Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 8 parallel lanes on 850nm center wavelength * Compliant to IEEE 802.3bs Specification * Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC * Operating case temperature: 0 to 70�°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 53.125Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-16 connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking
Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network. To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application. General features * NB-IoT Tri-bandB3/B5/B8 * EGPRS Dual-bandB5/B8 * Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands) * Supply voltage range 3.1V-4.2V * Low Power consumption - eDRX mode:
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike. General features * Tri-Band FDD-LTE B3/B8/B20 * GPRS/EDGE 900/1800Mhz * Output power - GSM900: 2W - DCS1800: 1W * Control Via AT Commands * Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V * Operation temperature: -40â?? to +85â?? * Dimensions: 24 X 24 X 2.6mm * Weight: 3.0g * GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS) Specifications for Data transfer * LTE CAT-M1(eMTC) - Uplink up to 375kbps, Downlink up to 300kbps * NB-IoT - Uplink up to 66kbps, Downlink up to 34kbps * EDGE Class - Uplink up to 236.8Kbps, Downlink up to 236.8Kbps * GPRS - Uplink up to 85.6Kbps, Downlink up to 85.6Kbps Other features * USB Driver for Microsoft Windows XP/Vista/7/8 * USB Driver for Windows CE/Mobile * USB Driver for Linux/Android * Firmware update via USB * TCP/IP * PPP * SMS * EMAIL * FTP/HTTP/SSL * VoLTE* * FOTA* Interfaces * USB2.0 x1 (high-speed) * UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO) * SIM card x1 (1.8V and 3V) * I2C x1 * GPIO x5 * ADC x1 Consumption * Power off: 7uA * PSM: 9uA * Sleep: 1mA * Idle: 11mA
4G with SIM card holder is a wireless module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/UMTS/GSM/GPS/GLONASS(Optional) network. On LTE-FDD network, 4G with SIM card holder enables connect to the Internet at DL data speed up to 150Mbps and UL data speed up to 50Mbps. In the area where LTE service are not available, 4G with SIM card holder still enables reliable and secure data connect over 3G(UMTS) or 2G(GSM) network. 4G with SIM card holder provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc. General features: EDGE multi-slot class 33 GPRS multi-slot class 33 Compliant to GSM phase 2/2+ Output power: - Class 3 (0.25W) for LTE/UMTS - Class 4 (2 W) for GSM 900 - Class 1 (1 W) for GSM 1800 Control via AT commands (3GPP TS27.005/3GPP TS27.007 ) Supply voltage range 3.3V- 4.2V Low Power consumption - Sleep mode: 3mA - Power down: 16 �¼A Dimensions: 51.0�?30.0�?4.6mm Operation Temperature: -40�°C to +85�°C MSL : 3 Band Configuration LTE-FDD Band 1/3/5/7/8/20/28 LTE-TDD Band 38/40 UMTS Band 1/5/8 GSM Band 3/8 Specifications for GNSS GPS frequency: 1575.42MHz At least support 44 channels Sensitivity - Acquisition: -158dBm - Tracking: -162dBm TTFF - Cold Start: 28s - Warm Start: 18s - Hot Start: 1s Specifications for data Support Release 11 Category 4 LTE-FDD up to 150 Mbps DL,50 Mbps UL LTE-TDD up to 130 Mbps DL,35 Mbps UL DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL EDGE class 33: 296Kbps DL,236.8Kbps UL GPRS class 33: 107kbps DL,85.6kbps UL CSD up to 14.4 kbps Non transparent mode PBCCH support PPP-stack Coding schemes CS 1,2,3,4 FOTA TCP/IP NDIS Specifications for SMS Point-to-point Mo and MT SMS cell broadcast Text and PDU mode Protocols TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/ SMTP*/ SMTPS*/ MMS/ FTPS*/ NTP/ PING/ QMI/ SSL/ NITZ/ CMUX/ MQTT* Additional features VoLTE Phone book PCM DTMF Interfaces: RF connector PCI Express�® Mini Card Interface - Power supply - USB 2.0 high speed - UICC/SIM/UIM card interface 3V, 1.8V - UART - Analog Audio - PCM Antenna connector SIM Card Holder Approvals: RoHS / CE / GCF / RCM / NCC
