Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V 5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30â?? +55â?? Insulation performance 1M�© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NGM-5.1 Rail Profile Grinding Machine This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency. BENIFITS â?? Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled â?? Equipped with spark protection device â?? Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone â?? Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it Specification Model NGM-5.1 Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) 1500 * 450 * 750 mm Engine HONDA GX270 Power 5.1 kW Grinding wheel specifications �?125x65 mm Feeding accuracy 0.1 mm Turning angle of grinding stone �±90�° Spindle revolution 4100r/min Grinding stone feeding stroke 42 mm Profile wheel span 1000 mm Weight 100 kg Weight of supporting rod 14 kg
Place of Origin Hubei, China Type Sleeper Drilling Machine Material Stainless Steel Dimensions (L x W x H) (mm) 420*500*1070mm Brand Name Linkage ENGINE 2 stroke petrol engine 1.42kW Max. drill diameter 20mm Drill speed â?¥350r/min Drill speed2 â?¤20s Weight 14kg NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits.
Unit :- kg Min qty :- 5 kg Grade :- Medicine Grade Type :- Dry powder Organic :- Yes Life :- 8 Month Purity :- 99% Usage/ Application :- Tea & Pharmaceuticals Product description :- Lowers blood pressure levels: nettle tea contains phenolic compounds with diuretic properties, which aid in reducing blood pressure Promotes weight loss: nettle tea((herbal) ) is a powerful detox drink due to its diuretic properties and its ability to flush out toxins from the body. Drinking a cup of nettle tea twice daily, can increase nutrients and optimize metabolism, thus helping in weight loss Boosts immune system: nettle leaf(dried) tea has strong antifungal and antibacterial properties. The flavonoids and carotenoids found in the tea, along with the high concentration of vitamin c, make this beverage an effective immune system booster. By freeing up your immune system from fighting oxidative stress, nettle tea can work as your first line of immune defence Reduces pms symptoms: it cleanses your liver and enhances the livers ability to process estrogen more effectively, which reduces pms symptoms.
Portable Rolling Track Gauge is mainly used for railway track gauge and superelevationcant check rail gauge and back to back distance measurementIt can be used for track inspection and fine adjustment of rail gaugeThis product has the advantages of fast measuring speed stable pushing rod easy to carryand nighttime and tunnel worklegible even in direct sunlight are supportedIt is an ideal measuring tool for track finetuning track constructioninspection and track laying Features The benefits of our rolling gauge 1 Measure the track gauge cant without bend over your back 2 Light weight around 65kg one person operation 3 BT connection data uploading and analysis system 4 High working efficiency Save your man power 1 man with 1 rolling gauge 4 man with 4 normal digital track gauge Specification Model 1435mm GJCJJG0 Track gauge 14101470mm Superelevation measuring range 185185mm Display mode OLED display and handheld terminal display Supply Voltage DC34V52V rechargeable battery Superelevation division value 005mm Working temperature 3055 Insulation performance 1M Track gauge division value 001mm Superelevation division value 005mm Track gauge max indication error 025mm Superelevation max indication error 03mm Length1700mm Net Weight 65kg
expertbinocular * com Product Info for Kenko Lens2scope Adapter for Nikon F Mount (Angled View) Kenko black Lens2scope Adapter for Nikon F Mount is a simple accessory that converts any Nikon F Mount lens into a spotting scope. Its lightweight body houses a compact roof prism, lenses, and an eyepiece just like a traditional spotting scope and with the lens is attached, the whole system acts as a spotting scope. This model features an angled eyepiece that is set at a 45�° angle for more comfortable viewing while sitting, standing or laying. Kenko K-LS10-NFAB Specs Prism System Roof prism Focal Length 10 mm Apparent Field of View 42�° Eye Relief 20 mm Dimensions 7.1 x 4.3 x 3.1" / 18.0 x 11.0 x 8.0 cm Weight 6.5 oz / 185.0 g Packaging Info Package Weight 0.635 lb Box Dimensions (LxWxH) 6.1 x 4.35 x 3.5"
