Liquid nitrogen tanks can be divided into two types according to cell storage modes, gas phase and liquid phase storage modes; In the gas phase, samples are stored in volatile nitrogen; in the liquid phase, samples are directly immersed in liquid nitrogen for low-temperature preservation; However, due to different capacities, not all cells can be stored in gas-phase storage mode. Only cells with more than 10,000 cells can use gas-phase liquid nitrogen tanks. If there are more than a thousand cells and need to be preserved in the gas phase, how can this be achieved? You can choose the cryobank series liquid nitrogen tank, which is specially designed for a small amount of cells that require gas phase storage. It has the storage mode of the YDD series and the conventional capacity of the YDS series. It can be regarded as a mini version of the YDD stem cell liquid nitrogen tank or the YDS series liquid nitrogen tank. An upgraded version of the nitrogen tank. The following are the features of cryobank series liquid nitrogen tanks: 1. 4 models, namely 65 liters, 95 liters, 145 liters and 175 liters, supporting the storage of 2400, 3600, 4800 and 6000 2ml cryovials; 2. Each model is equipped with 6 square buckets for storing freezing boxes and freezing tubes; 3. There are two storage modes: gas phase and liquid phase. When storing in gas phase, the temperature at the top of the tank can reach below -190�°C; therefore, it can be called a small gas-liquid-phase liquid nitrogen tank, a small gas-phase tank, and a small low-temperature biobank; 4. Comes with a liquid level sensor that can monitor the liquid level in the tank in real time, which is safe and reliable; 5. Intelligent control display system, real-time monitoring of internal temperature and liquid nitrogen consumption; 6. Vacuum insulation structure and hot gas bypass design ensure uniform and stable internal temperature; 7. It is adapted to the self-pressurizing liquid nitrogen tank and has automatic replenishing function, which is convenient and fast, saving manpower; 8. Supports remote alarm (voice/SMS/WeChat, etc.), and has intelligent local and cloud data backup and export functions. In addition, the small gas-liquid phase liquid nitrogen tank also has the same one-click defogging as the YDD biological sample library, which helps users quickly locate cells and reduces the loss of liquid nitrogen caused by opening the lid. If you have any needs, please contact KGSQ liquid nitrogen tank:
Removable Plate Heat Exchanger: The Removable plate heat exchanger is a new type of high-efficiency heat exchanger composed of a series of metal sheets with a certain corrugated shape. Thin rectangular channels are formed between the various plates, and heat is exchanged through the halves. Plate heat exchanger is an ideal equipment for liquid-liquid and liquid-vapor heat exchange. Under the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tubular heat exchanger, the floor area is one third of that of the tubular heat exchanger, and the heat recovery rate can be as high as 90% or more. This product is suitable for chemical, machinery, food, beverage, medicine, residential heating, hot water supply, air conditioning and other departments. Intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc., soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis cooling, etc. Detachable plate heat exchanger is a new type of energy-saving heat exchange device with high heat transfer effect, compact structure, small footprint, easy operation, convenient cleaning, disassembly and maintenance, and easy to change the heat exchange area or process combination, etc. advantage. 1. The Removable plate heat exchanger has a compact structure with a small footprint, and the heat exchange area per unit volume is 2 to 5 times that of the shell-and-tube type. Unlike the shell-and-tube type, the maintenance site for drawing out the tube bundle is not reserved, so the same For heat exchange, the plate heat exchanger covers an area of â??â??about 1/5~1/8 of the shell and tube heat exchanger. 2. It is easy to change the heat exchange area or process combination. As long as a few plates are added or reduced, the purpose of increasing or reducing the heat exchange area can be achieved; by changing the plate arrangement or replacing a few plates, the required process combination can be achieved. It is almost impossible to increase the heat transfer area of â??â??shell and tube heat exchangers to adapt to new heat exchange conditions. Removable plate heat exchanger is a kind of heat exchanger that is widely used in heat exchangers. It is widely used in chemical, machinery, food, beverage, medicine and other occasions. Users should select and use according to actual needs and the advantages and characteristics of heat exchangers are used to choose, and well-known brand products are also very important.
Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life. The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive. Parameter Material: stainless steel 304, 304L, 316, 316L Length: 10-1500mm Diameter: 10-80mm Wall thickness: 10-50mm Filtration accuracy: 0.2-300um Layers: Single, 2 to 3, 5-layer & 6-layer or customized Porosity: 35%-80% Service temperature: -200 C to 1000 C Features: 1.) Better mechanical properties; 2.) Good stable pore size; 3.) Easy cleaning, reusable and durable; 4.) Stable pore shapes for perfect permeability; 5.) Reliable quality, big particles filtration; 6.) Attractive surface; 7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling; Application 1.) Oil & Gas production 2.) Water treatment; 3.) Food and beverage; Â 4.) Pharmacy; Â 5.) Chemical industry; 6.) Polymer filtration; Â 7.) Refine; Â 8.) Energy & nuclear. Process Description Through a number of technological procedures, sintered wire mesh is created. To achieve adequate contact at wire mesh intersections, precision woven wire mesh is evenly calendered.Then, under mechanical pressure in unique fixtures inside a hot furnace, one or more layers of this calendered web are laminated. The furnace is heated to the sintering temperature while being surrounded by a special environment of inert gas.The individual wires and each layer of wire have been bonded together after being carefully cooled, making the mesh solid. Compared to ceramics and sintered metal powder/particles, it has more favorable overall characteristics. Sintered mesh filters are very durable. The filter element, which is simple to maintain and has a long lifespan, can be created without the need for internal assistance.
ASTM Ss 201 304 309S 310 316 904L 410 420 430 2205 2507 Welded Steel Pipe Seamless Stee Pipe Cold Hot Rolled Round Pipe Stainless Steel Pipe for Decoration Standards:ASTM, GB, JIS, DIN, EN, AISI,ASTM A312 / ASME SA312, GB/T 13296,GB/T 14975,GB/T 14976 Materials:Stainless Steel/Galvanized/Carbon/Aluminum/Alloy Steel/Cooper 200 Series:201, 202, 202cu, 204cu 300 Series:301,303,304,304/L/H, 305,314, 316/L/H/Ti, 317, 317L, 321, 347,347H, 309, 309S, 310S, 400 Series:409, 410, 416, 420, 430, 431, 440c, 441, 444, 446 Duplex Steel:904L, 2205(UNS S31803/S32205), 2507(UNS S32750), 2101, 2520, 2304, 254smo, 253mA,UNS S32760, Special:2507, 316Ti, 316LN, 347H, 317L, 310S, 253MA, RA330, 725LN, 724L etc. Size:10.3*1-2.41,13.7*2.24-3.02,17.1*2.31-3.2....1219*9.53-12.7 Length:1.0-12m or as customer's requst,fixed length random, Outer Diameter: Stainless Steel  Seamless Pipe:4mm-914.4mm Stainless Steel  Welded Pipe:single slit(8mm-630mm); girth(630mm-3000mm), Thickness: Stainless Steel Seamless Pipe:0.6mm - 60mm Stainless Steel Welded Pipe:single slit(0.5mm-25mm);girth(3mm-45mm) Manufacturing Shapes: Seamless Pipe:Hydraulic, Round, Square, Hex, Honed,Rectangular,Oval Welded Pipe:Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) Surface Finish:No.1, No.4, No.8 Mirror Finish, 2B,Finish as per customer Requirements Surface:Mirror Polished/Polishing/Annealing/Pickling/Bright/Black Packing: Pipe/Tube/Bar:Plastic bags for each piece then packed in seaworthy wooden cases 1. each tube is packed with pipe end caps and plastic bag individually, then packed into woven belt or wooden box. 2. bundle packing. 3. as customer's requirement. Plate/Coil/Strip:Standard seaworthy packing(plastic&wooden) or according to the customer's requests
1. Variety: Grade1, Grade 2,Grade 3,ORQ,R3,R3S,R4 stud link anchor chain; studless anchor chain; buoy chain,D-type anchor shackle; Hatch-cover chain,lifting chain,kiln chain and others; DIN Standard chain; Special chain as per your requirments and their accessories. 2. MATERIAL GRADE: ANCHOR CHAIN:GRADE 2/U2, GRADE 3/U3� MOORING CHAIN:ORQ,R3,R3S      3.Material:20Mn (CM490),30Mn(CM690) 4.Length: 25m or 27.5m or as per your request. 5. FLASH BUT WELED 6.Surface: Self Color, Black Painted, Hot Dip Galvanized 7.Relevant Certificates: ABS, BV, CCS, DNV, KR, LR, GL, NK and RINA etc. 8. Grade U2 / U3 from 12.5mm to 162mm; Grade ORQ / R3 /R3S / R4 from 58mm to 162mm 9. accessories: kenter shackle, joining shackle. anchor shackle,pear type joining shackle                             buoy shackle type A, Swivel shackle                             pear type link, trangle plate. 10.Difference between Stud link chain and studless chain: Originally studs were added to the chain to stiffen the links preventing them from severely deforming when overloaded. They have the added advantage in that they prevent the chain from knotting up when twisted, thus avoiding problems when chain is retrieved with a windlass. 11.Packing: Wire Rope Bundled, Ton Bag, Wooden Box, as required Using range:a.Marine chain b.Fishing &boat chain;c.Mine chain;d.Cement lifting round chain. 12. Shipping port: Qingdao port/Shanghai port
