Napkins per Cycle 4 to 7. Power 230 V, 10 Amp, 50 Hz. Electric Heater - 800 W. Auto power cut off Yes. No. of napkins per cycle 4 to 7. No. of Cycles per day- 9 to 10 (in 12 hours). MS body PU painted. Housing External - CRCA Steel of 1.2 mm. Housing Internal - Insulated type. Insulation - Thermal ceramic sheet with Glass wool of 4-5 mm thick Emission Outlet - 2 inch on top. Flue gas pipe - 2 meter. Residue Ash - Sterlite Ash < 2gm per cycle. Door Design - Thermal insulated door. MCB rating - 16 Amp C Series. Electric cable - 2.5 meters. Dimensions (LXWXH) mm 320X230X520. Weight 18 kg
Agriculture & Food , Apparel & Accessories , Arts & Crafts , Auto, Motorcycle Parts & Accessories , Industrial Equipment & Components , Light Industry & Daily Use , Lights & Lighting , Manufacturing & Processing Machinery , Metallurgy, Mineral & Energy , Office Supplies
Industrial machinery.
1- Arenco: 2nd hand rebuilt lines in running condition. 2-313- Hearing :this automatic device represents the advanced design of the automatic device of type 311; on herring 313 automatic device of submission and alignments splints Here it is established above the type-setting device. Internal and external boxes move the tape conveyor in separate the bunker for the boxes which are taking place above the automatic device 313 or near to it (him). On 16 internal boxes submit with the help of the steel tape conveyor to the filling device under which always there are 32 boxes so in each box splints jam on two times. Type-setting rods in the machine 313 of 1810 mm, width of 56 mm and thickness of 8 mm have length. In eight numbers (lines) is present only 1440 apertures. During pushing out splints are pushed out from two numbers (lines) that corresponds (meets) to 380 apertures. 380 x 120 of revolutions in one minute = 45600 splints in one minute or 2.700.000 splints. At the maintenance (contents) in each box on 50 splints 208 apertures are closed and the same quantity (amount) of channels of the type-setting device is closed. At the maintenance (contents) in each box on 40 splints some more apertures in rods of channels of the type-setting device are closed.
Machinery and tools.
1) The 4~ 6t/h boiler uses quick fitting structure, very easy for installation and save boiler room space; 2) The boiler of 6 ~ 25t/h is composed of 2 main parts: the upper body which is for heat exchange, and lower body for fuel combustion 3) All boiler parts are assembled according to the international standards as customers required, Including GB, ASME, EN, IBR and so on. Safety is the most concerned issue for our customers . 4) Quick installation we provide supervision service to customers for installation and commissioning work so the new boiler can operate quickly after delivery. 5) Economic for long term operation With reasonable design to the boiler structure and equipped with quality auxiliary machines, our boiler saves a lot in fuel consumption and can reach the highest efficiency as designed for long term operation. 6) Low cost on maintenance As we use international standard material for assembling boiler parts and with high quality auxiliary 1. Way of delivery: by Sea or Railway or truck based on needs 2. Shipping model: by normal container and flat rack or bulk cargo based on goods, we can suggest the container 3. Customers specifying freight forwarders or we send bottom shipping price from our forwarder partner for your reference, negotiable shipping methods 4. Packing: nude for boiler main part in nude, accessories in export-use wooden box 5. Payment Terms: T/T, LC; 30% deposits; 70% balance before delivery.
Available Colors:- Red, Blue, Green . Innovative Sil-Vac Technology. Safe and Easy to Handle. Dual Mode Power Switch. Stainless steel High performance food grade standards blade. Advance Anti-skid, Anti-vibrationqualities for Superior stability.