Technical Parameters: Work table size (LxW): 800x800 mm; No. of table: 1 pc; Minimum indexing unit: 1 deg.; Maximum loading capacity of work table : 2000 kg; X/Y/Z Axis travels: 1600/1050/1200 mm; Distance from spindle center to table surface: 50-1100 mm; Distance from spindle nose to table center: 200-1400 mm; Spindle taper: BT50 ; Main spindle speed: 6000 rpm; Main motor power: 15/18.5 kw; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 12/12/12 m/min; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 125/220 mm; Maximum length of tool : 350 mm; Maximum weight of tool: 25 kg; Tool change time(T-T): 5 sec; Positioning accuracy (X/Y/Z): 0.010/0.010/0.010 mm; Repeated positioning accuracy (X/Y/Z): 0.005/0.005/0.005 mm Positioning accuracy(B): 10 arc.sec. Repeated positioning accuracy(B): 2 arc.sec. CNC Controlling system: Fanuc ; Machine weight: 16000 kg;
Technical Parameters: Work table size (LxW): 630x630 mm; No. of table: 1 pc; Minimum indexing unit: 1 deg.; Maximum loading capacity of work table : 1500 kg; X/Y/Z Axis travels: 1200/850/1000 mm; Distance from spindle center to table surface: 30-830 mm; Distance from spindle nose to table center: 100-1100 mm; Spindle taper: BT50 ; Main spindle speed: 6000 rpm; Main motor power: 15/18.5 kw; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 20/20/20 m/min; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 125/220 mm; Maximum length of tool : 350 mm; Maximum weight of tool: 25 kg; Tool change time(T-T): 5 sec; Positioning accuracy (X/Y/Z): 0.010/0.010/0.010 mm; Repeated positioning accuracy (X/Y/Z): 0.005/0.005/0.005 mm Positioning accuracy(B): 10 arc.sec. Repeated positioning accuracy(B): 2 arc.sec. CNC Controlling system: Fanuc ; Machine weight: 8000 kg;
Technical Parameters Table size (LxW): 2000x900 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 2000 kg; X/Y/Z Axis travel: 1800/900/800 mm; Distance from spindle nose to table surface: 150-950 mm; Main spindle speed: 8000 rpm; Spindle motor power: 15/18.5 kw; Spindle taper: BT50 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 24/24/24 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.015/0.012/0.010 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 112/220 mm; Maximum length of tool : 350 mm; Maximum weight of tool: 18 kg; Tool change time(T-T): 2.5 sec; CNC Controlling system: Fanuc ; Machine weight: 15000 kg; Machine overall size: 6000x3100x3300 mm;
Technical Parameters Table size (LxW): 1600x800 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 1500 kg; X/Y/Z Axis travel: 1500/800/700 mm; Distance from spindle nose to table surface: 150-810 mm; Main spindle speed: 8000 rpm; Spindle motor power: 15/18.5 kw; Spindle taper: BT50 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 24/24/24 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.015/0.012/0.010 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 112/220 mm; Maximum length of tool : 350 mm; Maximum weight of tool: 18 kg; Tool change time(T-T): 2.5 sec; CNC Controlling system: Fanuc ; Machine weight: 14000 kg; Machine overall size: 6000x2850x3000 mm;
Technical Parameters Table size (LxW): 1400x800 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 1000 kg; X/Y/Z Axis travel: 1300/800/700 mm; Distance from spindle nose to table surface: 150-810 mm; Main spindle speed: 8000 rpm; Spindle motor power: 15/18.5 kw; Spindle taper: BT50 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 24/24/24 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 112/220 mm; Maximum length of tool : 350 mm; Maximum weight of tool: 18 kg; Tool change time(T-T): 2.5 sec; CNC Controlling system: Fanuc ; Machine weight: 10000 kg; Machine overall size: 5500x2850x2000 mm;
Technical Parameters Table size (LxW): 1400x700 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 600 kg; X/Y/Z Axis travel: 1300/700/700 mm; Distance from spindle nose to table surface: 150-810 mm; Main spindle speed: 8000 rpm; Spindle motor power: 11/15 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 24/24/24 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 10000 kg; Machine overall size: 5500x2650x2600 mm;
