Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Hurricane Window Screens Hurricane Window Screens also called impact storms screen. Hurricane window screens prevent vandalism, broken glass, energy savings, and storm protection. Hurricane window screens are very similar to insect screens, only stronger. They are manufactured with heavy-duty extruded aluminum frames and the screens are stainless steel wire mesh, powder coated black. From the outside, the screens resemble solar screens. From the inside of the house, the screen material is only slightly thicker than standard insect screens. They are also equipped with various locking mechanisms (which allow the screen to be opened) to meet emergency egress requirements. The hurricane window screens are very similar to common insect screens, but only much stronger and sturdier. They are manufactured with sstainless steel hurricane screens which is powder coat painted black. If you live in an area thatâ??s regularly at risk for Hurricane Damages, So hurricane screens will be your best choice. Security Purpose Stainless Steel Hurricane Proof Burglar Screen Using special enhanced security stainless steel insect screens with excellent durability and strong resistance to external impacts, it prevents people from falling and from external intrusion. Unlike traditional aluminum insect screens, it is corrosion-resistant, semi-permanent, and has a sturdy structure that is not easily damaged, providing you with a pleasant indoor atmosphere through adequate ventilation even in the hot summer months.
Hurricane Window Screens Hurricane Window Screens also called impact storms screen. Hurricane window screens prevent vandalism, broken glass, energy savings, and storm protection. Hurricane window screens are very similar to insect screens, only stronger. They are manufactured with heavy-duty extruded aluminum frames and the screens are stainless steel wire mesh, powder coated black. From the outside, the screens resemble solar screens. From the inside of the house, the screen material is only slightly thicker than standard insect screens. They are also equipped with various locking mechanisms (which allow the screen to be opened) to meet emergency egress requirements. The hurricane window screens are very similar to common insect screens, but only much stronger and sturdier. They are manufactured with sstainless steel hurricane screens which is powder coat painted black. If you live in an area thatâ??s regularly at risk for Hurricane Damages, So hurricane screens will be your best choice. Security Purpose Stainless Steel Hurricane Proof Burglar Screen Using special enhanced security stainless steel insect screens with excellent durability and strong resistance to external impacts, it prevents people from falling and from external intrusion. Unlike traditional aluminum insect screens, it is corrosion-resistant, semi-permanent, and has a sturdy structure that is not easily damaged, providing you with a pleasant indoor atmosphere through adequate ventilation even in the hot summer months.
Features for the Scag STCII-61V-26CV-EFI Kohler 26 HP Engine: Big Power, air cooled, EFI (electronic fuel injection. Velocity Plus Cutter Decks: The envy of the industry, Velocity Plusâ?¢ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scagâ??s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing. Ogura PTO Clutch Brake: The Ogura GT3.5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 250 ft. lb. of holding strength, and an adjustable air gap for long life. Tiger Eye Advanced Monitoring System: Depending on the mower model and engine selection, the Tiger Eyeâ?¢ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operatorâ??s seat. Comfort Suspension Seat: Torsion-spring suspension seat adjusts to each operatorâ??s weight to provide superior comfort. Seat features full padding, forward/rearward adjustment, a high back, adjustable armrests and an adjustable back angle. The 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour. GENERAL Total Fuel Capacity 9.5 gallons Drive Tires 24" x 12"-12" (61") Caster Tires 13" x 6.5"-6", flat-free Seat 4-point iso-mounted mid-back mounted on operator-suspension platform DRIVE SYSTEM Drive System Type Dual Pump and Motor Pumps Hydro-Gear 12 cc Motors Parker 14.5 ci Forward Ground Speed 12 mph Reverse Ground Speed 5 mph Parking Brake Foot-operated pedal DECK Cutting Widths 61" Type Velocity Plus&trade Cutting Height 1" to 5" in .25" increments Deck Lift Adjustable foot-operated pedal Construction Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles. Spindles Cast-iron housing with tapered roller bearings. Blade Engagement Ogura GT3.5 (250 ft lb)
