Specification:93%min. ,95%min. Appearance: powder form, needle form Molecular Formula: CH3(CH2)nOSO3Na, n=11,13
Drying Process - Air Drying(Dehydrated) or Freeze Drying(Lyophilization) Material - Fresh Lychee Grade -A Moisture - 5% Nutrients of Lychee: Fresh whole lychee contains a total 72 mg of vitamin C per 100 grams of fruit, an amount representing 86% of the Daily Value (DV) (table, right). On average, nine peeled lychee fruits could meet an adult's daily vitamin C requirement but otherwise would supply little nutrient content. Lychees are low in saturated fat and sodium. And lychee contains oligonol, a short-chain polyphenol under preliminary evaluation for its potential biological properties.
- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper
- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper
PRODUCT PROFILE Particle Size 98% to pass through a 200 mesh sieve Extraneous Matter %
PRODUCT PROFILE Particle Size 98% to pass through a 200 mesh sieve Extraneous Matter %
Fertilizers Like Urea, Onium Sulphate Ammonium Chloride Anhydrous Ammonia ,Sodium Nitrate Calcium Nitrate, Potassium Nitrate.
1. colors: filemot; 2. high energy, high content of protein; 3. rich in vitamins and potassium, sodium, magnesium, iron, copper, manganese, zinc and other trace elements; 4. strong attractant to animals: thick aroma, induce animals to eat; 5. high security: fresh raw materials, without corruption and modification, and several times of high temperature processing, which can kill harmful bacteria effectively; 6. high-absorbing rate: after entrance to the industry, the raw materials are sorting out of the skin, fur, hoof, horns, blood and other debris; 7. reducing the cost: low rice, good source of high-quality protein, and can replace part of fishmeal and soybean meal, can reduce feed costs, and can effectively improve the quality of the product. scope of application: fox, mink, badger-like animal, livestock, poultry, fish, pets and other animals.
1. colors: filemot; 2. high energy, high content of protein; 3. rich in vitamins and potassium, sodium, magnesium, iron, copper, manganese, zinc and other trace elements; 4. strong attractant to animals: thick aroma, induce animals to eat; 5. high security: fresh raw materials, without corruption and modification, and several times of high temperature processing, which can kill harmful bacteria effectively; 6. high-absorbing rate: after entrance to the industry, the raw materials are sorting out of the skin, fur, hoof, horns, blood and other debris; 7. reducing the cost: low rice, good source of high-quality protein, and can replace part of fishmeal and soybean meal, can reduce feed costs, and can effectively improve the quality of the product. scope of application: fox, mink, badger-like animal, livestock, poultry, fish, pets and other animals.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
We have Magnesium Bicarbonate Liquid form in drums
Dihydroxy Trade name:popdh Chemical name:dihydroxy Molecular formula:c6h10o3 Cas:13580-38-6 Assay:50% Appearance:yellowish transparent liquid Related density@20c:1.06-1.11 Refractive index@20c:1.3900-1.4100 Ph value:1.0-2.0 Application:used with derivative of alkyne-alcohol, synergistic brightness to enhance leveling and filling up ability at low densities.
1.Properties Product name: Caustic Soda Flake CAS No.: 1310-73-2 Molecular Weight: 40.00 Molecular Formula: NaOH Appearance: White flakes 2. Applications Digestion of wood and bagasse for manufacture of pulp and paper. Digestion of wood for manufacture of viscose staple fibre, viscose filament yarn and rayon tyre cord. Manufacture of soaps and detergents. Digestion of aluminium ore to make alumina as an intermediate in the production of aluminium. Dleaching & processing of cotton textiles. Regeneration of ion-exchangere sins in water treatment plants. 3.Specifications: Composing Flake 96% Flake 98% Flake 99% NaOH 96% Min. 98% Min. 99% Min. Na2CO3 1% Max. 0.5% Max. 0.4% Max. NaCl 2% Max. 0.03% Max. 0.015% Max. Fe2O3 0.01% Max. 0.005% Max. 0.001% Max 4. Quality control Rigid quality control on inputs, process and outputs lead to high purity and consistent quality that permit standardization of its use in industry. 5. Handling and Storage Caustic Soda is a highly corrosive substance and requires careful handling. There should be no contact with bare skin. Caustic Soda flakes should be stored under dry conditions away from acids, organic chemicals, metals such as aluminium, tin, zinc, lead etc. and their alloys.