SIM7600X-H-PCIE is a complete multi-band LTE-FDD/LTE TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in Mini PCIE type which supports LTE CAT4 up to 150Mbps for downlink and 50Mbps for uplink data transfer.It is combined with a SIM7600X-H (LCC) module and a Mini PCIE adapter board. Target market: EMEA/Korea/Thailand SIM7600E-H-PCIE * Support 4G LTE FDD Band B1/B3/B5/B7/B8/B20 and TDD Band B38/B40/B41 * Support 3G UMTS/HSPA+ B1/B5/B8 * Support 2G GSM/GPRS/EDGE B3/B8 * GSM/GPRS/EDGEB3/B8 General features * Mini PCIE package * Control Via AT Commands * Supply voltage range: 3.0V~ 3.6V, 3.3V Typical * Operation temperature: -40â??to +85â?? * Bandwidth: 1.4/3/5/10/15/20MHz * 3GPP E-UTRA Release 11 * Dimensions: 50.8*31*5.35mm * Weight: 12.6g Specifications for Data transfer * LTE Downlink up to 150Mbps, Uplink up to 50Mbps * HSPA+ Downlink up to 42Mbps, Uplink up to 5.76Mbps * WCDMA Downlink/Uplink up to 384Kbps * EDGE Downlink/Uplink up to 236.8Kbps * GPRS Downlink/Uplink up to 85.6Kbps Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8/Win10 * USB Driver for Linux /Android * RIL supporting for Android 2.4/4.0/5.0/6.0/7.0 * MBIM to Win8 * Firmware update via USB * TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/SMTP/SMTPS/DNS * SSL3.0/TLS1.0/TLS1.2 * DTMF (Sending and Receiving) * Audio Playing * USB Audio and VoLTE * FOTA * eCall* Interfaces * USB2.0 with High speed up to 480Mbps * UART * GPIO * Antenna: Solder pads for Primary, Rx-diversity and GNSS antennas * (U)SIM card (1.8V/3.0V) * Digital Audio through PCM * Analog Audio (Optional) * Embedded SIM card socket (Optional) * GNSS: GPS/GLONASS/Beidou/Galileo*
30W-ICS Repeater: Interference Cancellation System (ICS) Repeater is a personal network enhancement device with inbuilt Interference Cancellation System ICS Repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
A DAS is a system of managed hubs and remote antennas that distributes a wireless signal to a series of connected indoor or outdoor multi-band, multi-technology radio heads. ... A main hub takes that signal, digitizes it, and distributes it to other hubs and radio heads via a high-bandwidth fiber optic network
Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction. Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc. Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
The RF front-end stage of the communication system is composed of passive devices such as a filter, a duplexer, a power combiner, an RF connector, and an RF switch. These passive devices are designed to maintain the possible linear characteristics in the operating range, but they have practically nonlinear characteristics. Passive intermodulation occurs when two or more different frequencies are used as inputs to a passive device having nonlinear characteristics. This phenomenon is called Passive IM (PIM). Intermodulation (PIM) signals are added as unwanted noise to an uplink band in a mobile communication system, which is a major noise source that deteriorates the signal to noise ratio (SNR). Therefore, the intermodulation (PIM) signal, which may cause a lot of losses in terms of operation, maintenance, and frequency use efficiency of the mobile communication system equipment, should be removed. A system for removing an intermodulation (PIM) signal existing in an uplink band of a mobile communication system is called a PICS (Passive Intermodulation Canceller System).
The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
5W-ICS Repeater: The 5W High Power 2G 3G 4G Cell Booster Long Distance ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). The ICS Repeater (Interference Cancellation System) is a new kind of single-band RF repeater that can automatically detect and cancel the interference signals caused by oscillation of RF feedback between the Donor and Coverage Antennas in real time by adopting DSP (Digital Signal Processing) technology. It can continuously and stably cancel the interference signals and be adapted to any changes in the surrounding RF environment.