Technical Parameters Table size (LxW): 1300x700 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 600 kg; X/Y/Z Axis travel: 1200/700/600 mm; Distance from spindle nose to table surface: 100-700 mm; Main spindle speed: 8000 rpm; Spindle motor power: 11/15 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 24/24/24 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 6800 kg; Machine overall size: 5300x2550x2600 mm;
Technical Parameters Table size (LxW): 1200x600 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 600 kg; X/Y/Z Axis travel: 1100/600/600 mm; Distance from spindle nose to table surface: 120-720 mm; Main spindle speed: 8000 rpm; Spindle motor power: 11/15 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 48/48/48 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 6200 kg; Machine overall size: 4600x2450x2450 mm;
Technical Parameters Table size (LxW): 1000x550 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 500 kg; X/Y/Z Axis travel: 800/550/550 mm; Distance from spindle nose to table surface: 120-670 mm; Main spindle speed: 8000 rpm; Spindle motor power: 11/15 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 12/12/22 Nm; Rapid feed speed (X/Y/Z): 48/48/48 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 5200 kg; Machine overall size: 4000x2400x2400 mm;
Technical Parameters Table size (LxW): 1000x500 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 500 kg; X/Y/Z Axis travel: 800/500/500 mm; Distance from spindle nose to table surface: 150-650 mm; Main spindle speed: 8000 rpm; Spindle motor power: 7.5/11 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 12/12/22 Nm; Rapid feed speed (X/Y/Z): 48/48/48 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 5000 kg; Machine overall size: 4000x2400x2400 mm;
Technical Parameters Table size (LxW): 800x500 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 500 kg; X/Y/Z Axis travel: 650/500/500 mm; Distance from spindle nose to table surface: 120-620 mm; Main spindle speed: 8000 rpm; Spindle motor power: 5.5/7.5 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 8/8/12 Nm; Rapid feed speed (X/Y/Z): 48/48/48 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 4500 kg; Machine overall size: 4000x2400x2400 mm;
Contains- Withanolides(2.5%) Extracted from the whole plant of Ashwagandha(Withania somnifera) Country of Origin INDIA Part Used Whole Plant Extraction Solvent Hydroalcoholic (Ethanol/water) Herb Ratio 5:1 Description Ashwagandha Extract is obtained by Hydroalcoholic Extraction of Withania somnifera followed by Spray Drying. Appearance- Light to brown colored Powder Odour and Taste- Characteristic Loss on Drying- NMT 5% Bulk Density (Untapped)- 0.30- 0.60g/ml Bulk Density (Tapped)- 0.40 â?? 0.80 g/ml Particle Size- 100% Passing through 60 mesh Identification- Comply with standard Packing Details- Packed in Food grade PP Bags sealed into HDPE Containers. Labelling- The label displays the product name, lot number, net weight, gross weight, and other information mark specified by the customer. Shelf Life- 36 Month under specified storage condition Storage Condition- Store in well-closed container, away from moisture and heat
Introducing our premium collection of 100% cotton T-shirts, crafted with comfort and style in mind. Made from high-quality cotton fabric with a weight of 220 grams per square meter (GSM), these T-shirts offer unbeatable softness, breathability, and durability. Whether you're lounging at home, hitting the gym, or heading out for a casual outing, our T-shirts provide the perfect blend of comfort and versatility. The breathable cotton fabric ensures all-day comfort, while the 220 GSM weight offers a luxurious feel and enhanced durability. Available in a variety of vibrant colors and classic designs, our T-shirts are perfect for everyday wear and can easily be dressed up or down to suit any occasion. The timeless appeal of cotton makes these T-shirts a wardrobe staple that never goes out of style. With meticulous attention to detail and superior craftsmanship, our T-shirts are designed to withstand the test of time, wash after wash. Experience the ultimate comfort and style with our 100% cotton 220 GSM T-shirts â?? the perfect addition to your wardrobe essentials. Upgrade your T-shirt game with our premium collection today!