Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout. It was developed from other types of hydraulic lime in England in the mid 19th century, and usually originates from limestone Origins: Iran,pakistan,malaysia,portland
Portland cement 42.5
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3
Name of Product : Portland cement Price of Portland cement FOB. Portland 52.5 N (1.5 tonne jumbo bag) - 52 $ / MT Portland 42.5 N (1.5 tonne jumbo bag) - 51 $ / MT Portland 42.5 R (1.5 tonne jumbo bag) - 49 $ / MT Portland 32.5 N (1.5 tonne jumbo bag) - 46.50 $ / MT Portland 32.5 R (1.5 tonne jumbo bag) - 46 $ / MT Portland 52.5 N (pack in 50kg bag then put into 2 tonne sling bags ) - 56 $ / MT Portland 42.5 N (pack in 50kg bag then put into 2 tonne sling bags ) - 55 $ / MT Portland 42.5 R (pack in 50kg bag then put into 2 tonne sling bags ) - 53 $ / MT Portland 32.5 N (pack in 50kg bag then put into 2 tonne sling bags ) - 50.50 $ / MT Portland 32.5 R (pack in 50kg bag then put into 2 tonne sling bags ) - 50 $ / MT Price - Negotiable
Cement Portland CEM I 42.5 N, product available, prodution capacity: more than 100000 t/day.
We would like to offer our Origin Building Materials for as follows: 1. Commodity: Portland Cement Type 1 42.5N and 52.5N Available direct from the factory manufacturer. 2. Production Capacity: More than 100,000MT Per Month. 3. Packaging: 40Kg/50Kg Kraft Paper Bag and/or Bulk Shipment. 5. Incoterms: FOB and/or CIF to be discussed. 6. Price: FOB $95 USD/MT. If you have any interest please send us your detailed request providing official LOI with letter headed company signatory and stamped.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Portland Cement Type I
Best quality Portland Cement Type 42.5. Packing possible 50kg bags, bags in jumbo or bulk in jumbo.
Best quality Portland Cement Type 52.5. Packing possible 50kg bags, bags in jumbo or bulk in jumbo.
Ordinary Portland Cement (OPC) Bosowa Cement is high quality portland cement that has met national standards, namely SNI 2049: 2015 and international standards namely ASTMC 150 / C150M-12 and European standards EN 197 -1 CEM I. Portland cement type I is a suitable type of cement for a wide variety of concrete applications where special requirements are not required. USAGE: Bosowa Ordinary Portland Cement (OPC) can be used for road building construction, bridges and buildings, in addition, several projects development in Indonesia also uses BSW Ordinary Portland Cement (OPC) composite such as Sultan Hasanuddin Airport, Bridge II of Samarinda City, Jayapura Underpass and so on.
BSW Portland Composite Cement (PCC) is at National standardized : SNI 7064: 2014 and International standard namely European EN197-1 CEM II is Portland cement with high quality. The hydraulic cement produced by grinding Portland cement clinker and Gypsum is easier to work with and producing a time-saving work. Bosowa Portland Composite Cement (PCC) can be used for general construction such as concrete work, masonry, gutters, driveways, walls, and manufacture of special building elements such as precast concrete, prestressed concrete, panels concrete, and also paving blocks
Portland Cement Type 01 / ASTM C150 / 50 Kg Bag
Supplied in 2 Variants : PCB 40 White in 50 kg bag and PCB 50 Grey in 750 kg Jumbo Sling bag. Equivalent Standard : BS EN 197-1: 2000 42.5R and ASTM C150 Type 1.
We manufacture this type of cement with limestone, low iron content kaolin clay, and gypsum. Customers use our White Portland Cement in architectural works requiring great brightness and artistic finishes, to create mosaics and artificial granite, and for sculptural casts and other applications where white prevails.
Our Cement is a fine powder, obtained from the calcination at 1,450 C of a mix of limestone, clay, and iron ore. The product of the calcination process is clinker the main ingredient of cement that is finely ground with gypsum and other chemical additives to produce cement. We offers an array of blended cements which have a lower CO2 footprint resulting from their lower clinker content due to the addition of supplementary cementitious materials. The use of blended cements reinforces our strong dedication to sustainable practices and furthers our objective of offering an increasing range of more sustainable products.
Product: OPC BS EN 197-1:2000 CEM-1 42.5N/R SRC BS 4027 : 1996 Class 42.5N-LA MSRC ASTM C 150 - 1997 TYPE II
Sulfate-Resisting Portland Cement conforming to BS 40271996 Class 42.5 N-LA, as well as ASTM C 150-18, Type V.
Cement prices fob turkey ports usd 80.00-95.00 pmt. Cement types Cem II 42, 5 R fob usd ask placed on the market in bulk or in 50 kg bags. Cem I 42, 5 R fob usd ask placed on the market in bulk or in 50 kg bags. Cem I 52.5 N ask. Placed on the market in bulk or in 1500 kg big bags.
orign Turkey Cement types ; Cem ll 42, 5 r fob usd ask placed on the market in bulk or in 50 kg bags. Cem l 42, 5 r fob usd ask placed on the market in bulk or in 50 kg bags. Cem l 52.5 n ask. Placed on the market in bulk or in 1500 kg big bags. Cem l 52.5 rack. Placed on the market in bulk or in 1500 kg big bags.
