We sell and export good quality Aluminum scrap materials
We sell and export good quality metal Scrap materials
We sale and export good quality copper scrap material
Typical Analysis Range Element (%) Zn 45% - 60% Fe 0.01% - 1.0% Cu 0.01% - 0.09% S 20.0% - 22.0% Pb 0.01% - 0.5% Cd 0.01% As
This system contains below parts and its description is as below: Battery watering plug (BWP): This plug is made from polyprolene material. It will allow water inside only when the electrolyte level is below plastic float inside. Please note that this BWP will not work on gravity water pressure. It requires Minimum 10 psi water pressure for normal operation. Each BWP has one adaptor for easy fitting in 30 MM TYPE THREAD CELL VENT PLUG. ( there is one more adaptor for lift battery cell 35 mm push in type ) Water feeding pump: It is a 12 v dc windshield washer Pump required to pump and supply water to BWP with pressure. There are two wires coming from battery (on which this system is installed) through Push to on switch. When the switch is pressed then Pump will get on and supply water to BWP (at a time to six nos. plugs.) Please refer images. DM water tank: It is a 5 liters tank used to store dm water. The water feed Pump is mounted on this tank only. Blue Color PU Tubing. : We are providing tubing in continuous shape. And user needs to cut the tube as req. and installed in between two plugs. There is blue color PVC dead cap to use in extreme last plug. Please see photo for ref. Small Plastic Connector: This connector connects 4 mm PU pipe from Pump with 6 m PU pipe to BWP. Please refer images. Push to ON switch and wires: The push to ON switch and wires provides 12 v dc supplies to water feed pump. Please refer image. Other Instructions: The BWP is a low weight delicate, accurate, sensitive plastic moulded and assembled product. So handle it gently, do not apply very high manual pressure to fix in battery cell. Otherwise the top cover will get damage. Keep minimum distance in between DM water tank and Lead acid Battery. When you want to TOP up DM water then simply press and hold Push to ON switch. Now Pump will feed water to each BWP and the flow will become Zero when all Battery cells electrolyte level reaches to BWP float point. When you press switch again then as the electrolyte level is there so every BWP will not allow water into battery cell. Package Contents: Water Storage Tank Pipeline /Water tubes Feed water Pump End Plugs Battery watering Plug
This system contains below parts and its description is as below: Battery watering plug (BWP): This plug is made from polyprolene material. It will allow water inside only when the electrolyte level is below plastic float inside. Please note that this BWP will not work on gravity water pressure. It requires Minimum 10 psi water pressure for normal operation. Each BWP has one adaptor for easy fitting in 30 MM TYPE THREAD CELL VENT PLUG. ( there is one more adaptor for lift battery cell 35 mm push in type ) Water feeding pump: It is a 12 v dc windshield washer Pump required to pump and supply water to BWP with pressure. There are two wires coming from battery (on which this system is installed) through Push to on switch. When the switch is pressed then Pump will get on and supply water to BWP (at a time to six nos. plugs.) Please refer images. DM water Tank: It is a 5 liters tank used to store dm water. The water feed Pump is mounted on this tank only. Blue color PU Tubing. : We are providing tubing in continuous shape. And user needs to cut the tube as req. and installed in between two plugs. There is blue color PVC dead cap to use in extreme last plug. Please see photo for ref. Small Plastic Connector: This connector connects 4 mm PU pipe from Pump with 6 m PU pipe to BWP. Please refer images. Push to ON switch and wires: The push to ON switch and wires provides 12 v dc supplies to water feed pump. Please refer image. Other Instructions: The BWP is a low weight delicate, accurate, sensitive plastic moulded and assembled product. So handle it gently, do not apply very high manual pressure to fix in battery cell. Otherwise the top cover will get damage. Keep minimum distance in between DM water tank and Lead acid Battery. When you want to TOP up DM water then simply press and hold Push to ON switch. Now Pump will feed water to each BWP and the flow will become Zero when all Battery cells electrolyte level reaches to BWP float point. When you press switch again then as the electrolyte level is there so every BWP will not allow water into battery cell. Package Contents: Water Storage Tank Pipeline /Water tubes Feed water Pump End Plugs Battery watering Plug Auto Feed Water Control Unit
Quality Product : Lowest Price : Benefit to the end user : Battery watering plug (BWP): This plug is made from polyprolene material. It will allow water inside only when the electrolyte level is below plastic float inside. Please note that this BWP will not work on gravity water pressure. It requires Minimum 10 psi water pressure for normal operation. Each BWP has one adaptor for easy fitting in 30 MM TYPE THREAD CELL VENT PLUG. ( there is one more adaptor for lift battery cell 35 mm push in type ). Water feeding pump: It is a 12 v dc windshield washer Pump required to pump and supply water to BWP with pressure. There are two wires coming from battery (on which this system is installed) through Push to on switch. When the switch is pressed then Pump will get on and supply water to BWP (at a time to six nos. plugs.) Please refer images. DM water tank: It is a 5 liters tank used to store dm water. The water feed Pump is mounted on this tank only. Blue color PU tubing : We are providing tubing in continuous shape. And user needs to cut the tube as req. and installed in between two plugs. There is blue color PVC dead cap to use in extreme last plug. Please see photo for ref. Small Plastic connector: This connector connects 4 mm PU pipe from Pump with 6 m PU pipe to BWP. Please refer images. Push to ON switch and wires: The push to ON switch and wires provides 12 v dc supplies to water feed pump. Please refer image. Other Instructions: The BWP is a low weight delicate, accurate, sensitive plastic moulded and assembled product. So handle it gently, do not apply very high manual pressure to fix in battery cell. Otherwise the top cover will get damage. Keep minimum distance in between DM water tank and Lead acid Battery. When you want to TOP up DM water then simply press and hold Push to ON switch. Now Pump will feed water to each BWP and the flow will become Zero when all Battery cells electrolyte level reaches to BWP float point. When you press switch again then as the electrolyte level is there so every BWP will not allow water into battery cell. Package Contents: Water Storage Tank Pipeline /Water tubes Feed water Pump End Plugs Battery watering Plug Auto Feed Water Control Unit
We are the leading supplier/exporter of animal feeds & grains at wholesale prices in Europe.
We are the leading supplier/exporter of animal feeds & grains at wholesale prices in Europe.
We are the leading supplier of ladies designer sarees
Modern designed, painted different colors, different sizes, horizontal or vertical, produced from steel and aluminum, hybrid, electic resistance adjustible, high heating efficent heating radiators. We are producing different models and sizes desing radiators and towel rails with ISO 9001, EN442 and CE certificates.
VND Phenolic foam is a light weight, easy to handle, ideal for varieties of uses in insulation across a range of applications. Phenolic foam is a rigid Cellular foam product with a closed fine cell structure, whose polymer structure is made of poly condensation of phenol and aldehydes. Floral foam for flower decoration, Foot impression Foam for making of customized footwear Freezer pack foam for medical transportation and Rigid polyurethane foams for Medical, Industrial and other specific applications.
flat drippers of various shapes and sizes, which can be customized according to clients needs. The dripper has a new type of wide and long flow channel, with full turbulence, self-flushing, and good anti-clogging performance; The manufacturing deviation of the dripper is small, and the water output is uniform .
The pressure compensating dripper has a labyrinth runner, a scientific structure, stable quality of the silicone sheet, and good pressure compensating effect; The pressure compensating dripper comes with an extra-long filtered water inlet, which has good anti-clogging performance and long service life; Anti-siphon mechanism prevents sediment and other debris from being sucked back into the dripper when the system is shut down, and can be used for underground irrigation; The pressure compensating dripper has small manufacturing deviation, uniform water output, and long laying length.
External Size: 5800*2460*2510mm Internal Size: 5640*2320*2380mm Folded state: 5800*2460*320mm Weight: 850-900kg thickness: 1.5mm or 2mm
Each casting machine can accommodate up to 6 moulds , upon customer request. The machine consists of a metal structure that supports a mobile platform on which the lower half-mould is anchored, and an upper platform on which the upper half-mould is anchored and which has the function of keeping the mould closed. The mould is kept closed between the two frames by means of pneumatic pistons, formed by a pneumatic gripping system, during the casting phase. The center of rotation is fixed The frames have the characteristic of being able to rotate in any position (flat, vertical or inclined depending on the operation to be performed). They are also equipped with micrometric adjustments to accommodate molds of all sizes. All sanitary ware composed of two or three parts (if the third part can be removed manually) such as: hanging pots and bidets ( made with moulds in three parts), washbasins of all kinds, washbasins and other special pieces The demolding of the pieces takes place through a special trolley on wheels supplied with the machine itself that is mechanically lifted The machine is suitable for small productions and productions that require frequent mold changes. The demolding of the pieces takes place above trolleys that can also have the function of piece storage.
Solar panel 350W Panel size: 1956*992*35mm Cell: Polycrystalline PERC 157*157mm Packing: 31pcs/pallet 868pcs/40'HQ Voc(V) 47.0V Isc(A) 9.95A Vm(V) 38.3V Im(A) 9.14A Weight: 21.3kg
Solar panel 400W Panel size: 1722*1134*35mm Packing: 31pcs/pallet 806pcs/40'HQ Weight: 22.0kg Voc(V) 37.0V Isc(A) 13.60A Vm(V) 31.0V Im(A) 12.91A Efficiency 20.5%
Solar panel 450W Panel size: 1909*1134*35mm Cell: Monocrystalline PERC 182*182mm Packing: 31pcs/pallet, 744pcs/40'HQ Voc(V) 41.3 Isc(A) 13.89 Vm(V) 34.7 Im(A) 12.98 Efficiency 20.8%
Solar panel 500W Panel size 2094*1134*35mm Packing: 31pcs/pallet 682pcs/40'HQ Voc( V) 45.7V Isc(A) 13.92A Vm(V) 38.3V Im(A) 13.05A Efficiency 21.1% Weight: 25.1kg Cell: Monocrystalline PERC 182*182mm