HDPE Compact Plastic Ball Valve 1) Material: quality PE100 2) Sizes: 20mm -- 110mm 3) Pressure Rating:1.6MPa 4) Colors: black 5) Connection: hot melt fusion 6ï¼?with plastic ball inside Applications: 1. City and town dringking water supply system 2. Sea bed water supply system 3. Food and chemical industry 4. Replacement of cement pipes and steel pipes 5. Argillaceous silt, mine,mud transportation 6. Irrigation and garden green pipe networks and sewage treatment 7.Nature gas supply system With many yearsâ??export experiences, our HDPE Valves, HDPE Stop Valve, HDPE Compact Plastic Ball Valve, HDPE Steel Core Ball Valves, HDPE Double union Ball Valves have been welcomed in international markets. Features: 1. Chemical stability. Polyethylene does not erode to acid, alkali and salt. In addition micro-organism like bacteria or seaweed cannot grow in Polyethylene material. 2. Hygiene. Optimal conditions as pipes for providing portable water are met not only in that purity of contents can be maintained but also the taste of water does not change. 3. Fluidity. , PE water pipes smooth inner walls prevent blocking of pipes and minimize loss of water. 4. Flexibility. , PE water pipe is convenient to install because curved fittings don not have to be used at bent position and flexibility is maintained at low temperature. 5. Light weight. , PE pipes can be easily handled and installed because the weight of PE water pipes is just 1/7 of steel pipes 6. Perfect connection. Quick and perfect laying of pipes is possible because heat fusion connection is used for PE water pipes. 7. Non-corrosiveness. PE pipes do not corrode by chemicals, electricity, damp ground and salt. 8. Impact endurance. The pipes don not break by outer impact due to the characteristic of the material. 9. Cold endurance. The pipes do not break up to -70 degree 10. Long life. The pipes can be used for at least 50 years. 11.Green intiative,PE is a recycled material,environment friendly. 12.Low system cost,less maintenance costs,reduce the cost for the project Rongde is a professional manufacturer of HDPE Plumbing, PPR Plumbing, Pert Tubing, PEX Tubing, PVC Plumbing, Aluminium Plastic Composite Pipe, Shower Hose, Home Floor Heating Tubing, Bathroom Shower Hose, Industry Agriculture HDPE Plumbing etc. Our products have high quality and competitive prices.
Lead edge feeder Printing Machine Model UP1-140-900 UP1-140-1200 UP1-140-1400 Color Group Everything can be equipped according to userâ??s needs. Printing Paper A, B, C, A/B, B/C, A/B/C. Production Speed 180pcs/min 160pcs/min 140pcs/min Max. Paper Sizes 900*1800/2000/2200/2400/2600mm 1200*1800/2000/2200/2400/2600mm 1400*1800/2000/2200/2400/2600mm Min. Paper Sizes Positiveknife 300*640mm 350*720mm 400*720mm Negative knife 300*720mm 350*740mm 400*740mm Max. Printing Sizes 900*1600/1800/2000/2200/2400mm 1200*1600/1800/2000/2200/2400mm 1400*1600/1800/2000/2200/2400mm Max. Die-cutting Sizes 900*1700/1900/2100/2300/2500mm 1200*1700/1900/2100/2300/2500mm 1400*1700/1900/2100/2300/2500mm Standard PrintingPlate Thickness 7.2mm Slot Width*Max. depth 7*220mm 7*300mm 7*350mm (Number of blade and slot depth may be added) Min. SlotSpace Positiveknife 150*150*150*150mm 170*170*170*170mm 170*170*170*170mm Negativeknife 250*90*250*90mm 260*90*260*90mm 60*90*250*90mm Printing Roller Dia. 300mm 408mm 480mm Performance of the main mechanisms: 1.Designed according to the high request and the reliable function, the operation of the machine is humanization, can accomplish the setting, revision, implement, replacing and memories function in a shot time , and display with an exact data. 2.Main motor frequency convert to control. 3.All the drive rollers adopted high quality steel materials, hard chromium plating and the surface treated by lapping finish. 4.Driving gear : Material is 20 CrMoTi alloy steel teeth , carburizing treatment , fine grinding. 5.The main drive roller adopt keyless connect , decrease the connection gap , guarantee the printing precision. 6.The machine adopt PLC control , with automatic zero return and memories function. 7.Use sun feeder for feed the cardboard. 8.Option: rotary die-cutter, rotary slotter. Hot sale various high quality Carton Cardboard Machine, Folder Gluer Machine, Lead Edge Feeder Printing Machine, Automatic Die-cutting Machine, Manual Die-cutting Machine, Gift Box from China leading manufacturer. Our Carton Cardboard Machine are high quality, cost effective and deliver more benefits. Welcome to choose us!More information please view here.