Yingfa Mns Fastskin Jammer Specialty For Competition
C9200-24T-E C9200-NW-E-24 C9200-NM-4X CAB-TA-IN PWR-C5-BLANK C9200-DNA-E-24 NETWORK-PNP-LIC C9200-48P-A C9200-NW-A-48 C9200-NM-4X CAB-TA-IN PWR-C5-BLANK C9200-DNA-A-48 PI-LFAS-T NETWORK-PNP-LIC C9200-48T-E C9200-NW-E-48 C9200-NM-4X CAB-TA-IN PWR-C5-BLANK C9200-DNA-E-48 NETWORK-PNP-LIC C9200L-24P-4G-E C9200L-NW-E-24 CAB-TA-IN PWR-C5-BLANK C9200-STACK-BLANK C9200L-DNA-E-24 NETWORK-PNP-NONE C9200L-24T-4G-E C9200L-NW-E-24 CAB-TA-IN PWR-C5-BLANK C9200-STACK-BLANK C9200L-DNA-E-24 NETWORK-PNP-NONE C9200L-48P-4G-E C9200L-NW-E-48 CAB-TA-IN PWR-C5-BLANK C9200-STACK-BLANK C9200L-DNA-E-48 NETWORK-PNP-NONE C9200L-48P-4X-A C9200L-NW-A-48 CAB-TA-IN PWR-C5-BLANK C9200-STACK-BLANK C9200L-DNA-A-48 PI-LFAS-T NETWORK-PNP-NONE C9200L-48P-4X-E C9200L-NW-E-48 CAB-TA-IN PWR-C5-BLANK C9200-STACK-BLANK C9200L-DNA-E-48 NETWORK-PNP-NONE C9200L-48T-4G-E C9200L-NW-E-48 CAB-TA-IN PWR-C5-BLANK C9200-STACK-BLANK C9200L-DNA-E-48 NETWORK-PNP-NONE IE-3300-8P2S-E IE-3300-8T2S-E IEM-3300-14T2S= IEM-3300-16P= IEM-3300-16T= IEM-3300-6T2S= IEM-3300-8P= IEM-3300-8S= IEM-3300-8T= CDB-8P CDB-8U CDB-MNT-FLEX-C14= CAB-IND-10A C9500-12Q-E NETWORK-PNP-LIC S9500UK9-169 C9500-NW-E PWR-C4-950WAC-R PWR-C4-950WAC-R/2 CAB-TA-IN C9500-24Y4C-A C9500-NW-A S9500UK9-169 C9K-PWR-650WAC-R CAB-IND-10A C9K-F1-SSD-BLANK C9K-PWR-C5-BLANK C9K-T1-FANTRAY C9500-DNA-24Y4C-P ISE-BASE-T ISE-PLS-T SWATCH-T PI-LFAS-T NETWORK-PNP-LIC C9500-24Y4C-E C9500-NW-E S9500UK9-169 C9K-PWR-650WAC-R CAB-IND-10A C9K-F1-SSD-BLANK C9K-PWR-C5-BLANK C9K-T1-FANTRAY C9500-DNA-24Y4C-E NETWORK-PNP-LIC C9500-48Y4C-A C9500-NW-A S9500UK9-169 C9K-PWR-650WAC-R CAB-IND-10A C9K-F1-SSD-BLANK C9K-PWR-C5-BLANK C9K-T1-FANTRAY PI-LFAS-T NETWORK-PNP-LIC C9500-DNA-48Y4C-P ISE-BASE-T ISE-PLS-T SWATCH-T C9500-48Y4C-E C9500-NW-E S9500UK9-169 C9K-PWR-650WAC-R CAB-IND-10A C9K-F1-SSD-BLANK C9K-PWR-C5-BLANK C9K-T1-FANTRAY C9500-DNA-48Y4C-E NETWORK-PNP-LIC C9500-4PT-KIT=