Tumblast type machines are basically designed for batch type operation. Tumblast Machine consists of Vertical/Horizontal door. Components to be blasted are loaded on to the endless rubber conveyor of the machine from this door. One No. of Blast wheel unit, is strategically placed at the top of the Blast cabinet will fire abrasive at high velocity on the tumbling components and blast cleans them thoroughly. Tumbling action of the rubber belt conveyor ensures that each and every portion of the component will get exposed to the blast stream for through cleaning. For unloading the components from the machine, door of the machine is opened and rubber belt conveyor is made to move in reverse direction and blasted components is then get collected into the Bin/Tray (under customer scope).
Product Details: Product Type L Other Technology : Other Power Source : Pneumatic Operating Type: Semi Automatic Power : 420 Volt (v) Pressure : 6-7 Bar Surface Treatment : Painted Supply Ability : 7-10 Unit Per Month Price Range 50000.00 - 110000.00 INR/Unit Minimum Order Quantity : 1 Unit Power : 420 Volt (v) Operating Type : Semi Automatic Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Color Dark Blue Surface Treatment Painted Weight (kg) Not Applicable Metric Ton Power Source Pneumatic Product Type Other Usage/Applications Casting, Forging, Sheet metal etc Technology Other Applications of the portable blaster : De-sanding and de-coring of castings. Descaling of castings, forgings parts. For creating rough surface inside and outside of heavy structure, pressure vessels, pipes for proper bounding of the primer/paint. Can also be used in Wooden industry for decorative design purpose. For creating textured/rough surface on different type of paving blocks, marbles, granite for their proper bounding on surface. For removal of heat treatment scale, welding flux , corrosion, rusting in steel components. For engraving / creating design, etching on different type of stones and metals. For removal of old paint from metal surface of ships and other structural steel components. Specification: Power 5 Hp Capacity 200 Kg Material Stainless Steel Automation Grade Semi Automatic Application Rust Removal, Surface Finishing Motor Phase Three Phase Voltage 220-240 V | 50 Hz No. of Wheels 3
Product Details: Product Type Other Technology Other Power Source Pneumatic Operating Type Semi Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 50000.00 - 125000.00 INR/Unit Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Color Dark Blue Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet Metal Technology Other Operating Type Semi Automatic Pressure 6-7 Bar Surface Treatment Painted Power Source Pneumatic Portable Sand Blaster Applications of the portable blaster : De-sanding and de-coring of castings. Descaling of castings, forgings parts. For removal of heat treatment scale, welding flux , corrosion, rusting in steel components. For engraving / creating design, etching on different type of stones and metals. For removal of old paint from metal surface of ships and other structural steel components. For creating rough surface inside and outside of heavy structure, pressure vessels, pipes for proper bounding of the primer/paint. Can also be used in Wooden industry for decorative design purpose. For creating textured/rough surface on different type of paving blocks, marbles, granite for their proper bounding on surface. Specification: Power 7 Hp Capacity 500 Kg Material Stainless Steel Automation Grade Manual Application Paint Removal Voltage 220-240 V | 50 Hz Motor Phase Single Phase No. of Wheels 3
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 4 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price 325000.00 INR/Unit Product Specifications: Usage/Applications Casting, Forging, Sheet metal etc Surface Treatment Painted Power 420 Volt (v) Weight (kg) Not applicable Metric Ton Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Product Type Other Operating Type Automatic Pressure 6-7 Bar Color Dark Blue Technology Other Rotary Barrel Shot Blasting Machine Rotary Barrel Type Shot Blasting Machine is widely used in small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and fabrications at the lowest possible cost. The rotary barrel blasting machine employs a specialized internal geometry of the rotating barrel which features contoured ridges on the sides. This design facilitates the multi tumbling action of the drum's rotation, that allows the barrel to topple and mix the workpieces. This action makes sure that the blast stream passes through all surface area, thus providing equal and constant blast results. The machine also provides well-cleaned parts surfaces that are sand, rust, or scale free. It is ideal to use in applications requiring the blasting of small, flat, and light components. Technical Specification: Barrel Size: 649 MM Dia. x 625 MM Length Total Weight Capacity: 100 Kg's Volume: 1.5 CFT Total HP Required: 5 HP Specification: Usage/Application Surface Roughness Preparation Number of Doors Single Door Power Required 5 HP Capacity 0-5 ton/day Driven Type Belt Driven No. Of Blast Wheels 1 Wheel Size (inch) 11.5'' X 2.5'' Model Number BT-RBM-01 Flow Rate (kg per hr.) 1600 Kg/Wheel/Hour Motor Hp 3 HP Brand Adl Blastek Automatic Grade Automatic