Intelligent Mobile Waste Compress Equipment SMALL AND MEDIUM SIZE WASTE TRANSFER STATION SYSTEM WASTE TRANSFER STATION SYSTEM This equipment has the compressor head integrated with the main body. It can be discharged during waste transfer and it s suitable for transfer station with capacity less than 80 tons, such as main waste station of a county or a town, also including residential unit, industrial zone, economic development zone, office building, commercial building, square or city avenue. This equipment has the compressor head integrated with the main body. It can be discharged during waste transfer and it s suitable for transfer station with capacity less than 80 tons, such as main waste station of a county or a town, also including residential unit, industrial zone, economic development zone, office building, commercial building, square or city avenue. It needs no specific station installation, which saves the economic costs and time for infrastructure construction and also reduces space occupation. The equipment is fully sealed up, allowing no waste leakage and secondary pollution during the process of collecting, compressing and transfer. Although the machine dimension can be customi zed, we have 8, 12, 17 or 20 cubic meters as standard models. The compressing direction of this equipment is horizontal. Comparing to other similar products, the machine is better sealed up and well designed with a higher automation level and operation convenience. Main Features The main body of the compressor is made of highly weather resistant steel plate by soldering. It s well produced for its fine appearance, light weight, high endurance and corrosion resistance. The compressor head is double curved with a pleasing waste breaking rate and compression efficiency. Cooler is optional for hydraulic system in order to permit a long time functioning in open air environment in hot seasons. Security device: 1.� Optional infrared camera inside the compression chamber and the main body of the equipment in order to monitor the conditions and waste quantity inside. 2.� Main power lock and emergency button for safety consideration. Waste liquid control system in the container, including doble locks device and backdoor seal control to avoid secondary contamination during transportation. Hydraulic system in the chassis of the equipment in order to control the backdoor of the equipment. Orders can be sent in the operator room to open or close the backdoor and activate the discharge. Buffer device on the feeder for the purpose of avoid damage of feeding hopper or waste container caused by the collision of the ground. Small space occupied. Flexible transfer with no infrastructure needed. Several compressors can rotate for one single truck in order to gurantee a better working efficiency.
Specification Details: 1) Gr. 4130 Chemical Component Analysis(%): C: 0.28-0.33; Mn: 0.40-0.60; Si: 0.15-0.35; S: < 0.040; P: < 0.040; Cr: 0.80 -1.10; Mo: 0.15-0.25; 2) Monthly Capacity: 6000 tons. 3) 4130 SR Condition's Mechanical Properties: Ultimate Strength: > 724Mpa; Yield Strength: > 586Mpa; Elongation: > 10%; Rockwell Hardness B Scale: 95; 4) Delivery Condition: Annealed(A), Bright Annealing, Normalized(N), Stress Relie f Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 5) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-DIP paint black with two plastic caps on each end 6) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 7) Relevant Test: ASTM 519-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield Strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 8) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 9) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 10) Packing Type: Round, Square, Rectangle, Hexagon. Streamline, etc; 12) Applications: Automobile Industry, Mechanical & Engineering, Fluid Power, etc. 13) Place of origin: China 14) whatsapp: 0086 13812877559 15) e-mail: tubesolution at sina.com Commercial Information: 1) Delicery time: (45-60) days ready at mil also according to the actual weightl; 2) Minium order: 5 Ton; (some specification are excepted) 3) Term of payment: T/T or L/C; 4) Delivery Port: Shanghai Port; 5) Offer Validity: 5-7 Days; 6) Container: 20GP or 40GP or Bulk; 7) Manufacture methods: Cold Finished method or hot finished Method.
