Model L136T Engine type 4 cycle, In line, direct- injection, water cooled, with turbo charger Rating output (B.H.P) PS(kW)/rpm 200(147)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 37 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90A (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,351 x 893 x 937 with M. gear mm 1,351 x 893 x 937 Engine dry weight without M/G kg 748 with M. gear kg 938
Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
Transformer aluminum foil is a key component of insulation and conductivity in the transformer, which directly affects the quality of the transformer. Transformer aluminum foil and strips generally use 1060 aluminum foil, 1070 aluminum foil and 3003 aluminum foil, which belong to the conventional series in the aluminum strip family. 1 series and 3 series aluminum plates are ordinary aluminum plates and have a price advantage over 5 series and 6 series products. The thickness of aluminum foil for transformers is generally between 0.02-0.055mm. Transformer foil is manufactured using a specialized rolling process to achieve the required thickness and mechanical properties. Foils can undergo additional treatments, such as annealing, to improve their ductility and conductivity. Transformer aluminum foil specifications: Alloy: 1050,1060,1070,3003 Temper: O Thickness: 0.014-0.2mm Width: 100-1700mm Length: 100-16000mm Description: Smooth surface, no scratches. The edges can be chamfered (rounded corners, rounded edges), without burrs, and the resistivity is less than or equal to 0.028. Packaging: wooden pallet/fumigation-free wooden pallet, inner diameter 300mm or 500mm. Packed in moisture-proof paper with a paper sleeve in the middle Application: Winding conductors, insulation and shielding Transformer aluminum foil characteristics: 1. It has excellent electrical properties, more efficient transmission and lower loss. 2. Aluminum foil can effectively dissipate heat, keeping the transformer from overheating and working stably under high load conditions. 3. High insulation strength improves the reliability of the transformer. 4. Light and easy to transmit, making transportation and installation more convenient and reducing costs. 5. Environmental protection and energy saving, helping to achieve green power transmission.
Professional Tube Metal Fiber Laser Cutting Machine Fiber laser cutting machine is one metal laser cutting machine. It can help us cut many different metals, such as stainless steel, carbon steel, copper, aluminum,brass, gold, silver, iron, titanium, alloys, etc. Tube laser cutting machine adopts with FSCUT3000S system, which is designed for tube cutting control, support standard tube(rectangle, circle, oval, ellipse and obround etc.) , free form , and steel channels(T/U/H/L shape) production of high precision and efficiency. Product configuration: 1. It can process square pipe, round pipe, rectangular pipe, oval pipe, channel steel, I-shaped steel, hexagon steel, etc. 2. Servo support design, more stable cutting. 3. One-key self-centering, fast clamping, rapid cutting. 4. The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient. 5. The rear chuck brakes quickly to ensure pipe cutting accuracy. Our advantage of fiber laser cutting machine: -- High precision, fast speed, smooth cutting edge, no burrs. --The laser head will not touch the surface of the material and will not scratch the workpiece. --It has the narrowest cutting seam, the smallest heat affected zone, the least local deformation of the workpiece, no mechanical deformation. --Good processing flexibility, it can cut any graphics, such as pipes and other special-shaped materials. Different cutting thickness requires different laser power, please tell us your material, size and thickness, therefore we can recommend you the suitable laser cutting machine.
Introducing Luxus Export exquisite 2 kg cake box, meticulously crafted to take your baking creations to new heights of presentation and protection. With dimensions of *2 inches by *2 inches by 6 inches, this box is designed to perfectly contain your delicious cakes, ensuring they remain as stunning as the moment they left your kitchen. Made from high-quality paper material, Luxus Export cake box exudes sophistication and sturdiness in equal measure. Its robust construction guarantees that your delicate cakes are protected from external elements, such as humidity and temperature fluctuations, maintaining their freshness and flavor for longer. Here are some key features that make Luxus Export cake boxes stand out: - Elegant Design: The clean lines and flawless finish of Luxus Export cake boxes exude sophistication, making them the perfect complement to any occasion, from weddings to birthdays and beyond. - SAFE CLOSURE: Equipped with a secure closure mechanism, Luxus Export box ensures that your cake stays firmly in place during transit, preventing any mishaps or accidents along the way. - VERSATILE USE: While designed primarily for cakes, Luxus Export box is versatile enough to accommodate a variety of baked goods, including cupcakes, pastries and cookies, making it a versatile addition to any bakery or home kitchen. - Customization Options: Personalize your cake box with your logo, brand colors or custom designs to leave a lasting impression on your customers and enhance brand recognition. Experience the pinnacle of cake box excellence with Luxus Export premium quality packaging. Designed to protect and display your cake impeccably, it epitomizes elegance and durability. Step up your baking game today with Luxus Export exceptional cake box and make every sweet moment truly unforgettable.
Introducing Luxus Export exquisite 0.5 kg cake box, meticulously crafted to take your baking creations to new heights of presentation and protection. With dimensions of 8 inches by 8 inches by 5 inches, this box is designed to perfectly contain your delicious cakes, ensuring they remain as stunning as the moment they left your kitchen. Made from high-quality paper material, Luxus Export cake box exudes sophistication and sturdiness in equal measure. Its robust construction guarantees that your delicate cakes are protected from external elements, such as humidity and temperature fluctuations, maintaining their freshness and flavor for longer. Here are some key features that make Luxus Export cake boxes stand out: - Elegant Design: The clean lines and flawless finish of Luxus Export cake boxes exude sophistication, making them the perfect complement to any occasion, from weddings to birthdays and beyond. - SAFE CLOSURE: Equipped with a secure closure mechanism, Luxus Export box ensures that your cake stays firmly in place during transit, preventing any mishaps or accidents along the way. - VERSATILE USE: While designed primarily for cakes, Luxus Export box is versatile enough to accommodate a variety of baked goods, including cupcakes, pastries and cookies, making it a versatile addition to any bakery or home kitchen. - Customization Options: Personalize your cake box with your logo, brand colors or custom designs to leave a lasting impression on your customers and enhance brand recognition. Experience the pinnacle of cake box excellence with Luxus Export premium quality packaging. Designed to protect and display your cake impeccably, it epitomizes elegance and durability. Step up your baking game today with Luxus Export exceptional cake box and make every sweet moment truly unforgettable.
Starting a ruminant feed pellet plant has been a profitable business endeavor in many countries. The ruminant feed pellet machine line is mechanical equipment that specializes in making ruminant feed. For example, it can produce cattle feed, dairy cow feed, beef cattle feed, sheep feed, goat feed, camel feed, alpaca feed, and so on. How to make ruminant feed? You need Ruminant feed pellet machine line equipment. Herm machinery computer controls the ruminant feed pellet machine line with an output range of 1 ton/hour to 100 ton/hour, Complete ruminant feed pellet machine line includes raw material storage, cleaning machine, crushing machine, feed mixing machine, ruminant feed pellet maker, cooling machine, screening machine, packaging systems, transportation, and electronic control system. The complete ruminant feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of ruminants at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows ruminants to better utilize the nutrients in these ingredients. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the ruminant feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. Another, we provide free installation, training, factory design, and timely after-sales service.
Starting an animal feed milling machine has been a profitable business endeavor in many countries. The animal feed production line is mechanical equipment that specializes in making animal feed. For example, it can produce chicken feed, cattle feed, sheep feed, pig feed, horse feed, cat food, dog food, fish feed, shrimp feed, and so on. How to make animal feed? You need animal feed production line equipment. Herm machinery computer control animal feed pellet plant production line with an output range of 1ton/hour to 100ton/hour, Complete animal feed production line includes raw material storage, cleaning machine, crushing machine, feed mixing machine, animal feed pellet machine, cooling machine, screening machine, packaging systems, transportation, and electronic control system. The complete animal feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of animals at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows animals to better utilize the nutrients in these ingredients. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. Another, we provide free installation, training, factory design, and timely after-sales service.