G9-power â?? E 6010,E 6012,E 6013 WELDING ELECTRODES E6013 electrode flux coating contains ferromanganese, cellulose, rutile, potassium silicate as a binder, and other siliceous materials. The potassium compounds allow it to operate with AC at low amperages and low open-circuit voltages E6013 rutile electrode for Mild steel. It welds on AC or DC with excellent performance and easy restrike feature 1. All-position electrode for the welding of mild steel. 2. Excellent choice for sheet metal lap and fillet welds. 3. Easy slag removal. 4. Manufactured under a quality system certified to ISO 9001 requirements 5. General purpose electrodes for welding mild steel. 6. Easy-striking, holds a stable arc with self-releasing slag for excellent shape and finish of the weld seam. Operates with AC or DC Power Sources Suitable for Arc Welders Generally Require Current in Excess of 115A Consult your Manual for Welding Safety Precautions 1. High Tensile Strength 2. Crack Proof Joints 3. High Penetration 4. Shiny and Excellent Surface Finish 5. Easy Slag Removal Sizes 2.50 mm x 350 mm 3.15 mm x 350 mm 3.15 mm X 450 mm 4.00 mm X 350 mm 4.00 mm x 450 mm 5.00 mm X 450 mm Chemical composition C% Mn% Si% S% P% 0.07 0.45 0.35 0.03 0.03 Approved By CE/BIS/IBR/BHEL/Cethar Vessels/
Product Description Suitable Environment One of La Marzocco most popular machines, the Linea has earned its reputation as a global leader in retail specialty coffee. As the benchmark for independent coffee bars, this machine is capable of producing high-quality espresso consistently, even in the busiest shops. Thanks to its durability, the Linea can be built to accommodate small or large coffee houses and can be operated by baristas of all levels. Operation The La Marzocco Linea is easy to use, and requires limited experience to operate. Basic users can operate the brewing buttons, however, if you choose to customize the liquid volumes for signature drinks, it will require reading the manual and a more advanced knowledge of espresso brewing. Highlights The Linea features 2 stainless steel boilers, for simultaneous brewing and steaming. Brew boiler capacity: 1.8 liters Steam boiler capacity: 3.5 liters The La Marzocco Linea is housed entirely in heavy-duty stainless steel, and the saturated brew groups ensure maximum temperature stability. 5 programmable brewing buttons above each brew group make creating consistent, high quality espresso a relatively simple process. 2 omni-directional stainless steel frothing wands allow you to froth or steam multiple drinks at the same time. A built-in water purifying system softens water to prevent residue buildup. The Linea comes with a hot water nozzle, giving you the option to brew tea or quickly warm an espresso cup. This La Marzocco espresso machine connects directly to a water line so you never have to refill it. The Lineaâ??s brew groups and portafilters are each 57mm in diameter. Each brew group features 5 different settings so users can brew a variety of drinks. Dimensions and weight 20 H x 20 W x 23 D 125 lbs NSF and UL approvals ensure compliance with health and safety regulations.
ZL-3 model steam air heater with upper outlet and lower inlet is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system. It is specially designed for supporting downflow drying room/heating rooms. After convert the outside steam heat to heat inside the insulation box through by the fin tube, it�´s mixing with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 5. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 6ï¼?High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
Teeth Tray Mold A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions or mould for teeth are made in the dentist's office, although dentists may also travel to the patient or subject in exceptional circumstances due to the relative portability of the required equipment. High-quality Injection Mold for Denture Impression Teeth Tray Mold The teeth tray mould we have made is high control precision, no eccentricity, with excellent cooling system, reduced molding cycle. Teeth Tray Mould Basic Information Dental Plastic Mould Specification Description Denture Impression Tray Mold Plastic material PP Specification 70*62*18 mm Cavity No 10 cav Mould size 450*600*381mm Mold steel S136 Molding cycle (S) 45S Mold life 500 K Our Advantages Of Making Teeth Tray Mould A professional team and advanced equipment can improve mould for teeth added value and reliability for our customers. As one of the specialized medical injection molding companies, we have standardized project management process. Production environment and management system in line with international standards and custom tray denture service.