Liquid nitrogen tank is one of the indispensable equipment in the laboratory, and its quality and performance largely determine the experimental results of the laboratory. So what are the advantages and uniqueness of the laboratory liquid nitrogen tank? 1. Large caliber design for easy sample pick and place; 2. Larger capacity for sample freezing; 3. Good cryogenic storage performance and low liquid nitrogen consumption; 4. Light weight and small space occupation; 5. High-strength neck tube design reduces liquid nitrogen loss; 6. Multi-layer adiabatic vacuum design to reduce heat radiation; 7. Intelligent monitoring system can be configured to realize remote monitoring; 8. Long vacuum quality assurance period; 9. Product CE certification; TIANCHI lab series liquid nitrogen tanks are made of special aviation aluminum material, featuring low liquid nitrogen evaporation, light weight, large capacity sample freezing and storage, etc., which can meet the different needs of laboratory professionals. They are available in a wide range of models and are equipped with freezer racks and PC cartridges for easy storage of samples. TIANCHI laboratory series liquid nitrogen tanks are also factory-directly and independently produced, and have passed CE and ISO9001 certificates, with guaranteed quality and after-sales service. We have cooperated with animal husbandry bureaus, farms, universities, scientific research institutes, laboratories, medical units and other countries, and have won the relevant projects time and again. If you have any requirements, please contact us, looking forward to your visit and consultation.
YDS-10 liquid nitrogen tank Product introduction: YDS-10 is the most commonly used storage liquid nitrogen tank. It is widely used in animal semen storage in animal husbandry and can also be used for cryogenic preservation of samples and mechanical parts. Made of all-aluminum structure technology, high vacuum multi-layer super insulation structure. It has the advantages of being compact, lightweight, easy to carry, low daily evaporation rate of static liquid nitrogen, economical and practical. Product parameters: Model: YDS-10 Geometric volume (L):10.8 Caliber(mm):50 Static liquid nitrogen evaporation capacity (L/D): 0.08 Static liquid nitrogen storage period (d): 105 Outer diameter of lifting tube (mm): 38 Lifting tube height (mm): 120 Number of lifting tubes (ea): 1-6 pcs Quantity of 0.5ml cryovials: 792 Quantity of 0.25ml cryovials: 1788 Height (mm):580 Outer diameter (mm): 334 Empty weight (kg):5.8 Optional accessories: 3 buckets, lock lid, neck stopper, protective cover Product Features: 1. Made of lightweight and strong aluminum material; 2. Can store large-capacity frozen fine tubes; 3. High vacuum multi-layer insulation design to reduce liquid nitrogen evaporation loss; 4. Equipped with a protective cover to prevent the jar from being bumped during use; 5. Optional safety lock cover structure, safe and beautiful; 6. Different calibers to choose from, easy to pick and place; 7. EU CE certification; 8. Five-year vacuum warranty; Tianchi KGSQ is a professional manufacturer of cryogenic vessels with more than ten years of experience. Our products are widely used in animal husbandry, scientific research institutions and university sales. We don't recycle any of our products, so you can have confidence in our products. If you want to become our dealer, please contact us.