1.Properties Product name: Caustic Soda Flake CAS No.: 1310-73-2 Molecular Weight: 40.00 Molecular Formula: NaOH Appearance: White flakes 2. Applications Digestion of wood and bagasse for manufacture of pulp and paper. Digestion of wood for manufacture of viscose staple fibre, viscose filament yarn and rayon tyre cord. Manufacture of soaps and detergents. Digestion of aluminium ore to make alumina as an intermediate in the production of aluminium. Dleaching & processing of cotton textiles. Regeneration of ion-exchangere sins in water treatment plants. 3.Specifications: Composing Flake 96% Flake 98% Flake 99% NaOH 96% Min. 98% Min. 99% Min. Na2CO3 1% Max. 0.5% Max. 0.4% Max. NaCl 2% Max. 0.03% Max. 0.015% Max. Fe2O3 0.01% Max. 0.005% Max. 0.001% Max 4. Quality control Rigid quality control on inputs, process and outputs lead to high purity and consistent quality that permit standardization of its use in industry. 5. Handling and Storage Caustic Soda is a highly corrosive substance and requires careful handling. There should be no contact with bare skin. Caustic Soda flakes should be stored under dry conditions away from acids, organic chemicals, metals such as aluminium, tin, zinc, lead etc. and their alloys.
evian has naturally occuring elecrolytes contributing to the taste nature intended. Mineral Composition (mg/l) Calcium Ca++80 / Magnesium Mg++26 / Sodium Na+6,5 / Potassium K+1 / Silica Si02 15 Bicarbonates HC03-360 / Sulfates S04--14 / Chlorides CI-10 / Nitrates N03-3,8 Dissolved solids at 180�°C: 345mg/l Neutrally balanced pH = 7,2 evian�® is all natural and perfectly pure. Each drop of Evian starts as rain and melting snow on the peaks of the Northern Alps. It filters through layers of glacial sand during a 15+ year journey deep in the heart of the mountains. Through this process, Evian is filtered naturally, without chemicals, giving it the purity, mineral content, and taste that nature intended. EVIAN mineral water This mineral water is with French label EVIAN - 24 x 33 cl pet bottles EVIAN - 24 x 50 cl pet bottles EVIAN - 12 x 75 cl (sport cap) pet bottles EVIAN - 12 x 100 cl pet bottles EVIAN - 12 x 150 cl pet bottles
Dolomite mineral is a double carbonate of calcium and magnesium and it exhibits a granular structure. It has high natural whiteness and it's noted for their ease of dispersion. Its use improves properties such as weather ability, reduces shrinkage, fissure development and water absorption. Natural Dolomite Powder is of White Colour and is used as Filler in many applications such as Soap & Detergent, Paints, Ceramics and many other Industries. Applications: - Soap & Detergent Leather Cloth Industry Cable Industries Rigid PVC Pipes Iron, Steel, and Ferro-Alloys Industries Paints, Inks, Powder Coating Ceramic Industry Rubber Industry Glass Industry Available Mesh Size: - 100 TO 700 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 92 TO 96 AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 10.41 % 2. Alumina - (AI2O3) 01.15 % 3. Iron - (Fe2O3) 00.21 % 4. Titanium - (TiO2) 00.18 % 5. Calcium - (Cao) 30.02 % 6. Magnesium - (MgO) 18.41 % 7. Soda - (Na2O) 00.34 % 8. Potash - (K2O) 00.07 % 9. Loss on Ignition - (LOI) 38.91 %
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20
Ball clay, or plastic clay as it is also known, is an extremely rare mineral, only found at a handful of locations around the world. It is a kaolinitic clay that commonly consists of 20 - 80% kaolinite, 10 - 25% mica, 6 - 65% quartz as well as organic matter. Ball clay is formed from the weathering and transportation by water of parent rocks which are deposited in ancient river basins from where it is extracted. Applications: - Ball clays are prized for the production of traditional ceramics such as sanitaryware, tableware, wall and floor tiles as well as for technical ceramics and electrical porcelains. Ball Clay products are immensely used in the manufacturing of Ceramics, Sanitaryware, Vitrified Tiles, Glazes and Engobes ultramarine and in various other purposes. As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 96+ AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 50 - 65 % 2. Alumina - (AI2O3) 20 - 35 % 3. Iron - (Fe2O3) 0.33 - 2 % 4. Titanium - (TiO2) 0.31 - 3 % 5. Potash - (K2O) 0.19 - 2 % 6. L Value 60 - 88 %
China Clay is a naturally hydrated Aluminum Silicate. It is one of the most abundantly available clay in the Earth's crust. Pure grade of China clay or kaolin clay produced by the processes of levigating. China Clay is also called KAOLIN, it is one of the essential Raw materials for Ceramic Industries, China Clay does not swell on adding water & Alumina present in Clay do not form Isomorphism series with any other metallic compound. Applications: - China clay products are immensely used in the manufacturing of ceramics, papers, paint colors, vitrified tiles, soap, ultramarine and in various other purposes Available Mesh Size : As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders.