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 , , Unit Per Month Price And Quantity: Price 325000.00 INR/Unit Minimum Order Quantity 1 , , Unit Product Specifications: Product Type Other Usage/Applications Casting, Forging, Sheet Metal Weight (kg) Approx. 1 Metric Ton Operating Type Automatic Pressure 6-7 Bar Power 420 Volt (v) Color Dark Blue Power Source Electricity Surface Treatment Painted Technology Other Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Drum Type Shot Blasting Machine Rotary Barrel Type Shot Blasting Machine is widely used in small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and fabrications at the lowest possible cost. The rotary barrel blasting machine employs a specialized internal geometry of the rotating barrel which features contoured ridges on the sides. This design facilitates the multi tumbling action of the drum's rotation, that allows the barrel to topple and mix the work pieces. Technical Specification: Barrel Size: 649 MM Dia. x 625 MM Length Total Weight Capacity: 100 Kg's Volume: 1.5 CFT Total HP Required: 5HP
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 450000.00 - 600000.00 INR/Number Product Specifications: Technology Other Color Dark Blue Power Source Electricity Operating Type Automatic Weight (kg) 3.5-4 Metric Ton Pressure 6-7 Bar Usage/Applications Casting, Forging, Sheet metal etc Power 420 Volt (v) Product Type Other Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Description: Tumblast Type Shot Blasting Machine [TB-20X27] Tumblast type machines are basically designed for batch type operation. Tumblast Machine consists of Vertical door. For loading the components, door of the machine is opened manually & components to be blasted are loaded on to the endless rubber conveyor and the door of the machine is closed. After this Blast wheel unit, which is strategically placed at the top of the Blast cabinet, is started. Blast wheel will fire abrasive at high velocity on the tumbling components and blast cleans them thoroughly. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 5 Unit Per Month Price And Quantity: Price Range 1250000.00 - 1450000.00 INR/Number Minimum Order Quantity 1 Unit Product Specifications Pressure 6-7 Bar Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Power Source Electricity Usage/Applications Casting, Forging, Sheet metal etc Power 420 Volt (v)Operating Type Automatic Technology Other Surface Treatment Painted Color Dark Blue Product Description: Tumblast Shot Blasting Machine [TB-36X42] Tumblast type machines are basically designed for batch type operation. Tumblast Machine consists of Vertical door. For loading the components, door of the machine is opened manually & components to be blasted are loaded on tote endless rubber conveyor and the door of the machine is closed. After this Blast wheel unit, which is strategically placed at the top of the Blast cabinet, is started. Blast wheel will fire abrasive at high velocity on the tumbling components and blast cleans them thoroughly. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilizationÃ?? of the abrasive energy. Tumbling action of the rubber belt conveyor ensures that each and every portion of the component will get exposed to the blast stream for through cleaning. After the required blasting cycle, blast wheel unit shuts off. For unloading the components from the machine, door of the machine is opened and rubber belt conveyor is made to move in reverse direction and blasted components is then get collected into the Bin/Tray.