0.008mm Insulated Sliver jump wire PCB Repair flying line For iPhone Motherboard PCB Welding Repair Tool. MY-F008 0.008 200M solder wire for motherboard fingerprint CPU IC welding repair. Features: 1. Diagmeter 0.08 mm insultaed copper logic board jump wire. 2. Fully shielded and insulated, Insulated magnet jumper wire. 3. Running Long Jumpers Without Worrying About Shorting Out Components 4. It's made of copper, and not the common enameled wire, the surface is conductive. 5. Durable,Tensile, great for running long jumpers without worrying about shorting out components along the way. 6. Super compacity: for phone logic boards link wire copper and soldering wire for motherboard BGA chip welding repairing. 7. Options: 1 Pcs 0.08mm 50m/200m are available. Product Specifications: 1. Material: Plastic,Metal,Sliver 2. Weight: 0.05kg/0.08Kkg 3. Length: 50m 4. Diagmeter: 0.01mm/0.02mm 5. Color: Metal/Sliver 6. Type: Logic board Jump Wire 7. Application: for Motherboard BGA chip Welding Repairing 8. Customized: Yes 9. Function: Insulated magnet jumper wire for running long jumpers 10. Insulation or: Insulated 11. Type: PCB welding tools 12. Usage: Logic board BGA chip Welding
It is a ready-made business: German SPINNBAU DILO production line for the production of non-woven polyester fiber. Year of fabrication 1986. Factory works, is located in Ukraine. Lines composed of: 1. 1 un. Hopper 2. 1 un. Vibrating well (Fullschacht) feeder by Temaf 3. 2 un. Double doffer carding machine by SPINNBAU TYPE 216 working width: 2300 mm 4. 1 un. Horizontally crossed spreader C70 by AUTEFA Autefa C70 cross-lapper 1 pcs. year: 1986 working width: 220-230 cm input: 250 cm output: 330 cm 5. 1 un. Pre-Needle loom by DILO type OD-1-35, working width: 3300 mm, 14 000 needles 6. 1 un. Quadro-punch needle loom by DILO type OUG I 30 working width: 3000 mm needles quantity: 12 000 + 12 000 top boards, 12 000 + 12 000 bottom boards, total 48 000 needles 7. 2 un. Quadro-punch needle loom by DILO type OUG II 30 working width: 3000 mm needles quantity: 12 000 + 12 000 top boards, 12 000 + 12 000 bottom boards, total 48 000 needles 8. 2 un. Accumulator WSP 30/30, 3000 mm, 30 m 9. 1 un. cutter by DILO RS/m 10. 1 un. Roll winder SW 30, 3000 mm, D max 1600 mm 11. 1 un. bag filter 12. All electric motors and control panels Scope of use and application of non-woven fabric: Construction work Installation of drainage systems Construction of roads and paving stones Landscape design Installations of swimming pools and strengthening of coastlines Textile and footwear industry Bases for linoleums
Technical feature: Stable structure with high brazing speed(about 4.5-12 seconds needed per tooth) The electronic control system automatically from takes , changes, installs and welds, and the whole process takes 10-15 seconds. Changeover mainly by inputting data into the machine control Both sides cylinders automatically fixed saw blades to improve precision. The high frequency heating system and Ceia induction heating system control the temperature automatically. The accuracy of controlled temperature is �±1â?? to ensure brazing strength and heating stability. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Suitable for mass production, one person can control 12 equipment at the same time Technical description: Sorting and feeding of the carbide tips through the automatic feeder and conveyor belt. Dosing of the flux onto the carbide tips. Cutting of the silver wire or soldering platelets from a coil and stamping onto the carbide tips. Dosing of the flux onto the silver welding wire or silver brazing foil. Transferring the prepared carbide carbide tips into the ceramic-equipped and water-cooled soldering tongs. Brazing of the carbide tips onto the saw blade. Loading and unloading of the unbrazed and brazed saw blades automatically by robot system. Technical data: Diameter of saw blades 100mm-400mm Rake angle -5 +25 Carbide tips width: 1.5mm 11.5mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm 5.0mm Speed of brazing : 4.5 12s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm 5.0mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Weight: 500KG Dimension : 1600mm *1200mm *1700mm Time of change blades 8 15s/pcs
Ultima trading is engaged in the production, export and distribution of wood products and agricultural goods to European countries. Thanks to the quality of our products, well-established logistics and customer support from start to finish, we have taken a leading position as an exporter of heating products from Ukraine for 5 years, so more than 50 companies cooperate with us. In 2022, we have significantly increased our production capacity, so we are looking for new partners around the world. All products comply with Ukrainian and European standards, DIN+. FSC 100% certified products Unleash the power of Nestro Briquettes! With high heat output, easy handling, and clean burning, our briquettes offer a premium heating solution. Stay warm, save money, and reduce your environmental impact. Upgrade to Nestro Briquettes and experience the ultimate in efficiency and comfort. Transform your winter today! Production capacity: -500 tons per month price: 220 â?¬/ton Types of wood: -Pine -Oak Technical info: - Mass fraction of total moisture Wr: 7.3% - Mass fraction of total ash Ad: 0.5%. - Lower calorific value: 15.44 MJ/kg - Mass fraction of volatile carbon: 13.5% Advantages: - High energy efficiency. - Consistent quality. - Clean and environmentally friendly. - Long burn time. - Easy handling and storage. Packaging: - Shrink plastic wrap: 10kg~5 pcs/package - Boxes - Polypropylene bags - Big bags Branding: - Private label leaflets - Private label stickers Lead time: -7 days Delivery info: - inland, by sea - door-to-door delivery - delivery terms: FCA, DAP, DDP, FOB, CFR, CIF Logistics info - 96 packs/pallet - 960kg/pallet - Truck capacity: 21-23 tons Other products by Ultima: 1. Lump wood charcoal 2. Apple wood charcoal 3. Wood pellets 4. A1 EN Plus wood pellets 5. Pini Kay wood briquettes 6. Ruf wood briquettes 7. Firewood | nets 8. Firewood | crates 9. Fence posts We are looking for international customers for long-term cooperation!