Kowa TSN-553 15-45x55 PROMINAR Spotting Scope (Angled Viewing) Price:$1,299.99 SKU:EB-861613155 Brand:Nikon Availability:In Stock Shipping:Calculated at checkout Product Description Product Info for Kowa TSN-553 15-45x55 PROMINAR Spotting Scope (Angled Viewing) At less than a foot long, the 45�° angled-viewing Kowa TSN-553 15-45x55 Spotting Scope is the ideal companion wherever you go to glass. It employs the ultra-low dispersion PROMINAR fluoride glass that eliminates chromatic aberrations that, when coupled with the fully multi-coated optics and two-speed focusing mechanism, produce bright and clear tack-sharp high-contrast images with accurate color rendition for an immersive observational experience. The impressive zoom range allows you to take in a wide field of view for general viewing purposes, with the ability to draw subjects in close for more detailed observations. This version of the TSN-550 is configured with the eyepiece set at a 45�° angle relative to the optical tube to place your head in a comfortable viewing postion whether you're standing, sitting, or lying prone. Kowa TSN-553 Specs Design Viewing Angle Angled Performance Magnification 15 to 45x Objective Lens Diameter 55 mm Field of View 15x: 132.0' @ 1000 yd / 43.9 m @ 1000 m 45x: 69.0' @ 1000 yd / 23.0 m @ 1000 m Minimum Focus Distance 9.8' / 3.0 m Exit Pupil Diameter 15x: 3.7 mm 45x: 1.2 mm Eye Relief 16.5 to 16.0 mm Features Fogproof Yes, Nitrogen Filled Water Resistance Waterproof General Filter Thread 58 mm Tripod Mounting Thread 1/4"-20, 3/8"-16 Dimensions L: 10.6 x H: 6.0 x W: 2.6" / L: 26.9 x H: 15.2 x W: 6.6 cm Weight 28.5 oz / 808.0 g Packaging Info Package Weight 3.135 lb Box Dimensions (LxWxH) 12.85 x 7.4 x 3.55"
Duplex stainless steel comes in several grades, each with its own specific composition and properties. The most common duplex stainless steel grades are: Duplex 2205 (UNS S32205/S31803): This grade contains approximately 22% chromium, 5-6% nickel, 3% molybdenum, and a small amount of nitrogen. Duplex 2205 offers excellent corrosion resistance in a wide range of corrosive environments, including chloride-containing media such as seawater and brine solutions. It has high strength and good weldability, making it suitable for various applications in industries such as oil and gas, chemical processing, and marine engineering. Duplex 2507 (UNS S32750): Duplex 2507 contains higher chromium (24-26%), molybdenum (3-5%), and nitrogen compared to Duplex 2205. This grade offers superior corrosion resistance and higher strength than Duplex 2205, particularly in highly corrosive environments with high chloride content. Duplex 2507 is often used in aggressive environments such as offshore oil and gas production, chemical processing, and desalination plants. Duplex 2304 (UNS S32304): Duplex 2304 contains lower chromium (21-23%), nickel (3.5-5.5%), and molybdenum (0.05-0.6%) compared to Duplex 2205 and 2507. It offers good corrosion resistance in mild to moderately corrosive environments and higher strength than austenitic stainless steels. Duplex 2304 is commonly used in structural and architectural applications, as well as in chemical processing equipment and transportation vessels. Duplex LDX2101 (UNS S32101): Duplex LDX2101 contains lower chromium (21.5-22.5%), nickel (1.5-2.5%), and molybdenum (0.1-0.8%) compared to other duplex grades. It offers good corrosion resistance, high strength, and low thermal expansion, making it suitable for structural and industrial applications. Duplex LDX2101 is often used in structural components, storage tanks, and transportation equipment. These are some of the most commonly used grades of duplex stainless steel. Each grade offers a unique balance of corrosion resistance, mechanical properties, and cost-effectiveness, allowing engineers and designers to select the most suitable grade for specific applications based on performance requirements and environmental conditions.
Model features: This series of models is an open aluminum alloy profile structure heat shrink baking machine, suitable for electronic wire harness and new energy wire harness heat shrink tubes, circuit boards, inductor wire diagrams, copper bars, hardware accessories and other products (heat shrink baking size range small, but the product size is relatively long), or products that can only be heat-shrunk and baked at one end. 1. The machine uses far-infrared heating tubes for heating (the new energy wiring harness uses thermal radiation heat shrinkable tubes). There are heating tubes installed on the top, bottom, left and right, which can be heated at the same time. It is also equipped with a high-speed centrifugal fan, which can Stir the heat evenly to keep the entire box at a constant temperature; the products that need to be heat-shrunk and baked can be heated at the same time, maintaining the original characteristics of the product, so that the product does not deform or discolor after heat-shrinking or baking, and the quality Stablize: 2. Use high-temperature resistant Teflon mesh belt (temperature resistant 0-350), feeding in assembly line mode, fast baking speed and high efficiency: 3. Aluminum alloy profile structure mode, the mechanical size and structure can be customized and modified at will, and the machine model has a compact structure and exquisite design, and can also be moved and connected to the production line and controlled synchronously; 4. Intelligent control system, the heating temperature and speed can be adjusted at will, which can adapt to the temperature and heat shrinking time needs of different products; 5. Independent control electric box, away from high temperatures; the double-layer design of the heating box is sandwiched with high-temperature insulation cotton (temperature resistance 1200�°C), so that the surface temperature of the box will not be overheated, which not only makes the working environment comfortable, but also reduces Energy waste.
Product Description Its 3D lasted 12K Carbon Curv composite boot with a unibody sole stiffens the lower portion of the boot â?? helping you get the most energy out of every push. The new AMP FLEX facing and reflex tendon work together to provide even more flex so you gain a more powerful stride to attack the puck stronger. Experience power on a whole new level with the most advanced Supreme skate ever designed. KEY FEATURES 3D Lasted 12K Carbon Curv composite boot makes the skate lightweight, supportive, & thermoformable. AMP (active motion performance) FLEX Facing gives the upper portion of the skate more forward flex giving you a stronger stride. Choose Your Steel Performance lets you dial in the perfect steel option based on your specific style of play. POWERCOIL Tongue features an improved insert for faster recoil speed that helps explode into each stride. Detail Level of Play Elite Fit Profile Low, Medium & High Volume Heritage Supreme Ultrasonic / 2S Pro Heat Moldable Yes Tongue Powercoil Reinforced Felt Tendon Guard Flexible Reflex Facing AMP Flex Laces Unwaxed Midsole Composite Outsole Composite Unibody Lining Material Dual-Zone Lock Fit Pro Abrasion Reinforcement Yes Collar Padding Comfort Edge Ankle Padding AeroFoam Pro Footbed LockFit Pro w/ Memory Foam Finish Standard Polished Titanium High Polish Radius 10' 10' 10' Weight (Size 8) 95 grams 151 grams 151 grams Release Mechanism Quick-Release Spring
Color-coated aluminum coils are painted on the surface of aluminum substrates. Commonly used are fluorocarbon color-coated aluminum coils and polyester color-coated aluminum coils. They are widely used in aluminum-plastic panels, industrial factory roofs and walls, aluminum louvers, and composite panels. , aluminum ceilings, cans, electronic products. Commonly used alloy numbers for colored aluminum coils include AA1050, 1060, 1100, 3003, 3004, 3105, 5052, 5005, 5754, 5083, 6061, 6063, 8011, etc. Characteristics of color-coated aluminum coils: 1. Smoothness: There are no composite high temperature indentations on the surface. There is no residual stress on the board surface and no deformation after shearing. 2. Decoration: Painted with wood grain and stone grain, it has a realistic physical texture and a vivid natural beauty. The patterns can be made randomly, giving customers a wide range of personal choices, enriching the humanistic connotation of the product, and giving people more beautiful enjoyment. 3. Weather resistance: The paint pattern formed by continuous coating and high-temperature baking has high gloss retention, good color stability, and minimal color difference changes. Polyester paint has a 10-year warranty, and fluorocarbon paint has a 20-year or more warranty. 4. Mechanical: Use high-quality aluminum materials, plastics and adhesives, and adopt advanced composite technology. The product has the bending and flexural strength required for decorative panels. Under four-season climate conditions, changes in wind pressure, temperature, humidity and other factors will not cause bending, deformation, expansion, etc. 5. Environmental protection: It is resistant to salt, alkali and acid rain corrosion. It will not corrode or produce poisonous bacteria. It will not release any toxic gases and will not cause corrosion of keels and fixings. It is flame retardant. According to national regulations, it shall not be lower than B1 level.