WS-C3850-48XS-S WS-C3850-48XS-E WS-C3850-24XS-S WS-C3850-24XS-E WS-C3850-48XS-E WS-C3850-24XU-E WS-C3850-24XU-S WS-C3850-12S-S WS-C3850-12X48U-E WS-C3850-12X48U-S WS-C3850-12S-E WS-C3850-24S-E WS-C3850-12XS-E WS-C3850-24T-E WS-C3850-48T-E WS-C3850-24P-E WS-C3850-48P-E WS-C3850-48F-E WS-C3850-24U-E WS-C3850-24U-L WS-C3850-12XS-S WS-C3850-48U-E WS-C3850-48P-S WS-C3850-48T-S WS-C3850-24P-S WS-C3850-24S-S WS-C3750X-48P-L WS-C3750X-48T-L WS-C3750X-48P-S WS-C3750X-24P-L� WS-C3750X-24T-L WS-C3750X-24S-S WS-C3650-48TQ-E WS-C3650-48PQ-E WS-C3650-48PQ-S WS-C3650-48FQ-E WS-C3650-48FQ-L WS-C3650-48FD-S WS-C3650-48PD-E WS-C3650-48FD-E WS-C3650-24TS-E WS-C3650-24TS-L WS-C3650-24TS-S WS-C3650-48TS-E WS-C3650-48TS-S WS-C3650-24PS-E WS-C3650-24PS-L WS-C3650-24PD-S WS-C3650-48PS-E WS-C3650-48PS-S WS-C3650-48FS-E WS-C3650-24TD-E WS-C3650-24TD-S WS-C3650-48TD-E WS-C3650-24PD-E WS-C3650-48TQ-L WS-C3650-24PS-S WS-C2960X-48FPD-L WS-C2960X-48FPD-X WS-C2960X-48LPD-L WS-C2960X-24PD-L WS-C2960X-24PS-L WS-C2960X-48FPS-L WS-C2960X-48LPS-L WS-C2960X-48TS-L WS-C2960X-48TD-X WS-C2960X-24TS-L WS-C2960X-24TS-LL WS-C2960XR-48LPD-I WS-C2960XR-24PD-I WS-C2960XR-48FPS-I WS-C2960+24TC-L WS-C2960-24PC-L WS-C2960-48PST-L ISR4431/K9 ISR4321/K9� ISR4321-V/K9 ISR4321-AX/K9 ISR4331/K9 ISR4331-V/K9 ISR4331-AX/K9 ISR4331-SEC/K9 ISR4351-SEC/K9 ISR4351-AX/K9 ISR4331-V/K9 STACK-T1-50CM ASA5525-K9 ASA5515-k9 ASA5506-K9 ASA5516-FPWR-K9 ASA5545-FPWR-K9 ASA5525-SSD120-K9 ASR1001-X AIR-CAP2602I-C-K9 AIR-CAP3702E-B-K9 AIR-AP2802I-E-K9 AIR-CT2504-5-K9 CISCO1941/K9 CISCO3925/K9 CISCO2951-SEC/K9 CISCO2911-V/K9 C4KX-PWR-750DC-R C881-K9 C881-K10 C3850-NM-4-10G C6800-8P10G
C921-4P SL-900-IPB GREEN-OPTION CAB-IND SC900UK9-15803M C931-4P SL-900-IPB GREEN-OPTION CAB-IND SC900UK9-15803M C927-4P PWR-30W-I-AC SL-900-IPB GREEN-OPTION CAB-IND SC900UK9-15803M C926-4P PWR-30W-I-AC SL-900-IPB GREEN-OPTION CAB-IND SC900UK9-15803M ACS-900-RM-19= C1111-4P PWR-66W-AC-V2 SL-1100-4P-IPB CAB-IND SISR1100UK9-169 C1111-8P PWR-66W-AC-V2 SL-1100-8P-IPB CAB-IND SISR1100UK9-169 C1116-4P PWR-66W-AC-V2 SL-1100-4P-IPB CAB-IND SISR1100UK9-169 FW-VA-1116-39G1 C1117-4P PWR-66W-AC-V2 SL-1100-4P-IPB CAB-IND SISR1100UK9-169 FW-VA-1117-39T C1101-4PLTEP P-BLANK SL-1100-4P-IPB PWR-30W-I-AC CAB-IND SISR1100UK9-169 C1111-8PLTEEA PWR-66W-AC-V2 EM7455-LTEA-EA SL-1100-8P-IPB LTE-ANTM-D CAB-IND SISR1100UK9-169 FW-7455-LTE-GN NETWORK-PNP-LIC C1121-4P SL-1K-4P-IPB PWR-66W-AC-V2 GREEN-OPTION SISR1100UK9-1612 C1121-8P PWR-66W-AC-V2 SL-1K-8P-IPB CAB-IND GREEN-OPTION SISR1100UK9-1612 C1111-4PWD SW1815I-ME-S-88 PWR-66W-AC-V2 SL-1100-4P-IPB CAB-IND SISR1100UK9-169 ISR4321-V/K9 SL-4320-UC-K9 SL-4320-IPB-K9 PWR-4320-AC CAB-AC-C5-EUR MEM-FLSH-4G MEM-4320-4G NIM-BLANK SISR4300UK9-166 ISR4321/K9 SL-4320-IPB-K9 PWR-4320-AC CAB-AC-C5-C14 MEM-FLSH-4G MEM-4320-4G NIM-BLANK SISR4300UK9-166 ISR4331-SEC/K9 SL-4330-IPB-K9 PWR-4330-AC CAB-IND SL-4330-SEC-K9 MEM-FLSH-4G NIM-BLANK MEM-43-4G SM-S-BLANK SISR4300UK9-166 ISR4331-V/K9 SL-4330-IPB-K9 SL-4330-UC-K9 PWR-4330-AC CAB-IND MEM-FLSH-4G PVDM4-32 NIM-BLANK MEM-43-4G SM-S-BLANK SISR4300UK9-166 ISR4331-SEC/K9 SL-4330-IPB-K9 PWR-4330-AC CAB-IND SL-4330-SEC-K9 MEM-FLSH-4G NIM-BLANK MEM-43-4G SM-S-BLANK SISR4300UK9-166 ISR4431-V/K9 SL-44-IPB-K9 PWR-4430-AC CAB-IND SL-44-UC-K9 PWR-COVER-4430 MEM-44-4G MEM-FLSH-8G MEM-4400-DP-2G PVDM4-64 NIM-BLANK SISR4400UK9-166 ASA5506-K9 CAB-IND-10A SF-ASA-K-9.8.2-K8 SF-ASA-FP6.2.2-K9 ASA5506-CTRL-LIC ASA5506-SSD ASA5506-PWR-AC ASA5500-ENCR-K9 ASA5506-SEC-BUN-K9 CAB-IND-10A SF-ASA-K-9.8.2-K8 SF-ASA-FP6.2.2-K9 ASA5506-CTRL-LIC ASA5506-SSD ASA5506-SEC-PL ASA5506-PWR-AC ASA5500-ENCR-K9 ASA5508-K8 CAB-IND-10A SF-ASA-K-9.8.2-K8 SF-ASA-FP6.2.2-K9 ASA5508-CTRL-LIC ASA5508-SSD ASA5500-ENCR-K8 ASA5516-FPWR-K9 CAB-IND-10A SF-ASA-K-9.8.2-K8 SF-ASA-FP6.2.2-K9 ASA5516-CTRL-LIC ASA5516-SSD ASA5500-ENCR-K9 C9200-24P-E C9200-NW-E-24 CAB-TA-IN PWR-C5-BLANK C9200-DNA-E-24 NETWORK-PNP-LIC C9200-NM-4X