There is a green environmental-friendly project. Thanks to no waste, no toxicity .There is not glue in the raw materials , so our baords are not formaldehyde and benzene . The raw materials is made of mgo/mgcl2/sawdust and inorganic chemical materials .They are widely and purchased easily .
This product can be nailed, planed , sawed and sticked.In the view of that its fireproofing grade is a .So our product will not be combustible when the fire is 800-1000c.At the same time when our product is fell to the water for a week , there are not the following phenomenon such as chalking, deformation and warp.In light of there is not glue in the raw materials.So there is not formaldhyde and benzenz for our boards .
The Magnesium board is made of filling materials ,such as sawdust and all kinds of crushed plant straw (you can select any one kind )and several chemical raw material which are token as modified material after special technology .the board has such features:quickly hardening ,high strength ,large-format ,fireproof ,damp-proof and good waterproof performance.It can be nailed ,planed and stuck,so it can be used widely at indoor decoration ,such as wall skirting and ceiling of market,hotel,club ,station ,office building and living room.
Our all equipment can produce board with same quality and specification but different production.The board with the thickness of 2-25mm, the biggest width of 1, 300mm and unlimited length .So you can adjust the thickness of board at will.
The product manufactured by this equipment has following features:fireproof, waterproof, environmental protection and no toxicity , at the same time it is resistant against acid, alkali and aging .This product can be nailed, planed, sawed and sticked.In view of that its fireproofing grade is a .So our product will not be combustible when the fire is 800-1000c. At the same time, when our product is fell into the water for a week , there are not the following phenomenon such as chalking, deformation and warp.In light of there is not glue in the raw materails, so there is not formaldehyde and benzene for our boards.
The production line is composed of board-making machine , glue spreading-overlaying-drying machine and glazing machine .What's more, there is a green environmental-protection project .Because there is no waste materials, waste water and waste gas during its production processing .It 's also cheap.
1. Raw material Mgo/mgcl2/fiber glass mesh 2. Texture of material steel 3. Automatic degree Fully/semi automatic 4. Finsihed board size Thickness:2-25mm,unlimited length ,width:1300mm 5. Capacity Maximum 1500 sheets/shift(8 hours)
The standard specification of the board is 1.22m*2.44m.our equipment can produce the board with the thickness of 2-25mm ,the biggest width of 1300mm and unlimited length.so you can adjust the thickness at will.
The company regards product quality as the lives of enterprise,the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology,so that the equipment endurable and wear resisting ,wearing parts warranty for one year.
This production line mainly product all kinds of magnesium oxide boards .They can be used for ceiling , wall skirting , decorating of indoor wall and lining board for furniture .It can replace three-ply board , five-ply board , mdf and gypsunm board .It has following features:fireproof , waterproof , environmrntal protection and no toxicity, resistant against acid, alkail and aging.
According to different production,our equipment has 6 models for large-scale and small-scale.our all equipment can produce board with same quality and specification but different production.the board with the thickness of 2-25mm, the biggest width of 1,300mm and unlimited length .so you can adjust the thickness of board at will. the standard specification of the board is 1.22m*2.44m.
The production line for mgo board is composed of board-making machine,glue-spreading and veneering-drying machine and glazing machine.according to the production and the automatic degree, this production line is divided into 6 models and three specifications ,such as large ,middle and small specification.The production line for mgo board has :production workshop ,finished product workshop and raw material warehouse .
About this production line ,among which ,Glue spreading-overlaying-daying Machine and Glazing Machine are equipment which will give the advanced processing to the boarad .the above two machine s can overlay and glaze the magnesium oxide board or orinary wood board . The Glue spreading-overlaying-daying Machine can overlay wood-grain paper,PVC film .The Glazing Machine will glaze the overlaied board with wood-grain paper,and make the board with bright light or dull light .
The board with the thickness of 2-25mm, the biggest width of 1, 300mm and unlimited length .So you can adjust the thickness of board at will. The standard specification of the board is 1.22m*2.44m.It can be nailed , planed and stuck, so it can be used widely at indoor decoration , such as wall skirting and ceiling of market, hotel, club , station , office building and living room and it also can get large usage at top-grade furniture, door and partition .
This production line is equipped with shaking device which can remove inside and outside air bubble .so our board is more compact .in addition,we use the no-woven cloth as the separating film to increase the toughness and the strength of the board .The machine can be adjusted arbitrarily ,and then produce the board with the thickness of 2-25mm,the biggest width of 1,300mm and unlimited length .so you can adjust the thickness of board at will.
The board produced by the board-making machine can be made into various decorating art mural painting about landscape, flower-and-bird,insect-and-fish as well as character.the product gets popularity from customers with excellent quality and reasonable price
Usgae and Technology Index of Product The Magnesium board is made of filling materials ,such as sawdust and all kinds of crushed plant straw (you can select any one kind )and several chemical raw material which are token as modified material after special technology .the board has such features:quickly hardening ,high strength ,large-format ,fireproof ,damp-proof and good waterproof performance.It can be nailed ,planed and stuck,so it can be used widely at indoor decoration ,such as wall skirting and ceiling of market,hotel,club ,station ,office building and living room and it also can get large usage at top-grade furniture,door and partition .this product is made from wasteb materials,and it is ideal product which can replace all kinds of wood board with reasonable price and good quality. Equipment parameters:Description Raw material :Mgo/mgcl2/fiber glass mesh Texture of material :steel Automatic degree :Fully/semi automatic Finsihed board size :Thickness:2-25mm,unlimited length ,width:1300mm Color :Blue ,red,etc Capacity :Maximum 2000 sheets/shift(8 hours)
The strengthened mould plate with this technology can replace steel mould board ,bamboo&wood mould board and multiayer board .Being a high-profit product ,this board is applied widely in all kinds of concrete engineering with low-cost,high strength,long life and convenient to use .the board is high-profit product
Material: Alloy 6063, 6061, 5052, 6082, 7075, etc.(temper: t4, t5, t6, etc.) Process: Mold manufacture, extrusion, sample testing, customer confirmed, mold modification, large cargo extrusion, product inspection, surface treatment, packaging Application: Rivets, screws, nuts, hangers, arts and crafts, etc Advantages: Good toughness, not easy fracture, bright color and not easy to fall off, ect
Aluminum bars, tubes, pipes, profiles Material: Alloy 6063, 6061, 5052, 6082, 7075, etc.(temper: t3, t4, t5, t6, etc.) Process: Mold manufacture, extrusion, sample testing, customer confirmed, mold modification, large cargo extrusion, product inspection, surface treatment, packaging Surface treatment: Anodizing, electrophoresis, powder coating, pvdf coating, etc. Application: Aerospace, construction, packaging, electrical, electronics, machinery, furniture, etc Points: Mould management, machine repair, workshop clean, product inspection, customer communication, workers training, etc
