Real-time waveforms: Paw, Flow, Volume, EtCO2, SPO2 Optional: CO2, SPO2 (related parameters) Loops: P-V, V-Flow, Flow- P Trends: 1s, 5s,1min,10min, 30min, 60min Tidal volume: 5 to 2000mL PEEP/CPAP: 0 to 30 cmH2O Oxygen: 21 to 100% I:E ratio: 1:10 to 4:1 Inspiratory time (TI): 0.2 to 5 s Flow trigger: 0.2 to 15 l/min Pressure trigger: -0.5 to -20cmH2O Pressure control: 5 to 90 cmH2O, added to PEEP/CPAP Pressure support: 0 to 90 cmH2O, added to PEEP/CPAP Pressure ramp: 0 to 2s Expiratory trigger sensitivity (ETS): OFF, 5 to 90 % of inspiratory peak flow Peak flow Spontaneous: > 210 L/min Input voltage: 100 to 240V ~ �?�±10 %, 50 / 60 Hz AC or 24 VDC�?�±10 % Power consumption: 50 W typical Protection class: Class I Backup battery: batteries(5200mAh each)/ hot swappable Oxygen supply: 280 to 600 kPa (41 to 87 psi), 120 L / min Low pressure: oxygen �¢?�¤15 L / min, max. 600 hPa for low pressure Operator-adjustable: Low/high minute volume, low/high pressure, low/high tidal volume, low/high rate, apnea time, low/high oxygen Optional: low/high CO2, low/high SPO2 Special alarms: Oxygen concentration, disconnection, loss of PEEP, exhalation obstruction, flow sensor, power supply batteries, gas supply Loudness Adjustable: 1 to 9 Event log: Storage and display of up to 1000 events with date and time stamp Weight: < 45.3 kg Dimensions(WxHxD): Approx. 600x402x415mm
Big bags, jumbo bags, fibc, bulk bags, pp raffia big bags, pp raffia jumbo bags, woven big bags, flexible intermediate bulk containers, pp raffia woven fabrics, pp woven fabrics, pp laminated woven fabrics, silt fence, weed mat, erosion control fabrics, lumber cover, ground cover fabrics, builder bags, circular bags, u+2 panel bags, single loop bag, 2 loop bag, tunnel bag, baffle bag, un bag, lateral loop bag, asbestos bag, platen bag, ventilated bag, potato big bag, log big bag, garden bag, container liner.
1. Ground water level: more than 1.5m. 2. Soil texture: permeablility or breathability good loam and sand soil, avoid clay, harden, ventilation adverse soil. 3. PH of soil, 6-7.5 is the best, 5-8.9 is acceptable. 4. Good irrigation and drainage systerm will be better. 5. Elevation up to 2000m is acceptable
1048 Evita Beige Glossy (600X600Mm) Tiles Technical Specification Flavour Granito believes in providing excellent customer service. As one of the leading vitrified companies based in Morbi, India, we are driven by a clear vision and a strong mission. Our dedicated team is self-motivated to deliver outstanding products and provide exceptional experiences, all guided by our core values of humanity. With more than 25 years of experience in the ceramic sector, we understand that our customers often face challenges when it comes to technical information and basic queries, such as determining the number of tiles they need for their space. To address these concerns and reduce such inquiries, we have provided the following details: PROPERTIES TEST METHOD ISO STANDARD 13006 B1a TILES OUR VALUE Length and width BS EN ISO 105452 06 03 Thickness BS EN ISO 105452 50 30 Straightness of sides BS EN ISO 105452 05 03 Rectangularity BS EN ISO 105452 06 03 Surface flatness BS EN ISO 105452 05 03 Water absorption BS EN ISO 10545-3 0.5% 0.05% Breaking strength BS EN ISO 10545-4 1300N 1500N Modulus of rupture BS EN ISO 10545-4 35 N/mm2 45 N/mm2 Resistance to deep abrasion BS EN ISO 10545-6 175mm3 150mm3 Linear thermal expansion BS EN ISO 10545-8 9 x 10-6 C1 7 x 10-6 C1 Thermal shock resistance BS EN ISO 10545-9 No visible defect No visible defect Frost resistance BS EN ISO 10545-12 Frost proof Frost proof Resistance to chemicals BS EN ISO 10545-13 No visible effect No visible effect Resistance to stains BS EN ISO 10545-14 Manufacturer to state class Stains removed Min. Class 3 Colour resistance BS EN ISO 10545-16 No damage No damage Colour resistance to UV Light DIN 51094 No change in color No change in color Scratch hardness (MOH's Scale) EN 101 6 MOHS 7 MOHS Surface quality BS EN ISO 10545-2 Min. 95% No visible defect Skid resistance (friction co-efficient) BS EN ISO 10545-17 > 0.4 > 0.4 Moisture Expansion - Nil Nil