Description EXC-W62CBL full color series are high power outdoor landscape LED wall washer with high strength aluminum alloy housing by EXC-LED. EXC-W62CBL can be used for accent lighting or flood lighting, such as building facade, bridge, stage, etc. Customized lighting fixture length available. Features The newest generation technology: DMX512 parallel bus design Unique waterproof and breathable design Low thermal resistance path heat dissipation design Outdoor lightning protection and electrostatic discharge (ESD) protection design Projection distance: 1-5m Basic Specifications Color Range:RGBW, RGB, W(2200K-6500K) Light Source:18(RGBW), 36(W, RGB, RGBW) pcs LEDs Working Voltage:DC 24V Max. Power Consumption:36W(RGBW, RGBW), 72W(white, RGBW ) Control:DMX512, ON/OFF Segment:1 Grey Scale:8bit, 16bit Source Life:50,000 h RDM:Optional LED chip Brand:Optional(Cree, OSRAM, Lumileds, Epistar, etc...) Housing :High Strength Aluminum Cover:Tempered glass Weight:2.5KG Working Temperature: -40 C to 60 C Storage Temperature: -40 C to 70 C Protection Rating: IP66 Efficiency flux:75LM/W(white), 25LM/W(RGB), 35LM/W(RGBW) Beam Angle XP series: 8 10 15 15*30 30 60 CREE 5050 RGBW(four in one) /XMLRGBW(four in one) 15 30 45 60 15*30 and other beam angle available
ZB6805-1005 Name European type closed body turnbuckle Material stainless steel 316 Suface finish Mirror polishing MOQ 1 PC Technqiue investment casting Packing opp bag+ carton Brand Richwits Speficication of stainless steel European type closed body turnbuckle ThisEuropean open body turnbuckle is casted by precision casting in material stainless steel 316 . Surface is polished The surface is mirror polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance . High Quality with 316 Stainless Steel - This RECTANGLE/ SQUARE sun shade sail installation kit is made of high quality 304 grade stainless steel.It is extremely strong and resistant to the elements.10 sizes are available for you ï¼? M4*2 M5*2 M5*2.5 M6*3 M8*4 M10*5 M12*6 M14*7 M16*8 M20*10If there is no size you need, please feel free to let us know.Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.Most of them can be supplied from stock. Low MOQ is acceptable.Contact us now for more details!