It is an intermittent full automatic capsule filling machine with multiple tamping stations, precise design and stable performance. Following processes are completed: capsule feeding, capsule separating, powderfilling, defective capsule rejecting, capsule closing, finished capsule discharging automatically. It adopts closed rotary table with ten stations. There are 21 holes in1 row crossing on the module. Function of machine reaches international advanced standard, which also meets the requirement of GMP, CEand FDA standard. Itâ??s absolutely the most ideal machine for producing capsule products. Product INTRODUCTION Performance (1) Output: 3200pcs/min (2) Change speed by transducer, PLC control(C type) (3) Easy to operate and install (4) Function for filling powder, pellet, granule, pellet and pill into capsule. (5) Automatic detection and diagnosis of lack of material, capsule and mechanical trouble, make alarm and stop automatically. (6) Displaying in-time speed and accumulative output. (7) Available for electronic signature and recording, and Industrial Ethernet. Machine Advantage 1. Closed turret and dosing station,preventing powder come into the turret. Easy to operate, clean and change over the mould. 2. New turret design, adopt 90 linear bearings from Japan, to guarantee machine precision and use life 3. Adopt bigger cam&dosing disk design, enhance the stability of the machine and extend the use life of the machine 4. Equippedwith oil pump forsupply lubricate oil to the cam channel, reduce abrasion and extend use life of the parts 5. Automatic capsule switch, controlled by touch screen via PLC 6. Touch screenwith used-friendly graphic operator panel.
DHS056-50-1F The main parameters Number of circuits 50 Working temperature -40 ~+65 Rated current can be customized Working humidity 70% Rated voltage 0~240 VAC/VDC Protection level IP54 Insulation resistance 1000M @500VDC Housing material Aluminum Alloy Insulation strength 1500 VAC@50Hz,60s,2mA Electrical contact material Precious metal Dynamic resistance variation 10M Lead wire specification Colored Teflon insulated & tinned stranded flexible wire Rotating speed 0~600rpm Lead wire length 500mm + 20mm DHS056-50-1F series photoelectric slip ring 1 channel optical fiber + electric hybrid slip ring 1 optical fiber (supports single-mode/multi-mode), can transmit 1 optical fiber and 1~50 electrical signal paths at the same time, suitable for 360-degree unrestricted, continuous or intermittent rotation, and at the same time need to rotate from a fixed position to Locations where large-capacity data and signals are transmitted can improve mechanical performance, simplify system operation, and avoid damage to optical fibers due to the rotation of movable joints. Features Can transmit single or multiple optical fiber signals, multi-channel rotation; Optical fiber connectors can be selected from FC, SC, ST, SMA or LC (PC and APC), etc., which can hybridly transmit power supply, control signals, micro power signals required for instrumentation and computer automatic control; It can be used with traditional electric slip rings to form photoelectric hybrid bus rings to transmit power and high-speed data; No contact, no friction, long life, up to 100 million revolutions (more than 200-300 million revolutions for a single core); Safe and reliable, no leakage, no electromagnetic interference, and can be transmitted over long distances;
Product namecopper  wire meshcopper wire screencopper fabriccopper woven mesh Materialpure copper Weave typeplaintwilldutch weave Mesh size1400mesh Hole size200038mm Roll width1 12 15 18 2 meters and other width Roll Length 30 60 meters Features The most widely used copper alloy for wire cloth Nonmagnetic in all forms Red in color following weaving will slowly patina to a greenishblue color known as verdigris Withstands outdoor exposure without rusting Superior resistance to atmospheric corrosion vs bronze brass alloys Corrodes when exposed to ammonia and other salts Excellent thermal and electrical conductivity Antimicrobial Can be cut formed and welded Application Given its mechanical thermal and electrical properties copper wire cloth is principally used in Faraday cages RFI shielding HVAC units and other electrical applications Due to its unique patina color copper wire mesh is frequently used by architects artists designers and homeowners in both decorative and functional settings Additional industries and applications which commonly use copper wire cloth include Aerospace Bookbinding Cabinets Fireplace Screen Electric Heaters Energy Storage Gamma Irradiators Gutter Guard Health Body and Mind Enrichment Insect Screen Liquid Filtration Particle Separation Marine Military Shelters Modular Containers Papermaking Pest Control Fumigation Robotics Roofing Root Control Sculptures Soffit Screen Wall Panels Wood Working Package Moistureproof paper bubble film wooden box Shipping details Express FEDEX DHL UPS air transportation sea transportation land transportation rail transportation
PRODUCT SPECIFICATIONS FEATURES Upholstery Material: Top Grain Leather 7000 Color: Midnight Blue Quality: High Quality Materials and Construction Row Style: Straight Adjustable Power Headrest: Yes Adjustable Power Lumbar: Yes Cupholder Type: Blue LED Lighting Recline Mechanism: Power Recline Power Amperage: Standard 110v Plug Footrest: Chaise Style Padded Footrest Wallhugger: Yes, 6" from wall needed for full recline. Armrest Height: 26" Armrest Style: Padded w/ In-Arm Storage USB Charging: FREE USB Charging Port Equipped in Each Power Recline Switch, 1 Per Seat Easy-Off Backrest: Yes Baselighting: No Item SKU: 88-1895 CONSTRUCTION Frame Construction: Reinforced, Engineered, and Kiln-Dried Solid Wood Frame Joint Construction: Blocked Reinforced Springs: Pocketed Coil Springs Foam Type: High Resilience w/ Cool Gel Foam Density: 2.2 Density Memory Foam Weight Capacity: 350 lbs. Per Seat California Residents: WARNING, Proposition 65 Notice ASSEMBLY Assembly Required: Easy quick-connect backrest installation to allow for passage through doorways and hallways. PRODUCT DESCRIPTION Seatcraft Apex Midnight Blue Home Theater Seating Elevate your home with Seatcraft Apex leather home theater seats. Enjoy power recline, headrest, and lumbar support. Equipped with lighted cupholders, USB charging, and in-arm storage. Enhance your cinematic experience with the optional Sound Shakers.
Basic Specification: Accessories: According to different production batches, matching accessories may vary, and the actual product shall prevail! Any questions 1. Up to 95% power efficiency and more than 93% Full Load efficiency 2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation. 3. Intelligent temperature compensation function in the charging process, preventing the damage to battery caused by charge-off or charge due, greatly extending the lifespan of battery. 4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth). 5.Operation temperatureï¼?- 40â??ï½?85â??ï¼?Storage temperatureï¼?- 55â??ï½?85â??ï¼?Mechanical impact and vibration gradeï¼?QC/T 895ï¼?2011ï¼?Automotive-grade seismic rating. 6. Temperature control with built-in heat-sensing device and automatic recover through the thermal protection. 7. Multi-safety protection functions. 8. LED charge status indication with diagnose support function. 9. Available for various kinds batteries like LiFePO4, Lithium battery etc., Flexible and programmable of the charging mode. Equipped with Enable Control(Automatic Control) or CAN communication interface to realize real-time communication with BMS for options. 10.Input current:16A 11.Power factorï¼?â?¥0.99 12.Charging control: CAN or Enable 13.Sizeï¼?198(length) x 244(width) x 95(height)(fan-cooled) 14.Weight only 7.6 kg! 15.Cooling way: Enforce Air Cooling Safety protections: 1) Input over/under voltage and reverse polarity protection; 2) Output over current / short circuit and over temp protection.
Optical measurement camera Tracking and navigating in sub-millimeter accuracyOverall tacking/processing unit Overall design of workstation and optical measurement camera helps to maximize space in the OR 3D reference marker Navigate the instrumentation guide to the right position through pre-op plan34 inches LCD surgical monitor Large angle rotatable and large size LCD monitor for easy image reviewingPre-op planning system Screwsâ??trajectory and position planning 29 inches workstation monitor Displaying real-time modified plan and mechanical sensor feeback6-way directional moving robotic arm State-of-art robotic arm and built-in force sensor provide high accruateinstrumentationSelf-adaptive calibration Perlove Medical is the first manufacturer in China that combines intraoperative 3D imaging C-arm and spine surgical navigation system. Equipped with the intraoperative 3 D imaging C arm system which independently developed and produced by Perlove, PL300B, which integrated with self-adaptive calibration technology, can realize image automatic registration, and automatically estab-lishes the association of three coordinate systems, the optical position gauge, the patient and the image. No manual intervention is required in registration process, and the accuracy is not affected by the image quality. It brings stron-ger system compatibility, more accurate coordination matching and more convenient calibration.Self navigation Surgical arm can be precisely sent to the right position through wellplanned trajectory, ensuring consistency between pre-op surgicalplan and intra-op surgical outcome. Real time motion tracking Real time motion tracking and position modifing, ensuring precise screw placement. High-precision robotic arm The smart navigation system and robotic arm deliver high degree ofaccuracy, effectively decreasing complication rate and revision rate. Positioning with accuracy Equipped with cutting-edge optical tracking sensor and robotic arm,PL300B utilize intraoperative 3D based imageto make pre-operative plan, allowing surgeon to performspinal MIS with submillimeter accurate navigation.Especially for high-risk and complex procedure, it hasobvious advantages and can effectively reduce surgicalrisk.
This Auto Flush Unit Is Used For Residential As Well Commercial Ro Plants. 24 Volt Operated And 36 Volt Operated Available. How Reverse Osmosis Flush Valves Work Flush Valves Are Used On Some But Not All Reverse Osmosis Units. If You Have A Standard Ro Unit, It Probably Doesn'T Have One. The Purpose Of The Flush System Is To Help Prevent Scaling Or Fouling Of The Ro Membrane(S) By Providing A Rapid Rinse Which Washes Away Impurities And Keeps The Membrane Clean. Standard Ro Units Are Not Normally Fitted With Flush Valves, But These Can Be Easily Added. They Are Commonly Manually Controlled, But Sophiticated Electronic Flush Valves Can Be Used For Ro Units. The Autoflush Noticeably Increases The Service Life Of The Membranes In Reverse Osmosis Systems And Optimizes The Control Between Production And Necessary Flushing Intervals. The Interval Flushing Ensures That Crystallization Does Not Result In Deposits On The Membrane Surface As Is Frequently The Case With Longer And More Traditional Production Phases. As Soon As The Reverse Osmosis System Is Started, Autoflush Switches To Flushing Mode To Remove Old Water From The System. After Switching To Production Mode, The Flushing Valve Now Automatically Controls The Interval Flushing Cycles. The Hourly Interval Flushing Of 10 To 15 Seconds Increases The Cleaning Effect Of The Flushing Process And The Overall Water Consumption Is Clearly Lowered. Automatic Interval Flushing Every 50 To 60 Minutes Of Operation Automatic Self-Cleaning Of The Flushing Valve Sealed, Robust Electro-Mechanical Components For Extra Long Service Life Easily Retrofitted To Almost All Commonly Available Reverse Osmosis Systems Ideal For All Areas Where Minimum Maintenance Is Desired Or Required.
