lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top. This machine is suitable for various rails of 43~75kg/m.
The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top. This machine is suitable for various rails of 43~75kg/m.
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use.
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency.
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburettor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
ND-1 portable tamper is a special machine for ballast tamping on railway lines and turnouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballast. The impact force is large and the tamping effect is good. The whole machine is small in size, ight. in. weight, and convenient. to go up and down, which can effectively guarantee driving safety during operation.
YD-22 Hydraulic tamping machine is a new generation product developed by our factory, which is based on the experience of domestic and foreign customers in the use of tamping machines and adopts new materials and technologies. The basic structure and principle still retain the advantages of old tamping machine, that is, double guide column frame and single cylinder lifting mode. At the same time, by increasing the depth of the tamping pick and adding the stroke limit device of guide pillar etc. to make the machine not only work on type and type concrete sleeper lines in China, but also can work on various concrete sleepers and steel sleeper lines abroad. The machine is manufactured with a standard gauge of 1435mm and a single side off-track frame, and its main technical performance is better than the old type. The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation.
NGM-6.0 Internal combustion rail grinding machine, Its suitable for grinding rail welding seam, uneven joint, rail side fat edge, rail surface repair welding of rail 43kg/m-75kg/m. Its grinding quality is good and its easy and simple to handle, and convenient to be up on and down from the rail. Its an indispensable tool for railway engineering heavy repair, maintenance and first aid repair.
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train interval time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric.
ND-1 portable rail tamper is a special machine for ballast tamping on railway lines and turnouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballast. The impact force is large and the tamping effect is good. The whole machine is small in size, light. in. weight, and convenient. to go up and down, which can effectively guarantee driving safety during operation.
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Place of Origin Hubei, China Type Rail Tamping Machine Material steel Dimensions (L x W x H) (mm) 840 x 470 x 350mm Brand Name Linkage Product name Portable Rail Tamping Machine Application track maintenance work Engine Two- stroke petrol engine : 1.6kW Rated RPM 4400 r.p.m Impact energy 30~40 J Impact frequency 22 Hz Fuel tank volume 0.95 L Dimensions 840x470x350 mm Weight 25kg Stype petrol
Third Rail Gauge for METRO measurement Contact rail gauge, also called third rail gauge, is a special measuring instrument for measuring the guide height of contact rail (the vertical distance between the horizontal surface of contact gauge track) and the pull out value (the horizontal distance between the inner surface of contact gauge track) in rail transit.
L-shaped track ruler is a special measuring tool used for measuring the distance between the inner side of railway track and the base mark and the height between the plane on the rail and the base mark. 1. Accurate measurement:keep long-term stability. 2. Easy operate 3. Insulated design
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down.
Rail Opening Gauge JG-KC01 Rail opening gauge is mainly used for measuring turnout opening and offset gauge. It can be used for electrical maintenance, overhaul, engineering survey and other related department line operation.The instrument has fast measuring speed and easy to use. It can be used in day or night.
Analogue Track Gauge Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation. It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and operate.Light weight structure is convenient to carry. Features Analogue track gauge has the advantages of affordable price,simple operate and easy calibrate.
Used for measuring the track gauge, check rail gauge, back to back distance, Cant(super-elevation) and flangeway clearance.
