Price - US $ 200.00 Per Metric Ton CIF Payment terms: 100% L/C Preferred. If you want start with a 1st order TT Payment See the details below. : Normal my minimum quantity: 200MT CIF Any port. See the below. 5% security advance payment start with processing & the rest of the deposit (95%), to make goods available and to facilitate packaging, all the documents ready. TT or L/C pay at the sights after the 3rd party inspection reports and loading reports is done & completed. 2nd order & up 100% L/C. Quantity less than 200MT The payment Term: 20% security advance payment start with processing & the rest of the deposit (80%), to make goods available and to facilitate packaging, all the documents ready. TT or L/C pay at the sights after the 3rd party inspection reports and loading reports is done & completed. 2nd order & up 100% L/C.
We supply Light Cycle OIl (LCO) Origin: Kazakhstan First Lift: 50,000 Metric Tonnes Contract: up to 100,000 MT/month x 12 months CIF Price: USD $270/MT LCO, a by-product of the fluid catalytic cracking (FCC) process in a petroleum refinery, can be used as a blendstock for the production of diesel and jet fuels. Light Cycle Oil (LCO) is the diesel boiling range material, which is produced in addition to gas and petrol in the Fluid Catalytic Cracking Unit (FCCU). The optimised partial conversion hydrocracking process provides an effective and flexible process to process LCO into desired products such as very-low sulphur diesel and high-octane high-aromatics naphtha.
BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;
Wholesale Light cycle oil Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight. Primary Characteristics: Appearance: Typically amber to dark brown liquid. Odor: Characteristic petroleum smell. Density: Intermediate, falling between lighter distillates and heavier oils. Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline. Applications: Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards.
Light Cycle Oil, also known as LCO, is a refined product derived from the processing of crude oil. It has a higher density and boiling point range compared to diesel fuel but lower than heavy fuel oil. LCO is commonly used as a feedstock for fluid catalytic cracking units (FCCU) and is also used as a blend component for marine fuels.
We have West Texas Intermediate, Brent Crude, and Jet fuel supplied by Royal Dutch Shell for sale. No upfront fees; minimum 500,000 barrels.
COMMODITIY : OMAN LIGHT CRUDE OIL ORIGIN : OMAN Quantity per Month: 6,000,000 Barrels Contract : 12 months Roll's extensions Price : Gulf Platt minus 4.50$ per bbl Inspection: Inspection document must be issued by SGS, Or similar International Inspection companies, like CHEOCHEM. Payment Terms : Payment by DLC MT700 Verbiage (100% sight, Irrevocable and Confirmed), valid for 365 days to be issued by / from a credit worthy Bank in Euro currency in Favour of the Seller. Packing : Bulk Delivery : 30 days from LC
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
We supply 100% used engine oil /Used Engine Oil/Waste Engine Oil/UEO from vehicles, which are of higher quality and quantities at very good competitive prices, and we have the ability to supply up to 2500 MT per month, as we try to keep the quality at the highest in its grade. Water : +/- 2% Gross calorific Value : Min 10 000 Kcal Sulfur content : Max 0. Packaging & Delivery Packaging Details: DRUMS or as per buyer's request Delivery Detail: prompt delivery once order is confirmed
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 â?? iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
Crane Rail's Model:QU70 rail,QU80 rail,QU100 rail,QU120 rail, QU70 Rail is use for for crane and trolley track. Compared with the railway's heavy rail, crane rail height is low and head width thick waist size is bigger.Crane rail is on heavy rail in our country for the quality inspection is only required to chemical composition and tensile strength. Due to the production batch, the specific model is different, the above of pictures are for reference only, for further details you can contact our sales staff to carry out the specific verification .
Light-Heavy Crude Oil, from Arab Gulf non sanctioned origin, best realistic economic conditions, safest workable procedures, transparent annul contracts, 12 monthly deliveries, transaction executed bank to bank through our Primary Banks, , delivery on STO & CIF ASWP,, zero upfront payment.
Light-Heavy Crude Oil, from Arab Gulf non sanctioned origin, best realistic economic conditions, safest workable procedures, transparent annul contracts, 12 monthly deliveries, transaction executed bank to bank through our Primary Banks, delivery on STO & CIF ASWP,, zero upfront payment.
We Supply Used cooking oil for Bio diesel and others as below : USED COOKING OIL SPECIFICATION Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01 Packaging & delivery TRANSPERENT PET BOTTLES * 1L, 3 L,5 Liters and in bulk PET Transparent Bottle (With Handle). JERRYCANS * 5 L, 10 L, 20 L, 25 L and 220 Liters Jerry can. METAL TIN * 16 L, 14 kg (with or without carton), 15 L / 15 kg, 16 kg (with or without carton 17 L / 17 kg, 18 L / 18 kg, 20L Metal Tin with Bung Hole (Round or Square) and 211 Liters Metal Drum. FLEXI TANK 20 MT Flexi Tank.