The pottery stone ore shown in the earlier photograph is a particularly high-quality special-grade material among our pottery stones. Pottery stones are generally finely crushed, and used as the material for ceramics, bone china, and sanitary ware (toilets, sinks, etc.). Products are shipped out from our mine in sizes of
Silica is mainly used as a carrier of agricultural chemicals. Finely crushed silica powder is coated with agricultural chemicals and sold on the market for agricultural use. Silica itself has no effects; it merely serves as a carrier, and so can be dispersed without affecting the farmland, which makes it advantageous as a core material. It's used as Fire-resistant product powder, Agricultural chemical carrier, Agricultural chemical carrier, Construction board
Like wax candles, Rouseki (Pyrophyllite) is white and semi-transparent, and has a waxy texture when touched. It is very brittle, and tends to crack largely along the stone joints. Up close, this stone looks grayish white, but may look blue from a distance. The ore looks so similar to pottery stone ore that they cannot be distinguished. But there is a difference in their texture, color, and how they crack, and with experience, their differences become more visible. They not only look and feel different, but their applications and properties also differ significantly. It's used as Firebricks, crucibles, glazes, fire-resistant powders, etc.
Zimbabwe "BIKITA minerals (pvt) ltd" production of lithium feldspar and lithium feldspar, compared with many obvious advantages. For example: pure, very low iron content, no need to calcine (refers to the ceramic industry), good results, high efficiency, environmental protection, cost-effective and so on. There are a variety of grades to choose from, can meet the requirements of different industries. Containing 4.0-4.7% lithium.
**Key Specifications/Special Features** Brand: TENAMYD Price: 0.9$/BOX(50pcs) Payment: TT30%-TT70% against SGS Leading time: 14days *50pcs/box, 50box/carton *CE, FDA approved **SOP** -NCNDA, LOI (buyer) -Draft SPA (Seller) -SPA (Both parties) -Payment TT30% -Production, SGS, Delivery -Payment TT70% -END
Key Specifications/Special Features - Brand: bisou Price: 1.0$/BOX(50pcs)/FOB Vietnam Payment: TT30%-TT70% against SGS Leading time: 10days *50pcs/box, 50box/carton *CE, FDA approved SOP -NCNDA, LOI (buyer) -Draft SPA (Seller) -SPA (Both parties) -Payment TT30% -Production, SGS, Delivery -Payment TT70% -END
Key Specifications/Special Features - '-PP non-woven fabric 30gsm(Lev 1): 0.8$/pcs 40gsm(Lev 1): 0.9$/pcs 50gsm: 1.0$/pcs '-PP+PE non-woven fabric 30gsm(Lev 1): 0.9$/pcs 40gsm(Lev 1): 1.0$/pcs 50gsm(Lev 2): 1.1$/pcs '-SMS non-woven fabric 30gsm(Lev 1): 1.1$/pcs 40gsm(Lev 2): 1.2$/pcs 50gsm(Lev 2): 1.3$/pcs *Certificates: CE, FDA *Price is FOB Vietnam.
-Key Specifications/Special Features -15 different types of 1ml, 2ml, 3ml, 5ml,10ml... Price: 0.03$/pcs *1ml with needle, Luer Slip Payment: TT20%-LC80% * The price depends on the types * Price is FOB Vietnam Process / Procedure: 1. Buyer send LOI 2. Seller provide certificates and FCO 3. Buyer sign FCO 4. Sign SPA 5. Buyer pay deposit 6. SGS Inspection 7. Loading / delivery 8. Buyer pay balance
Key Specifications/Special Features Brand: RICA Price: 0.25$/pcs/FOB Cat Lai port (Vietnam) Payment: TT30%-70% against SGS Leading time: 15days *20pcs/box, 50box/carton *CE, FDA approved SOP -NCNDA, PO (buyer) -FCO, Draft SPA (Seller) -SPA (Both parties) -Payment TT30% -Production, SGS, Delivery -Payment TT70% -END