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 740000.00 - 950000.00 INR/Number Product Specifications: Weight (kg) 3.5-4 Metric Ton Pressure 6-7 Bar Surface Treatment Painted Color Dark Blue Operating Type Automatic Technology Other Power Source Electricity Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Usage/Applications Casting, Forging, Sheet metal etc Power 420 Volt (v) Product Type Other Product Description Tumblast Shot Blasting Machine (Tb- 27x 36) Tumblast type machines are basically designed for batch type operation. Tumblast Machine consists of Vertical door. For loading the components, door of the machine is opened manually & components to be blasted are loaded on to the endless rubber conveyor and the door of the machine is closed. After this Blast wheel unit, which is strategically placed at the top of the Blast cabinet, is started. Blast wheel will fire abrasive at high velocity on the tumbling components and blast cleans them thoroughly. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Specification: Power Required 24 HP Machine Type Shot Blasting Machine Capacity 300 Kg Per Batch Automation Grade Automatic Die Locking Force 10-20 Ton Voltage 415 V Phase 3 Phase Number Of Doors 1 Wheel Size (inch) 15.5'' X 2.5'' Drum Diameter 686 mm (Dia.) X 915 mm (W) Shot Flow Rate 180 Kg/Wheel/Min Brand Adl Blastek Conveyor Belt Rubber Belt Power Per Blast Wheel 15 HP H.P. of Blast Wheel 15 HP X 1 No. No. of Blades 8 RPM of Blast Wheel 2800 RPM Approx. Shot Velocity (Meter/Second) 70-80 Mtr/Sec Volume in CFT 5 CFT Belt Hole Size (Standard) 8 mm Type of Dust Collector Fabric Bag type Capacity of Dust Collector 2000 CFM Filter Cleaning Arrangement Auto-Shaking Mechanism
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 850000.00 - 1050000.00 INR/Number Minimum Order Quantity 1 Unit Product Specifications: Pressure 6-7 Bar Power Source Electricity Technology Other Operating Type Automatic Color Dark Blue Weight (kg) 3.5-5 Metric Ton Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Surface Treatment Painted Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Product Description: Swing Table type shot blast machines are designed and built asfully integrated blast cleaning systems to handle larger and/or more fragilecastings than barrel machines. They provide a cost effective solution for batch cleaning. Swing Table type Machine consists of Horizontal door with a table type work/job handling system. This table is directly mountedon the door and it rotates on its own axis, drive unit of this swing table isprovided outside the door. This table swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually &components to be blasted are loaded on to the work table area and the door ofthe machine is closed. After this Blast wheel unit,which is strategically placed on the Blast cabinet, is started. Blast wheelwill fire the abrasive at high velocity on the components placed on therotating work table and blast cleans them thoroughly. Rotational mechanism oftable ensures that each and every portion of the component will get exposed tothe blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unitshuts off and door of the machine is opened manually for unloading of thecomponents.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 650000.00 - 950000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Pressure 6-7 Bar Surface Treatment Painted Technology Other Usage/Applications Casting, Forging, Sheet Metal Power 420 Volt (v) Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Operating Type Automatic Product Type Other Color Dark Blue Power Source Electricity Product Description: Table type shot blast machines are designed and built asfully integrated blast cleaning systems to handle larger and/or more fragile castingsthan barrel machines. They provide a cost effective solution for batchcleaning. Table type Machine consists of Horizontaldoor with a table type work/job handling system. This table is directly mountedon the door and it rotates on its own axis, drive unit of this swing table isprovided outside the door. This table swings out as the door is opened, makingthe full area easily approachable for loading and unloading of the components.For loading the components, door of the machine is opened manually &components to be blasted are loaded on to the work table area and the door ofthe machine is closed. After this Blast wheel unit,which is strategically placed on the Blast cabinet, is started. Blast wheelwill fire the abrasive at high velocity on the components placed on therotating work table and blast cleans them thoroughly. Rotational mechanism oftable ensures that each and every portion of the component will get exposed tothe blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unitshuts off and door of the machine is opened manually for unloading of thecomponents.