmission of Ethernet data through E1 lines at 2048Kbps bandwidth
-> Plug and play, without any setting or debugging work
-> Support automatic negotiation feature in Ethernet and full duplex/half duplex mode
-> Support transmission of Jumbo Frames specified in IEEE 802.1Q and Ethernet switches with VLAN capability
-> Local data frame filtering
-> Provide unbalanced 75ª+ and balanced 120ª+ E1 interfaces
E1 Interface:
-> Support ITU-T G.703
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
Ethernet Interface:
-> Fully IEEE 802.3 (2000) compliant
-> Bit rate: 10Mbps or 100Mbps
-> Interface type: RJ45
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-175í-35mm
-> Net Weight : 900g
Packing List
-> V.35/Ethernet Protocol Converter
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> Manual book
204142 Electric Reactors Suppliers
Short on time? Let Electric Reactors sellers contact you.
Product Description
E1 modem is called single of E1 PDH , which can connect the data one port E1 or one port RS232 to the optical interface . the equipment is wildly used in the mobile phone net station. and FTTH interface parameters the VIP optical insert .
Technology Characteristics
-> Realized one E1 transmitting over fiber in transparent mode
-> Allow the equipment to interoperate over V.35 fiber modem and ethenet fiber modem
-> Relaize one RS232 data transmitting in optical fiber line with 4800bps rate
-> Have a loop setting function and easy to open and test
-> Enable to manage networks and supervise equipment running and settings
-> Provide unbalanced 75ª+ and balanced 120ª+ E1 interfaces
E1 Interface:
-> Support ITU-T G.703íóG.704
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
Optical Interface:
-> Rate : 4.096Mbpsí+50ppm
-> Wavelength : 1310nm
-> Power of optical signal output: ¿C2~-11dBm
-> Receipt sensitivity : better than ¿C36dBm
-> Interface : FC
-> Interface mode :DCE
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-165í-35mm
-> Net Weight : 900g
Packing List
-> E1 Optical Modem
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> Manual book
Product Description
4/8E PDH is developed based on the VLSI chips. Relying on the advanced multiplexing technique, 4/8E PDH realizes 4/8 E1 and 100Mb/s fast Ethernet transmission with the function of Auto-Laser-Shutdown (ALS,optional).
Technology Characteristics
-> Transmits 4/8 E1 and one wire speed Ethernet
-> Line bit rate is 150Mb/s
-> Complies with ITU-T G.703 on interface and G.742, G.823 on jitter performance
-> Complies with ITU-T G.802.3 on Ethernet interface and supports auto-negotiation for 10M/100M and half/full duplex working mode
-> Supports VLAN and pause follow control for Ethernet
-> All necessary alarm functions, supervises the status of remote terminal
-> Supports E1 tributaries loop back for network fault diagnostics
-> Supplies standard order wire telephone
-> Supplies one customer RS232 data channel
-> Supplies RS232 for equipment management
-> AC 220 or DC-48 is optional
-> Single board design, 1U, and 19 Inch standard
Optical interface:
-> Transmit Mode : Single/ Multi-mode
-> Module : Single/Double Fiber
-> Interface : FC/SC/ST
-> Wavelength : 1310nm/1550nm
-> Distance : 2Km/40Km/60Km/120Km
E1 interface:
-> Bit rate : 2.048Mb/s , í+50ppm
-> Impedance : 75ª+ unbalanced(Declaration is needed if 120ª+ balanced required)
-> Coding: HDB3, according to ITU-T G.703
-> Jitter: complies with ITU-T G.823 and G.742. Seeing appendix
Ethernet interface:
-> 10M/100M through auto-negotiation
-> Full/Half duplex through auto-negotiation
-> Connector: RJ-45
-> See appendix for Throughput, Packing error rat, Delay, and others
Order wire interface:
-> Phone set: Standard 2-wire phone set
-> Bandwidth: 64Kb/s
-> Coding: PCM
RS232 for management:
-> Bit rate: 9600b/s
-> Data width: 8bits
-> Stop bit: 1bit
-> Parity check bit: None
-> Connector: DB9 (pin)
RS232 for customer data channel:
-> Bit rate: í_250kb/s
-> Connector: DB9(pin)
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 483í-200í-44mm
-> Net Weight : 2.5Kg
Description:
1) GSM900/DCS1800
2) Screen: PDA 2.6í¦
3) MP3/MP4 player
4) 1.3ga pixls camera,
5) Support T-flash Memory Card: 128M
6) Support Chinese/ English/ France/other
7) double sim cards are online
8) Double Bluetooth
9) Can use when the main battery no power
8-port 10/100Mbps-TX or 100Base-FX auto-negotiating Switch
Provide Dedicated Bandwidth in Half or Full-Duplex Modes.
Support port-based Virtual LANs (VLANs).
2.0 Gbps aggregate bandwidth with speeds of up to 200Mbps per port.
Description:
The ANYK-S4008 Fast Ethernet Switch provides the power of switching with the ease of use and affordability of traditional shared hubs. Truly Plug-and-Play, the ANYK-S4008 Fast Ethernet Switch automatically learns about the devices on your network and configures itself, without complicated setup procedures. Dramatic improvements in performance can easily be seen, with speeds of up to 200Mbps per port. Since full bandwidth capability is achieved on each individual port, the congestion problems of shared hubs are easily avoided.
Employing a Buffered Store-and-Forward transmission method with Back Pressure and Flow Control ensures maximum reliability. For added sturdiness, these switches are housed in steel casings and can be rack mounted using the included Rackmount kit. ANYK-S4008 Fast Ethernet Switch comes with 8-switched RJ45 or fiber optical ports. Powerful enough to run your networkí»s backbone, yet so easy they can be used in place of your desktop hubs, let DaShi Crop. and the versatile ANYK-S4008 Fast Ethernet Switch bring the power of switching to you.
Features:
Ideal for Integrating the 10/100Mbps or 100BaseFX Ports. Provide Dedicated Bandwidth in Half or Full-Duplex Modes
NWAY Technology Detects Cabling Type, Speed, and Duplex mode
Transparent transfer all protocols such as TCP/IP, IPX, XNS, Appletalk, Vines, DECnet, ARP, DECLAT and Lansoft etc.
Compatible with All Major Network Operating Systems
Advanced Store-and-Forward Packet Switching Optimizes Data Transfers
Full wire-speed layer 2 switch on all ports
Support port-based VLANs
1M Buffer Memory
Internal 1k MAC address table
- Auto address learning
- Auto address aging (default 300 Seconds)
Supports both Full/Half duplex ports
Flow control capabilities
Automatic Transmit delay control capabilities and maximum delay guarantee
Broadcast flood filtering
Filtering/Forwarding/Learning Rates
2.0 Gbps aggregate bandwidth with speeds of up to 200Mbps per port
Support Comprehensive At-a-Glance LEDí»s
Specification:
Standard
IEEE 802.3 10BASE-T
IEEE 802.3U 100BASE-TX, 100BASE-FX
IEEE 802.1Q VLAN
IEEE 802.1p Priority Queue
IEEE 802.1x
System:
Power Supply:90 / 220 V
Power Consumption:< 30 Watts
Dimension:440mm x 220mm x 44.4mm
1U rack-mount
Temperature:0 to 50C
Humidity:5% to 95% non-condensing
Storage Temp.:-25 to +55 C
Ain features
The power of the rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the rack.
Supplying the converters or powers to be plugged and played.
It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance
2u high: 19-inch standard design
Technical specifications
Capacity : 14 slots available
Power: input: ac 100 ½ 260v, 50½60hz
Output: dc +5v 12a
Power protection: protection from over voltage, over current and short circuit
Working temperature¦0½50µ
Storage temperature¦-20µ½70µ
Relative humidity¦5%½95%
Dimensions: 485 (wide) ß 245 (length) ß 90 (high) mm
Advantage:
1. Pleasing in appearance, innovative and
2. Small size, the thickness of thin, light weight, more conducive to the notebook computer keyboard light, thin, short, small and high-intelligent direction.
3. Moisture-proof, dust-proof, anti-oil pollution and harmful gases, sealing strong earthquake Acid and Basic Resistance.
4. Long life, bending resistance.
Advantage:
1. Pleasing in appearance, innovative and
2. Small size, the thickness of thin, light weight, more conducive to the notebook computer keyboard light, thin, short, small and high-intelligent direction.
3. Moisture-proof, dust-proof, anti-oil pollution and harmful gases, sealing strong earthquake Acid and Basic Resistance.
4. Long life, bending resistance.
* unlocked for use with your existing gsm 850 mhz, gsm 900 mhz, gsm 1800 mhz or gsm 1900 mhz service provider and sim card. Note: this phone does not come with service or a sim card.
* windows mobile
* megapixel camera lets you capture your favorite moments
* video capture takes your camera to the next level
* pda capabilities
For more information, please feel free to visit our company official website at : www.Harunsubarkah.Com
* unlocked for use with quad-band gsm 850/900/1800/1900 mhz service provider and sim card (note: phone does not come with service or a sim card)
* us 3g compatibility (850/1900 mhz umts/hsdpa), 8 gb of memory (no microsd card slot)
* 5-megapixel digital camera with carl zeiss optics, autofocus, digital zoom and flickr support; dvd-quality video capture (640 x 480 pixels at 30 fps)
* 2.8-inch lcd with 16 million colors, gps mapping and directions, web browser, full pim features
* up to 5 hours of gsm talk time (3.5 hours using 3g), up to 280 hours of standby time; measures 3.9 x 2.1 x 0.83 inches (hxwxd)
For more information, please feel free to visit our company official website at : www.Harunsubarkah.Com
* 10.1-megapixel cmos sensor captures enough detail for photo-quality 18 x 24-inch prints
* large 2.5-inch lcd display; includes canon's ef-s 18-55mm, f3.5-5.6 zoom lens
* new self-cleaning dust function, plus dust delete data detection in included software
* digic ii image processor provides fast, accurate image processing; picture style settings for added creative control
* stores images on compact flash (cf) memory cards; powered by battery pack nb-2lh
Technical details
* type: digital af/ae slr with built-in flash
* recording medium: compactflash (cf) card type i and ii
* image format: 0.87 x 0.58 inches/22.2 x 14.8 millimeters (aps-c size sensor)
* compatible lenses: canon ef and ef-s lenses
* lens mount: canon ef mount
* lens focal length conversion factor: 1.6x
For more details, please feel free to visit our company official website at : www.Harunsubarkah.Com
204142 Electric Reactors Suppliers
Short on time? Let Electric Reactors sellers contact you.