*2pcs ultra bright LEDS *Power:1 or 2pcs 4R25 6V battery *7''standard lens with advanced optics *Inside switch with photocell make the light dusk on and dawn off *Steady and flash mode available *Standard flash rate in 65+/-10 times/minute *With plastic handle *Metal braket available according to requirement *Lens and base colors: yellow,orange,green and red available depends
Led Road Traffic Safety Baton Light With 2 Flashing Modes (red & Green)
Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25 C: 60-70 dmm Softening Point: 49-56 C Flash Point: Minimum 232 C Ductility at 25 C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.
Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25C: 60-70 dmm Softening Point: 49-56C Flash Point: Minimum 232C Ductility at 25C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.
Height: 100 cm Base size: 49 x 49 cm Product above the plastic, the base rubber
Power Consumption: Full Ball ¡¨¹ 5w Working Voltage: 85-265vac-50/60hz , 12v/24vdc; Wave Length (nm): Red:625¡¨¤5;green:505¡¨¤5 Led Q¡¡¥ty: Red-61 Pcs;green - 61 Pcs Housing Material: Pc, Uv Resistant Life Span: >100, 000 Hours. Delivery Time: Samples Within 5days, Lot Of Order Within 15days. Certificates: Ce, Chinese Gb14887-2003 Standards, Ip65. Warranty Time: 2 Years 65*33*24cm 1pcs/carton Gw:5.5kg Nw:4kg K=k Carton
Model: traffic light(jd3003-02) Specification Size: 200mm/300mm/400mm Material: Size: 200mm, material p Size: 300mm, material pc/ aluminum Size: 400mm, material: pc/aluminum Natinal standard: gb14887-2011 Water proof grade: ip54 Lifetime: ¡ý 50, 000 hours Mode of connection: dc 12v/24v public pole is positive pole Intensity:red ¡ý 550cdyellow ¡ý 550cdgreen ¡ý 1000cd Wavelength: red 625¡à5nm yellow 590¡à5nm green 505¡à5nm Visual angle: 30¡ã Working temperature: -40¡ãc- + 80¡ã Visual range: ¡ý 400 meters Working humidity: 0-95% Package:90*35*30cm/carton, 2 pcs/carton Input voltage: ac 220v¡à10% or dc 12v/24v Input power: red (yellow) disk¡ü12va green disk¡ü15va Withstand voltage: 1500vac Note: 1)the light can be assembled according with client need. 2)all bolts, screws and hoops will be supplied to fix the traffic signal head to the pole. Optus limited Model: traffic light(jd3003-02) Specification Size: 200mm/300mm/400mm Material: Size: 200mm, material p Size: 300mm, material pc/ aluminum Size: 400mm, material: pc/aluminum Natinal standard: gb14887-2011 Water proof grade: ip54 Lifetime: ≥ 50, 000 hours Mode of connection: dc 12v/24v public pole is positive pole Intensity:red ≥ 550cdyellow ≥ 550cdgreen ≥ 1000cd Wavelength: red 625±5nm yellow 590±5nm green 505±5nm Visual angle: 30° Working temperature: -40°c- + 80° Visual range: ≥ 400 meters Working humidity: 0-95% Package:90*35*30cm/carton, 2 pcs/carton Input voltage: ac 220v±10% or dc 12v/24v Input power: red (yellow) diskva green diskva Withstand voltage: 1500vac Note: 1)the light can be assembled according with client need. 2)all bolts, screws and hoops will be supplied to fix the traffic signal head to the pole. Optus limited
Size:100mm;200mm;300mm;400mm;500mm Voltage: DC12V; DC24V; AC110V; AC220C Power: National Grid; Solar Energy Material: Aluminum; PC Lighting: LED Installation: Vertical; Horizontal Light Style: Full Ball Light (used for vehicle lane) Arrow Light (used for vehicle direction lane) Pedestrian Light (used for pedestrian crosswalk, red stop, green go) Bicycle Light (used for bicycle lane, red stop, green go) Countdown Timer (can mixed with above light for using, counts in seconds) Draft of Installation: Horizontal installation Vertical installation.
*Material: HDPE cone body and 100% recycle rubber base *Height: 75cm *Base Size: 44x44cm *Weight: 4.3kgs *With 30cm reflective tape
The traffic sign system is completely self-contained, with all components (including solar modules, rechargeable batteries, sensors and electronics) integrated within a sleek, compact and durable pole-mounted design. Traffic signs use an array of high brightness LEDs for illumination. These LEDs are durable, reliable, long-lasting and are available in a range of popular colors.
Material: cone pe, base rubber Height: 500mm Base size: 280x280mm High bright reflection film Weight: 1.5kg/pc
Traffic sign
Spec.: 230mm, 500mm, 700mm, 750mm, 780mm, 900mm, 1000mm Description: traffic cone/ roadway safety / traffic safety Material: rubber / pvc / pe Use: use for requiring compart vehicle temporarily, guiding traffic, directing vehicle crossing this dangerous, protect facilities and person in construction. This product should be installed a warning lights if used in darkness. Characteristic: lightfast (the highest) is 8.5 grade. It will be not rupture under -40~70c temperature, durable exceed 2 years. For plastic cone, this superstructure and bottom could be separated, it will be easily fixed and replaced. Fitting parts: warning lights of inner / outer / hang, plastic warning chain, all kinds of baluster and sign brand. Reflective material of cone surface: reflective film, pvc reflective sleeve, reflective powder, it will be chosed by customer according to your requirements.
Specification: 1. Height : 1000 mm 2. Weight : 5.0 kg 3. Body material: pe 4. Base material:rubber 5. Bottom size :490* 490 mm
Traffic signs packing in carttons
Optus will be offering a number of professional services as part of its systems integration capability in deploying urban traffic management control systems. Optus are able to provide a traffic intersection design service whereby professional traffic engineers will analyse an existing or new intersection and design the phasing of the signal groups and use that information to configure the sutiabletraffic signal controllers. The intersection design service also extends to performing an optimization analysis to ensure travel times are reduced
The term bitumen refers to a substance produced through the distillation of crude oil. Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. The two Bitumen grades are 60/70 and 80/100. The difference between 60/70 and 80/100 penetration grade is the penetration range.� Bitumen 60/70 has lower penetration which means it is harder than bitumen 80/100. Bitumen 60/70 is better suited for use in hot climates and can withstand heavy traffic loads, unlike bitumen 80/100. According to the ASTM D36 method,� the softening point of bitumen 60/70 is between 49 to 56�°C, and the flash point of bitumen 60/70 is 250 �°C. Another important factor is density. Due to the ASTM D70, the density of bitumen 60/70 is equal to 1.0344. Bitumen Penetration Grade 85/100 is� a standard penetration grade. Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.
Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. Technical Features: 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, it's very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiency 94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
SANDI 30KW DC to AC inverter with 120/240V split-phase off grid inverter with CSA/UL1741 Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. Technical Features: 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. Itâ??s service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, itâ??s very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiencyâ?¥94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
40Kw Off Grid Inverter With CSA/UL Approved Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. Itâ??s service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, itâ??s very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiency 94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
