JHG fire-resistant glass is combined with borosilicate glass and float glass technology, which fire resistant properties much superior to those of sode lime glass , the main character is : * high performance to bear high temperature , our tempered borosilicate glass 4.0 can withstand 120 minutes fire test . * Ultra light ,borostilicate glass 8% less than sode lime glass * Hign soften point in fire * High ligh transmission * No SO2 pollution ,no self-explosion Borosilicate 4.0 Technical data : Size: 1830*3000mm Density (g/cm�?�³) : 2.28�?�±0.1 Co-efficient of expansion (�?�±)(20-300�¢??) : 4.0�?�±0.1�??10-6k-1 Softening point(�¢??) : 845�?�±10 Light transmission :�?� �¢?�¥90(6mm) Main usage : 4.0 building partition ,facade ,door ,ceiling ,floor 3.3 household application ,optics , lighting
China factory competitive price 21.52mm SGP curved tempered laminated safety glass 10104 VSG Introduction 21.52mm SGP curved tempered laminated glass is made from two pieces of 10mm curved tempered glass bonded together with 1.52mm SentryGlas�® (SGP) interlayers, it is well-known as high security glass, because it can withstand the severe weather like storms, hurricane and cyclone, and have high performance of impact resistance and bullet resistance. Advantages Pure clarity: the SGP toughened laminated bent glass are virtually invisible and do not have the slight color variations as seen when using PVB interlayers, this is especially true when used with extra clear low iron glass.� High safety: in the event of breakage, the SGP laminated safety glass fragments remain firmly bonded to the interlayer, and it is still standing, not falling down, reducing the chance for injury. Solar energy control: when the SentryGlas�® use with curved coated low-E glass, it can improve energy efficiency, and help engineer more effective thermally insulated glass, and glass with better controlled (or allowed) transmittance of V radiation. Good durability: DuPont SentryGlas�® offers long-term durability even when edges are exposed to severe weather.� Open edges of laminated glass made with SentryGlas�® are less susceptible to moisture intrusion, and remain free from clouding even after years of exposure. Create aesthetic sense: SGP curved laminated glass allows more overall structural glass to be used with less visible metal support than regular PVB bent laminated glass panels, so architects and designers are free to create nearly transparent, precise metal-free facades that can also meet or exceed the increasing environmental and security demands many projects now require. Application Based on high performance, the SGP curved laminated glass could use as components in double glazed glass structures, and could be considered for many of the following applications: structural and clear point fixed supported balustrades, handrails and staircases ; structural curtain wall facades, canopies, and skylights, regular and point fixed; customized over-sized glass shopfronts, glass screens, glass partition walls, glass fins; windows and doors in hurricane, tornado or earthquake prone areas; jewelry stores, high-end retail, Money Exchange, Exotic Car Dealerships; Many others where need high security.
About Bronze Tinted Tempered Laminated Glass Tinted Laminated Glass is made up of two pieces tinted(bronze, green, blue, grey) glass permanently bonded together with 0.76/1.14/1.52mm PVB inter layer via a controlled, highly pressurized and industrial heating process. The lamination process results in the glass panels holding together in the event of breakage, reducing the risk of harm. Laminated Glass is classified as Grade A Safety Glass. Tinted� Tempered Laminated Glass Characteristic High Security When laminated glass is attacked by outside force, it hard to be penetrated because PVB film has strong tenacity and can absorb and weaken a mass of striking energy. Even if it's broken, the splinters will stick to the interlayer and not scatter. Sound Insulation PVB film is a kind of organic material and it can block sound waves. Therefore, the laminated safety glass offers better sound insulation performance than the pure glass with the same thickness. Create aesthetic sense to building Laminated glass will beautify the buildings and harmonize their appearances with surrounding views which meet the demand of architects.
About 10mm Ultra Clear Tempered Glass door from KXG building glass factory Ultra Clear Tempered glass, also called Low Iron Toughened Glass and extra clear toughened glass. It is made of heating ultra clear low iron glass to 650�°C and cooling it rapidly. After this processing, the 10mm extra clear glass is stronger 4 to 5 times than before. It is a safety glass which is used when strength, thermal resistance and safety are important considerations. 10mm Extra Clear Tempered Glass Door Characteristic 1. High Strength Kunxingâ??glassâ??produceâ??aâ??lotâ??extra clear tempered glass performs well in resisting bending and hitting owing to its high strength which is about five times that of normal float glass. It is able to withstand a surface pressure of 95Mpa. 2. High Safety When the tempered glass is broken, the glass shard is small, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss. 3. High Transparency Super high transparency and a neutral color making it the ideal glass where high visibility and clarity are required. 10mm low iron Tempered Glass Specification 10mm low iron ultra clear toughened glass available size: Maximum 3000*8000mm, Minimum 150*300mm All the processing done on the 10mm super clear toughened glass like polish edges, cut to size, drill holes, cut notches, cutouts, screen printing, acid etched, etc. must be done before tempering. Shapes Except flat 10mm ultra clear toughened glass,â??Kunxing Glass also could do shape 12mm ultra clear toughened glass, like round low iron tempered glass, Trapezoid super white reinforced glass, parallel ultra clear safety glass, etc. 10mm Ultra Clear Tempered Glass Application Most often use as safety railing glass, high transparency aquarium glass, store front wall glass,â??Kitchenâ??Splashbackâ??Glass etc., and use to makeâ??21.52mm low iron laminated glass to use as security stair railing glass, jumbo size balcony glass, elevator glass, etc., and make 10+10+10mm anti-slip laminated glass for floor, etc.
Toughened glass is fabricated by heating annealed glass to over 600C and cooling it rapidly, which locks the outer surfaces of the glass in a state of high compression, and the core or center of the glass in compensating tension. Round clear toughened glass is widely used for table top or center table etc. Advantages of our tempered table top glass High quality: we use high quality tempered with fine edges polished crafts for the table top uses long time uses. Beautiful: our tempered glass for table top, with no bubbles, no scratches, beautiful appearance, for different type of table top uses. Different choice: you can customized different type of glass for your requirement, like clear tempered table top glass, ultra clear tempered table top glass, color tempered table top glass, patterned tempered table top glass, frosted tempered table top glass, etc..
About 10mm Ultra Clear Tempered Glass from KXG building glass factory Ultra Clear Tempered glass, also called Low Iron Toughened Glass and extra clear toughened glass. It is made of heating ultra clear low iron glass to 650°C and cooling it rapidly. After this processing, the 10mm extra clear glass is stronger 4 to 5 times than before. It is a safety glass which is used when strength, thermal resistance and safety are important considerations. 10mm Extra Clear Tempered Glass Characteristic 1. High Strength Kunxing??glass??produce??a??lot??extra clear tempered glass performs well in resisting bending and hitting owing to its high strength which is about five times that of normal float glass. It is able to withstand a surface pressure of 95Mpa. 2. High Safety When the tempered glass is broken, the glass shard is small, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss. 3. High Transparency Super high transparency and a neutral color making it the ideal glass where high visibility and clarity are required. 10mm low iron Tempered Glass Specification 10mm low iron ultra clear toughened glass available size: Maximum 3000*8000mm, Minimum 150*300mm All the processing done on the 10mm super clear toughened glass like polish edges, cut to size, drill holes, cut notches, cutouts, screen printing, acid etched, etc. must be done before tempering. Shapes Except flat 10mm ultra clear toughened glass,??Kunxing Glass also could do shape 12mm ultra clear toughened glass, like round low iron tempered glass, Trapezoid super white reinforced glass, parallel ultra clear safety glass, etc. 10mm Ultra Clear Tempered Glass Application Most often use as safety railing glass, high transparency aquarium glass, store front wall glass,??Kitchen??Splashback??Glass etc., and use to make??21.52mm low iron laminated glass to use as security stair railing glass, jumbo size balcony glass, elevator glass, etc., and make 10+10+10mm anti-slip laminated glass for floor, etc.
Laminated tempered glass is also known as safety glass and can be defined as laminated glass which is broken into small but not sharp pieces in impacts . Laminated tempered glasses, produced by Erdem Cam, are also passed through heating and cooling stages and finalized. The reason for this is explained as imparting pressure stress to the outer surface of the glass and tensile stress to the middle surface. This type of glass, which is widely used in the form of glass doors and glass façades , is known as safety glass due to the fact that it does not break apart as a result of an impact and does not harm the people and objects around it. These risks are carefully reviewed during the production of glasses and the production is carried out by minimizing the risk of injury to persons as well as the unwanted passage of persons and goods from one side to the other.
JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver, JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages SUPMIROR offer more solutions for building fa�§ade and interior decoration. SUPMIROR without paint content, more environment friendly SUPMIROR is easy for processing with tempering, laminating, curving and acid etching. JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside, to transform and decorate rooms, to increase the feeling of space. Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design, with various colour choice, easy to clean, bring more space in modern life. Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side, can be used on door