The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
Product Name: LITHIUM IRON PHOSPHATE CARBON COATED CAS NO.:15365-14-7 Appearance: Black Powder Purity:99% Melting Point:>300 �°C Application Due to the inherent structural stability of lithium iron phosphate, especially its unparalleled advantages in safety and cycling performance, batteries using lithium iron phosphate cathode materials can be widely used in multiple fields.
Heparin Lithium is a mucopolysaccharide substance, is the sodium salt form of glucosamine sulfate extracted from the intestinal mucosa of pigs, cattle, and sheep. Commonly used heparin anticoagulant, heparin sodium, potassium, lithium, ammonium salt, heparin lithium is the best. 1. The treatment of various diseases concurrent disseminated intravascular coagulation early. 2. Prevention of arterial and venous thrombosis and pulmonary embolism. 3. Treatment of arterial and venous thrombosis and pulmonary embolism, ischemic stroke, unstable angina (to alleviate the symptoms, prevention of myocardial infarction), acute myocardial infarction (prevention of early reinfarction and infarct extension, reduce mortality). 4. The artificial lung, peritoneal dialysis or hemodialysis as anticoagulants. 5. thrombolytic therapy as maintenance therapy. 6. Heparin lithium used for the prevention of blood coagulation and blood bank transfusion of blood and other body save.y save.
Ion exchange is a promising technology for lithium extraction from salt lakes that can overcome some of the limitations of solar evaporation. However, it also requires more research and development to optimize its performance and feasibility. Ion exchange is one of the many direct lithium extraction (DLE) technologies that aim to improve the efficiency and sustainability of lithium mining Call me about lithium extraction materials .
in Frankfurt 360kg available.
"Lithium adsorption Material ""Bojie"" brand BMLi lithium resin is a specially designed and synthesized lithium ion screen. Based on the small radius of lithium ions, the special pore structure of the extraction agent can make lithium ions enter the crystal layer, but magnesium, sodium and calcium plasma can not enter, so as to achieve the efficient selective adsorption of lithium ions. The adsorption, desorption and regeneration of lithium extraction agent are carried out at room temperature. For ph5.5-7, the ratio of magnesium to lithium is tens to hundreds. Lithium content in dozens to hundreds of PPM brine has excellent adsorption separation effect."
NEBA Li Metal is high pure lithium metal (purity 99.9%) for the application of Li batteries as anode and cathode materials.
we are offering lithium raw or processed products kindly contact us for more details visit cryptoxhop origin china
Lithium Carbonate 98.5 Spot 420 Tns Fob Or Cif Bolivia/ Chile LITHIUM MINE - LITHIUM MINE + Rubidium - Investment - 20% equity - YES Mining permit Rb 145,129 tons reserves Li 1% �?�¢?? 72,565 tons reserves 17372,21 hectare Sn, CaF2, Ta-Nb mineralization which is formed along with lithium mineralization is distributed within the zone along with many muscovite biotite pegmatics. Mongolia Dundgobi Ulziit soum $20 million Oortsog Tenant Li.1.TD.
We are the products direct end sellers and the goods come from our direct mining sources from eastern Africa. Buyer and seller agree on price and other terms and sign contract. 1 million MT of lithium ore currently available in inventory. A conference call with the seller mandate and mining executive can be arranged.
Hard rock lithium concentrate from a pegmatite vein. Min 6% Li2O
NEBA Li Metal is high pure lithium metal for the application of Li batteries as anode and cathode materials. The products are covered from lithium metal ingot to the processed products such as ingot, ultra thin foil (sheet), thin foil inlayed Cu foil, Chip, powder, and alloy.
NEBA Li Metal is high pure lithium metal for the application of Li batteries as anode and cathode materials.
The products are covered from lithium metal ingot to the processed products such as ingot, ultra thin foil (sheet), thin foil inlayed Cu foil, Chip, powder, and alloy.
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.
Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable