1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stationsâ?? need, there are 48Vã??96Vã??120Vã??192Vã??220Vã??240Vã?? 360Vã??384Vã??480Vã??492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
- Shingle Mono Cells PV Modules Type: 380~400W / 390~410W / 455~475W / 470~490 W / 635~655 W / 635~660W; - Monocrystalline Silicon PERC solar Cells: 158.75*158.75mm for 66SA / 78SA, 166*166mm for 60SB/72SB, 210*210mm for 72SC/72SCD; - Maximum System Voltage (V): DC 1000/1500(IEC); - Dimensions (L*W*H): 1646*1140*35 mm / 1969*1140*35 mm / 1719*1140*35 mm / 2056*1140*35 mm / 2355*1303*35 mm / 2355*1303*30 mm; - Front Glass: AR coating tempered glass, 3.2mm / AR coating tempered glass, 2.0mm for Bifacial modules; - Back Sheet: high weatherability backsheet / tempered glass, 2.0m for Bifacial modules; - Frame: Anodized aluminum profile, Junction Box: IP68 , TUV ,three diodes; - Cable: 1000/1200mm, 1*4mm/ 800mm (Vertical),+250mm/-150mm(Horizontal), 4mm - Connector: Compatible with MC4/original.
1. Watt: 100W / 200W / 300W ( LED 15W / 20W / 30W) 2. Housing: ABS 3. Lumen: 1600~3300 lumens 4. Working hour: 12 hours 5. Solar Panel: Polycrystalline Silicon 6V/15Wp/24Wp/30Wp 6. Battery: 15Ah/22Ah/30Ah 3.2V LiFePO4 Battery 7. Light Size: L475~710mm * W360mm * H70mm 8. Solar Panel Size: 335mm*360mm~590 mm 9. Rainy Day Time: 2-3 days 10. Led Chip:5730 SMD 696PCS/864PCS/1392PCS 11. Exposure area: 50~100 Square 12. Packing:L510~740mm * W385 * H400mm/4~5pcs 13. IP Rating: IP65 14. Warranty for 1 years
Solar Panel Cleaning System, Water Fed Brush and Extendable Telescopic Poles with Hose Package Includes all the accessories: 1 x Telescopic pole 1 x Brush head 1 x Angel adapter 1 x 12m/39ft water pipe 1 x 8m/26ft water pipe,6pcs x 10cm Water Pipes 1 x EN-copper quick connect 1 x Plastic quick connect 1 x Faucet quick connect 4pcs x Hose fittings 1 x M4 Screwdriver 1 x Product Manual Additional information Weight N/A Dimensions N/A Size 12FT/3.6M, 18FT/5.4M, 20FT/6M, 24FT/7.2M, 30FT/9M, 36FT/10.8M
Off grid Rated power: 1000W Dimension(W/H/D): 225*355*92mm Net weight: 5kgs LCD display This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Power (W): 150; CCT (K): 3000/4000/6500; Luminous flux (lm): 1500; CRI: >70; Lifespan (hrs): 30,000; IP65; Solar Panel: Poly Crystalline Technology, Power (W): 30, Voltage (V): 6, Lifespan: 20 years; Battery: Lithium LiFePO4 Technology, Capacity (Ah): 20, Voltage (V): 3.2, Lifespan: 10 years; Smart charge, discharge control enable battery protection and longer lighting time; Using a light sensor or remote control for on/off modes; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W):350; CCT (K): 3000/6500; Luminous flux (lm): 2500; CRI: >70 Life span (hrs): 30,000; IP65; Solar Panel: Poly Crystalline Technology, Power (W): 55, Voltage (V): 6, Lifespan: 20 years; Battery: Lithium LiFePO4 Technology, Capacity (Ah): 35, Voltage (V): 3.2, Lifespan: 10 years; Using light sensor or remote control for on/off modes, Dimmable; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W):200/300/400/500; CCT (K): 3000/6500; Luminous flux (lm): 1200/1800/3200/4500; CRI: >70 Life span (hrs): 30,000; IP66; Solar Panel: Poly Crystalline Technology, Power (W): 18/30/50/60, Voltage (V): 2/12, Lifespan: 20 years; Battery: Lithium LiFePO4 Technology, Capacity (Ah): 15/12/18, Voltage (V): 3.2/9.6/27.5, Lifespan: 10 years; Using an ambient light sensor or remote control for on/off modes, Motion radar sensor; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 30/40/50/70/100/150/350; CCT (K): 3000/6500; Luminous flux (lm): 1200/1300/1700/2000/3000/3500/4000; CRI: 70 Life span (hrs): 30,000; IP65 Solar Panel: Poly Crystalline Technology, Power (W): 20/40/55, Lifespan: 20 years; Battery: Lithium LiFePO4 Technology, Capacity (Ah): 15/20/30/35/40, Lifespan: 10 years, Using light sensor or remote control for on/off modes, Dimmable; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 70/90; CTT (K): 5000/6500; Luminous flux (lm): 3000/4600; CRI: >70; Lifespan (hrs): 50,000; IP65; Solar panel: Voltage (V): 5, Power (W): 70/95; Battery: Voltage (V): 3.2, Capacity (Ah): 65; Using light sensor or remote control for on/off modes, Dimmable; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 3 years; OEM accepted;
100% Solar Air Conditioner Description / Features : Saves upto 65% on energy bills Equipped with highly efficient compressor with BLDC (Brush Less DC) motor There wonot be any Jerk Loads They are compatible with inverters Consumes less watts for same output power Will be installed by trainer and professional team at customer premises Models Available : S Model : AC runs directly on Solar panels without any need of inverters / electrical supply / Batteries S&E Model : AC runs on all modes it can run only on Solar / it can run on Solar + Electrical connection / it can run on Solar + Batteries through Inverters Applications : Domestic : Houses , Flats , Bungalows , Villas Commercial : Hotels , Hospitals , Malls , Shops , Complexes Industrial : Container offices , Remote Site Locations Warranty terms : Solar modules will be coming with 25 years efficiency guarantee and 15 years product warranty Solar AC unit with compressor comes with warranty of 1 year Solar Batteries comes with warranty of 3 years
Product Description Solar Power Air Conditioner Construction Worker Helmet Safety Product Feature â?? 80mm Diameter Fan, Strong wind cooling. â?? 1W Solar Panel, Keep Fan Working over 8 Hours and Charging Li-on Battery under Sunshine. â?? 6000mAh Li-on Battery, Keep Fan working over 48 Hours or Phone Charging. â?? Ultra Sright Solar1W LED Flashlight, Send SOS Message in Emergencies. â?? Red Taillights to Protect Workers at Night. â?? Sensitive Compass and Thermometer. â?? High Quality ABS Raw Material. â?? Application: Mining, Oil & Gas, Construction, Utilities, Forestry, Chemical, Pharmaceutical, Aerospace, and Manufacturing etc. â?? Package: PE/Carton, or Customized. â?? OEM/ODM is available, we are able to make the sample and mass produce the cable according to your requests or drawings. If you have good idea and project, please you contact us, thanks!
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates.