Motefilm Ap Transparent Film With Pad Suppliers and Manufacturers

V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5

Item: PVC food cling film Material: PVC Thickness: 8 mic -25 mic, or customized. Width: 25 cm, 30 cm, 35 cm, 40 cm, 45 cm, or customized. Length: 120 m,150 m, 200 m, 250 m,300 m ,350 m ,400 m,450 m,500 m, 800 m, 100 m or customized. Application: 1. Used for food packaging for refrigeration, freezing and other purposes. 2. Used in supermarkets or hotels where food materials, vegetables, fruits, meat, and seafood are stored and preserved. Characters: 1: Hygiene and safety 2. Good gloss and transparency 3. Moderately freshness protection 4. Fine anti-fog performance: 5. Excellent cold resistance 6. Low odor 7. Nice flexibility, proper adhesion and excellent elongation.

Dear buyer, Thanks for the interest in our Boron product. The supply can be done on a consistent basis. Product: Boron( Boron element , Boron minerals) Origin: Turkey Seller: Turkish Government Known boron deposits in Turkey which possesses 73% of world boron reserves; Eski�?ehir â?? K�±rka, K�¼tahya- Emet, Bal�±kesir â?? Band�±rma and Bigadi�§. With the Law No. 2840, the task of producing, operating and marketing boron and boron products in Turkey is carried out by Eti Maden fully supervised by the Government of Turkey. We are ONLY facilitators for the entire process to getting product and not owners nor exporters or sellers. Face to Face Meeting is acceptable for negotiations. Kindly revert if serious and interested

Hello Sir/Mam Thanks for the interest in our Crude oil product We are able to supply you on a consistent basis Origin Available 1 Iran 2 Kazakhstan Payment Terms DLC SBLC BG Sblc via MT760 TT MT103 Specification of Iran light crude oil certificate of origin changeable CHARACTERISTICS UNITS RESULT TEST METHOD Specific Gravity1556 1556 08568 ASTM D5002 API Gravity API 336 ASTM D5002 Sulfur Content total Wt 146 ASTM D4294 HS Content ppm 86 IP 570 Mercaptan Content ppm 60 UOP 163 Nitrogen Content total Wt 0l3 ASTM D5762 Water Sediment Vol

Origin : Brazil ICUMSA : 45 RBU ICUMSA Ash content : 0.04% Maximum by Weight Moisture : 0.04% Maximum by Weight Magnetic Particles: mg/kg 4 Solubility : 100% DRY & Free Flowing Granulation : Fine Standard Polarization : 99.80 Minimum Max AS : 1 P.P.M. Max PS : 1 P.P.M. Max CU : 3 P.P.M. Color: Sparkling White Sediments : NONE Radiation: Normal without the presence of cesium or iodine SO2: Certified SO2 70 MG/KG MAXIMUM Substance : Solid, Crystal Smell : Free of any Smell Crop : Recent Crop

Flour Type 650 Protein 10,5 % min. Gluten 26 % min. Moisture 14,5 % max. Ash 0,65 % max. Gluten Index 80 % min. Sedimentation 35 (ml) min. Delay Sedimentation 40 (ml) min. Falling Number 300-350 sn. Energy 110 (cm2) min. Package PP/KRAFT/PP+KRAFT Net weight 22,5-25-50 KG With the high level of water absorption rate, allows to produce more products The pinholes on composition of pastry seem coordinated and small Pastry's composition is more elastic Pastry is more strong Pastry get in shape more easily Bread does not get stale for a long time. Wheat Flour Type 550 Protein 11 % min. Gluten 29 % min. Moisture 14 % max. Ash 0,55 % max. Gluten Index 80 % min. Sedimentation 35 (ml) min. Delay Sedimentation 45 (ml) min. Falling Number 300-400 (sec.) Energy 110 (cm2) min. Package PP/KRAFT/PP+KRAFT Net weight 25-50 KG With the high level of water absorption rate, allows to produce more products The pinholes on composition of pastry seem coordinated and small Crust seem dazzled and nice shaped The volume of bread looks bigger Pastry's composition is more elastic Knife cut is excellent. Cake and Pastry Flour Protein 9 % min. Gluten 22 % min. Moisture 14 % max. Ash 0,65 % max. Package PP/KRAFT/PP+KRAFT Net weight 25-50 KG Gives best color to product Pastry and Cake does not get stale for a long time Pastry and Cake get in shape more easily The volume of product looks bigger The end product looks strong and nice shaped

Locust bean gum is a natural hydrocolloid extracted from locust tree seeds. The endosperm of carob seeds are separated from germ and testa by various processes then ground to locust bean gum. Locust bean gum imparts smooth flow properties, freeze- thaw stability and appropriate thickening to a wide range of products. It also improves gel strength when used in combination with K-Carrageenan. Locust Bean Gum provides brightness high viscosity the whitest coloured and highest gel strength. Locust bean gum dissolves completely above 75 C. Usage level : 0.1 â?? 0.9 %. We mainly produce the following Locust bean Gum grades; Locust Bean Gum A-01 (2800 -3000 cps):Top grade Locust Bean Gum suitable for the products where high viscosity and whiteness are important. Locust Bean Gum A-02 (2400- 2600 cps): Medium grade Locust Bean Gum suitable for the products where high viscosity is not very important. Locust Bean Gum A-03 (2000 -2200 cps): Standard grade Locust Bean Gum suitable for the products where both high viscosity and whiteness are not very important.

HAZELNUT IN SHELL CALIBRATION From 16 up to 21+mm with 1-2 mm size differences PACKING 25/50 kg PP bags STANDARD MARKING Description, size, crop, producer, origin, weight, lot, best before SHELF LIFE 12 months in PP bags ORGANOLEPTIC APPEARANCE Uniform,whole and sound kernels TASTE/ODOUR Typical TEXTURE Sound COLOUR Typical, dark brown CHEMICAL& PHYSICAL APPEARANCE Regular-shaped, whole TASTE/SMELL Clear and unmistakable of hazelnut COLOUR Brown, typical for variety MOISTURE 7% max. (if grinded with shell max.12%) FAT CONTENT 55% -68% FREE FATTY ACIDS 0,7% max PEROXIDE 0,7 mEq/kg max AFLATOXIN B1 2 ppb max AFLATOXIN B1+B2+G1+G2+ 4ppb max FOREIGN MATTERS 0,25% SHELL.SKIN PARTS 0.2% max DEFECTS 7% max. (insect damaged, shriveled, moulded, rancid-lemonous, sour UNDER/OVER CALIBRE +/- 10% max EMPTY RATIO 8 pcs /100pcs HAZELNUT KERNELS DESCRIPTION CALIBRATION From 9 up to 15+mm with 1-2 mm size differences PACKING 25/40/50 kg PP bags, 50/80kg jute bags,1000kg big bags STANDARD MARKING Description, size, crop, producer, origin, weight, lot, best before SHELF LIFE 12 months in jute or big bags ORGANOLEPTIC APPEARANCE Uniform, whole and sound kernels TASTE/ODOUR Typical fresh hazelnut taste, free from foreign odours TEXTURE Firm and crispy COLOUR Typical, brown CHEMICAL&PHYSICAL MOISTURE 6% max. FAT CONTENT 55% -68% FREE FATTY ACIDS 0,7% max PEROXIDE 0,7 mEq/kg max. AFLATOXIN B1 2 ppb max. AFLATOXIN B1+B2+G1+G2+ 4ppb max. FOREIGN MATTERS 10 pcs max. (except unshelled and shell pieces) DEFECTUOUS 2.0% max (inner/visible rotten, inner/visible mouldy, rancid, lemonous) BROKEN 1%max UNDER/OVER CALIBRE +/- 5% max. MECHANICALLY DAMAGED 7% max. SHRIVELLED, LEMONOUS 4% max. MICROBIOLOGICAL TOTAL PLATE COUNT 20000/gr. max. SALMONELLA absent/25gr. E.COLI absent/gr. MOULDO YEAST 1000cfu/gr. max STAPH.AUREUS 10 cfu/gr. max. ENTEROBACTERIACEAE 200 cfu/gr. max. TOTAL COLIFORM 100cfu/gr. max.

Product name: grade A sunflower seed Broken: 2% Max Cultivation Type: Common Processing Type: Raw Style: Dried Ceitifications ISO 9001,ISO 22000 Grade: grade A Usage: Oil extraction and human consumption Place of Origin: Ukraine Crop 2020,2021 Color natural color Moisture: 5% Max Storage: Dry Clean Place Avoid Sunlight Amixture: 0.3% Max Packing: 25kg Kraft Paper Bag ,pp vacuum bag,or according to your demands Purity: 99.7 oil extraction: 72% HS Code: 12060010

Criteria RKB Gr.1 RKB Gr.2 RKB Gr.3 RKB Gr.4 Foreign Matter 0.2%Max 0.5%Max 1%Max 1.5%Max Contrasting Seed 0.2%Max 0.5%Max 1%Max 2%Max Under Size Seed 1.5%Max 3%Max 4%Max 5%Max Weevilled Seeds 2%Max 3%Max 5%Max 8%Max Badly Damaged Beans 1.5 3 4 5 Split Seed 2% 3% 5% 8% Broken 2.5%Max 3.5%Max 5%Max 8%Max Moisture Content 14%Max 14%Max 14%Max 14%Max Impurities 6.2%Max 10%Max 15%Max 22.5%Max Purity 93.8% 90% 85% 77.5% Red Kidney Beans 50kg P.P. Bags Loaded in 20'FCL