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Surface Treatment Painted Weight (kg) 3.5-4 Metric Ton Supply Ability : 7-10 Unit Per Month Price And Quantity Price Range 850000.00 - 1050000.00 INR/Number Minimum Order Quantity 1 Unit Product Specifications: Weight (kg) 3.5-4 Metric Ton Surface Treatment Painted Operating Type Automatic Technology Other Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Color Dark Blue Power Source Electricity Product Type Other Product Description: Table type shot blast machines are designed and built asfully integrated blast cleaning systems to handle larger and/or more fragilecastings than barrel machines. They provide a cost effective solution for batchcleaning. Table type Machine consists of Horizontaldoor with a table type work/job handling system. This table is directly mountedon the door and it rotates on its own axis, drive unit of this swing table isprovided outside the door. This table swings out as the door is opened, makingthe full area easily approachable for loading and unloading of the components.For loading the components, door of the machine is opened manually &components to be blasted are loaded on to the work table area and the door ofthe machine is closed. After this Blast wheel unit,which is strategically placed on the Blast cabinet, is started. Blast wheelwill fire the abrasive at high velocity on the components placed on therotating work table and blast cleans them thoroughly. Rotational mechanism oftable ensures that each and every portion of the component will get exposed tothe blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unitshuts off and door of the machine is opened manually for unloading of thecomponents.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Other Supply Ability : 7-10 Number Per Month Price And Quantity: Price Range 600000.00 - 800000.00 INR/Number Minimum Order Quantity 1 Number Product Specifications: Product Type Other Pressure 6-7 Bar Technology Other Usage/Applications Casting, Forging, Sheet Metal Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Weight (kg) 4.5-6.5 Metric Ton Operating Type Automatic Power 420 Volt (v) Power Source Electricity Surface Treatment Other Color Dark Blue Product Description Hanger type shot blast machines designed and built as fully integrated blast cleaning systems to handle large/small or more fragile castings than barrel/table type machines. They provide a cost-effective solution for batch cleaning. Hanger typeMachine consists of horizontal door with a rotating hanger type work/job handling system. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside the door. This hanger swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machineis closed. Specification: Number of Doors Single Door Brand Adl Blastek Power Required 14.5 HP Capacity 10-15 ton/day Voltage (V) 415 V Driven Type Belt Driven Wheel No. Of Blast Wheels 2 Wheel Size (inch) 12.5'' X 2.5'' Model Number BT-SPH-1 Load Carrying Capacity Of Hanger (kg) 300 Kg Automatic Grade Automatic Blast Wheel Power 5 HP No. of Door with Hanger Hook 1 Diameter and Height Of Hanger Turning Meter 600 x 700 mm
Product Details: Product Typ e Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 , , Unit Per Month Price And Quantity: Price Range 1200000.00 - 1500000.00 INR/Unit Minimum Order Quantity 1 , , Unit Product Specifications: Power 420 Volt (v) Power Source Electricity Operating Type Automatic Product Type Other Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Technology Other Color Dark Blue Surface Treatment Painted Usage/Applications Casting, Forging, Sheet Metal Product Description: Hanger type Machine consists of horizontal door with a rotating hanger type work/job handlingsystem. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside thedoor. This hanger swings out as the door is opened, making the full area easilyapproachable for loading and unloading of the components. For loading the components,door of the machine is opened manually & components to be blasted arehanged one by one on to the door hanger and the door of the machine is closed. After this two nos ofBlast wheel units which are strategically placed on the Blast cabinet, is started.Blast wheels will fire the abrasive at high velocity on the components hangedon the hangers and rotating in clockwise and Anti-clockwise direction and blastcleans them thoroughly. Bi-directional rotational mechanism of hanger ensuresthat each and every portion of the component will get exposed to the blaststream for through cleaning. The arrangement of the blast wheel ensures optimumblast cleaning and maximum utilisation of the abrasive energy. After the required blastingcycle, blast wheel unit shuts off and door of the machine is opened manuallyfor unloading of the components.
