Find Verified Silica Sand Afs From 20 120 Suppliers, Manufacturers and Wholesalers

Application of Silica Flour : Silica Flour has a variety of applications, including: 1. Used as cleaning products 2. Additives for soap, toothpaste and paint 3. Filling and reinforcing rubber, plastic, paper, and road surface materials (asphalt) 4. Used in pharmaceutical products 5. Used in casting and glass production 6. For the production of ceramics, tiles, porcelain, and clay 7. Used in making bricks, concrete, and cement 8. Production of cosmetics and skin care products 9. To increase the cement strength of oil wells (in combination with refractory cement) In addition to the above, Silica Flour is used in conjunction with industrial raw products such as calcium carbonate, and limestone. The most common uses of silica powder are in the following cases: 1. Production of glass and clay 2. Use in oil wells 3. Production of construction materials 4. Production of ceramics 5. Fiberglass production 6. Use as an additive

Application of Silica Flour : Silica Flour has a variety of applications, including: 1. Used as cleaning products 2. Additives for soap, toothpaste and paint 3. Filling and reinforcing rubber, plastic, paper, and road surface materials (asphalt) 4. Used in pharmaceutical products 5. Used in casting and glass production 6. For the production of ceramics, tiles, porcelain, and clay 7. Used in making bricks, concrete, and cement 8. Production of cosmetics and skin care products 9. To increase the cement strength of oil wells (in combination with refractory cement) In addition to the above, Silica Flour is used in conjunction with industrial raw products such as calcium carbonate, and limestone. The most common uses of silica powder are in the following cases: 1. Production of glass and clay 2. Use in oil wells 3. Production of construction materials 4. Production of ceramics 5. Fiberglass production 6. Use as an additive

Application of Silica Flour : Silica Flour has a variety of applications, including: 1. Used as cleaning products 2. Additives for soap, toothpaste and paint 3. Filling and reinforcing rubber, plastic, paper, and road surface materials (asphalt) 4. Used in pharmaceutical products 5. Used in casting and glass production 6. For the production of ceramics, tiles, porcelain, and clay 7. Used in making bricks, concrete, and cement 8. Production of cosmetics and skin care products 9. To increase the cement strength of oil wells (in combination with refractory cement) In addition to the above, Silica Flour is used in conjunction with industrial raw products such as calcium carbonate, and limestone. The most common uses of silica powder are in the following cases: 1. Production of glass and clay 2. Use in oil wells 3. Production of construction materials 4. Production of ceramics 5. Fiberglass production 6. Use as an additive

Quartz We also offer premium quartz products that are widely used in industries such as construction, glassmaking, and electronics. Our quartz powder is A-grade and is known for its high purity (99.8% or higher), making it ideal for demanding applications like solar panels, semiconductors, and glass production. Available in various grades and sizes, we offer powder, chips, grits, and granules to suit various industrial needs. Our quartz is sourced from top-quality reserves and is processed using advanced techniques to ensure maximum purity and consistency. Whether for industrial applications or cosmetic use, our quartz products stand out for their superior quality and competitive pricing. We ship FOB from Chennai, and all orders are handled with care, ensuring timely and safe delivery. Fine quartz powder ready for industrial use.

Can supply: PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade. Post industrial. Materials are bulk. Can load bulk in 1x40' Open Top container approx. 20-24 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: COTTON WASTE BALES. POST INDUSTRIAL. WASTE FROM FACTORY THAT PRODUCE COTTON SWAB FOR CLEANING EARS. MAY CONTAIN FOREIGHT BODIES approx. 1% (because of baling procedure). Can load in 1x40�¢??HC container approx. 20 MT (�± 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.