Stretch Suede Fabric,Apparel Suede Fabric
Spunbond Nonwoven Fabric 70% Viscose 30% Polyester 45gsm 30x60cm Red Yellow Blue Green, Spunlace Nonwoven Clean Cloth Wipes -
Product name � Non-woven fabric from China factory directly manufacturer Fleece Material: 100% recycled fiber Coating material: LDPE film HS code: 5704900000 Temperature resistance: -30 ° to +80 ° C Roll width: 0.5m,0.7m,1 m,1.5m,1.6m Roll length : 3m,4m,5m,10m,20m,25m,50m Density: 180~1300 g / m² Color: Gray/ white/ Melange Thickness: 1mm~10mm Installation: Easy and fast Reuse: Depending on how dirty you could use the mat several times. Packing: in rolls or folders with plastic bag or shrinking polybag, rolls and folders in carton Delivery: 20-30 days after received T/T advance or open the L/C Payment: 30% deposit, the rest by T/T or L/C
1.detail:nylon/polyester, polyester/spandex, polyester/cotton etc. 2.feature:3 in one, puffy, crinkle, denim etc. 3.end use:jacket, dress & pants etc.
DETAIL100% Polyester TECHNOLOGYUV- cut finishing & wicking
DETAIL Nylon woolly or Polyester microfiber yarns TECHNOLOGY 2 or 3 layers with WP & MVP membrane wicking & UV cut finishing water & wind resistance DWR, coating or lamination
1.detail: 100%polyester, polyester/cotton, cvc, 100%cotton, nylon/polyester, polyester/spandex,polyester/cotton/spandex, polyester/rayon/linen etc. 2.feature: solid, 2 tone, stretch, denim look, see through puffy etc. 3.end use: blouse, dress, skirt, pants, coat, jacket etc.
Product parameters. Xinxiang YULONG textile Co., LTD factory wholesale UL certified flame retardant chemicals fabric Composition: 100% cotton Style: Twill Yarn Count: 20s*16s Density: 128*60 or customization Usable width: 58" Fabric weight: 260gsm,or customization Finish: anti-acid finish Sample: Available for free Brand name: fabulous safety OEM service: Yes Applicable Industry: Our flame retardant chemicals fabric is widely used: Mining, smelting, petroleum, transportation, military, electric and chemical industry, etc. Colour fastness 4 Against light 5-6 Rubbing dry 4 Rubbing wet 4 Against perspiration acid / basic 4~5 Washing 4~5 Shrinkage +/- 3% also we produce other functional fabric and get more certficate Also we have a garment factory ,which can give you one-stop service Packaging & Shipping Packing and shipping. Packing: For fabric: Inner Packing:Plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll 20container 22000-40000m 40container 40000m-63000m For clothing: 20container 3700-4500 pieces 40container 7600-9000 pieces Transportation: By sea, by air,by train and by express delivery. Products purchasing. Payment: L/C,T/T, Western Union, Paypal Port: Shanghai/Tianjin/Qingdao MOQ: Fabric:3000 meters or Clothing:1000 sets
We are the exporter flat strip. Specification: 1) trash 5% to 7% 2) high quality 3) we can supply quantity as per customers demand Each bale weighs approximately 160 kgs with fully pressed in cotton cloth cover.
Our company excels in the manufacturing of 100% cotton pure white comber noil. Fibre length:18 mm Fibre size: 3.8-4.2 denier End use: spinning, open end yarn, paper industries 1 fully pressed bale with double cloth covered.
he plastic waste we turn into regrind comes from two sources. There are many rejected parts produced by plastics manufacturers. These are parts with blemishes, incomplete molding, or incorrect specifications. Thereâ??s no point in throwing them out, so they get recycled. The other source is scrap waste. For example, consider an injection molding machine that produces plastic crates. The complexity of the mold results in a lot of flashing attached to molded parts. That flashing is removed before a crate is sent down the line. Flashing, runners, moils, etc. all constitute a waste. But it can be recycled through grinding. We buy such waste from plastics manufacturers all the time. We then grind it down and pass it through a series of ferrous and nonferrous metal detectors, along with magnets, to guarantee that the finished material is free of contaminants. Now that you know what regrind is, letâ??s talk about why you should care. The availability of plastic regrind could mean different things depending on your position. Let us start with plastic manufacturers and their propensity for producing waste. If you operate a plastics plant, what do you do with the waste you produce? A lack of in-house grinding capabilities suggests you send your waste to a landfill. We offer a better solution. We will actually pay you for your plastic waste. Why send it to a landfill when you can make money on it instead? On the other hand, your company might be looking for less expensive recycled materials for manufacturing new plastic parts. Mixing a bit of regrind with virgin plastic fits your plan. Well, we might sell the very kind of regrind youâ??re looking for. The only way to know is to contact us and ask. Plastic regrind is essentially ground-up plastic waste that can be repurposed. It is one of the products we sell to customers all across the country.
he plastic waste we turn into regrind comes from two sources. There are many rejected parts produced by plastics manufacturers. These are parts with blemishes, incomplete molding, or incorrect specifications. Thereâ??s no point in throwing them out, so they get recycled. The other source is scrap waste. For example, consider an injection molding machine that produces plastic crates. The complexity of the mold results in a lot of flashing attached to molded parts. That flashing is removed before a crate is sent down the line. Flashing, runners, moils, etc. all constitute a waste. But it can be recycled through grinding. We buy such waste from plastics manufacturers all the time. We then grind it down and pass it through a series of ferrous and nonferrous metal detectors, along with magnets, to guarantee that the finished material is free of contaminants. Now that you know what regrind is, letâ??s talk about why you should care. The availability of plastic regrind could mean different things depending on your position. Let us start with plastic manufacturers and their propensity for producing waste. If you operate a plastics plant, what do you do with the waste you produce? A lack of in-house grinding capabilities suggests you send your waste to a landfill. We offer a better solution. We will actually pay you for your plastic waste. Why send it to a landfill when you can make money on it instead? On the other hand, your company might be looking for less expensive recycled materials for manufacturing new plastic parts. Mixing a bit of regrind with virgin plastic fits your plan. Well, we might sell the very kind of regrind youâ??re looking for. The only way to know is to contact us and ask. Plastic regrind is essentially ground-up plastic waste that can be repurposed. It is one of the products we sell to customers all across the country.
he plastic waste we turn into regrind comes from two sources. There are many rejected parts produced by plastics manufacturers. These are parts with blemishes, incomplete molding, or incorrect specifications. Thereâ??s no point in throwing them out, so they get recycled. The other source is scrap waste. For example, consider an injection molding machine that produces plastic crates. The complexity of the mold results in a lot of flashing attached to molded parts. That flashing is removed before a crate is sent down the line. Flashing, runners, moils, etc. all constitute a waste. But it can be recycled through grinding. We buy such waste from plastics manufacturers all the time. We then grind it down and pass it through a series of ferrous and nonferrous metal detectors, along with magnets, to guarantee that the finished material is free of contaminants. Now that you know what regrind is, letâ??s talk about why you should care. The availability of plastic regrind could mean different things depending on your position. Let us start with plastic manufacturers and their propensity for producing waste. If you operate a plastics plant, what do you do with the waste you produce? A lack of in-house grinding capabilities suggests you send your waste to a landfill. We offer a better solution. We will actually pay you for your plastic waste. Why send it to a landfill when you can make money on it instead? On the other hand, your company might be looking for less expensive recycled materials for manufacturing new plastic parts. Mixing a bit of regrind with virgin plastic fits your plan. Well, we might sell the very kind of regrind youâ??re looking for. The only way to know is to contact us and ask. Plastic regrind is essentially ground-up plastic waste that can be repurposed. It is one of the products we sell to customers all across the country.
