About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
High-performance Melt Blown Fabric for Protective masks, Medical masks and Surgical masks compliance with EN14683 product standard. Grade BFE95+, BFE99+
Printed Nonwoven for Face Mask and other applications.
Nonwoven fabric for Disposable Face Mask, Caps, Gowns ,Hygiene Products ,Bags , agricultural needs and food packing.
PEF 95 -99 for surgical Mask. Certificates Available.
Item:Polypropylene (pp) spunbond nonwoven eco-friendly fabric Raw material/component:100% polypropylene (pp) long filament fiber Nonwoven technic:Spunbonded Grade:A grade Standard width:1.6m, 1.8m, 2.2m, 2.4m, 3.2m , could be connected to any wider width even reach 30m, Minimum width:Could be cut into small width, eg.1.5cm, made-to-order Basic weight:9gsm-250gsm   Dotted design:Big/small square dots, sesamoid dot, cross dot, line dot and big/small round dot Moq:Instock goods: 1 roll; custom-made specific: 1000 kgs Package:packed in rolls,  with 2 " or 3 " core inside, strong poly bags outside Colors:Various colors available in stock all year round, see the color swatch, any colour can be made-to-order Delivery time:Stock fabric:2 day; made-to-order: 10-15 days Loading port:Guangzhou, foshan port Payment:T/t, l/c, d/p, western union, money gram, etc. Capacity:almost 1800 tons/month Feature:High tensile strength, breathable, biodegradable, recyclable, eco-friendly, nontoxic; Special treatment: lamination, coating, printing, anti-static, fire(flame) retardant, anti-ultraviolet, hydrophilic, softer, water-proof(hydrophobic) Applications:Advertising/shopping bag, disposable clothes, medical products, filtering/packing material, interlining of shoes, canberra material, agricultural/horticultural/gardening cover, weed control mat, bedding and furniture inner material, etc. Certificate:Sgs
Meltblown Nonwoven
100% polypropylene nonwoven melt blown fabric 25gsm, 175/260mm width packed in1000 meters roll SITRA certified BFE AND PFE 99%
Non-woven material obtained by spinning polypropylene microfibers (1-5 microns thick), accompanied by the supply of hot air at high speed. Unlike spunbond, the fibers are whipped and laid directly on the conveyor, without stretching. Meltblown has significant advantages over trradional no ovens. These include greatly increased uniformity, both visual and physical, beter coverage per surface unit, increased or complete water permeability with simultaneous breathability, as well as high filtraaon properes. Meltblown is chaacterized by a significant effect of filtraltraon, absorpon and isolaon. Meltblown is successfully used in filters for respirators, industrial masks, vacuum cleaners, filters for filtering liquids and gases, the prproducon of meal clothing and hygiene products. density: 25 g / m2 BFE>98% BFE>95%
SMMS multilayer nonwovens (layers: spunbond-meltblown-meltblown-spanbond) are made from endless polypropylene yarns that are thermally bonded. - SMMS materials serve as a barrier layer that prevents the penetration of bacteria. - Softer than non-woven spunbond - Excellent moisture retention, but at the same time they have good breathability. - Resistant to tearing and stretching, perfectly retain their shape - Resistant to the spread of microorganisms. SMMS materials are intended for use in the medical industry for the manufacture of operating disposable clothing and underwear. SMMS width: 1.6 m density: 20, 25, 35, 50 g / m2. Also available custum width and color .
Non-woven material obtained from the polymer melt by die-casng using thermal bonding. It is a very light, lint-free, environmentally friendly material. Spanbond perfectly replaces expensive materials, not inferior to them in the thinness of the canvas (while maintaining strength) and breathability. A disnct e feature of the spunbond is its low cost and prpracality compared to tradional m terials. Spanbond, depending on the density, has the widest range of consumpon: fom the use in the manufacture of medical and sanitary products to use as filter materials. width: 1.4-1.6 m density: 25, 35, 40, 50, 60 gr/m2 62/5000 Spanbond width: 1.4-1.6 m
Product Description Needlepunch Nonwoven 100% PSF PP options Price of product ( USD price or FOB price) : 150-200/kg Product origin : Himachal Pradesh, India Key Specifications/Special Features : "Width: 1m - 3.2m GSM: 80 - 600 GSM Color: any" MOQ 2000 ton
Meltblown Bfe 99
SSS coated PE Color: White or Blue Weight: 40-45gsm Width: 160cm Length: 800-1000m per roll Packing: PE film Bureau Veritas lab test report (AAMI - level 3)
Material: 100% PP Flow:95.00 L/Min Resistance: 119 Pa PFE: >= 95%(>0.3um) BFE: >= 99%(>2.5um)
BFE99 25gsm Width: 175mm
1) 100% PP polypropylene raw materials,for a variety of masks filter material 2) GSM: 25-50 grams; 3) width: based on request; 4) with good softness, non-toxic, antibacterial, fog/virus filtering 5) can double composite hot rolling was used to clean cloth/spun-bonded fabric with ultrasonic composite q, hydrophilic after MATS and other health care products used in surgery.
Our Nonwoven fabrics are widely used in Sofa, Bed Sheets, Airline & Train Headrests, Pillow Covers and many more. They combine strength and softness, hygiene and handiness. Advantages: Excellent absorption Softness Smoothness Stretchability Comfort and fit Strength
Nonwoven Agriculture Products
We supply Nonwoven fabric SMS & SMMS, White colour or blue, Width: 0.175m, BFE