We offer raw and roasted Pumpkin seeds Specification Moisture 7 Purity 998 Empty seeds 05 Broken seeds 02 MAX Spot seeds 2 MAX Onion seeds 002 MAX Available sizes 58 MM 78 MM 711 MM Cadmium Cd 0010 mgkg Acidity 12 mgKOHg Pieces in 100 g 500550 pcs The product does not contain any Moulds Frozen seeds Yeast Stones or foreign bodies Radioactive elements and live organisms Turkish origin non genetically modified product Packing 20 25 30 kg PP bags Product is processed in accordance with good manufacturing practices and under modern sanitary conditions

Dear Sir/Mme, Thanks for the interest in our quality Fresh & Frozen Chicken Feet & chicken Paws Features: Chicken Feet - Washed and clean. - Without yellow skin. - No feathers. - No bad smell. - No blood. - No bruises. - No black pads. - No traces of carved deep wounds. - No ammonia burns. - Broken bones: under 3%. - Moisture content: less than 5%. - Weight per piece is 45-55g - Length per piece 13-15cm *Specifications:* Chicken Paws - White skin - No broken bones 0% - Outer yellow skin off - Well cleaned and fresh - No bruises - No black pads or ammonia burns - No bad smells - No excessive blood or blood stains - Moisture content is less than 3% - Weight per piece is 35-45g - Length per piece 10-12cm - Drainage: 0 to -5�°C for 8 hours. - Blasted at: -40�°C. - Storage at: -18�°C -Packing: 20kg Carton Boxes Containing 5kg poly bags X 4 in each MOQ: Negotiable Leadtime: Negotiable Payment Options: L/C,T/T, EXW rates. Best Regards.

Dear Sir/Mme, Thanks for the interest in our chicken product. We are delighted to be your supplier. origin: Turkey GRADE A FROZEN CHICKEN Specification: No bruises No black pads or ammonia burns No bad smells No excessive blood or blood stains White skin No broken bones Outer yellow skin off Well cleaned and fresh Moisture content is less than 3% No excess water Storage conditions: -18 �°C and lower Freezing type: IWP, IQF Shelf Life: 12 Months MOQ: 27MT (1*40' Container) *We can supply kinds of frozen chicken cuts: Frozen whole chickens Frozen chicken breasts Frozen chicken legs(leg quarters) 1. halal whole chicken 2. chicken leg quarters 3. chicken breasts 4. chicken wings 5. chicken feet and paws 6. chicken drumsticks 7. chicken gizzards Quality Inspection: - Halal Approved - SGS Inspection before shipment - Turkish Food Inspection Payment term: LC at sight / TT MOQ: 100MT

Hello, Thanks for requesting quotations of our quality white chickpeas. Origin:Turkey, Russia and Tanzania Specs. Dried mature grains clean, uniform in size and shape. Fit for human consumption. Shall be free from abnormal flavors. Free from undesirable odor. Shall be free from micro organisms, fungi or other poisonous or deleterious Foreign matter 1% max. Inorganic matter 0.1% Broken grains 1% max. Rotten and diseased grains 0.5% max. Filth 0.1% max. Total defective grains 2% max. Moisture 13% max. Please kindly mention the standard or specifications required. Could you confirm the port of delivery for the CIF rate. We also work on a FOB basis. MOQ is One twenty-foot container. Payment term : LC at sight/TT Best regards

Hello Sir/Mme, Thanks for requesting quotations of our Soya Bean Seeds. Please confirm what you quantity and port of delivery. Specifications for Soya Bean Seeds PURITY: 99% MIN FOREIGN MATTER: 1% MAX MOISTURE: 10% MAX SPLIT: 2% MAX PROTEIN: 37-42% MAX DAMAGES: 1.5-3% MAX OIL CONTENT: 18-19% ORIGIN: BRAZIL Free from broken seeds High nutritional value Long shelf Life Rich aroma & Strong Flavour Optimum freshness Free from impurities Constant color Rich in protein and minerals Pure and fresh Unadulterated PACKING: PP BAG or as per buyer requirements Also,confirm the port of delivery for the CIF rate. MOQ:1 * 20ft container Payment term : 100% LC at sight/TT/30% and 70% CAD or documents.