Application: Resin Bond Diamond/CBN Grinding Disc are widely used for high precision, high flatness surface grinding. Resin Bond Diamond/CBN Grinding Disc are wear resistant, uniform density. The surface smoothness can be Raâ?¤0.01um in mirror grinding. The typical artifacts are high-speed steel, valve, flow nipple of oil pump, valve, ceramic pads, touch screen, optical glass, sapphire processing and other precision work pieces grinding. Features: Compared to normal size resin bond grinding wheels, big size Resin bond grinding disc have a higher grinding efficiency, because many grinding wheels can be matched together and work simultaneously. Resin Bond Diamond/CBN Grinding Wheels have a special function of the surface is more smooth, so itâ??s usually used for polishing grinding. Besides, it have the features of heat less, not easy to destroy the workpieces. Mainly used in most workpiecesâ?? coarse, semi precision and precision grinding. Shapes of Diamond/CBN Resin Bond Grinding Disc: One-piece Integrally Formed, Round Shape, Fan Shape, Polycyclic Shape.
TEMPO make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Temperature range 121 C to 125 C Pressure range 15 to 22 PSI Factory set 15 PSI at 121 C Supply 230V, AC Construction : Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded. Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve, steam release valve. Safety high pressure release valve. Foot lifting arrangement is provided in 121C/D/E/F, a basket made of thick stainless steel (S.S.) rod wire mesh. Technical Specification : Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heaterâ??s safety. Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater's safety.
Advantages Class I Division 1,Group A,B,C,D Zone 1, Zone 2 Class II Division 1,Group E,F,G Zone 21, Zone 22 Class III Type 4Xï¼?IP66 Ex d IIC T6 Gb Max.160A Ex tb IIIC T80 Db IP66 Built-in Terminal blocks Stainless steel material explosion proof panel SPN-ed-S series are widely used to withstand high strength mechanical impact and resist high corrosive condition in explosive atmosphere. Installed with built-in flame proof Ex d hazardous location circuit breaker in increased safety Ex e housing and operating handle on the housing cover, this explosion proof panelboards can be used as hazardous location panel and atex db whose hazard class division is class 1 div 2 group A, B, C, D and zone 1 group IIC.
Material: high-quality low carbon steel wire Tensile strength: 350-650 Newtons/mm². Color: PVC coated plastic can be made into various colors according to customer needs. PVC coated chain link fence is an excellent choice for those seeking a blend of durability, aesthetics, and cost-effectiveness. With Sunshine Fencing, you can expect top-quality products and services that ensure your fencing needs are met with professionalism and expertise.For more details, you can visit Sunshine Fencing;s official website or contact customer service for personalized assistance. Application: Protection of machinery and equipment, highway guardrail, sports place fence, road green belt protection net. After the chain link mesh is made into a box-like container, it is filled with loose stones, etc., which can be used to protect and support seawalls, hillsides, roads and bridges, reservoirs and other civil engineering, flood control and flood resistance, especially suitable for the protection of private homes, zoo fences, parks and gardens. Warehouse, marine fishing fence, construction site fence, residential security protection, etc.
GRACES-700 Public Transport Inclined Escalator Grace -700 heavy-duty public transport escalators are suitable for public transport systems such as airports, railway stations, and shopping centers, meeting passenger flow needs and equipment safety tests at different times. Specification Of GRACES-700 Public Transport Escalator Specification GRACES-HD/700 Lifting height range/m 3â?¤Hâ?¤25 Use segment length/m -- Tilt angle/�° 27.3/30 Nominal width/mm 1000 Nominal speed/m/s 0.5/0.65 Applicable environment Indoor/Outdoor The type of work Public transport heavy-duty type Handrail structure Vertical armrests Stainless steel diagonal armrest Drag method VVVF Startup mode Frequency conversion low speed Frequency conversion self-starting Number of horizont 1/1500 Safety factor for moving parts 8 As an elevators company, we will do our best to meet all the needs of customers. If you want to know more types of elevators, please visit our website.
Product Description NGYM-I Rail Waist Grinding Machine Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails. Specification Model NGYM-I Material Stainless Steel Dimensions (L x W x H) (mm) 1120*430 *780mm Engine petrol engine Max output power 4.0kw/3600rpm Grinding wheel spindle speed 3600rpm Grinding wheel diameter �¦ 100-230mm Grinding wheel size 2-124*106*34.5/18 G-A20 P 7B-45m/s Machine weight 57kg
Product Description NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
Product Description NQG5III Rail Cutting Machine NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Specification Model NQG5III Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (70m /s) Cutting time 60kg / m rail, 120S Number of usage 50kg /m rail, use 4 times 60kg /m rail, use 3 times Machine weight 39.5kg
Product Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Product Description NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