he plastic waste we turn into regrind comes from two sources. There are many rejected parts produced by plastics manufacturers. These are parts with blemishes, incomplete molding, or incorrect specifications. Thereâ??s no point in throwing them out, so they get recycled. The other source is scrap waste. For example, consider an injection molding machine that produces plastic crates. The complexity of the mold results in a lot of flashing attached to molded parts. That flashing is removed before a crate is sent down the line. Flashing, runners, moils, etc. all constitute a waste. But it can be recycled through grinding. We buy such waste from plastics manufacturers all the time. We then grind it down and pass it through a series of ferrous and nonferrous metal detectors, along with magnets, to guarantee that the finished material is free of contaminants. Now that you know what regrind is, letâ??s talk about why you should care. The availability of plastic regrind could mean different things depending on your position. Let us start with plastic manufacturers and their propensity for producing waste. If you operate a plastics plant, what do you do with the waste you produce? A lack of in-house grinding capabilities suggests you send your waste to a landfill. We offer a better solution. We will actually pay you for your plastic waste. Why send it to a landfill when you can make money on it instead? On the other hand, your company might be looking for less expensive recycled materials for manufacturing new plastic parts. Mixing a bit of regrind with virgin plastic fits your plan. Well, we might sell the very kind of regrind youâ??re looking for. The only way to know is to contact us and ask. Plastic regrind is essentially ground-up plastic waste that can be repurposed. It is one of the products we sell to customers all across the country.
he plastic waste we turn into regrind comes from two sources. There are many rejected parts produced by plastics manufacturers. These are parts with blemishes, incomplete molding, or incorrect specifications. Thereâ??s no point in throwing them out, so they get recycled. The other source is scrap waste. For example, consider an injection molding machine that produces plastic crates. The complexity of the mold results in a lot of flashing attached to molded parts. That flashing is removed before a crate is sent down the line. Flashing, runners, moils, etc. all constitute a waste. But it can be recycled through grinding. We buy such waste from plastics manufacturers all the time. We then grind it down and pass it through a series of ferrous and nonferrous metal detectors, along with magnets, to guarantee that the finished material is free of contaminants. Now that you know what regrind is, letâ??s talk about why you should care. The availability of plastic regrind could mean different things depending on your position. Let us start with plastic manufacturers and their propensity for producing waste. If you operate a plastics plant, what do you do with the waste you produce? A lack of in-house grinding capabilities suggests you send your waste to a landfill. We offer a better solution. We will actually pay you for your plastic waste. Why send it to a landfill when you can make money on it instead? On the other hand, your company might be looking for less expensive recycled materials for manufacturing new plastic parts. Mixing a bit of regrind with virgin plastic fits your plan. Well, we might sell the very kind of regrind youâ??re looking for. The only way to know is to contact us and ask. Plastic regrind is essentially ground-up plastic waste that can be repurposed. It is one of the products we sell to customers all across the country.
Nuovafil has been meeting the expectations of anglers for all their fishing line needs, be it freshwater, saltwater, casting, trolling, drifting or even deep-sea fishing. The line has low stretch and carries negligible memory. Our fishing lines are specially designed to get higher knot strength and improved softness the basic requirement of fishermen and are available in two categories : ACE PRO STANDARD FISHING LINE Ace Pro Fishing Lines are engineered to meet all the required parameters of Sport fishing as well as Commercial fishing. PROLINE PREMIUM FISHING LINE Proline / Ace Angler Lines are designed for higher knot strength and great abrasion resistance with maximum softness
Kubba Tactical waterproof jungle boots Mid-Calf boots. Uppper : Top grain cow leather Nylon Fabric Lining : Nylon Fabric Footbed : PU Sole : Rubber
KUBBA Tactical Police waterproof military boots Mid-Calf boots. Upper : Top grain cow leather Nylon fabric Lining : Nylon fabric Footbed: PU Sole : Rubber
KUBBA Tactical 6.0 Police waterproof military boots 6.0  boots Upper: Top grain cow leather Nylon fabric Lining: Nylon fabric Footbed: PU Sole: Rubber
KUBBA Tactical 6.0 Police waterproof 6.0 boots Steel toes safety shoe 6.0  boots . Upper: Top grain cow leather Nylon fabric Lining: Nylon fabric Footbed: PU Sole: Rubber