Offering Fresh Ginger for Grade AAA (High Quality). This ginger rhizome is larger and more mature than the red ginger and Java ginger, this ginger plant has clumps that weigh around 1.50 - 2.00 kg/clump. The content contained in this ginger, among others, essential oil 0.82-1.66%; starch content was 55.10%, fibre content was 6.89% and ash content was 6.6 - 7.5%. This ginger has a large, flowery rhizome, yellowish-white with a diameter of 8.47 - 8.50 cm, less sharp aroma, height and length of rhizome 6.20-11.30 and 15.83-32.75 cm, light green leaf color. 1. Cultivation Type: Conventional 2. Weight: above 50 - 200 Gr up per pcs 3. Grade: AAA (High Quality) 4. Maturity: 70 to 95% or Negotiable 5. Color: Yellowish-white 6. Taste: Less spicy and the aroma is less pungent than other types of ginger 7. Shape: Big size and fat 8. Scientific Name: Zingiber officinale 9. Seasonality: All year supply 10. Place of Origin: Indonesia 11. Port Of Loading: Tanjung Priok, Jakarta / Soekarno-Hatta Airport 12. Payment Term: T/T 50% Down Payment and 50% after copy Bill of Lading ..... OR ..... 100% L/C At Sight 13. Delivery Time: Shipment within 2 to 3 weeks (for the first-time buyers) 14. Documents: Original Bill of Lading/Airway Bill, Commercial Invoice & Packing List, Phytosanitary Certificate, Certificate of Origin Minimum Order Size and Packaging Details : 15. Packing with 20 to 50 kg mesh bag / 5 to 20 kg corrugated cardboard box, according to buyer requirement. Washed with clean water 16. Minimum Order Quantity by Sea is 20ft reefer container 17. Minimum Order Quantity by Air is 1 MT
Weight : 820 kg Battery : Leoch AGM Battery 6V 225Ah/3H * 8 PCS Motor : AC 48V 5 KW motor Controller : 48V 450A Charger : On board charger 48V 30A Rear Cargo Box : 600*1100*230 mm 170 KGS Suspension : Front: McPherson independent suspension Rear: trail arm suspension Steering Self compensating rack & pinionâ steering Passenger Capacity : 4 Driving Distance : 65 km Max. Speed : 20 km/h Minimum Turning Radius : 4.5m Max. Climbing Ability : 20% Minimum Ground Clearance : 170 mm Overall Dimensions : 3774*1260*2075mm Brakes : Hydraulic brake system (front disc + rear drum + foot brake for parking) Chasis Steel Wheel Base : 2420mm Front Wheel Tread : 950mm Rear Wheel Tread : 1000 mm Tires : 12 inch aluminium rim with 20 inch low profile heavy duty tire Braking Distance : 6m Windshield : DOT glass windshield with wiper Dashboard : Stereo system (bluetooth control player + 2 speakers) , USB port and 7 inch speedometers with back-up camera Reversing Alarm Body : Fiberglass / Plastic Roof : Plastic with solar panel Steering System : Self compensating â??rack & pinionâ?? steering Brake System : Hydraulic brake system (front disc + rear drum + foot brake for parking) LED Light System/ Complete headlights, 2 front turn signals, 2 taillights (each combined 1 brake light with 1 turn signal, LED lights), with DC-DC converter (converting from 48V to 12V), horn. Accelerator : Adjustable inductive accelerator continuously variable speed system Driving Mode : Electromechanical integration Rear Axle : Integrated Nerf Bar : On both sides of the car Rain cover : Transparent rain cover Premium Seat : White and red Seat Belt : With three points retractable Mirror : LED side view mirror & inner 5 panel view mirror Steering Wheel : Sports steering wheel
MS5 1000X Digital Microscope HD 1080P 8LED USB WiFi Electronic Microscope Mobile Phone Microscope for Smartphone, Computer, iPad, PCB Inspection, Biology lab, science research student education. Description: Eight bright white light LED light fill light easily deal with all kinds of energy use, day and night scene. The adjustable 50 x-1000 x focusing let the one-handed operation more convenient. Support horizontal and vertical 360 vision no dead Angle observation, up and down at the bottom have prevent slippery effect. Support USB micro type-c a variety of functions, multiple choice. Suit for Gem testing, circuit board testing, auxiliary teaching, textile testing, watch repair, check the skin ect. Specifications: Item name: Electronic microscope Color: Black Product type: MS5 Lens optical size: 1/6.5 Signal-to-noise ratio: 42dB Sensitivity: 2.5V/ Lux. s Photograph Resolution: Video resolution: 640x480, 1280 720, 1920 1080 Video format: MOV Focus mode: Manual Image format: JPG Magnification: 50x-1000x Light source: 8 LED lights (brightness adjustable) Focus range: 10~40mm (can view the perspective) WiFi distance: Within 3 meters White Balance: Automatic Exposure: Automatic PC OS: Windows XP, Win7, Win8, Win10,for Mac OS X 10.5 or higher. Lens structure: 2G+IR Aperture: F4.5 Lens Angle: 16 Interface and signal transmission mode: Micro/ USB2.0 Storage temperature/humidity: -20 60 10-80%RH Operating current 250 m Power consumption: 1.25 W App working environment: Android5.0 or above, iOS 8.0 or above WiFi implementation standard: 2.4GHz (IEEE 802.11b/g/n) Packing list: 1 x Microscope main body 1 x Bracket 1 x Instruction 1 x Calibration ruler 1 x USB data cable 1 x Installation CD (including driver software, measuring software, system components, user manual)